Search results

This paper aims to study the application of high-tolerance and flexible indigenous bacteria and fungi, along with the co-metabolism in recycled paper and cardboard mill (RPCM) wastewater treatment (WWT).

The molecular characterization of isolated indigenous bacteria and fungi was performed by 16S rRNA and 18S rRNA gene sequencing, respectively. Glucose was used as a cometabolic substrate to enhance the bioremediation process.

The highest removal efficiency was achieved for both chemical oxygen demand (COD) and color [78% COD and 45% color removal by Pseudomonas aeruginosa RW-2 (MZ603673), as well as approximately 70% COD and 48% color removal by Geotrichum candidum RW-4 (ON024394)]. The corresponding percentages were higher in comparison with the efficiency obtained from the oxidation ditch unit in the full-scale RPCM WWT plant.

Indigenous P. aeruginosa RW-2 and G. candidum RW-4 demonstrated effective capability in RPCM WWT despite the highly toxic and low biodegradable nature, especially with the assistance of glucose.

The purpose of this paper is to investigate the efficacy of bacterial exopolysaccharides (Eps) in reactive black 5 (RB5) textile dye wastewater bioremediation.

The Eps were produced by bacteria isolated from cotton gin trash soils collected from different cotton-growing regions in Kenya for comparison purposes. A broth medium reconstituted using molasses was assessed for its capacity to produce the Eps. RB5 textile dye wastewater was optimized for dye removal under different temperatures, times and molasses concentrations. Dye removal was studied by Lovibond-Day Light Comparator, UV–Vis spectrophotometer and FTIR.

It was found that cotton gin trash soils contained Eps-producing bacteria. Three of the Eps studied were found to have the capacity to remove at least 80% of the dye from the wastewater.

This research did not assess the efficacy of the RB5 dye removal from the wastewater by mixtures of the Eps.

Bioremediation of textile dye wastewater with Eps produced by bacteria cultured from cotton gin trash soil is significant because it will offer an effective and cleaner alternative to the chemical coagulants.

Alternative treatment of textile wastewater with the Eps would result in safer water being released into the water bodies as opposed to the chemically treated wastewater that contains remnant chemicals.

Research on the use of Eps produced by bacteria isolated from cotton gin trash soils for removal of RB5 dye from textile wastewater has not been done before.

The purpose is to conduct a systematic review of circular water management and its role in improving water availability amid increased demand and decreased supply.

A systematic literature review was implemented, which helped in the identification, selection and critical appraisal of the various research to answer the research question. It was guided by the Preferred Reporting Items for Systematic Reviews (PRISMA) statement. The review was conducted mainly on Web of Science and Scopus databases between November 20 and December 8, 2022, with search strategies involving free-text searching, phrase searching, truncation and Boolean operators.

The search process yielded 46 articles exploring circular water management. The findings reveal that circular water management offers more promise than linear or business-as-usual approaches. There are various circular water management models, although most of them emphasize a shift from the “take, make, consume and waste” principles. Contrarily, the success of the circular water management framework hinges on its ability to embrace resilience based on changing environmental conditions. Furthermore, the model focuses on improving inclusiveness with various stakeholders working together to improve water management.

The research is the first of its kind as it identifies a critical gap, the imperative need to develop a universal framework that can significantly advance the comprehension of circular water management.

The purpose of this study is to ascertain how cluster organisations have been fostering green transformation in Poland.

This paper adopts a multiple case study approach. Data collection methods involved in-depth interviews with cluster organisation managers and researchers to identify support measures for green transformation and to investigate the factors influencing their actions as well as a comprehensive analysis of documents, including cluster organisations‘ strategies.

Cluster organisations manage and participate in actions that create favourable conditions for pursuing low-carbon and circular economy ventures. They not only assist their members in overcoming obstacles related to green transformation but also engage non-members – which can lead to spillovers reaching beyond their borders. Their engagement takes place across all phases of the green transformation process.

For various reasons, the research was designed as qualitative to understand the opinions and experiences of various actors engaged in green transformation within cluster organisations’ ecosystems. The key factor influencing this decision stems from the fact that knowledge of the involvement of cluster organisations in supporting green transformation still needs to be completed and scattered. The limitations of the study include limited access to information and the fact that qualitative research allows for a certain amount of subjectivity, and the results should be generalised carefully. Moreover, the interviews were carried out with a non-random sample of participants. Another limitation of the study is related to biased views, which could have been shared by interviewees acting as representatives of the studied cluster organisations.

