Search results

Outstanding features such as thermal conductivity and superior electrical conductivity of nanofluids unfold a new window in the context of their extensive applications in engineering and industrial domains. The purpose of this study to simulate numerically the magneto-nanofluid flow and heat transfer over a curved stretching surface. Heat transport is explored in the presence of viscous dissipation. At the curved surface, the convective boundary condition is adopted. Three different nanoparticles, namely, copper, aluminium oxide and titanium dioxide are taken into consideration because of easily available in nature.

The basic flow equations are framed in terms of curvilinear coordinates. The modelled partial differential equations are transformed into a system of non-linear ordinary differential equations by means of appropriate similarity transformation. The subsequent non-linear system of equations is then solved numerically by using the Runge–Kutta–Felhberg method with the shooting scheme via bvp4c MATLAB built-in function. Impacts of various physical parameters on velocity, pressure and temperature distributions, local skin-friction coefficient, local Nusselt number and wall temperature are portrayed through graphs and tables followed by a comprehensive debate and physical interpretation.

Graphical results divulge that augmenting values of the magnetic parameter cause a decline in velocity profiles and stream function inside the boundary layer. The magnitude of the pressure function inside the boundary layer reduces for higher estimation of curvature parameter, and it is also zero when the curvature parameter goes to infinity. Furthermore, the temperature is observed in a rising trend with growing values of the magnetic parameter and Biot number.

This research study is very pertinent to the expulsion of polymer sheet and photographic films, metallurgical industry, electrically-conducting polymer dynamics, magnetic material processing, rubber and polymer sheet processing, continuous casting of metals, fibre spinning, glass blowing and fibre, wire and fibre covering and sustenance stuff preparing, etc.

Despite the huge amount of literature available, but still, very little attention is given to simulate the flow configuration due to the curved stretching surface with the convective boundary condition. Very few papers have been examined on this topic and found that its essence inside the boundary layer is not any more insignificant than on account of a stretching sheet. A numerical comparison with the published works is conducted to verify the accuracy of the present study.

The purpose of this article is to analyze the magnetohydrodynamic viscous liquid flow with heat absorption/generation. Flow is induced by an unsteady stretching curved surface. A time-dependent magnetic field is utilized.

The resulting nonlinear system is solved through shooting method.

An increment in the values of curvature A and unsteadiness parameters correspond to higher velocity, temperature and concentration fields. There is a reduction in the temperature and related layer via Prandtl number. Skin friction is increasing factor of magnetic number. Local Nusselt and Sherwood numbers are lower for greater magnetic number.

To the best of author's knowledge, no such consideration has been given in the literature yet.

The study aims to determine an efficiency of external magnetic field on the bacteria surrounded by thousands of magnetic magnetite nanoparticles. The interstitial nanoliquid in which an artificial bacteria swims in biological cell is utilized with variable thermal conductivity. Two dimensions unsteady motion of second grade fluid are considered. The stretching wall is taken as a curved surface pattern.

The mathematical results have been obtained by Chebyshev pseudospectral method.

The impact of the various governing parameters is described by numerical tables and diagrams. It is proven that the pure blood velocity curves are higher when compared with the magnetite/blood. It is demonstrated from clinical disease that dangerous tumors show diminished blood flow. This study concludes that the blood velocity profile increases by increasing the values of fluid parameters. This implies that the medication conveyance therapy lessens the tumor volume and helps in annihilating malignancy cells. The blood temperature distribution raises as the magnetite nanoparticles concentration increases. Consequently, the physical properties of the blood can be enhanced by immersing the magnetite nanoparticles. Further, the present outcomes cleared the thermal conductivity as, a variable function of the temperature, has an important role to enhance the heat transfer rate.

To the best of authors’ knowledge, this study is reported for the first time.

This study aims to focus on second grade fluid flow over a rotating disk in the presence of chemical reaction. Uniform magnetic field is also taken into account. Because of the smaller magnetic Reynolds number, induced magnetic field is negligible. Heat equation is constructed by considering heat source/sink.

Suitable variables are used to transform nonlinear partial differential equations to ordinary ones. Convergent series solutions are attained by applying homotopy analysis method.

Trends of different parameters on concentration, velocity and temperature are shown graphically. Skin friction coefficient and local Nusselt number are calculated and investigated under the effect of elaborated parameters. An elevation in the value of magnetic field parameter causes collapse in the velocity distributions. Velocity distribution in increasing function of viscoelastic parameter. Temperature and concentration profiles are decreasing functions of viscoelastic parameter. Concentration distribution reduces by increasing the chemical reaction parameter. There is more surface drag force for larger M, while opposite behavior is noted for β.

