Search results

To address the absence of Lean in transportation logistics in the digital era, this study aims to investigate the application of Lean transportation (LT) tools to reduce waste and facilitate the digital transformation of dedicated road transportation in the offshore industry.

The study adopts action research with a multimethod approach, including a scoping review, focus groups (FG) and participant observation. The research is conducted within the offshore supply chain of a major oil and gas company.

Implementing LT’s continuous improvement tools, particularly value stream mapping (VSM), reduces offshore transportation waste and provides empirical evidence about the intersection of Lean and digital technologies. Applying techniques drawn from organisational learning theory (OLT), stakeholders involved in VSM mapping and FGs engage in problem-solving and develop action plans, driving digital transformation. Waste reduction in loading and unloading stages leads to control actions, automation and process improvements, significantly reducing downtime. This results in an annual monetary gain of US$1.3m. The study also identifies waste related to human effort and underutilised digital resources.

This study contributes to theory and practice by using action research and LT techniques in a real intervention case. From the lens of OLT, it highlights the potential of LT tools for digital transformation and demonstrates the convergence of waste reduction through Lean and Industry 4.0 technologies in the offshore supply chain. Practical outputs, including a benchmarking questionnaire and a plan-do-check-act cycle, are provided for other companies in the same industry segment.

This study is focused to support an ongoing development project of the case company's current state and the challenges of the order-to-cash (O2C) process. The O2C process is the most visible process to the customer, and therefore, its punctual and fluent order management is vital. It is observed that the high degree of manual work in the O2C process causes mistakes, delays and rework in the process. The purpose of this article is therefore to analyze the case company's current state of the O2C process as well as to identify the areas of development in this process by deploying the means of Lean Six Sigma tools such as value stream mapping (VSM).

The study was conducted as a mix of quantitative and qualitative analysis. Based on both the quantitative and qualitative data, a workshop on VSM was organized to analyze the current state of the O2C process of a case company, engaged in the energy and environment sector in Finland.

The results found that excessive manual work was highly connected to inadequate or incorrect data in pricing and invoicing activities, which resulted in canceled invoices. Canceled invoices are visible to the customer and have a negative impact on the customer experience. This study found that by improving the performance of the O2C process activities and improving communication among the internal and external stakeholders, the whole O2C process can perform more effectively and provide better customer value.

The O2C process is the most visible process to the customer and therefore its punctual and fluent order management is vital. To ensure that the O2C process is operating as desired, suitable process performance metrics need to be aligned and followed. The results gathered from the case company's data, questionnaire interviews, and the VSM workshop are all highlighted in this study. The main practical and managerial implications were to understand the real-time O2C process performance, which is necessary to ensure strong performance and enhance continuous improvement of the O2C process that leads to operational excellence and commercial competitiveness of the studied case company.

Despite differing strategies towards environmental sustainability in developed and developing nations, the manufacturing sector in these regional domains faces substantial environmental issues. The purpose of this study is to examine the green-lean-six sigma (GLSS) enablers and outcomes for enhancing environmental sustainability of manufacturing firms in both, a developed and developing country context by using an environment-centric natural resource-based view (NRBV).

First, a framework of GLSS enablers and outcomes aligned with the NRBV strategic capabilities is proposed through a systematic literature review. Second, this framework is used to empirically investigate the GLSS enablers and outcomes of manufacturing firms through in-depth interviews with lean six sigma and environmental consultants from New Zealand (NZ) and Pakistan (PK) (developed and developing nations).

Analysis from both regional domains highlights the use of GLSS enablers and outcomes under different NRBV capabilities of pollution prevention, product stewardship and sustainable development. A comparison reveals that NZ firms practice GLSS to comply with environmental regulatory requirements, avoid penalties and maintain their clean-green image. Conversely, Pakistani firms execute GLSS to reduce energy use, satisfy international customers and create a green image.

This paper provides new insights on GLSS for environmental sustainability which can assist industrial experts and academia for future strategies and research.