Cluster organisations have emerged as drivers of circular transition by promoting sustainable practices such as material recycling, biological recovery and parts harvesting. These initiatives contribute to reducing waste, conserving resources, and minimising the environmental footprint of industries. These organisations can be active agents of transformation, orchestrating collaborative efforts that have a far-reaching impact on industries and economies.

This is one of the first and most comprehensive studies on the role of cluster organisations in Poland in supporting green transformation. This paper identifies and systematises the actions undertaken to provide a clear understanding of the internal processes within cluster organisations.

The purpose of this study is to propose a new mapping tool called Circular Value Stream Mapping (C-VSM) that combines Circular Economy principles with Lean tools to enhance sustainability performance in operations.

To develop the C-VSM tool, the researchers conducted a literature review and a focus group. The tool was then applied to two real case studies in the agri-food sector, specifically analyzing an artichoke and olive oil producer, to assess its validity and effectiveness.

The study introduces the Circular Resource Box (CRB) as a key innovation in the C-VSM tool. This visual representation effectively captures resource circularity and how resources and wastes are managed, making it easy to identify circularity in the production process. By combining qualitative and quantitative information with this visual representation, companies can identify improvement opportunities aligned with the CE.

The research is limited in scope as it focuses on the application of the C-VSM tool in the agri-food sector. Further research could explore its applicability in other industries and settings to understand its broader impact.

The C-VSM tool provides practical benefits to companies seeking to transition from linear to circular production processes. It enables practitioners to identify opportunities to reduce environmental impacts and optimize production operations in line with CE.

The introduction of the C-VSM tool is a novel approach that bridges the gap between Lean Manufacturing and CE concepts, advancing the understanding of how CE thinking can be effectively implemented in operations.

This study aims to examine the relationship between the environment and tourism flows, as well as the economic variables of the 32 states of Mexico for the period 1999–2019 based on data availability. The related literature studying tourism and environmental impacts is scarce at a national level, with most of them being local case studies. Some international studies find that if the relationship exists, it is weak or nonexistent, using CO₂ as a proxy in most cases.

The present study uses panel data and cointegration panel methodologies, while also using geographic information systems to observe the distribution of variables at a state level between tourism and environmental variables.

The findings of the study are as follows: state gross domestic product, the inertia of environmental variables (i.e. volume of water treatment and solid waste), occupied rooms (proxy variable for tourism activity) and average temperature have an impact on the contemporary evolution of environmental variables; national and international tourist variables have no impact on the environment; the panels are integrated in such a way that there is a long-term equilibrium between states and some environmental care variables; and no conclusive evidence is found regarding the impact of tourism activity on the considered environmental variables.

The main limitations and areas of opportunity of the work refer to the amount of data available over time and the precision of the measurement of the variables. The availability, temporality and frequency of the data are also limitations of the research. An example of this is the nonexistence of CO₂ emissions at the state level. Additionally, studying other countries and regions for which there are limitations of data and applied studies is also a challenge.

The results are important for economies (in growth) and societies whose economic growth depends on tourism flows and have done little to reverse the damage that tourism has on the environment.

The models can contribute to study the relation between tourism and environmental variables and could be extended to regions, states and provinces for decision-making on actions to be taken for the present and future.

The originality of the research is innovative for the region: Mexico, Central and Latin America. There are no works that have studied these problems with this methodology and these variables. In terms of originality, the classic models of panel data and cointegration of panel data are useful and easily replicable for others to use for different countries. The results are relevant because there is apparently no relationship between tourism and some environmental variables in the short run, but there exists a weak and strong long-run relation between some of them.

