Search results

In Mexico, only 19.3 per cent of industrial water is treated (Green-Peace, 2014, pp. 3-4), whereas municipal treatment levels are approximately 50 per cent (CONAGUA, 2014a). This paper aims to focus on how the wastewater treatment plant policy, from a circular economy perspective, is affected by the governance context at the Presa Guadalupe sub-basin. Circular economy can contribute to water innovations that help in improving water quality. However, such benefits are not easily achieved. This case provides an example of the complexity and challenges that the implementation of a circular economy model can face.

Data are collected via semi-structured in-depth interviews with the stakeholders that are members of the Presa Guadalupe Commission. The contextual interaction theory (CIT) is the theoretical basis for this analysis (Boer de and Bressers, 2011; Bressers, 2009).

The findings show that the wastewater treatment plant policy plays an important role in a circular economy model. Some incentives towards a circular economy model are already in place; however, the hurdles of a top-down implementation perspective, low availability of resources, prioritisation of short-term results, lack of enforcement of the “polluter pays” principle and a linear model of water systems need to be overcome. If Mexico wants to move towards a circular economy model and if the government wants to enforce sustainable development principles, wastewater treatment is a challenge that must be addressed.

There are few studies in the circular economy literature that have analysed its implementation under a governance arrangement perspective.

The textile industry is one of the largest and most important industrial sectors in India. Because the textile industry consumes large quantities of water and produces highly polluted water discharge, its environmental impact is high. Water is expensive to use, treat and dispose of. Therefore, water conservation and reuse are critical necessity for the textile industry because decreasing water and wastewater treatment and recycling costs can be beneficial.

This research neutralized the pH during dyeing industry wastewater treatment. The system should be robust to erroneous sensor measurements. A pH meter was developed and used to monitor the pH of wastewater hourly before and after HCl treatment.

HCl was used to neutralize the pH of wastewater from 9 to 7.5. The amount of HCl was optimized depending on the wastewater. Three wastewater treatment methods were used, namely, HCl, wash water and reverse osmosis (RO) treatments. The HCl treatment was the most effective for decreasing the pH; the wash water treatment was the most effective for decreasing the total dissolved solids (TDS), total suspended solids (TSS) total hardness and chemical oxygen demand; and the RO treatment was the most effective for decreasing the biochemical oxygen demand, TDS, TSS, total hardness and Cl⁻ concentration.

The pH should be monitored during the textile dyeing because the addition of color to textile fabrics is the most effective at neutral pH. This study evaluated several parameters of wastewater, including pH, color, TSS and TDS. The fabricated digital pH meter provided superior results than conventional measuring devices. The goal was to maintain a neutral pH during dyeing and recycle wastewater to improve environmental sustainability. The newly developed digital pH meter was less expensive and more precise than traditional pH meters. Before reusing and recycling, wastewater underwent ultrafiltration and RO treatment.

A sustainable selection method for facility location of the water treatment is formulated by best–worst method. In addition, the model addresses the selection of appropriate technologies in the treatment plant, management of water leakage in the whole transmission network by using modernization and selection of different transmission technologies. Finally, the interaction between water and energy in this network seems to be paying particular attention.

Rapid population growth and urban development, and the constraints of water supply have become one of the crucial challenges around the world in the 21st century. Hence, the use of refined urban wastewater is increasing in many countries as an alternative source of water. In this regard, the rehabilitation of urban wastewater recycling and reuse has been proposed as one of the most suitable solutions for urban water management. Hence, in this paper, a mathematical model is formulated to design the simultaneous marketing of the urban water distribution network and wastewater treatment (including).

It seeks to ensure that energy is supplied through chemical methods to ensure that the system's energy dependence is on the national electricity grid. And in order to validate the model, a case study has been studied. By analyzing the results, it can be concluded that the upgrading of sewage treatment plants to replace underground water and water from nearby dams in household, agricultural and industrial applications will have positive environmental and economic impacts. One of the notable environmental impacts is the decline in groundwater and water scarcity in the coming years.

The summary of contributions is presented follow as: design and planning of water and urban wastewater integrated network; sustainable selection of facility location for the water treatment; capability selecting different treatment technologies in simultaneous design water and urban sewage supply chain; managing water leak in the network; proposed a water–energy nexus model in simultaneous design water and urban sewage supply chain; studying the feasibility of construction of power plants from biogas, the resulting of anaerobic digestion in treatment centers.

In treating both sewage and storm runoff, wastewater treatment plants are important to maintaining a healthy environment. If the plant operations managers do not respond correctly to plant conditions, environmental damage resulting in the deterioration of human health may be the result. Unfortunately, there are no formal models to help these managers; they rely upon their own intuition to manage the plants. The purpose of this paper is to investigate the effectiveness of various models, originally used for manufacturing, to detect process conditions in wastewater treatment facilities. We compare and contrast the performance of five statistical models and three neural network architectures. The data used in the research is 527 daily measurements of 38 sensor readings of the process state variables of an urban wastewater treatment plant.

