Search results

The purpose of this paper is to show impacts of household wastes handling on some physicochemical parameters of surface water, soil, sediments and borehole water samples in Port Harcourt. Waste generated from the households are indiscriminately dumped on roads, stream channels, bush lands and open spaces thus defacing the landscape of the city, flooding and spreading vector-borne diseases. As a result there is unsustainable and wasteful utilisation of resources which gives rise to pollution of the environment. The research determines the pollution profile of some dumpsites, surface water bodies that act as recipients of household waste from result of analysis of physicochemical parameters.

Major dumpsites in the city were selected for sampling. Three sampling stations at upstream, discharge point and downstream were selected for water and sediments. Water samples were collected in one-litre plastic containers, and then labelled and transported to laboratory for analysis. Sediment samples were collected at a depth of 5-10 m under water and preservation, handling and analysis were based on standard principles and procedures. Soil samples were dug with auger at both top (0-15 cm) and bottom (15-30 cm) in radial coordinates. The soil and sediment samples were first digested using the wet oxidation method before analysis with atomic absorption spectrophotometry.

The physicochemical analysis of surface water samples showed that conductivity, salinity, turbidity, sulphate, phosphate, magnesium, total hardness and lead exceeded the World Health Organization and Nigerian Industrial Standard limits for drinking water qualities at the sampled areas. The same parameters in addition to pH and manganese also exceeded the limits for sediment samples. The soil pH showed acidity at the sampling stations for both top and bottom depths. Conductivity, sulphate, iron, manganese, phosphate and lead also exceeded the FMEnv Guidelines and standards for soil quality. The continuous discharge of household wastes on water and soil resulted in elevated levels of some measured parameters.

The research was limited by funds. The cost of sampling and analysis was enormous and limited the study to parameters that available funds could carry. This factor also stretched the period of study. The non-availability of sponsorship made it difficult to extend the research to soil particle size distribution and the underground water movement of the study areas. Another limitation was logistics as the study covered vast areas of the metropolis demanding steady means of mobility that was not available. Epileptic supply of power delayed the timely delivery of result of analysis.

The results of the analysed physicochemical parameters of water, sediments, soil and borehole water samples indicated spatial variations in their values at the study area, with higher values at the discharge points and downstream than the upstream, while for the borehole water analysis, the effect was more pronounced at stations with appreciable quantity of degradable household wastes. The levels of some physicochemical variables exceeded standard limits as a result of continuous discharge of household wastes .The implication is that household waste handling influenced the physicochemical variables negatively and constant monitoring serves as a useful tool of abatement.

This work is original and has not been published before in any book or journal article locally or internationally. The research related waste handling lifestyles with concentrations of measurable parameters, which is an additional work to what other authors have done. The value is that data generated will be a reference material to other researchers, city planners, government agencies and institutions that are involved with environmental management. Furthermore it has added a new dimension to the discipline of waste management in terms of scope and contribution to knowledge.

Evaluates existing systems of collection and disposal of industrial waste water in the Lagos metropolis, Nigeria. Examines the rate of generation of waste water in the paints, foods and beverages, battery, textile, brewery, and pulp and paper industries. These include among others some selected industries in Ikeja Industrial Estate, Lagos. The cases chosen are believed to give a broad outline of organic strength of industrial wastes as well as disposal problems. Results show biochemical oxygen demand, pH and temperature range of 44‐6000mg/l, 4.5‐9.5 and 30‐40°C respectively. Identifies problems facing industrialists in waste water treatment and disposal. Offers suggestions for minimizing environmental pollution by industrial effluents.

A systems perspective of waste management allows an integrated approach not only to the five basic functional elements of waste management itself (generation, reduction, collection, recycling, disposal), but to the problems arising at the interfaces with the management of energy, nature conservation, environmental protection, economic factors like unemployment and productivity, etc. This monograph separately describes present practices and the problems to be solved in each of the functional areas of waste management and at the important interfaces. Strategies for more efficient control are then proposed from a systems perspective. Systematic and objective means of solving problems become possible leading to optimal management and a positive contribution to economic development, not least through resource conservation. India is the particular context within which waste generation and management are discussed. In considering waste disposal techniques, special attention is given to sewage and radioactive wastes.

