Search results

The purpose of this study was to optimise the dyeing conditions to achieve right-first-time dyeing in hard water. Owing to the persistent water scarcity for more than two decades now, the textile industry in Pakistan is forced to rely on high-mineral-content ground water for use in textile wet processing. Furthermore, the limited amount of municipal water that is at the disposal of the textile industry is also high in mineral content. Thus, on the large scale, water hardness has become an acute problem for the textile processor. In particular, in the dyeing process, water hardness is known to have crucial effects. However, to-date, no systematic study has been conducted on this aspect of textile dyeing.

In this study, 3² full factorial design was used to optimise the dyeing conditions to achieve right-first-time dyeing in hard water. Thus, cotton fabric was dyed with Red Reactive dye (of dyebath concentration at 5, 10 and 15 g/L) in prepared hard water (of hardness at 10, 40 and 70°dH), respectively. Analysis of variance, coefficient of determination (R²) and p-values for the models were used to evaluate the adequacy of the predictive models. The surface plots of the effects were studied to further examine the interactions of two independent variables. Derringer’s desirability function was used to determine the optimum levels of each variable.

Three levels for both independent variables generate second-order polynomial models to predict the colour strength, lightness, red/green, yellow/blue and total colour difference values of dyed cotton. The obtained predictive models point out the considerable influence of both water hardness and dye concentration on right-first-time dyeing.

Such a finding enabled the dye-mill to produce the correct shade at water hardness of 10°dH and 15 g/L dye concentration, without the need for corrective reprocessing.

Corrosion of carbon steel and copper is a troublesome problem in low hardness cooling water systems. A new kind of water stabiliser containing hydroxy phosphonocarboxylic acid, zinc salts and molybdate has been developed. Its performance has been proved by means of weight loss tests and a static state scale‐inhibiting test method. The mechanism was also studied using polarisation tests, scanning electron microscope examination and XPS analysis. The test results showed that the corrosion rate of carbon steel and copper could be reduced to 0.0136 and 0.0010 mm/a, respectively. A compact film containing P, Mo and Zn was formed on the surface of carbon steel, by means of which the steel was protected.

We tend to take water for granted in Britain: we automatically assume that we can drink any water from a tap. In general there seems little doubt that our mains water is of an adequate standard despite much press speculation about our ageing system of water mains and the crumbling sewers. There are, however, a few points to be made.

A. General Damage to boiler plants and heating installations results mainly from the action of oxygen dissolved in the water, from free carbon dioxide and boiler scale formed from the hardness of the water. More detailed information regarding the softening and dealkalisation of boiler feed water can be found in the relevant literature describing our Lewatit ion exchange resins, which we will be pleased to supply on request.

The present research was envisaged with an aim to optimize the system and the product responses for the development of tomato pomace-incorporated corn-based extrudates employing central composite rotatable design and determine its proximate, lycopene, consumer acceptability and storage studies.

Lycopene-rich extrudates were developed from corn flour blended with different levels of tomato pomace. The independent extrusion variables, namely, feed composition (95:5 to 75:25), feed moisture (12–20%), screw speed (200–600 rpm) and barrel temperature (125–185 °C), were studied to determine their influence on dependent variables, namely, specific mechanical energy, hardness, water solubility index, lateral expansion, water absorption index, bulk density and color.

All of the quality parameters were significantly (p < 0.05) influenced by independent variables. The regression models obtained for all the responses showed high coefficients of determination (R2 = 0.85–0.95). The optimum conditions for the development of tomato pomace-incorporated corn-based extrudates were feed composition (90:10), feed moisture (14%), screw speed (300 rpm) and barrel temperature (170 °C). The moisture, fat and carbohydrate contents of the extrudates were significantly reduced, whereas protein, ash and fiber were significantly (p < 0.05) enhanced after the incorporation of tomato pomace. Aluminum laminates were found to be the suitable packaging materials for extrudates for a period of 120 days in comparison to high-density polyethylene packages.