This is one of the early comparative studies that has used the NRBV to investigate GLSS enablers and outcomes in manufacturing firms for enhancing environmental performance comparing developed and developing nations

Lean management tools are becoming increasingly applied in different types of organizations around the world. These tools have shown their significant contribution to improving business performance. In this vein, the purpose of this paper is to examine the influence of lean management on both occupational safety and operational excellence in Tunisian companies.

A survey was conducted among Tunisian companies, and it resulted in the collection of 62 responses that were analyzed using the software SPSS. In addition, a conceptual model linking the practices of the three basic concepts was designed to highlight the hypotheses of the research. Subsequently, factor analysis and structural equation method analysis were conducted to assess the validation of the assumptions.

The results obtained have shown that lean management has a significant impact on occupational safety. Similarly, occupational safety has a significant impact on operational excellence. However, lean management does not have a significant impact on operational excellence.

This work highlighted the involvement of small and medium-sized enterprise’s managers from emerging economies in the studied concepts’ practices. Likewise, it testified to the impacts of lean management on occupational safety and operational excellence in the Tunisian context.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

This study aims to analyze lean wastes for the poultry sector in Turkey and link lean tools to this study, focusing on identifying each lean waste that affects poultry production and proposing solutions for preventing these lean wastes in the sector. The proposed solutions aim to improve processes by suggesting different lean tools and their applications for the poultry sector.

The study consists of two different applications. First, the waste relationship matrix (WRM) was created to reveal the relationship between seven lean wastes and their importance order. Then, after determining lean tools for eliminating lean wastes, the optimum weight ranking and consistency ratio of the most suitable lean tools were calculated for these wastes and ranked with the best-worst method (BWM).

Results showed that overproduction is the most critical waste that impacts other wastes, followed by defect waste. Due to the nature of the sector, these wastes not only result in economic loss for the company but also in food waste and loss and issues related to animal welfare. Furthermore, the Kaizen approach and 5S implementation are the methods to eliminate these wastes. Detailed discussion on the link between lean tools and lean wastes is provided for the poultry sector.

This is the first study that theoretically and empirically identifies the potential lean waste affecting the poultry sector and provides lean tools for eliminating these wastes. Sector-specific explanations and discussions are presented in the study to show the applicability of lean approaches in the poultry sector to eliminate waste. In addition, this study is the first to integrate the WRM and BWM.

The aim of this paper is to explore the implementation of an integrated lean and ISO 14001 approach in meat industry for environmental performance and examine a proposed conceptual framework by capturing insights from lean and ISO 14001 experts in New Zealand (NZ).

Semi-structured interviews have been conducted with a group of consultants (lean and ISO 14001) to evaluate the suitability of an integrated lean and ISO 14001 approach in the meat industry for environmental performance. A conceptual framework from literature has guided this study leading to its further development based on the empirical evidence collected.

Findings have illustrated a synergistic positive impact of lean and ISO 14001 implementation as an integrated approach for sustaining environmental performance in the meat industry. A joint implementation program provides more clarity in aligning ISO 14001 operational procedures with lean tools and techniques for an enhanced environmental performance outcome.

The application of an integrated lean and ISO 14001 framework is proposed in this paper, which can help industry practitioners and academia in developing a joint implementation strategy and conducting future research.

To the best of the author’s knowledge, this study is the first to assess the effective implementation of lean and ISO 14001 as an integrated approach in the NZ meat industry.

The various quality improvement (QI) frameworks and maturity models described in the health services literature consider some aspects of QI while excluding others. This paper aims to present a concerted attempt to create a quality improvement maturity model (QIMM) derived from holistic principles underlying the successful implementation of system-wide QI programmes.

A hybrid methodology involving a systematic review (Phase 1) of over 270 empirical research articles and books developed the basis for the proposed QIMM. It was followed by expert interviews to refine the core constructs and ground the proposed QIMM in contemporary QI practice (Phase 2). The experts included academics in two academic conferences and 59 QI managers from the New Zealand health-care system. In-depth interviews were conducted with QI managers to ascertain their views on the QIMM and its applicability in their respective health organisations (HOs).