The main objective of this paper is to analyze the role of municipalities in waste water services in Bahawalpur city.

The study was conducted by a variety of sources, such as regulations, status reports, position papers, as well as articles and research reports.

No technology, capital or expertise can protect the environment if local governance is not participatory and pluralistic. Local government refers to specific geographically delineated areas to deliver a range of specified services. But the role of governance is not only to provide services consistent to the residents but also to preserve the life and liberty of residents and to create and promote an environmentally sustainable development. This largely depends upon the relationship which local authorities are able to create with the local communities. These cross sectoral programs can improve the environmental performance of the municipalities in Bahawalpur, where many local problems are the result of the poor supervision and planning of municipal authorities. An articulation of legislation and participatory approach can be proclaimed at the local level if real progress is to be made towards sustainability.

Water and waste water services are highly capital‐intensive so district and city government should start projects and schemes in the urban center to govern all the wastewater systems properly. Involvement of the private sector in these services is also expected in new and more efficient ways. According to a good governance principle planning should take into account not only the economical and technical factors but also local participation, priorities and traditions etc. so the benefit and experience of different organizations can be utilized.

The paper focuses on the role of municipalities in water and waste water services in an area of Pakistan.

Environmental engineering is primarily concerned with the application of technology to the urgent tasks of cleaning up our environment. Its practitioners generally attempt to cope with the problems of streams and waterways polluted by sewage and industrial waste, oceans damaged by oil spills and sewage sludge dumpings, air polluted with noxious fumes and land abused by solid waste disposal. But that is not all that they do. The recent energy crisis has sharply brought into focus the need for alternate energy strategies, including energy extraction from solid waste. Under current estimates, the United States will produce approximately 340 million tons of solid waste by 1980. This is equivalent to one ton of solid waste per person per year. The most widely used methods of waste disposal right now are dumping, incineration and sanitary landfill. They are expensive and they cause pollution. Instead, solid waste can be burned to produce steam which can be used for heating or to generate electricity. It can also be converted to pyrolysis gas or oil, which can be stored or transported. It is from this standpoint that environmental engineering assumes considerable importance. A report which presents an overview of the state of the art in this area is the Resource Recovery from Municipal Solid Waste. Other pertinent guides include Energy from Solid Waste, Conversion of Refuse to Energy, Recycling and Reclaiming of Municipal Solid Wastes, Resource Recovery and Recycling Handbook of Industrial Wastes, and Wasteheat Management Guidebook. No project of this nature can be undertaken without government assistance. A description of the activities of the Federal Solid Waste Management Program is available from EPA's Solid Waste Recycling Projects: A National Directory.

Earthen construction does not meet today’s requirements due to certain limitations such as low water resistance and its high vulnerability to cracking damage. The purpose of this study is to improve the mechanical properties and low durability of adobe blocks by incorporating date palm wastes as a natural reinforcement and lime as a stabilizer.

Soil from the region of Biskra in Algeria was mixed with sand and lime in suitable ratios. Then, date palm wastes were added to the previous mixture at different ratios (0.3%, 0.6% and 0.9%) by dry mix weight to manufacture adobes. Cubical and cylindrical specimens were prepared and tested in a laboratory to investigate the curing time, mechanical and durability characteristics of the formulated blocks. In addition, X-ray diffraction and scanning electron microscopy (SEM) tests were used to identify the materials.

It has been observed that the addition of lime to the soil is very beneficial for its stabilization, in particular for an optimum of 12%. The presence of date palm waste in the mixture (soil + lime) generated a significant improvement in tensile strength reaching a rate of about 67%. The same observation was made for the tests of resistance to dry abrasion, resistance to erosion, attack by external sulphate and wetting/drying. However, for cases of compressive strength, water absorption and swelling an unfavorable effect was recorded.