As far as the authors could possibly know, scanty literature exists wherein the tomato pomace has been utilized for the development of lycopene-rich corn-based extruded snacks. Such extrudates with significantly higher fiber and lycopene contents than corn flour will serve as a suitable alternative for the development of shelf-stable ready-to-eat extruded snacks.

Water used for large‐scale domestic and industrial purposes generally requires treatment in various ways. When heavily charged with suspended matter, a pre‐filtration process of sedimentation is necessary. Chemical reagents are added to correct over‐hardness, softness, acidity or alkalinity and to form a flocculent precipitation on the surface of the filtering medium in order to trap over 95% of the bacteria and other matter in suspension minute enough to pass through the filtering medium. Chlorine is added as required for sterilisation purposes.

Introduction Before any metal is immersed, it is usually exposed for some time to the atmosphere. During this period the metal normally reacts with the oxygen present in the air and forms an oxide film. It may also combine with any moisture and dissolved gases in the atmosphere to produce surface films. The presence of these surface layers affects the rate, and possibly the distribution, of any subsequent corrosion. Hence the formation of surface films in the atmosphere is discussed before the corrosion of immersed lead.

The problem of eliminating corrosion and scale formation is common to both stationary and marine boilers, but is intensified in the latter by reason of the greater diversity of chemical impurities present in water in different parts of the world. A boiler compound developed in Denmark operates on principles entirely different from the stœchiometrical balance, which governs the working of purely chemical boiler compounds, and its use provides great elasticity of dosage, which can save both ships' engineers and stationary boiler plant engineers much time and trouble.

The chemical analysis of wells in the Ardabil area, Ardabil Province NW of Iran, was evaluated to determine the hydrogeochemical processes and ion concentration background in the region. The purpose of this study is to analyze the hydrochemical quality of groundwater in Ardabil aquifer in order to assess the suitability of the waters for different uses.

The chemical analysis of 75 water wells in the Ardabil area, was evaluated. Over the entire area, the dominated hydrochemical types are: Na-Cl, Na-HCO3-Cl-Mg, Ca-SO4, Ca-Mg-SO4-Cl and Ca-Mg-HCO3. The abundance of the major ions is as follows: Na⁺>Ca²⁺>Mg²⁺>K⁺ and SO₄^2–> Cl^–>HCO₃^– and major ion concentrations are below the acceptable level for drinking water. Most of groundwater samples fell in the soft water category. All of groundwaters belong to the excellent category and can be used safely for irrigation.

The chemical analysis of 75 water wells in the Ardabil area, Ardabil Province NW of Iran, was evaluated to determine the hydrogeochemical processes and ion concentration background in the region. Over the entire area, the dominated hydrochemical types are: Na-Cl, Na-HCO3-Cl-Mg, Ca-SO4, Ca-Mg-SO4-Cl and Ca-Mg-HCO3. The abundance of the major ions is as follows: Na⁺>Ca²⁺>Mg²⁺>K⁺ and SO₄^2–> Cl^–>HCO₃^– and major ion concentrations are below the acceptable level for drinking water. Most of groundwater samples fell in the soft water category. All of groundwaters belong to the excellent category and can be used safely for irrigation.

The chemical analysis of 75 water wells in the Ardabil area, Ardabil Province NW of Iran, was evaluated to determine the hydrogeochemical processes and ion concentration background in the region. Over the entire area, the dominated hydrochemical types are: Na-Cl, Na-HCO3-Cl-Mg, Ca-SO4, Ca-Mg-SO4-Cl and Ca-Mg-HCO3. The abundance of the major ions is as follows: Na⁺>Ca²⁺>Mg²⁺>K⁺ and SO₄^2–> Cl^–>HCO₃^– and major ion concentrations are below the acceptable level for drinking water. Most of groundwater samples fell in the soft water category. All of groundwaters belong to the excellent category and can be used safely for irrigation.

Corrosion and deposition problems arising from either hard or soft supply waters become of increased importance when the water is heated. In this article the nature of scale formation is discussed, also the corrosion of iron pipes and the use of sodium hexameta‐phosphate as a means for minimising the trouble so caused.