Search results

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

The purpose of this paper is to investigate the prominence of mechanical excitations at the time of welding. In the past years, the process of welding technology has expanded its influence in manufacturing. The crucial drawback of conventional welding is prompted by internal stresses and distortions, which is the focal reason for weld defects. These weld defects can be diminished by the process called post-weld heat treatment (PWHT), which consumes more working hours and needs skilled workers. To replace these PWHT processes, mechanical vibrations are introduced during the process of welding to diminish these weld defects.

In the current research, the mechanical vibrations are transferred to weld-pool through vibro-motor and DC motor connected to the electrode. As per standards, the tensile test specimens were prepared for welding with different voltages of vibro-motor and DC motor respectively. The weld joints were tested for tensile strength and analyzed the microstructure at the fusion zone.

Melt-ability at fusion zone of 1018 mild steel was investigated by the single-stroke intense heat process of fusion welding. It is observed that the mechanical vibrations technique has a profound influence on the enhancement of the fusion zone characteristics and grain structure. The peak value of the tensile strength is observed at 100 s of vibration, 190 V of vibro-motor voltage and 18 V of electrode voltage. The tensile strength of the welded joints with vibrations is increased up to 22.64% when it is compared with conventional welding. The enhancement of the tensile strength of the weld bead was obtained because of the formation of fine grain structure. So, mechanical vibrations are identified as the most convenient method for improving the mild steel alloys weld quality.

A novel approach called mechanical vibrations during the process of welding is implemented for fusion zone refinement.

Vibratory weld conditioning parameters have a great influence on the improvement of mechanical properties of weld connections. The purpose of this paper is to understand the influence of vibratory weld conditioning on the mechanical and microstructural characterization of aluminum 5052 alloy weldments. An attempt is made to understand the effect of the vibratory tungsten inert gas (TIG) welding process parameters on the hardness, ultimate tensile strength and microstructure of Al 5052-H32 alloy weldments.

Aluminum 5052 H32 specimens are welded at different combinations of vibromotor voltage inputs and time of vibrations. Voltage input is varied from 50 to 230 V at an interval of 10 V. At each voltage input to the vibromotor, there are three levels of time of vibration, i.e. 80, 90 and 100 s. The vibratory TIG-welded specimens are tested for their mechanical and microstructural properties.

The results indicate that the mechanical properties of aluminum alloy weld connections improved by increasing voltage input up to 160 V. Also, it has been observed that by increasing vibromotor voltage input beyond 160 V, mechanical properties were reduced significantly. It is also found that vibration time has less influence on the mechanical properties of weld connections. Improvement in hardness and ultimate tensile strength of vibratory welded joints is 16 and 14%, respectively, when compared without vibration, i.e. normal weld conditions. Average grain size is measured as per ASTM E 112–96. Average grain size is in the case of 0, 120, 160 and 230 is 20.709, 17.99, 16.57 and 20.8086 µm, respectively.

Novel vibratory TIG welded joints are prepared. Mechanical and micro-structural properties are tested.

The purpose of this paper is to analyse the relationship between operational risk management (ORM), size, and ownership of Indian banks. This is important in the context of financial crisis experienced by developed countries due to lax regulation.

ORM practices of Indian banks are proxied by excess capital (over the required minimum capital for operational risk). Size of a bank is measured as deposits plus advances. Our sample includes 61 Indian banks during the period from 2010 to 2013. The authors empirically examine the impact of bank size on excess capital using panel data regression model.

The results suggest that size of Indian banks is inversely related to excess capital held by them for managing operational risk. The inverse relationship implies that smaller banks hold higher excess capital over the required minimum as per Basel norms. There is no significant relationship between ownership (public, private and foreign) and excess capital held by banks for managing operational risk.

The study has implications for Indian banks given the high level of losses due to bad loans, and the implementation of Basel III norms by the central bank, i.e. Reserve Bank of India.