本研究采用面板数据和协整面板模型方法, 同时利用地理信息系统(gis)观察州一级层面旅游和环境方面的变量分布。

本研究根据数据可用性, 研究了墨西哥32个州1999–2019年期间环境与旅游流量及经济变量之间的关系。在国家层面上研究旅游与环境影响的相关文献很少, 而且大多是地方的个案研究。一些国际研究发现, 即使有这种关系, 大多数案例中使用二氧化碳作为替代变量, 这种关系也是很弱或不存在。

i)国家国内生产总值, 环境变量的惯性(即水处理量和固体废物量), 占用的房间(旅游活动的代理变量)和平均温度对环境变量的现有演化有影响。ii)国内和国际旅游变量对环境没有影响。iii)面板数据以这样一种方式集成, 即国家和一些环境变量之间存在一种长期平衡。iv)关于旅游活动对所考虑的环境变量的影响没有确凿的证据。

这项工作的主要局限和机会领域是指随着时间的推移可获得的数据量和变量测量的精度。数据的可用性、时效性和频率也是本研究的局限性。这方面的一个例子是在州一级不存在二氧化碳排放。此外, 由于数据和应用研究的局限, 研究其他国家和地区也是一个挑战。

研究结果对经济增长依赖旅游业流量的经济体和社会具有重要意义, 这些经济体和社会对扭转旅游业对环境的破坏方面做得还不够。

这些模型有助于研究旅游业与环境变量之间的关系, 并可推广到地区、州和省, 以制定当前和未来的行动决策。

这项研究的原创性对该地区(墨西哥、中美洲和拉丁美洲)来说是具有创新性的。没有人用这种方法和这些变量研究过这些问题。就原创性而言, 面板数据和面板数据协整的经典模型是有用的且易于复制, 可供其他国家使用。 研究结果具有一定的相关性, 因为旅游业与部分环境变量在短期内不存在明显的相关性, 但在它们中的一些变量在长期内存在着或强或弱的相关性。

Se examina la relación entre medio ambiente y flujos turísticos, así como variables económicas de los 32 estados de México para el período 1999-2019 basado en la disponibilidad de datos. La literatura relacionada que estudia el turismo y los impactos ambientales es escasa a nivel nacional, siendo la mayoría de ellos estudios de casos locales. Estudios internacionales encuentran que, si la relación existe, es débil o inexistente, utilizando el CO2 como un indicador en la mayoría de los casos.

Se utilizaron metodologías de datos de panel y cointegración de panel, además sistemas de información geográfica para observar la distribución de variables a nivel estatal.

i) El Producto Interno Bruto Estatal, la inercia de las variables ambientales (es decir, volumen de tratamiento de agua y residuos sólidos), habitaciones ocupadas (proxy de la actividad turística) y temperatura promedio tienen un impacto en la evolución contemporánea de las variables ambientales, ii) las variables turísticas nacionales e internacionales no tienen un impacto en el medio ambiente, iii) los paneles están integrados de tal manera que existe un equilibrio a largo plazo entre turismo, crecimiento económico y algunas variables ambientales, y iv) no se encuentra evidencia concluyente con respecto al impacto de la actividad turística en las variables ambientales consideradas.

Las principales limitaciones y áreas de oportunidad del trabajo se refieren a la cantidad de datos disponibles en el tiempo y a la precisión de la medición de las variables. La disponibilidad, temporalidad y frecuencia de los datos también son limitaciones de la investigación. Un ejemplo de ello es la inexistencia de emisiones de CO2 a nivel estatal. Además, el estudio de otros países y regiones para los que existen limitaciones de datos y estudios aplicados también es un reto.

Los resultados son importantes para las economías (en crecimiento) y las sociedades cuyo crecimiento económico depende de los flujos turísticos y que han hecho poco por invertir los daños que el turismo produce en el medio ambiente.

Los modelos pueden contribuir a estudiar la relación entre el turismo y las variables medioambientales y podrían extenderse a regiones, estados y provincias para la toma de decisiones sobre las acciones a emprender para el presente y el futuro.

El artículo proporciona un análisis innovador y exploratorio hacia una perspectiva futura que agrega valor al turismo y la planificación para la sostenibilidad. La relación entre turismo y medio ambiente se ha estudiado durante varios años. La UNTWO ha abordado las consecuencias del turismo en el medio ambiente, particularmente, más basura, mayor consumo de agua, emisiones de CO2 y otros aspectos. Pocos trabajos estudian la relación entre estas variables.

