Search results

Walking on inclined ground is an important ability for humanoid robots. In general, conventional strategies for walking on slopes lack technical analysis in, first, the waist posture with respect to actual robot and, second, the landing impact, which weakens the walking stability. The purpose of this paper is to propose a generic method for walking pattern generation considering these issues with the aim of enabling humanoid robot to walk dynamically on a slope.

First, a virtual ground method (VGM) is proposed to give a continuous and intuitive zero-moment point (ZMP) on slopes. Then, the dynamic motion equations are derived based on 2D and 3D models, respectively, by using VGM. Furthermore, the waist posture with respect to the actual robot is analyzed. Finally, a reformative linear inverted pendulum (LIP) named the asymmetric linear inverted pendulum (ALIP) is proposed to achieve stable and dynamical walking in any direction on a slope with lower landing impact.

Simulations and experiments are carried out using the DRC-XT humanoid robot platform with the aim of verifying the validity and feasibility of these new methods. ALIP with consideration of waist posture is practical in extending the ability of walking on slopes for humanoid robots.

A generic method called ALIP for humanoid robots walking on slopes is proposed. ALIP is based on LIP and several changes, including model analysis, motion equations and ZMP functions, are discussed.

This paper aims to deal with the human activity recognition using human gait pattern. The paper has considered the experiment results of seven different activities: normal walk, jogging, walking on toe, walking on heel, upstairs, downstairs and sit-ups.

In this current research, the data is collected for different activities using tri-axial inertial measurement unit (IMU) sensor enabled with three-axis accelerometer to capture the spatial data, three-axis gyroscopes to capture the orientation around axis and 3° magnetometer. It was wirelessly connected to the receiver. The IMU sensor is placed at the centre of mass position of each subject. The data is collected for 30 subjects including 11 females and 19 males of different age groups between 10 and 45 years. The captured data is pre-processed using different filters and cubic spline techniques. After processing, the data are labelled into seven activities. For data acquisition, a Python-based GUI has been designed to analyse and display the processed data. The data is further classified using four different deep learning model: deep neural network, bidirectional-long short-term memory (BLSTM), convolution neural network (CNN) and CNN-LSTM. The model classification accuracy of different classifiers is reported to be 58%, 84%, 86% and 90%.

The activities recognition using gait was obtained in an open environment. All data is collected using an IMU sensor enabled with gyroscope, accelerometer and magnetometer in both offline and real-time activity recognition using gait. Both sensors showed their usefulness in empirical capability to capture a precised data during all seven activities. The inverse kinematics algorithm is solved to calculate the joint angle from spatial data for all six joints hip, knee, ankle of left and right leg.

This work helps to recognize the walking activity using gait pattern analysis. Further, it helps to understand the different joint angle patterns during different activities. A system is designed for real-time analysis of human walking activity using gait. A standalone real-time system has been designed and realized for analysis of these seven different activities.

The data is collected through IMU sensors for seven activities with equal timestamp without noise and data loss using wirelessly. The setup is useful for the data collection in an open environment outside the laboratory environment for activity recognition. The paper also presents the analysis of all seven different activity trajectories patterns.

The purpose of this paper was to present a soft landing control strategy for a biped robot to avoid and absorb the impulsive reaction forces (which weakens walking stability) caused by the landing impact between the swing foot and the ground.

First, a suitable trajectory of the swing foot is preplanned to avoid the impulsive reaction forces in the walking direction. Second, the impulsive reaction forces of the landing impact are suppressed by the on-line trajectory modification based on the extended time-domain passivity control with admittance causality that has the reaction forces as inputs and the decomposed swing foot’s positions to trim off the forces as the outputs.

The experiment data and results are described and analyzed, showing that the proposed soft landing control strategy can suppress the impulsive forces and improve walking stability.

The main contribution is that a soft landing control strategy for a biped robot was proposed to deal with the impulsive reaction forces generated by the landing impact, which enhances walking stability.

The purpose of this paper is to design a novel optimized biped robot gait generator which plays an important role in helping the robot to move forward stably. Based on a mathematical point of view, the gait design problem is investigated as a constrained optimum problem. Then the task to be solved is closely related to the evolutionary calculation technique.