To the best of the authors’ knowledge, such consideration is yet to be published in the literature.

The purpose of this paper is to address the entropy analysis of the 3D flow of Maxwell nanofluid containing gyrotactic microorganism in the presence of homogeneous–heterogeneous reactions with improved heat conduction and mass diffusion models over a stretched surface. Improved models are supported out by utilizing Cattaneo–Christov heat flux and generalized Fick’s law, respectively.

Governing equations which present the given flow phenomenon are modeled in the form of PDEs by applying boundary layer analysis and then suitable makeovers are engaged to transfigure prevailing partial differential equations into a set of ordinary differential equations. Transformed equations are handled via optimal homotopy analysis process in computational tool Mathematica and also a special case of already published work is substantiated and found to be in excellent settlement.

The bearing of innumerable convoluted physical parameters on velocity, temperature, concentration, reaction rate, the concentration of motile microorganism and entropy generation are presented and deliberated through graphs. Moreover, the convergence of the homotopic solution is presented in tabular form which confirms the reliability of the proposed scheme. It is perceived that mounting values of the magnetic parameter and Brinkman number boosts the irreversibility analysis and Bejan number diminishes for these parameters. Moreover, the growing values of Prandtl and Schmidt numbers reduce the temperature and concentration fields, respectively.

The work contained in this paper has applications in a different industry.

The work contained in this paper is original work and it is good for the researcher in the field of applied mathematics.

The purpose of this paper is to theoretically study the problem of the unsteady boundary layer flow past a permeable curved stretching/shrinking surface in the presence of a uniform magnetic field. The governing nonlinear partial differential equations are converted into ordinary differential equations by similarity transformation, which are then solved numerically.

The transformed system of ordinary differential equations was solved using a fourth-order Runge-Kutta integration scheme. Results for the reduced skin friction coefficient and velocity profiles are presented through graphs and tables for several sets of values of the governing parameters. The effects of these parameters on the flow characteristics are thoroughly examined.

Results show that for the both cases of stretching and shrinking surfaces, multiple solutions exist for a certain range of the curvature, mass suction, unsteadiness, stretching/shrinking parameters and magnetic field parameter.

The paper describes how multiple (dual) solutions for the flow reversals are obtained. It is shown that the solutions exist up to a critical value of the shrinking parameter, beyond which the boundary layer separates from the surface and the solution based upon the boundary layer approximations is not possible.

This study aims to investigate the unsteady two-dimensional viscous flow and heat transfer over an unsteady permeable stretching/shrinking sheet (surface) with generalized slip velocity condition.

Similarity transformation is used to reduce the system of partial differential equations into a system of nonlinear ordinary differential equations. The resulting equations are then solved numerically using “bvp4c” function in MATLAB software.

Dual solutions are found for a certain range of the unsteady, suction and stretching/shrinking parameters. Stability analysis is performed, and it is revealed that the first (upper branch) solution is stable and physically realizable, whereas the second (lower branch) solution is unstable.

The results obtained can be used to explain the characteristics and applications of the generalized slip in boundary layer flow. Such condition is applied for particulate fluids such as foams, emulsions, polymer solutions and suspensions. Furthermore, the phenomenon of stretching/shrinking sheet can be found on the manufacturing of polymer sheets, rising and shrinking balloon or moving and shrinking polymer film.

The present numerical results are original and new for the study of unsteady flow and heat transfer over a permeable stretching/shrinking sheet with generalized slip velocity.

This paper aims to assess the effectiveness of Hall currents and power-law slip condition on the hydromagnetic convective flow of an electrically conducting power-law fluid over an exponentially stretching sheet under the effect of a strong variable magnetic field and thermal radiation. Flow formation is developed using the rheological expression of a power-law fluid.

The nonlinear partial differential equations describing the flow are transformed into the nonlinear ordinary differential equations by employing the local similarity transformations and then solved numerically by an effective numerical approach, namely, fourth-order Runge–Kutta integration scheme, along with the shooting iteration technique. The numerical solution is computed for different parameters by using the computational software MATLAB bvp4c. The bvp4c function uses the finite difference code as the default. This method is a fourth-order collocation method. The impacts of thermophysical parameters on velocity and temperature distributions, skin friction coefficients and Nusselt number in the boundary layer regime are exhibited through graphs and tables and deliberated with proper physical justification.

