Search results

The purpose of the current flow configurations is to bring to attention the thermophysical aspects of magnetohydrodynamics (MHD) Williamson nanofluid flow under the effects of Joule heating, nonlinear thermal radiation, variable thermal coefficient and activation energy past a rotating stretchable surface.

A mathematical model is examined to study the heat and mass transport analysis of steady MHD Williamson fluid flow past a rotating stretchable surface. Impact of activation energy with newly introduced variable diffusion coefficient at the mass equation is considered. The transport phenomenon is modeled by using highly nonlinear PDEs which are then reduced into dimensionless form by using similarity transformation. The resulting equations are then solved with the aid of fifth-order Fehlberg method.

The rotating fluid, heat and mass transport effects are analyzed for different values of parameters on velocity, energy and diffusion distributions. Parameters like the rotation parameter, Hartmann number and Weissenberg number control the flow field. In addition, the solar radiation, Joule heating, Prandtl number, thermal conductivity, concentration diffusion coefficient and activation energy control the temperature and concentration profiles inside the stretching surface. It can be analyzed that for higher values of thermal conductivity, Eckret number and solar radiation parameter the temperature profile increases, whereas opposite behavior is noticed for Prandtl number. Moreover, for increasing values of temperature difference parameter and thermal diffusion coefficient, the concentration profile shows reducing behavior.

This paper is useful for researchers working in mathematical and theoretical physics. Moreover, numerical results are very useful in industry and daily-use processes.

The purpose of this paper is to analyze numerically the blowup in finite time of the solutions to a one-dimensional, bidirectional, nonlinear wave model equation for the propagation of small-amplitude waves in shallow water, as a function of the relaxation time, linear and nonlinear drift, power of the nonlinear advection flux, viscosity coefficient, viscous attenuation, and amplitude, smoothness and width of three types of initial conditions.

An implicit, first-order accurate in time, finite difference method valid for semipositive relaxation times has been used to solve the equation in a truncated domain for three different initial conditions, a first-order time derivative initially equal to zero and several constant wave speeds.

The numerical experiments show a very rapid transient from the initial conditions to the formation of a leading propagating wave, whose duration depends strongly on the shape, amplitude and width of the initial data as well as on the coefficients of the bidirectional equation. The blowup times for the triangular conditions have been found to be larger than those for the Gaussian ones, and the latter are larger than those for rectangular conditions, thus indicating that the blowup time decreases as the smoothness of the initial conditions decreases. The blowup time has also been found to decrease as the relaxation time, degree of nonlinearity, linear drift coefficient and amplitude of the initial conditions are increased, and as the width of the initial condition is decreased, but it increases as the viscosity coefficient is increased. No blowup has been observed for relaxation times smaller than one-hundredth, viscosity coefficients larger than ten-thousandths, quadratic and cubic nonlinearities, and initial Gaussian, triangular and rectangular conditions of unity amplitude.

The blowup of a one-dimensional, bidirectional equation that is a model for the propagation of waves in shallow water, longitudinal displacement in homogeneous viscoelastic bars, nerve conduction, nonlinear acoustics and heat transfer in very small devices and/or at very high transfer rates has been determined numerically as a function of the linear and nonlinear drift coefficients, power of the nonlinear drift, viscosity coefficient, viscous attenuation, and amplitude, smoothness and width of the initial conditions for nonzero relaxation times.

Improving the competitiveness of East Africa's rice industries necessitates increased and viable production of rice of the quality desired by consumers. This paper aims to understand consumer preferences for rice quality attributes in Uganda and Kenya to inform the countries' rice breeding programs and value chain development interventions.

Rice samples are obtained from retail markets in various districts/counties across the two countries. The samples are analyzed in a grain quality laboratory for the rice's physicochemical characteristics and the resulting data are used to non-parametrically estimate hedonic price functions. District/county dummies are included to account for potential heterogeneity in consumer preferences.

Ugandan consumers are willing to pay a price premium for rice with a relatively high proportion of intact grains, but the consumers discount chalkiness. Kenyan consumers discount high amylose content and impurities. There is evidence of heterogeneity in consumer preferences for rice in Mbale, Butaleja and Arua districts of Uganda and in Kericho and Busia counties of Kenya.

The study makes a novel contribution to the literature on consumer preferences for rice in East Africa by applying a hedonic pricing model to the data generated from a laboratory analysis of the physicochemical characteristics of rice samples obtained from the market. Rather than base our analysis on consumers' subjective sensory assessment of the quality characteristics of rice, standard laboratory methods are used to generate the data, which enables a more objective assessment of the relationship between market prices and the quantities of attributes present in the rice samples.

The purpose of this paper is to present a fast and bare bones implementation of a numerical method for quickly simulating turbulent thermal flows on GPUs. The work also validates earlier research showing that the lattice Boltzmann method (LBM) method is suitable for complex thermal flows.

A dual lattice hydrodynamic (D3Q27) thermal (D3Q7) multiple-relaxation time LBM model capable of thermal DNS calculations is implemented in CUDA.

The model has the same computational performance compared to earlier publications of similar LBM solvers. The solver is validated against three benchmark cases for turbulent thermal flow with available data and is shown to be in excellent agreement.

The combination of a D3Q27 and D3Q7 stencil for a multiple relaxation time -LBM has, to the authors’ knowledge, not been used for simulations of thermal flows. The code is made available in a public repository under a free license.