Based on this fact, this paper proposes a new way to optimize the biped gait design for humanoid robots that allows stable stepping with preset foot-lifting magnitude. The newly proposed central force optimization (CFO) algorithm is used to optimize the biped gait parameters to help a nonlinear uncertain humanoid robot walk robustly and steadily. The efficiency of the proposed method is compared with the genetic algorithm, particle swarm optimization and improved differential evolution algorithm (modified differential evolution).

The simulated and experimental results carried out on the small-sized nonlinear uncertain humanoid robot clearly demonstrate that the novel algorithm offers an efficient and stable gait for humanoid robots with respect to accurate preset foot-lifting magnitude.

This paper proposes a new algorithm based on four key gait parameters that enable dynamic equilibrium in stable walking for nonlinear uncertain humanoid robots of which gait parameters are initiatively optimized with CFO algorithm.

The purpose of this study is to present an optimization-based gait planning method for biped robots according to the conditions of terrain, which takes fully the relationship between walking stability margin and energy efficiency into account.

First, the authors newly designed a practical gait motion synthesis algorithm by using the optimal allowable zero moment point (ZMP) variation region (OAZR), which can generate different gait motions corresponding to different terrains based on the modifiability of ZMP in lateral (y-axis) direction. Second, an effective gait parameter optimization algorithm is performed to find the optimal set of key gait parameters (step length, duration time of gait cycle, average height of center of mass (CoM), amplitude of the vertical CoM motion and double support ratio), which maximizes either the walking stability margin or the energy efficiency with certain walking stability margin under practical constraints (mechanical constraints of all joint motors, geometric constraints, friction force limit and yawing moment limit) according to the conditions of terrain. Third, the necessary controllers for biped robots have been introduced briefly.

The experiment data and results are described and analyzed, showing that the proposed method was verified through simulations and implemented on a DRC-XT biped robot.

The main contribution is that the OAZR has been defined based on AZR, which could be used to plan and generate the various feasible gait motions to help a biped robot to adapt effectively to various terrains.

Humanoid robots have complicated dynamics, and they lack dynamic stability. Despite having similarities in kinematic structure, developing a humanoid robot with robust walking is quite difficult. In this paper, an attempt to produce a robust and expected walking gait is made by using an ALO (ant lion optimization) tuned linear inverted pendulum model plus flywheel (LIPM plus flywheel).

The LIPM plus flywheel provides the stabilized dynamic walking, which is further optimized by ALO during interaction with obstacles. It gives an ultimate turning angle, which makes the robot come closer to the obstacle and provide a turning angle that optimizes the travel length. This enhancement releases the constraint on the height of the COM (center of mass) and provides a larger stride. The framework of a sequential locomotion planer has been discussed to get the expected gait. The proposed method has been successfully tested on a simulated model and validated on the real NAO humanoid robot.

The convergence curve defends the selection of the proposed controller, and the deviation under 5% between simulation and experimental results in regards to travel length and travel time proves its robustness and efficacy. The trajectory of various joints obtained using the proposed controller is compared with the joint trajectory obtained using the default controller. The comparison shows the stable walking behavior generated by the proposed controller.

Humanoid robots are preferred over mobile robots because they can easily imitate the behaviors of humans and can result in higher output with higher efficiency for repetitive tasks. A controller has been developed using tuning the parameters of LIPM plus flywheel by the ALO approach and implementing it in a humanoid robot. Simulations and experiments have been performed, and joint angles for various joints are calculated and compared with the default controller. The tuned controller can be implemented in various other humanoid robots

Humanoid robots should have the ability of walking in complex environment and overcoming large obstacles in rescue mission. Previous research mainly discusses the problem of humanoid robots stepping over or on/off one obstacle statically or dynamically. As an extreme case, this paper aims to demonstrate how the robots can step over two large obstacles continuously.

The robot model uses linear inverted pendulum (LIP) model. The motion planning procedure includes feasibility analysis with constraints, footprints planning, legs trajectory planning with collision-free constraint, foot trajectory adapter and upper body motion planning.

