Search results

The purpose of this paper is to study Al-based green composite. To make composite samples of aluminium alloy (AA3105) with different weight percentages of rice husk ash (RHA) and eggshell (ES) particles as reinforcement, stir casting method was used.

Several other aspects, including the weight percent of reinforcing agent particles, the applied stress and the sliding speed, were taken into consideration. During the course of the wear test, the sliding distance that was recorded varied from a minimum of 1,000 m all the way up to a maximum of 3,135 m (10, 15, 20, 25 and 30 min). The typical range for normal loads is 8–24 N, and their speed is 1.58 m/s.

With the AA/ES/RHA composite, the wear rates decreases when the grain size of the reinforcing particles enhanced. Scanning electron microscopy images of worn surfaces show that at low speeds, delaminating and ploughing are the main causes of wear. At high speeds, ploughing is major cause of wear. Composites with better wear-resistant properties can be used in wide range of tribological applications, especially in the automotive industry. It was found that hardness increases at the same time as the weight of the reinforcement increases. Tensile and hardness were maximized at 10% reinforcement mix in Al3105.

In this work, ES and RHA has been used to develop green metal matrix composite to support green revolution as promoted/suggested by United Nations thus reducing the environmental pollution.

This paper aims to analyse how financial literacy (FL) is conceptualised and operationalised in the Indian context.

A systematic literature review (SLR) was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) protocol. Thirty-six articles published between 2010 and 2020 were considered for analysis. The FL conceptualisation was examined based on knowledge, ability, skill, attitude and confidence elements. The FL operationalisation was analysed using the modified version of the Organisation for Economic Co-operation and Development’s (OECD) Programme for International Student Assessment (PISA) 2012 model for organising the domain for an assessment framework.

The findings indicate that, despite offering operationalisation details of the FL, 13 out of 36 studies did not include a conceptual definition of FL. Of the 23 studies that mentioned a conceptual definition, 87% are primarily focused on the “knowledge” element and only 39% have combined knowledge, ability/skill and attitude elements in defining FL. As in the developed countries, the Indian studies also preferred investment/saving-related contents in their FL measures. The volume of content focusing on the financial landscape is meagre amongst the FL measures used in India and developed countries. The survey instruments of most studies have been designed in the individuals’ context but have failed to measure the extent to which individuals apply the knowledge in performing their day-to-day financial transactions. Further, it was found that 20 out of 36 studies did not convert the FL level of their target groups into a single indicator or operational value.

To the best of our knowledge, this is the first study that explores the FL’s assessment practices in India. Further, this study offers new insights by comparing the contents of FL measures used in Indian studies with those used in developed countries.

Virtual tourism has risen, especially after the global pandemic Covid-19. In the days of lockdown, virtual tours got one of the highest views online, and people satisfied their craving for travelling by experiencing virtual tourism. As destinations reopen themselves, domestic tourism is on the rise in India. Social media channels like YouTube have become the most watchable platforms to experience new ways of travelling among Indians and getting motivated by videos or reels. Virtual tours have given a further boost to the rebuilding of the brand image of these destinations. The study follows the example of a social media YouTube influencer who, through their web content and videos, promotes Indian destinations uniquely and interestingly. The study proposes various triggers that make people travel after watching influencers' videos and getting inspired to explore India from new perspectives and travel smartly. The study would reflect and showcase how effective the influencers are in bringing practical tourism to their proposed destinations by analysing their channel traffic and people engagement tools and how destinations could benefit from them by understanding the attributes that attract global audiences. The study will likely increase awareness of the importance of virtual tourism influencers in brilliant destination branding and smart travelling.

In the research of stock market efficiency, it is argued that the stock market moves randomly and absorbs all the available information. As a result, it is quite impossible to make predictions about the possible future movement by the investors. But literatures have detected certain calendar anomalies where a day(s) in a week or month(s) in a year or a particular event in a year becomes conducive for investors to earn more than the normal. Hence, the purpose of this study is to find out the month of the year effect in the Indian stock market.

In this study, daily time series data of Sensex and Nifty from 1996 to 2021 is used. The study uses month dummies to capture the effect. Different variants of generalised autoregressive conditional heteroskedasticity (GARCH) models, both symmetric and asymmetric, are used in the study to model the conditional volatility in the presence month effect.