The purpose of this paper is to investigate the intentional formation of business networks in the wastewater industry. It enriches the theory‐building of the formation of business networks by drawing on theoretical contributions to business networks and capabilities. The paper describes, assesses and predicts scenarios relevant to the formation of business networks in the wastewater industry.

The research methodology employed is based on multiple sources of data in a multi‐method design, interpreting potential scenarios of business networks.

The findings reveal that water scarcity, population growth and economic constrains jeopardize existing business networks in the wastewater industry. Two potential scenarios: re‐inventing the centralized system through on‐site systems for mass‐markets; and expanding on‐site systems into mass‐markets seem realizable. A comparison of the two scenarios suggests that the first scenario is in a superior position to utilize the business opportunities offered.

Research limitations arise from the qualitative nature of the research undertaken.

Capability alignments and barriers suggest that the re‐inventing the centralized system through on‐site systems for mass‐markets scenario, is the most suitable for implementation. The knowledge gained allows managers to outline a specific approach for developing the capabilities required, in order to take advantage of the alignments and overcome the barriers that may exist.

The paper highlights that building theories of business networks may benefit from combining the formation of business networks with dynamic and operational capabilities.

All those effluent streams having compromised characteristics pose negative effects on the environment either directly or indirectly. Health care facilities and hospitals also generate a large amount of effluent like other industries containing harmful and toxic pharmaceutical residual compounds due to uncontrolled use of drugs, besides others. The occurrence of antibiotic in the environment is of utmost concern due to development of resistant genes. These get mixed up with ground and surface water due to lack of proper treatment of hospital wastewater. The effect of pharmaceutical compounds on human society and ecosystem as a whole is quite obvious. There are no strict laws regarding discharge of hospital effluent in many countries. Contrary to this, the authors do not have appropriate treatment facilities and solution to solve day by day increasing complexity of this problem. Moreover, water discharged from different health facilities having variable concentration often gets mixed with municipal sewage, thus remains partially untreated even after passing from conventional treatment plants. The purpose of this paper is to highlight the occurrences and fate of such harmful compounds, need of proper effluent management system as well as conventionally adopted treatment technologies nowadays all around the globe. This mini-review would introduce the subject, the need of the study, the motivation for the study, aim, objectives of the research and methodology to be adopted for such a study.

Hospital effluents consisting of pathogens, fecal coliforms, Escherichia coli, etc, including phenols, detergents, toxic elements like cyanide and heavy metals such as copper (Cu), iron (Fe), gadolinium (Gd), nickel (Ni), platinum (Pt), among others are commonly detected nowadays. These unwanted compounds along with emerging pollutants are generally not being regulated before getting discharged caused and spread of diseases. Various chemical and biological characteristics of hospital effluents are assessed keeping in the view the threat posed to ecosystem. Several research studies have been done and few are ongoing to explore the different characteristics and compositions of these effluent streams in comparison so as to suggest the suitable conventional treatment techniques and ways to manage the problem. Several antibiotic groups such as ciprofloxacin, ofloxacin, sulfa pyridine, trimethoprim, metronidazole and their metabolites are reported in higher concentration in hospital effluent. The aquatic system also receives a high concentration of pharmaceutical residues more than 14,000 μg/L from treatment plants also and other surface water or even drinking water in Indian cities. Many rivers in southern parts of India receives treated water have detected high concentration drugs and its metabolites. As far as global constraints that need to be discussed, there are only selected pharmaceuticals compounds generally analyzed, issue regarding management and detection based on method of sampling, frequency of analysis and observation, spatial as well as temporal concentration of these concerned micropollutants, accuracy in detecting these compounds, reliability of results and predictions, prioritization and the method of treatment in use for such type of wastewater stream. The complexity of management and treatment as well need to be addressed with following issues at priority: composition and characterization of effluent, compatible and efficient treatment technology that needs to be adopted and the environment risk posed by them. The problem of drugs and its residues was not seen to be reported in latter part of 20th century, but it might be reported locally in some part of globe. This paper covers some aspect about the disposal and regulatory standard around the world toward hospital effluent discharge, its managements and treatment technologies that are adopted and best suitable nowadays various industries and monitoring the efficiencies of existing treatment systems. This mini-review would introduce the subject, the need, the motivation and objectives of the study and methodology can be adopted for such a study.

