Search results

This study aims to examine the role of deviant status (lower vs higher rank) and organizational structure (vertical vs horizontal) on individuals’ responses to workplace deviance.

Two studies (N = 472) were designed to examine the role of deviant status and organizational structure in responses to workplace deviance. Study 1 (N = 272) manipulated deviant status and organizational structure. Study 2 (N = 200) also manipulated deviant status but focused on participants’ subjective evaluations of the organizational structure of their workplace.

Study 1 found that participants reported lower job satisfaction and organizational commitment, and higher turnover intentions when they imagined being confronted with deviant behaviors displayed by a manager (vs by a subordinate), regardless of the type of organizational structure. Study 2 extended this finding by showing that the indirect effect of organizational structure (vertical vs horizontal) on turnover intention via job satisfaction and organizational commitment was moderated by deviant status: when the deviant’s status was higher, working in a vertical (vs horizontal) organization was associated with decreased job satisfaction and commitment, which, in turn, was associated with a higher level of turnover intentions.

The findings broaden our understanding of how individuals respond to deviance at the workplace, by simultaneously considering the effects of organizational structure (vertical vs horizontal) and deviant status (upward vs downward directions of deviance).

The purpose of this paper is to study the dynamic characteristics and seismic performance of the composite open-web grid floor structure.

Studied by using mode-superposition response spectrum method and time history analysis method.

The results show that the vertical mode-superposition response spectrum method is close to the time history analysis method. The floor has strong seismic performance, and the deflection and internal force are not large under vertical seism. The vertical seismic action suggested that 10% of the representative value of gravity load should be used to ensure the safety of the structure.

In the design, the mid-span section should be properly strengthened or the variable section design should be adopted.

This paper considers carbon abatement in a competitive supply chain that is composed of a manufacturer and two retailers under vertical shareholding. The authors emphasize the equilibrium decision problem of stakeholders under vertical shareholding and different power structures.

A game-theoretic approach was used to probe the influence of power structure and retailer competition on manufacturers' carbon abatement under vertical shareholding. The carbon abatement decisions, environmental imp4cacts (EIs) and social welfare (SW) of different scenarios under vertical shareholding are obtained.

The findings show that manufacturers are preferable to carbon abatement and capture optimal profits when shareholding is above a threshold under the retailer power equilibrium, but they may exert a worse negative impact on the environment. The dominant position of the held retailer is not always favorable to capturing the optimal SW and mitigating EIs. In addition, under the combined effect of competition level and shareholding, retailer power equilibrium scenarios are more favorable to improving SW and reducing EIs.

This paper inspects the combined influence of retailer competition and power structure on manufacturers' carbon abatement. Distinguishing from previous literature, the authors also consider the impact of vertical shareholding and consumer preferences. In addition, the authors analyze the SW and EIs in different scenarios.

We examine the evolution of vertical specialization in three industries: chemicals, computers, and semiconductors. Vertical specialization is the restructuring of industry-wide value chains, such that different stages are controlled by different firms, rather than being vertically integrated within the boundaries of individual firms. In some cases, vertical specialization may span international boundaries and is associated with complex international production networks. After decades of vertical specialization, firms in the chemical industry are re-integrating stages of the value chain. By contrast, the semiconductor and computer industries have experienced significant vertical specialization during the past ten years. We examine how and why these contrasting trends in vertical specialization have co-evolved with industry maturation and decline, and underscore the importance and role of both industry factors and business strategies necessary for industries to become more specialized. We also consider the effects of vertical specialization on the sources of innovation and the geographic redistribution of production and other activities. We conclude that the evolution of vertical specialization in these three industries has both reflected and influenced the strategies of leading firms, while also displays industry-specific characteristics that are rooted in different technological and market characteristics.

Complex technology not only provides potential economic benefits but also increases the difficulty of application. Whether and how upstream technological complexity affects downstream manufacturers' innovation through vertical separation structure is worth discussing, but it has not been effectively discussed.

Through theoretical analysis and empirical testing, this article discusses the cost effect and market competition effect caused by upstream technological complexity on downstream manufacturers and further elucidates the impact of upstream technological complexity on downstream manufacturers' innovation.

Research has found that the impact of upstream technological complexity on the downstream manufacturers' innovation depends on the cost effect and market competition effect. The cost effect caused by the complexity of upstream technology inhibits the innovation of downstream manufacturers. In contrast, the market competition effect promotes the innovation of downstream manufacturers. There are differences in the cost effect and market competition effect of upstream technological complexity on different types of downstream manufacturers, so there is also significant heterogeneity in the impact of upstream technological complexity on innovation of different types of downstream manufacturers.

The conclusions of this article improve the understanding of the relationship between upstream technological complexity and downstream innovation and provide helpful implications for industrial chain innovation.