Our investigation conveys that Hall current has an enhancing behavior on velocity profiles and reduces skin friction coefficients. An increase in the power-law index is observed to deplete velocity and temperature evolution. The temperature for the pseudo-plastic (shear-thinning) fluid is relatively higher than the corresponding temperature of the dilatant (shear-thickening) fluid. The streamlines are more distorted and have low intensity near the surface of the sheet for the dilatant fluid than the pseudo-plastic fluid.

The study is pertinent to the expulsion of polymer sheet and photographic films, hydrometallurgical industry, electrically conducting polymer dynamics, magnetic material processing, solutions and melts of polymer processing, purification of molten metals from nonmetallic. The results obtained in this work can be relevant in fluid mechanics and heat transfer applications.

The present problem has, to the authors' knowledge, not communicated thus far in the scientific literature. A comparative study with the published works is conducted to verify the accuracy of the present study. The results obtained in this analysis are significant in providing the standards for validating the accuracies of some numerical or empirical methods.

This paper aims to numerically investigate the two-dimensional unsteady laminar magnetohydrodynamic bioconvection flow and heat transfer of an electrically conducting non-Newtonian Casson thin film with uniform thickness over a horizontal elastic sheet emerging from a slit in the presence of viscous dissipation. The composite effects of variable heat, mass, nanoparticle volume fraction and gyrotactic micro-organism flux are considered as is hydrodynamic (wall) slip. The Buongiorno nanoscale model is deployed which features Brownian motion and thermophoresis effects. The model studies the manufacturing fluid dynamics of smart magnetic bio-nano-polymer coatings.

The coupled non-linear partial differential boundary-layer equations governing the flow, heat and nano-particle and micro-organism mass transfer are reduced to a set of coupled non-dimensional equations using the appropriate transformations and then solved as an nonlinear boundary value problem with the semi-numerical Liao homotopy analysis method (HAM).Validation with a generalized differential quadrature (GDQ) numerical technique is included.

An increase in velocity slip results in a significant decrement in skin friction coefficient and Sherwood number, whereas it generates a substantial enhancement in Nusselt number and motile micro-organism number density. The computations reveal that the bioconvection Schmidt number decreases the micro-organism concentration and boundary-layer thickness which is attributable to a rise in viscous diffusion rate. Increasing bioconvection Péclet number substantially elevates the temperatures in the regime, thermal boundary layer thickness, nanoparticle concentration values and nano-particle species boundary layer thickness. The computations demonstrate the excellent versatility of HAM and GDQ in solving nonlinear multi-physical nano-bioconvection flows in thermal sciences and furthermore are relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.

The numerical study is valid for two-dimensional, unsteady, laminar Casson film flow with nanoparticles over an elastic sheet in presence of variable heat, mass and nanoparticle volume fraction flux. The film has uniform thickness and flow is transpiring from slit which is fixed at origin.

The study has significant applications in the manufacturing dynamics of nano-bio-polymers and the magnetic field control of materials processing systems. Furthermore, it is relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.

The originality of the study is to address the simultaneous effects of unsteady and variable surface fluxes on Casson nanofluid transport of gyrotactic bio-convection thin film over a stretching sheet in the presence of a transverse magnetic field. Validation of HAM with a GDQ numerical technique is included. The present numerical approaches (HAM and GDQ) offer excellent promise in simulating such multi-physical problems of interest in thermal thin film rheological fluid dynamics.

The purpose of present communication is to analyze Darcy–Forchheimer flow of viscous nanofluid by curved stretchable surface. Flow in porous medium is characterized by Darcy–Forchheimer relation. Brownian diffusion and thermophoresis are considered. Convective heat and mass boundary conditions are also used at the curved stretchable surface.

The resulting nonlinear system is solved through shooting technique.

Skin friction coefficient is enhanced for larger porosity parameter and inertia coefficient while reverse trend is noticed for curvature parameter. Local Nusselt number is enhanced for higher Prandtl number and thermal Biot number, whereas the opposite trend is seen via curvature parameter, porosity parameter, inertia coefficient, thermophoresis parameter and Brownian motion parameter. Local Sherwood number is enhanced for Schmidt number, Brownian motion parameter and concentration Biot number, while reverse trend is noticed for curvature parameter, porosity parameter, inertia coefficient and thermophoresis parameter.

To the best of author’s knowledge, no such consideration has been given in the literature yet.