Search results

In this paper, improvements in reducing transmitted accelerations in a full vehicle are obtained by optimizing the gain parameters of an active control in a roughness road profile.

For a classically designed linear quadratic regulator (LQR) control, the vibration attenuation performance will depend on weighting matrices Q and R. A methodology is proposed in this work to determine the optimal elements of these matrices by using a genetic algorithm method to get enhanced controller performance. The active control is implemented in an eight degrees of freedom (8-DOF) vehicle suspension model, subjected to a standard ISO road profile. The control performance is compared against a controlled system with few Q and R parameters, an active system without optimized gain matrices, and an optimized passive system.

The control with 12 optimized parameters for Q and R provided the best vibration attenuation, reducing significantly the Root Mean Square (RMS) accelerations at the driver’s seat and car body.

The research has positive implications in a wide class of active control systems, especially those based on a LQR, which was verified by the multibody dynamic systems tested in the paper.

Better active control gains can be devised to improve performance in vibration attenuation.

The main contribution proposed in this work is the improvement of the Q and R parameters simultaneously, in a full 8-DOF vehicle model, which minimizes the driver’s seat acceleration and, at the same time, guarantees vehicle safety.

The purpose of this study is to evaluate the 3D printability of a multimaterial, fully self-supporting auxetic structure. This will contribute to expanding the application of additive manufacturing (AM) to new products, such as automotive suspensions.

An experimental approach for sample fabrication on a multiextruder 3D printer and characterization by compression testing was conducted along with numerical simulations, which were used to support the design of different auxetic configurations for the jounce bumper.

The effect of stacking different auxetic cell modules was discussed, and the findings demonstrated that a one-piece printed structure has a better performance than one composed of multiple single modules stacked on top of each other.

The quality of the 3D printing process affected the performance of the final components and reproducibility of the results. Therefore, researchers are encouraged to further study component fabrication optimization to achieve a more reliable process.

This research work can help improve the manufacturing and functionality of a critical element of automotive suspension systems, such as the jounce bumper, which can efficiently reduce noise, vibration and harshness by absorbing impact energy.

In previous research, auxetic structures for the application of jounce bumpers have already been suggested. However, to the best of the authors’ knowledge, in this work, an AM approach was used for the first time to fabricate multimaterial auxetic structures, not only by co-printing a flexible thermoplastic polymer with a stiffer one but also by continuously extruding multilevel structures of auxetic cell modules.

The safety and reliability of high-speed trains rely on the structural integrity of their components and the dynamic performance of the entire vehicle system. This paper aims to define and substantiate the assessment of the structural integrity and dynamical integrity of high-speed trains in both theory and practice. The key principles and approaches will be proposed, and their applications to high-speed trains in China will be presented.

First, the structural integrity and dynamical integrity of high-speed trains are defined, and their relationship is introduced. Then, the principles for assessing the structural integrity of structural and dynamical components are presented and practical examples of gearboxes and dampers are provided. Finally, the principles and approaches for assessing the dynamical integrity of high-speed trains are presented and a novel operational assessment method is further presented.

Vehicle system dynamics is the core of the proposed framework that provides the loads and vibrations on train components and the dynamic performance of the entire vehicle system. For assessing the structural integrity of structural components, an open-loop analysis considering both normal and abnormal vehicle conditions is needed. For assessing the structural integrity of dynamical components, a closed-loop analysis involving the influence of wear and degradation on vehicle system dynamics is needed. The analysis of vehicle system dynamics should follow the principles of complete objects, conditions and indices. Numerical, experimental and operational approaches should be combined to achieve effective assessments.

The practical applications demonstrate that assessing the structural integrity and dynamical integrity of high-speed trains can support better control of critical defects, better lifespan management of train components and better maintenance decision-making for high-speed trains.

Realistic composite vehicles with 2, 3, 5 and 9 axles, consisting of a truck with one or two trailers, are addressed in this paper by computational models for vehicle–bridge interaction analysis.

The vehicle–bridge interaction (VBI) models are formed by sets of 2-D rigid blocks interconnected by mass, damping and stiffness elements to simulate their suspension system. The passage of the vehicles is performed at different speeds. Several rolling surface profiles are admitted, considering the maintenance grade of the pavement. The spectral density functions are generated from an experimental database to form the longitudinal surface irregularity profiles. A computational code written in Phyton based on the finite element method was developed considering the Euler–Bernoulli beam model.

Several models of composite heavy vehicles are presented as manufactured and currently travel on major roads. Dynamic amplification factors are presented for each type of composite vehicle.

The VBI models for compound heavy vehicles are 2-D.

This work contributes to improving the safety and lifetime of the bridges, as well as the stability and comfort of the vehicles when passing over a bridge.

The structural response of the bridge is affected by the type and size of the compound vehicles, their speed and the conservative grade of the pavement. Moreover, one axle produces vibrations that can be superposed by the vibrations of the other axles. This effect can generate not usual dynamic responses.

With the increased speed and mileage of high-speed lines, the problem of rail wear is increasing. In actual operation, a large number of abnormal wear phenomena occur on both vehicles and rails during fixed line operation; therefore, the purpose of the study is to explored the rail wear for a variety of vehicles running in mixed operation.

This paper used the universal mechanism multibody dynamics software to establish the CRH2 high speed train (HST) and the CRH3 HST vehicle dynamic models, respectively. The mixed running of HSTs on the effect of rail wear evolution law was analyzed. The rail wear of the two vehicles with different curve radii, different wheel diameters and different under-rail stiffness was compared and analyzed.