The paper aims to throw light on the interactions taking place between the different chemical compositions at various temperatures. P-methylacetophenone is a polar dissolvable, which is positively related by dipole–dipole co-operations and is exceptionally compelling a direct result of the shortfall of any critical primary impacts because of the absence of hydrogen bonds; hence, it might work an enormous dipole moment (μ = 3.62 D). Alcohols additionally assume a significant part in industries and research facilities as reagents and pull in incredible consideration as helpful solvents in the green innovation. They are utilized as pressure-driven liquids in drugs, beauty care products, aromas, paints removers, flavors, dye stuffs and as a germ-free specialist.

Mixtures were prepared by mass in airtight ground stopper bottles. The mass measurements were performed on a digital electronic balance (Mettler Toledo AB135, Switzerland) with an uncertainty of ±0.0001 g. The uncertainty in mole fraction was thus estimated to be less than ±0.0001. The densities of pure liquids and their mixtures were determined using a density meter (DDH-2911, Rudolph Research Analytical). The instrument was calibrated frequently using deionized doubly distilled water and dry air. The estimated uncertainty associated with density measurements is ±0.0003 g.cm⁻³. Viscosities of the pure liquids and their mixtures were determined by using Ostwald’s viscometer. The viscometer was calibrated at each required temperature using doubly distilled water. The viscometer was cleaned, dried and is filled with the sample liquid in a bulb having capacity of 10 ml. The viscometer was then kept in a transparent walled water bath with a thermal stability of ±0.01K for about 20 min to obtain thermal equilibrium. An electronic digital stop watch with an uncertainty of ±0.01 s was used for the flow time measurements for each sample at least four readings were taken and then the average of these was taken.

Negative values of excess molar volume, excess isentropic compressibility and positive values of deviation in viscosity including excess Gibbs energy of activation of viscous flow at different temperatures (303.15, 308.15 and 313.15 K) may be attribution to the specific intermolecular interactions through the hetero-association interaction between the components of the mixtures, resulting in the formation of associated complexes through hydrogen bond interactions.

The excess molar volume (V^E) values were analyzed with the Prigogine–Flory–Patterson theory, which demonstrated that the free volume contribution is the one of the factors influencing negative values of excess molar quantities. The Jouyban–Acree model was used to correlate the experimental values of density, speed of sound and viscosity.

The paper targets on providing new experimental data for validation of the well-established mathematical models within the framework of the lattice Boltzmann method (LBM), which are applied to problems of casting processes in complex mould cavities.

An experimental campaign aiming at the free-surface flow within a system of narrow channels is designed and executed under well-controlled laboratory conditions. An in-house lattice Boltzmann solver is implemented. Its algorithm is described in detail and its performance is tested thoroughly using both the newly recorded experimental data and well-known analytical benchmark tests.

The benchmark tests prove the ability of the implemented algorithm to provide a reliable solution when the surface tension effects become dominant. The convergence of the implemented method is assessed. The two new experimentally studied problems are resolved well by simulations using a coarse computational grid.

A detailed set of original experimental data for validation of computational schemes for simulations of free-surface gravity-driven flow within a system of narrow channels is presented.

Joule heating effect is a pervasive phenomenon in electro-osmotic flow because of the applied electric field and fluid electrical resistivity across the microchannels. Its effect in electro-osmotic flow field is an important mechanism to control the flow inside the microchannels and it includes numerous applications.

This research article details the numerical investigation on alterations in the profile of stream wise velocity of simple Couette-electroosmotic flow and pressure driven electro-osmotic Couette flow by the dynamic viscosity variations happened due to the Joule heating effect throughout the dielectric fluid usually observed in various microfluidic devices.

The advantages of the Joule heating effect are not only to control the velocity in microchannels but also to act as an active method to enhance the mixing efficiency. The results of numerical investigations reveal that the thermal field due to Joule heating effect causes considerable variation of dynamic viscosity across the microchannel to initiate a shear flow when EDL (Electrical Double Layer) thickness is increased and is being varied across the channel.

This research work suggest how joule heating can be used as en effective mechanism for flow control in microfluidic devices.

Sago starch (Metroxylon sagu Rottb.) is one of the starches imported into Japan. Recently, sago starch has been promoted as a healthy type of starch because it is gluten-free and non-allergenic. This study aims to identify the factors affecting sago starch import demand during the period 1978–2017 in Japan by using a double logarithmic linear function. The study revealed that the price of sago starch, GDP, aging population rate and tariff-rate quota policy are significant factors influencing sago starch importation in Japan.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

This paper aims to study the influence of the dimension change of bush-pin on the pressure, oil film thickness, temperature rise and traction coefficient in contact zone by using a thermal elastohydrodynamic lubrication (EHL) model for finite line contact. Concretely, the effects of the equivalent curvature radius of the bush and the pin, and the length of the bush are investigated.

In this paper, the contact between the bush and pin is simplified as finite line contact. The lubrication state is studied by numerical simulation using steady-state line contact thermal EHL. A constitutive equation Ree–Eyring fluid is used in the calculations.

It is found that by selecting an optimal equivalent radius of curvature and prolonging the bush length can improve the lubrication state effectively.

Under specific working conditions, there exists an optimal equivalent radius to maximize the minimum oil film thickness in the contact zone. The increase of generatrix length will weaken the stress concentration effect in the rounded corner area at both ends of the bush, which can improve the wear resistance of chain.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0448.