La originalidad de la investigación es innovadora para la región: México, América Central y América Latina. No existen trabajos que hayan estudiado estos problemas con esta metodología y estas variables.

En términos de originalidad, los modelos clásicos de datos de panel y cointegración de datos de panel son útiles y fácilmente replicables para que otros los utilicen en diferentes países.

Los resultados son relevantes porque aparentemente no hay una relación entre el turismo y algunas variables ambientales a corto plazo, existe una relación débil y fuerte a largo plazo entre algunas de ellas.

Of critical concern to the world is the need to reduce consumption and waste of natural resources. This study provides a multi-level exploration of the ways situational and transformational links between levels and challenges are related to the adoption and utilization of material flow cost accounting in Vietnam, to encourage green productivity.

Based on triangulation of public documents at different institutional levels and a set of semi-structured interviews, situational and transformational links and challenges for material flow cost accounting in Vietnam are examined using purposive and snowball sampling of key actors.

Using a multi-level framework the research identifies six situational and transformational barriers to implementation of material flow cost accounting and suggests opportunities to overcome these. The weakest links identified involve macro-to meso-situational and micro-to macro-transformational links. The paper highlights the dominance of meso-level institutions and lack of focus on micro transformation to cut waste and enable improvements in green productivity.

The paper identifies ways for companies in Vietnam to reduce unsustainability and enable transformation towards sustainable management and waste reduction.

The paper is the first to develop and use a multi-level/multi-time period framework to examine the take-up of material flow cost accounting to encourage transformation towards green productivity. Consideration of the Vietnamese case builds understanding of the challenges for achieving United Nations Sustainable Development Goal number 12, to help enable sustainable production and consumption patterns.

Despite differing strategies towards environmental sustainability in developed and developing nations, the manufacturing sector in these regional domains faces substantial environmental issues. The purpose of this study is to examine the green-lean-six sigma (GLSS) enablers and outcomes for enhancing environmental sustainability of manufacturing firms in both, a developed and developing country context by using an environment-centric natural resource-based view (NRBV).

First, a framework of GLSS enablers and outcomes aligned with the NRBV strategic capabilities is proposed through a systematic literature review. Second, this framework is used to empirically investigate the GLSS enablers and outcomes of manufacturing firms through in-depth interviews with lean six sigma and environmental consultants from New Zealand (NZ) and Pakistan (PK) (developed and developing nations).

Analysis from both regional domains highlights the use of GLSS enablers and outcomes under different NRBV capabilities of pollution prevention, product stewardship and sustainable development. A comparison reveals that NZ firms practice GLSS to comply with environmental regulatory requirements, avoid penalties and maintain their clean-green image. Conversely, Pakistani firms execute GLSS to reduce energy use, satisfy international customers and create a green image.

This paper provides new insights on GLSS for environmental sustainability which can assist industrial experts and academia for future strategies and research.

This is one of the early comparative studies that has used the NRBV to investigate GLSS enablers and outcomes in manufacturing firms for enhancing environmental performance comparing developed and developing nations

Current evidence indicates that humans and animals are at increased risk of multiple health challenges due to microplastic (MP) profusion. However, mitigation is constrained by inadequate scientific data, further aggravated by the lack of evidence in many African countries. This review therefore synthesized evidence on the current extent of MP pollution in Africa and the analytical techniques for reporting.

A literature search was undertaken in research databases. Medical subject headings (MeSH) terms and keywords were used in the literature search. The authors found 38 studies from 10 countries that met the inclusion criteria.

Marine organisms had MPs prevalence ranging from 19% to 100%, whereas sediments and water samples had between 77 and 100%. The most common and dominant polymers included polypropylene and polyethylene.

This review shows that most studies still use methods that are prone to human errors. Therefore, the concentration of MPs is likely underestimated, even though the authors’ prevalence evaluations show MPs are still largely pervasive across multiple environmental matrices. Also, the study reveals significant spatial disparity in MP research across the African continent, showing the need for further research in other African countries.

Even though some reviews have assessed MPs pollution in Africa, they have not evaluated sample prevalence, which is necessary to understand not only concentration but pervasiveness across the continent. Secondly, this study delves deeper into various methods of sampling, extraction and analysis of MPs, as well as limitations and relevant recommendations.