This paper aims to examine the static compression characteristics of cell topologies in body-centered cubic with vertical struts (BCCZ) and face-centered cubic with vertical struts (FCCZ) along with novel BCCZZ and FCCZZ lattice structures.

The newly developed structures were obtained by adding extra interior vertical struts into the BCCZ and FCCZ configurations. The samples, composed of the AlSi10Mg alloy, were fabricated using the selective laser melting (SLM) additive manufacturing technique. The specific compressive strength and failure behavior of the manufactured lattice structures were investigated, and comparative analysis among them was done.

The results revealed that the specific strength of BCCZZ and FCCZZ samples with 0.5 mm strut diameter exhibited approximately a 23% and 18% increase, respectively, compared with the BCCZ and FCCZ samples with identical strut diameters. Moreover, finite element analysis was carried out to simulate the compressive response of the lattice structures, which could be used to predict their strength and collapse mode. The findings showed that while the local buckling of lattice cells is the major failure mode, the samples subsequently collapsed along a diagonal shear band.

An original and systematic investigation was conducted to explore the compression properties of newly fabricated lattice structures using SLM. The results revealed that the novel FCCZZ and BCCZZ structures were found to possess significant potential for load-bearing applications.

The main supporting frame of steel structure buildings is steel, and the beam-column joints of the steel structure directly affect the stability and strength of the supporting frame.

This paper briefly introduced the beam-column joints which are used for ensuring the stability of buildings in the steel structure building, selected the fabricated beam-column joints which were different from the traditional welding methods, tested the fabricated beam-column joints with the reaction frame and jack and detected the influence of the thickness and length of the splice plate on the mechanical properties of joints.

The results showed that the joint stress and the displacement in the vertical direction increased under greater load no matter which kind of fabricated joint was used; under the same load, the thickness and length of the splice significantly affected the mechanical properties of joints, and the larger the thickness and length, the smaller the joint stress and displacement in the vertical direction.

To sum up, increasing the thickness or length of the splice plate of the fabricated joint can effectively improve the mechanical properties of joints.

This chapter investigates the structure of a simple vertical competition model by exhibiting the competitive links among assemblers, component producers, and integrated firms in a generalization of Cournot's model of the vertical integration by allowing any degree of competition among cohorts. Vertical integration in the model can take place by vertical mergers, forward or backward integration. Vertical integration is highly profitable and always reduces the price of the final product. The cost-raising strategy of an integrated firm buying out unneeded component producers is profitable and detrimental to consumers only if the firm faces no competition from other integrated firms.

The purpose of this paper is to examine how various transaction-cost characteristics influence the choice of vertical coordination (VC) structures (e.g. different contract types) and horizontal coordination (HC) structures (e.g. different farmer organization types) to link smallholder farmers efficiently with buyers. It analyzes the relationship between vertical and horizontal structures, and the economic sustainability of different structure combinations.

The paper develops a conceptual framework to predict coordination structures as a function of transaction-cost characteristics, compares predictions for the Malian cereals market to empirical evidence using 15 case studies, and then analyzes structure combinations.

Asymmetric scale between farmers and buyers; uncertainty in production, prices, policy, and contract enforcement; and quality and quantity debasement lead to selections of structures with high levels of control. Vertical and horizontal structures demonstrate a complementary relationship in certain core coordination roles, while exhibiting substitutability in the provision of other coordination activities. The marketing cooperative and marketing contract pairing is the most prevalent combination.

The conceptual framework is useful for explaining the selection of coordination structures, and can be applied in other contexts to strengthen external validity.

The framework facilitates predictions and explanation of both VC and HC structures, with empirical application on a country and value chains receiving little attention in the literature.

Growing awareness of the importance of preserving the built environment has created an increasing demand for experts capable of performing building inspections to ensure a high level of preservation. Technical surveys include a set of procedures and tests that have become essential tools providing the necessary knowledge required for maintenance, preservation and improvement of buildings. The paper aims to discuss these issues.

Within this set of inspection techniques, this paper presents a method developed to produce vertical deformation plans from the levelling data obtained from different floors of a building. It also explains how to perform accurate levelling and an outcome analysis to provide displacement maps. Thus, based upon obtained measurements, it is possible to achieve 2D contour maps and three-dimensional (3D) surface mapping by means of specialized software that is typically used for cartographic and territorial analysis.

The developed methodology provides easier analysis of the deformation of buildings and structures. Consequently, the method produces relatively accurate outcomes that are sufficient to make a proper assessment that facilitates the diagnostic and decision-making process. The case studies analysed show the applicability and usefulness of the procedure.

This sustainable and non-destructive system is an essential instrument for providing valuable and useful information to the specialist. The 2D/3D graphical data displays enable easier analysis of survey results, also aiding comprehension of these results in the context of liability claims.