Based on the above-mentioned findings, this paper presents a novel solution to increase the durability of adobe materials using date palm wastes with oven curing at 65°C for about nine days. Adopting such an approach would certainly encourage building durable mud housing on a large scale. This can contribute to solving the acute housing shortage, particularly in poor countries.

The paper aims to discuss how life cycle assessment can be used in the early stage planning phase of new settlements.

By applying the life cycle methodology on the waste, water and wastewater system of a new carbon‐neutral settlement under planning in Norway, the authors discuss the pros and cons with applying this methodology in an early planning phase.

The LCA methodology enabled the authors to compare suggestions from interdisciplinary planning teams, relate them to the existing systems in Trondheim and provide quantitative results back to the decision‐makers, in this case the municipality. The environmental benefits of implementing alternative solutions in the waste, water and wastewater systems were found to be small.

Data availability and uncertainty can be limitations in the early planning phase.

By applying this methodology, the life cycle environmental impact of different solutions can be assessed at an early planning stage.

Even if life cycle assessment has been used for years in the research community, there is too little experience with applying the methodology in the early planning phase of new projects. This paper discuss how life cycle assessment can be used to compare suggestions from interdisciplinary planning teams, relate them to existing systems and provide quantitative results back to the decision‐makers.

The chapter investigates the relationship between environmental management practices (EMPs) and financial performance (FP).

The study is based on a sample of 187 SMEs and uses data on six EMPs (energy, water, waste, material, emissions, and biodiversity) collected through a self-administered questionnaire from owner-managers of SMEs. Ordinary least squares regression is employed to model the hypothesized paths.

The results suggest a positive and significant relationship between EMPs (energy, water, and material) and FP. There is also a significant positive relationship between an aggregate EMP measure and FP. However, other EMPs (waste, emissions, and biodiversity) are not significantly associated with FP. Overall, these results provide empirical support to the mostly normative suggestion that the conflicting results on the environmental management and financial performance relationship are partly due to the EMP measure used.

The study is based on cross-sectional data, and therefore, it is impossible to determine any changes over time. Longitudinal studies could help confirm the relationship between EMP and FP over a longer period. From a policy perspective, this results mean that the Ghanaian EPA must monitor more closely for violations of laws and regulations relating to waste, emissions, and biodiversity since SMEs do not have incentives to manage these impacts without commensurate return.

The study contributes by documenting evidence of the relationship between multiple measures of EMP and FP. This unlike most existing studies has enabled us to report evidence of how each EMP measure affects FP differently and where win–win opportunities are for SMEs. Thus, the win–win opportunities are associated with some EMP measures but not all.

Presents a survey of water, water pollution and control in China. Water shortage and water pollution are two of the most important environmental problems and factors affecting the development of industry, agriculture and the economy. China has made great efforts to improve environmental quality and has issued a series of important policies and regulations since the 1970s. Water saving and waste water reuse are the most significant measures implemented for solving the water shortage and controlling water pollution. All these policies and measures are playing an important role in alleviating and controlling the extent of water pollution.

The purpose of this paper is to explore people’s perceptions, stated attitudes, and observed and reported behaviour to water and other environmental quality.

The study adopted a mixed method approach. It employed a cross-sectional survey design. Ten communities were selected in Accra and its surrounding communities to indicate various levels of infrastructure provision and environmental quality. Four separate focus group discussions (FGDs) were carried out in each community, with a mixed group of older and young adult men and women, a group of men only, a group of women only, and a group of young adults only. Following the FGDs, further information was obtained through structured household questionnaire survey involving 443 respondents.

Different ideas were employed to explain people’s perceptions of water quality. There were common ideas such as on health, history of water use, perceptions which affect water use, and management of community activities which affect water sources. These ideas which emerged from the focus groups helped participants to assign meaning to their environment. Reported behaviour was influenced by the ability to pay for services, their availability and the influence of shared community norms. Although citizen participation in water and environmental management decision making was very limited, community collective action can be harnessed to enhance water and other environmental management.

Adopted an interdisciplinary approach that enabled explanations to phenomenon to emerge from the perspectives of the society rather than views being suggested to them. Thus, resulting in evidence-based issues for intervention.