The QIMM consists of four dimensions of organisational maturity, namely, strategic, process, supply chain and philosophical maturity. These dimensions progress through six stages, namely, identification, ad-hoc, formal, process-driven, optimised enterprise and finally a way of life. The application of the QIMM by the QI managers revealed that the scope of QI and the breadth of the principles adopted by the QI managers and their HOs in New Zealand is limited.

The importance of QI in health systems cannot be overstated. The proposed QIMM can help HOs diagnose their current state and provide a guide to action achieving a desirable state of quality improvement maturity. This QIMM avoids reliance on any single QI methodology. HOs – using the QIMM – should retain full control over the process of selecting any QI methodology or may even cherry-pick principles to suit their needs as long as they understand and appreciate the true nature and scope of quality overstated. The proposed QIMM can help HOs diagnose their current state and provide a guide to action achieving a desirable state of quality improvement maturity. This QIMM avoids reliance on any single QI methodology. HOs – using the QIMM – should retain full control over the process of selecting any QI methodology or may even cherry-pick principles to suit their needs as long as they understand and appreciate the true nature and scope of quality.

This paper contributes new knowledge by presenting a maturity model with an integrated set of quality principles for HOs and their extended supply networks.

The aim of this paper is to explore the possibility of using the Define-Measure-Analyze-Improve-Control (DMAIC) cycle, process mining (PM) and multi-criteria decision methods in an integrated way so that these three elements combined result in a methodology called the Agile DMAIC cycle, which brings more agility and reliability in the execution of the Six Sigma process.

The approach taken by the authors in this study was to analyze the studies arising from this union of concepts and to focus on using PM tools where appropriate to accelerate the DMAIC cycle by improving the first two steps, and to test using the AHP as a decision-making process, to bring more excellent reliability in the definition of indicators.

It was indicated that there was a gain with acquiring indicators and process maps generated by PM. And through the AHP, there was a greater accuracy in determining the importance of the indicators.

Through the results and findings of this study, more organizations can understand the potential of integrating Six Sigma and PM. It was just developed for the first two steps of the DMAIC cycle, and it is also a replicable method for any Six Sigma project where data acquisition through mining is possible.

The authors develop a fully applicable and understandable methodology which can be replicated in other settings and expanded in future research.

Small and medium-scale enterprises (SMEs) that operate with modest financial investments and commodities face numerous challenges to remain in business. One major philosophy used by SMEs these days is the implementation of lean manufacturing to get solutions for various issues they encounter. But is lean getting sustained over time? The purpose of this research is to design a Sustainable Lean Performance Index (SLPI) to assess the sustainability of lean systems and to pinpoint the variables that might be present as potential lean system inhibitors which hinder the sustainability of leanness.

A multi-level sustainable lean performance model is constructed and presented based on the literature research, field investigation and survey conducted by administering a questionnaire. Fuzzy logic approach is used to analyse the multi-level model.

SLPI for the SMEs is found using fuzzy logic approach. Additionally, the ranking score system is applied to categorise attributes into weak and strong categories. The performance of the current lean system is determined to be “fair” based on the Euclidean distance approach and the SLPI for SMEs.

This work is concentrated only in South India because of the country’s vast geographical area and rich and wide diversity in industrial culture of the nation. Hence, more work can be done incorporating the other parts of the country and can analyse the lean behaviour in a comparative manner.

The generalised sustainable lean model analysed using fuzzy logic identifies the inhibitors and level of performance of SMEs in South India. This can be implemented to find out the level of performance in the SMEs after a deeper study and analysis around the SMEs of the country.

The sustainable assessment of lean parameters in the SMEs of India is found to be very less in literature, and it lacks profundity. The model established in this study assesses the sustainability of the lean methodology adopted in SMEs by considering the lean and sustainability attributes along with enablers like technology, ethics, customer satisfaction and innovation with the aid of fuzzy logic.