The study has implications for Indian financial system as a large percentage (about 33 per cent) of household savings are deployed in deposits with commercial banks and other financial institutions. The bank failure(s) can have disastrous consequences for the Indian economy as the capacity of the Indian financial system to withstand such shocks is highly doubtful.

There is very little evidence on ORM practices of Indian banks, and its relationship with size and ownership. The study assumes significance in the context of significant changes in the institutional and regulatory framework.

However, due to the huge number of studies and on the other hand to be new and creative, the represented models and methods – as the two main parts of this field – have been got more complicated, which consequently have been turned into unpractical research studies for the realistic situations. Therefore, the purpose of this study is the representation of a novel and simple method to deal with the aforementioned gap.

To this end, Fazl-Tash method have been proposed, in which a thorough and complete model including 114 criteria and a simple technique to rank and select the best supplier have been presented. Sustainability and resiliency are considered in collecting criteria effective on supplier selection.

The method was carried out in a case study in an industrial company. The efficiency of the proposed method is evaluated in comparison with other conventional approaches.

As selecting the supplier plays a crucial role to bring some important advantages for companies, such as coping with the cost and time problems and influencing the majority of contemporary markets’ requirements, in recent years, there have been representing more effective studies in the supplier selection literature.

This study aims to investigate the optimal process parameters of the wire-cut electrical discharge machining (WCEDM) for the machining of the GZR-AA7475 hybrid metal matrix composite (HMMC). HMMCs are prepared with 2 Wt.% graphite and 4 Wt.% zirconium dioxide reinforced with aluminium alloy 7475 (GZR-AA7475) composite by using the stir casting method. The objective is to enhance the mechanical properties of the material while preserving its unique features. WCEDM with a 0.18 mm molybdenum wire electrode is used for machining the composite.

To conduct experimental studies, a Taguchi L27 orthogonal array was adopted. Input variables such as peak current (I_p), pulse-on-time (T_ON) and flushing pressure (P_F) were used. The effect of process parameters on the output responses, such as material removal rate (MRR), surface roughness rate (SRR) and wire wear ratio (WWR), were investigated. The grey relational analysis (GRA) is used to obtain the optimal combination of the process parameters. Analysis of variance (ANOVA) was also used to identify the significant process parameters affecting the output responses.

Results from the current study concluded that the optimal condition for grey relational grade is obtained at T_ON = 105 µs, I_p = 100 A and P_F = 90 kg/cm². Peak current is the most prominent parameter influencing the MRR, whereas SRR and WRR are highly influenced by flushing pressure.

Identifying the optimal process parameters in WCEDM for machining of GZR-AA7475 HMMC. ANOVA and GRA are used to obtain the optimal combination of the process parameters.

The purpose of this study is to investigate the Dynamics of micropolar – water B Fluids flow simultaneously under the influence of thermal radiation and Soret–Dufour Mechanisms.

The thermal radiation contribution, the chemical change and heat generation take fluidity into account. The flow equations are used to produce a series of dimensionless equations with appropriate nondimensional quantities. By using the spectral homotopy analysis method (SHAM), simplified dimensionless equations have been quantitatively solved. With Chebyshev pseudospectral technique, SHAM integrates the approach of the well-known method of homotopical analysis to the set of altered equations. In terms of velocity, concentration and temperature profiles, the impacts of Prandtl number, chemical reaction and thermal radiation are studied. All findings are visually shown and all physical values are calculated and tabulated.

The results indicate that an increase in the variable viscosity leads to speed and temperature increases. Based on the transport nature of micropolar Walters B fluids, the thermal conductivity has great impact on the Prandtl number and decrease the velocity and temperature. The current research was very well supported by prior literature works. The results in this paper are anticipated to be helpful for biotechnology, food processing and boiling. It is used primarily in refrigerating systems, tensile heating to large-scale heating and oil pipeline reduction.

All results are presented graphically and all physical quantities are computed and tabulated.