The compiled review gives a complete view about the types of antibiotics used in different health care facilities, their residue formation, occurrences in different ecosystems, types of regulations or laws available in different counties related to disposal, different type of treatment technologies, innovative combined treatment schemes and future action needed to tackle such type of effluent after its generation. The thesis also highlights the use of certain innovative materials use for the treatment like nanoparticles. It also discusses about the residues impact on the human health as well as their bioaccumulative nature. If the authors relate the past to the current scenario of pharmaceutical compounds (PhACs) in the environment, the authors will certainly notice that many diseases are nowadays not curable by simple previously prescribed Ab. Many research projects have been done in European countries that have shown the risk of such residues like Pills, Sibell, Poseidon, No pills, Neptune, Knappe, Endetech, etc. In the previous section, it was mentioned that there are no stringent laws for hospital wastewater and in many countries, they are mixed with domestic wastewater. Many difficulties are there with this research due to complex analysis, detection of targeted Ab, affecting waterbodies rate of flow, nature of treatment varies with season to season. The way nature is being degraded and harmful effect are being imposed, it is important to take immediate and decisive steps in this area. Wastewater treatment plants (WWTPs) serves as a nursery for antibiotic-resistant systems, hence monitoring with great attention is also needed. Many trials with different treatment process, in combination, were considered. Many countries are paying great attention to this topic by considering the severity of the risk involved in it.

Previous studies by several scientists show that the pharmaceutical residues in the discharged effluent displayed direct toxic effects, and sometimes, detrimental effects in the mixture were also observed. The discharge of untreated effluent from hospitals and pharmaceuticals and personal care products in the natural ecosystem poses a significant threat to human beings. The pharmaceuticals, like antibiotics, in the aquatic environment, accelerate the development of the antibiotic-resistant genes in bacteria, which causes fatal health risks to animals and human beings. Others, like analgesics, are known to affect development in fishes. They also degrade the water quality and may lead to DNA damage, toxicity in lower organisms like daphnia and have the potential to bioaccumulate. A few commonly used nanoadsorbents for water and wastewater treatment along with their specific properties can also be used. The main advantages of them are high adsorption capacity and superior efficiency, their high reusability, synthesis at room temperatures, super magnetism, quantum confinement effect as well as eco-toxicity. This review will focus on the applicability of different nanoscale materials and their uses in treating wastewater polluted by organic and inorganic compounds, heavy metals, bacteria and viruses. Moreover, the use of various nanoadsorbents and nano-based filtration membranes is also examined.

A number of different pharmaceutical residues derived from various activities like production facilities, domestic use and hospitals have been reported earlier to be present in groundwater, effluents and rivers, they include antibiotics, psycho-actives, analgesics, illicit drugs, antihistamine, etc. In past few years environmental scientists are more concerned toward the effluents generated from medical care facilities, community health centers and hospitals. Various chemical and biological characteristics of hospital effluents have been assessed keeping in the view the common threats pose by them to the entire ecosystem. In this study, seven multispecialty hospitals with nonidentical pretreatment were selected for three aspects i.e. conventional wastewater characteristics, high priority pharmaceuticals and microbial analyses. The present work is to evaluate efficacy of advanced wastewater treatment methods with regard to removal of these three aspects from hospital effluents before discharge into a sewage treatment plant (STP). Based on test results, two out of seven treatment technologies, i.e. MBR and CW effectively reducing conventional parameters and pharmaceuticals from secondary and tertiary treatments except regeneration of microbes were observed in tertiary level by these two treatments.

This review has aimed to identify the emerging contaminants, including pharmaceutical residues, highly consumed chemicals that are present in the hospital effluent, along with their physicochemical and biological characteristics. In this, the main objective was to review the occurrences and fate of common drugs and antibiotics present in effluents from hospital wastewaters. As far as global constraints that need to be discussed, there are only selected pharmaceuticals compounds generally analyzed, issue regarding management and detection based on method of sampling, frequency of analysis and observation, spatial as well as temporal concentration of these concerned micropollutants, accuracy in detecting these compounds, reliability of results and predictions, prioritization and the method of treatment in use for such type of wastewater stream are among the major issues (Akter et al., 2012; Ashfaq et al., 2016; García-Mateos et al., 2015; Liu et al., 2014; Mubedi et al., 2013; Prabhasankar et al., 2016; Sun et al., 2016; Suriyanon et al., 2015; Wang et al., 2016; Wen et al., 2004). This paper covers some aspect about the disposal and regulatory standard around the world toward hospital effluent discharge, its managements and treatment technologies that are adopted and best suitable nowadays.

This study many multispecialty hospitals with nonidentical pretreatment were selected for three aspects i.e. conventional wastewater characteristics high priority pharmaceuticals and microbial analyses. The present work is to evaluate efficacy of advanced wastewater treatment methods with regard to removal of these three aspects from hospital effluents before discharge into an STP. Based on test results, two out of different treatment effectively reducing conventional parameters and pharmaceuticals from secondary and tertiary treatments except regeneration of microbes were observed in the tertiary level by these two treatments were studies followed by ozonation and ultraviolet-ray treatment.