This study found the September effect in the return series of both the stock market. Apart from that, asymmetric GARCH models are found to be the best fit model to estimate conditional volatility.

This study is an endeavour to study month of the year effect in the Indian context. This research will provide valuable insight for studying the different calendar anomalies.

The purpose of this study is to investigate the entropy generation in different nanofluids flow over a vertically moving rotating disk. Unlike the classical Karman flow, water-based nanofluids have various suspended nanoparticles, namely, Cu, Ag, Al₂O₃ and TiO₂, and the disk is also moving vertically with time-dependent velocity.

The Keller box technique numerically solves the governing equations after reduction by suitable similarity transformations. The shear stress and heat transport features, along with flow and temperature fields, are numerically computed for different concentrations of the nanoparticles.

This study is done comparatively in between different nanofluids and for the cases of vertical movement of the disk. It is found that heat transfer characteristics rely not only on considered nanofluid but also on disk movement. Moreover, the upward movement of the disk diminishes the heat-transfer characteristics of the fluid for considered nanoparticles. In addition, for the same group of nanoparticles, an entropy generation study is also performed, and an increasing trend is found for all nanoparticles, with alumina nanoparticles dominating the others.

This research is a novel work on a vertically moving rotating surface for the water-conveying nanoparticle fluid flow with entropy generation analysis. The results were found to be in good agreement in the case of pure fluid.

This study aims to investigate the optimal process parameters of the wire-cut electrical discharge machining (WCEDM) for the machining of the GZR-AA7475 hybrid metal matrix composite (HMMC). HMMCs are prepared with 2 Wt.% graphite and 4 Wt.% zirconium dioxide reinforced with aluminium alloy 7475 (GZR-AA7475) composite by using the stir casting method. The objective is to enhance the mechanical properties of the material while preserving its unique features. WCEDM with a 0.18 mm molybdenum wire electrode is used for machining the composite.

To conduct experimental studies, a Taguchi L27 orthogonal array was adopted. Input variables such as peak current (I_p), pulse-on-time (T_ON) and flushing pressure (P_F) were used. The effect of process parameters on the output responses, such as material removal rate (MRR), surface roughness rate (SRR) and wire wear ratio (WWR), were investigated. The grey relational analysis (GRA) is used to obtain the optimal combination of the process parameters. Analysis of variance (ANOVA) was also used to identify the significant process parameters affecting the output responses.

Results from the current study concluded that the optimal condition for grey relational grade is obtained at T_ON = 105 µs, I_p = 100 A and P_F = 90 kg/cm². Peak current is the most prominent parameter influencing the MRR, whereas SRR and WRR are highly influenced by flushing pressure.

Identifying the optimal process parameters in WCEDM for machining of GZR-AA7475 HMMC. ANOVA and GRA are used to obtain the optimal combination of the process parameters.

This paper aims to examine the evolution of organizational identification (OI) research over the past five decades and its journey through various lenses, such as the collaborative network of authors, organizations and countries. The conceptual and intellectual structure of the construct is analysed via keywords and co-citation pattern mapping.

OI research is rising in popularity, with 118 papers published in 2019, 168 papers in 2020 and 15 publications till February 2021 in the Scopus database. The Scopus database is used to retrieve 55 years of OI studies published between 1965 and 2021. The free bibliometric tools Biblioshiny and VOSviewer are used to analyse 1,034 journal papers.

The result showed that R. Van Dick is the most influential author and the USA is the most involved country in OI research. As per the findings, the Journal of Organizational Behaviour published most of OI research and “corporate social responsibility” and “organizational commitment” seem to be the most used keywords alongside OI.

This study will be highly beneficial to OI researchers making their understanding about the construct better. It will also encourage social psychologists to understand the construct utility in workplace social welfare programmes. The research could also help governments and funding bodies to evaluate grant requests. Furthermore, researchers from countries with the lowest proportion of OI studies would be encouraged to spend more time and effort in this area. It will offer insight into international marketing and how individuals and stakeholders perceive and connect with an organization globally.

To the best of the authors’ knowledge, this study is one of the important research studies carried out in the domain of OI in the international context. This is also one of the few studies which is spread out across different disciplinary areas including international marketing and management. The success of this paper can open avenues and influence future researchers to study in the OI and related cross-disciplinary areas of international management.