The result showed that the rail wear of CRH3 HST is greater than that of CRH2 HST. The rail wear in the tangent track under mixed operation conditions is 25.4% less than when CRH3 HST operated independently. When there is a 1-mm wheel diameter difference, the maximum rail wear of CRH2 HST and CRH3 HST increases by 263% and 44%, respectively. The amount of rail wear is proportional to the under-rail stiffness, and the position of the maximum wear is almost unchanged.

Most studies on the evolution law of rail wear are conducted for a single vehicle type and a single line. This study explored the mixed running of HSTs on the effect of rail wear evolution law.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2023-0276/

This paper aims to obtain the evolution law of dynamic performance of CR400BF electric multiple unit (EMU).

Using the dynamic simulation based on field test, stiffness of rotary arm nodes and damping coefficient of anti-hunting dampers were tested. Stiffness, damping coefficient, friction coefficient, track gauge were taken as random variables, the stochastic dynamics simulation method was constructed and applied to research the evolution law with running mileage of dynamic index of CR400BF EMU.

The results showed that stiffness and damping coefficient subjected to normal distribution, the mean and variance were computed and the evolution law of stiffness and damping coefficient with running mileage was obtained.

Firstly, based on the field test we found that stiffness of rotary arm nodes and damping coefficient of anti-hunting dampers subjected to normal distribution, and the evolution law of stiffness and damping coefficient with running mileage was proposed. Secondly stiffness, damping coefficient, friction coefficient, track gauge were taken as random variables, the stochastic dynamics simulation method was constructed and applied to the research to the evolution law with running mileage of dynamic index of CR400BF EMU.

According to relevant research, non-uniform speed has a significant impact on the vehicle-track systems. Up to now, research work on it is still very limited. In this paper, the PEM is adopted to further transform it into a deterministic process to solve the vehicle’s problem of running at a non-uniform speed.

The multi-body vehicle model has 10 degrees of freedom and the track is regarded as a finite long beam supported by lumped sleepers and ballast blocks. They are connected via linear Hertz springs. The vertical track irregularity is a Gaussian stationary process in the space domain. It is transformed into a uniformly modulated nonstationary random process in the time domain with respect to the non-uniform vehicle speed. By solving the equation of motion of the coupled vehicle-track system with the pseudo-excitation method, the pseudo-response and consequently the power spectral density and the standard deviation of the structural response can be obtained.

Two kinds of vehicle braking programs are taken in the numerical example and some beneficial conclusions are drawn.

The pseudo-excitation method (PEM) was used to perform the random vibration analysis of a coupled non-uniform speed vehicle-track system. Transforming the track irregularity into a uniformly modulated nonstationary random process in time domain with respect to the non-uniform vehicle speed was undertaken. The pseudo-response of the coupled system is solved by applying the Newmark algorithm with constant space integral steps. The random vibration transfer mechanism of the coupled system is fully discussed.

With the continuous increase in the operating speed of high-speed trains, the wear and tear of rails on high-speed lines has also gradually deteriorated. At present, the phenomenon of asymmetric wear of rails in high-speed lines is relatively serious. This paper aims to analyze the effect of three typical rail profile wear on vehicle operation performance.

To solve this problem, by analyzing the wheel-rail contact relationship and establishing a vehicle dynamics model, the influence of worn typical rail profiles on the vehicle’s dynamic performance and carbody abnormal vibration is analyzed. Additionally, the effect of worn rail profiles on wheel wear is analyzed using a wear model.

The results showed that, compared to the standard rail profile, the three typical wear rail profiles show an increase in normal contact stress. The ride and safety indexes of the three rail profiles also increased compared with the CHN60 profile. The rail Profile 3 does not affect carbody vibration, while Profile 1 and Profile 2 can cause hunting vibrations of the carbody, with the main vibration frequencies around 7 Hz. The wheel wear depths under three typical rail profiles are 1.185 mm, 1.11 mm and 1.058 mm.

The effect of the measured typical rail profiles on the vehicle’s performance is analyzed, particularly in terms of abnormal vibrations and wheel wear. This analysis can provide guidance for the long-term maintenance of the rail system.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2023-0270/

This paper aims to present numerical simulations for a series of flight processes for the postlaunching stage of the “balloon-borne UAV system.” It includes the balloon further ascent motion after airborne launching. In terms of unmanned aerial vehicles (UAVs), the tailspin state and the charge-out process with an anti-tailspin parachute-assisted suspending are analyzed. Then, the authors conduct trajectory optimization simulations for the long-distance gliding process.

The balloon kinematics model and the parachute Kane multibody dynamic model are established. Using steady-state tailspin to reduced-order analysis and achieving change-out simulation by parachute suspension dynamic model. A reentry optimization control problem is developed and the Radau pseudo-spectral method is used to calculate the glide trajectory.

The established dynamic model and trajectory optimization method can effectively simulate the motion process of balloons and UAVs. The system mass reduction for launching UAVs will not cause damage to the balloon structure. The anti-tailspin parachute can reduce the UAV attack angles effectively. The UAV can glide to the designated target position by adjusting the attack angle and sideslip angle. The farthest flight distance after launching from 20 km height is 94 km and the gliding time is 40 min, which demonstrates the potential application advantage of high-altitude launching.

The research content and related conclusions of this article achieve a closed-loop analysis of the flight mission chain for the “balloon-borne UAV system,” which provides simulation references for relevant balloon launching experiments.

This paper establishes a complete set of numerical simulation models and can effectively analyze various postlaunching behaviors.