Many countries all over the world are facing water shortages. As population increases, water is being perceived as a very valuable resource. Every effort is exerted to use water more efficiently and to make use of every drop of water to ensure the well being of future generations. New trends are developed and practiced in the area of water resources use and water saving. These trends vary from one country to another according to the degree of water scarcity, economic situations, and other factors. Developing non‐conventional water resources is an example of the recent trends in developing new water resources and water savings. Unlike rainfall, rivers, and groundwater which are considered conventional freshwater resources, the non‐conventional water resources include sea water desalination, agriculture wastewater reuse, and municipal wastewater reuse. This paper deals with the reuse of agriculture, municipal, and industrial wastewater as a new trend in developing additional water resources. Special interest is given to municipal wastewater, its characteristics and necessary treatment. Environmental and human health considerations for wastewater reuse, especially in agriculture, are also discussed. Possible consequences of wastewater reuse are introduced. Examples of wastewater reuse practices in some countries are also mentioned.

The treatment performance of two‐stage secondary treatment consisting of a trickling filter followed by activated sludge process for treatment of combined municipal and industrial wastewater is determined. The municipal wastewater treatment plant is located in Solon, Ohio, where the treatment units include grit tanks, primary clarifiers, trickling filters, aeration tanks, secondary clarifiers, tertiary filters and chlorine contact tanks. The treatment performance data for a 12‐month period in 1989 was evaluated. The average total plant flow was 2.82 MGD (millions gallons per day) which consisted of 2.19 MGD industrial wastewater and 0.63 MGD domestic wastewater. Raw wastewater was of a high strength mainly due to the contribution from industrial sources. After different degrees of treatment the values of total suspended solids (TSS) and biochemical oxygen demand (BOD) met US Environmental Protection Agency standards. This plant has good treatment performance with 99 per cent BOD and 98 per cent TSS removal efficiencies.

Micropollutants in the aquatic environment pose threats to both ecosystems and human health. Traditional wastewater treatment plants (WWTP) reduce some micropollutants, especially those who adhere to sludge or suspended matter. The hydrophilic micropollutants, on the other side, which may be non-biodegradable and resistant to UV-treatment etc. are typically transported untreated into the water recipients. This paper contains a literature study on the state of the art of advanced wastewater treatment technologies for reducing micropollutants such as pharmaceutical degradation products, personal care products, surfactants and industrial chemicals including heavy metals.

This literature study is completed using the most extensive and expansive literature database in the World to date, Google Scholar (GS). Published papers in recognized scientific journals are sought out in GS, and for relevance for this literature study, papers published here from 2016 and onwards (the last 5 years) have been chosen to eliminate irrelevant studies.

The result of the study is that there are many promising technologies on the market or emerging; however, no one solution treats every micropollutant equally well. Since advanced technologies often require expensive investments for municipalities and companies, it is important to identify which micropollutants pose the highest risk towards human health and the environment, because choosing systems to eliminate them all is not economically wise, and even choosing a system combining the existing technologies can be more expensive than states, municipalities and private companies are capable of investing in.

The research is limited to published papers on GS, which may omit certain papers published in closed databases not sharing their work on GS.

The practical implications are that practitioners cannot find go-to solutions based on the conclusions of the research and thus need to use the results to investigate their own needs further in order to make the wisest decision accordingly. However, the paper outlines the state of the art in advanced wastewater treatment and explains the benefits and downsides of the technologies mentioned; however, more research in the field is required before practitioners may find a proper solution to their specific issues.

The social implications are that the consequences of introducing a removal of micropollutants from the water environment can ultimately effect the citizens/consumers/end-users through added costs to the tariffs or taxes on advanced wastewater treatment, added costs on everyday goods, wares and products and added costs on services that uses goods, wares and products that ultimately produces micropollutants affecting the water environment.

This paper presents a much needed state of the art regarding the current advanced technologies to mitigate micropollutants in wastewater. The overview the paper provides supports politics on national as well as international levels, where larger unions such as the EU has stated that advanced wastewater treatment will be the next step in regulating pollutants for aquatic outlet.

Evaluates the effect of bioaugmentation on the activated sludge treatment of food wastewaters including those containing potato, starch, sugar and milk. Parameters of study include live liquid microorganisms, dosage, aeration time and wastewater strength. Concludes that bioaugmentation with addition of live liquid micro‐organisms improves total organic carbon (TOC) removal efficiency and reduces sludge production. Aerobic bioaugmentation is effective in TOC removal from potato, sugar and milk wastewater but not effective in the case of starch wastewater.