The Third National Meeting of CDROM/Online Users was sponsored by National Information System for Science and Technology (NISSAT), Department of Scientific and Industrial Research (DSIR), New Delhi; organised by the National Information Centre for Leather & Allied Industries (NICLAI); and held at the Central Leather Research Institute, Madras during 9–10 August 1994. The previous two Meetings were held at New Delhi in 1992 and 1993. The Meeting's objective was to assess the current national and international situation, the utility of CDROM services, and their popularisation within the country, and to provide a forum for exchange of experiences on this new technique. The Meeting focused its attention on databases available, demand for search services, target users, problem areas and possible solutions. The Meeting was attended by 205 participants from 91 institutions all over the country, representing a galaxy of R&D, academic, corporate, entrepreneurial and so forth institutions. Eleven industries engaged in information technology products participated in the Meeting. The Meeting included technical sessions where 39 presentations were made.

The purpose of this paper is to examine the impact of credit risk components on the performance of credit risk management and the growth in non-performing assets (NPAs) of commercial banks in India.

The data are obtained from primary and secondary sources. The primary data are collected by administering questionnaire among risk managers of Indian banks. The secondary data on NPAs of Indian banks are from annual reports and Prowess database compiled by the Centre for Monitoring Indian Economy. Multiple linear regression is used to estimate the models for the study.

The results suggest that the identification of credit risk significantly affects the credit risk performance. The results are robust as credit risk identification is negatively related to annual growth in NPAs or loans. There is evidence in support of a priori expectation of better credit risk performance of private banks compared to that of government banks.

The study has implications for Indian banks suffering from a high level of losses due to bad loans. In addition, it will have implications for the implementation of new Basel Accord norms (Basel III) by the Reserve Bank of India.

The high and rising level of NPAs will have adverse consequences for credit flow in the economy in the absence of appropriate intervention by government and central bank in the form of changes in institutional and regulatory infrastructure. The problems in banking and financial services sector will lead to lower industrial and aggregate economic growth, and lower (or negative) growth in employment.

There is little evidence on credit risk management practices of Indian banks, and its relationship with credit risk performance and NPA growth. The need for an effective risk management system to manage credit risk assumes importance and urgency in the context of high and rising NPAs of Indian banks, and the consequences for the Indian economy.

To assess the state of supply chain management (SCM) research in India and to understand the research trends and methodologies used. The present study also aims to create a taxonomy of the subject areas researched in India.

The present study employed the systematic literature review methodology. Literature from 395 peer journal papers in 67 leading journals over a 20-year period (2000–2020 Quarter-1) was comprehensively reviewed and assessed.

SCM research in India started around the year 2000. The quantum of research was low (single digit) until 2010. There has been steady growth over the last decade, and over 50% of the total papers up until now has been published in the last four years. The present study created a three-tiered taxonomy of the subject areas and classified the papers as per it. The first tier (level-1) has seven categories (SCM strategy, network design, SCM processes and integration, IT systems, skills, performance measurement and others). A perusal of the newly created taxonomy revealed that, except for a few areas under level-1 categories (such as SCM processes and SCM strategy), the other level-1 categories have not seen much research. Similarly, there is little or no research in a large number of level-2 categories (such as outsourcing strategy, channel strategy, demand management, demand fulfillment, customer relationship management, integrated supply chain planning, new product development, returns, supply chain orientation, performance monitoring, performance improvement, SCM adoption process, SCM implementation issues and quantified benefits of SCM). Methodologically, the rigor of SCM research in India needs improvement.

A comprehensive taxonomy of SCM subject areas researched in India at three cascading levels was created for the first time in the present study. The taxonomy will help provide researchers with a clear understanding of the structure of the subject areas and help in identifying areas where research has been carried out and the subject areas where gaps exist for future research to proceed. The present study also provides an overview of the methodological rigor of SCM research in India and points out some of the limitations that researchers should avoid in future studies.