The motion planning with the motion constraints is a key problem, which can be considered as global optimization issue with collision-free constraint, kinematic limits and balance constraint. With the given obstacles, the robot first needs to determine whether it can achieve stepping over, if feasible, and then the robot gets the motion trajectory for the legs, waist and upper body using consecutive obstacles stepping over planning algorithm which is presented in this paper.

The consecutive stepping over problem is proposed in this paper. First, the paper defines two consecutive stepping over conditions, sparse stepping over (SSO) and tight stepping over (TSO). Then, a novel feasibility analysis method with condition (SSO/TSO) decision criterion is proposed for consecutive obstacles stepping over. The feasibility analysis method’s output is walking parameters with obstacles’ information. Furthermore, a modified legs trajectory planning method with center of mass trajectory compensation using upper body motion is proposed. Finally, simulations and experiments for SSO and TSO are carried out by using the XT-I humanoid robot platform with the aim to verify the validity and feasibility of the novel methods proposed in this paper.

Generally, humanoid robots usually suffer significant impact force when walking or running in a non-predefined environment that could easily damage the actuators due to high stiffness. In recent years, the utilization of passive compliant series elastic actuators (SEA) for driving humanoid's joints has proved the capability in many aspects so far. However, despite being widely applied in the biped robot research field, the stable control problem for a humanoid powered by the SEAs, especially in the walking process, is still a challenge. This paper proposes a model reference adaptive control (MRAC) combined with the back-stepping algorithm to deal with the parameter uncertainties in a humanoid's lower limb driven by the SEA system. This is an extension of our previous research (Lanh et al., 2021).

Firstly, a dynamic model of SEA is obtained. Secondly, since there are unknown and uncertain parameters in the SEA model, a Model Reference Adaptive Controller (MRAC) is employed to guarantee the robust performance of the humanoid's lower limb. Finally, an experiment is carried out to evaluate the effectiveness of the proposed controller and the SEA mechanism.

This paper proposes an effective control algorithm that can be widely applied for the humanoid-SEA system. Besides, the effect of the coefficients in the control law is analyzed to further improve the response's quality.

Even though the simulation shows good results with stable system response, the practical experiment has not been implemented to fully evaluate the quality of the controller.

The MRAC is applied to control the humanoid's lower limb and the back-stepping process is utilized to combine with an external SEA system but still maintain stabilization. The simplified model of the lower-limb system proposed in the paper is proven to be appropriate and can be taken for further research in the future.

This paper aims to propose a pulsing type joint servo driver-based obstacle surmounting method for a humanoid robot according to the whole-body dynamics model, which fully takes into account the relationship between the whole-body stability margin and instantaneous torque.

First, the authors designed a new practical instantaneous large torque strategy for a pulsing type joint servo driver by modeling the whole-body dynamics of the humanoid robot. The work also considered joint angle planning based on the dynamic model for crossing obstacles. Second, in the simulation and experimentation, the instantaneous torque of the driver is used to realize successful crossing of obstacles by the humanoid robot. This verifies the correctness of the whole-body dynamics model and the feasibility of the method for crossing obstacles.

The experimental data and results are described and analyzed, showing that the proposed method is feasible and effective through simulation and implementation.

The main contribution is the humanoid robot’s actuation control technology and humanoid action realization, which could be used for squatting and moving heavy objects to help a humanoid robot adapt effectively.

The purpose of this paper is to describe a compact wheelchair, which has two 3-degrees of freedom (DOF) legs and a 1-DOF base (the total DOF of the leg system is 7) for stair-climbing, and wheels for flat surface driving.

The proposed wheelchair climbs stairs using the two 3-DOF legs with boomerang-shaped feet. The leg mechanisms are folded into the compact wheelchair body when the wheelchair moves over flat surfaces. The authors also propose a simple estimation method of stair shape using laser distance sensors, and a dual motor driving system to increase joint power.

The proposed wheelchair can climb arbitrary height and width stairs by itself, even when they are slightly curved. During climbing, the trajectory of the seat position is linear to guarantee the comfort of rider, and the wheelchair always keeps a stable condition to ensure the stability in an emergency stop.

The wheelchair mechanism with foldable legs and driving wheels enables smooth stair climbing, efficient flat surface driving and additional useful motions such as standing and tilting.