Search results

The purpose of this paper is to investigate numerically the unsteady MHD Couette flow and heat transfer of viscous, incompressible and electrically conducting nanofluids between two parallel plates in a rotating channel.

The nanofluid is set in motion by the combined action of moving upper plate, Coriolis force and the constant pressure gradient. The channel rotates in unison about an axis normal to the plates. The nonlinear governing equations for velocity and heat transfer are obtained and solved numerically using semi-discretization, shooting and collocation (bvp4c) techniques together with Runge-Kutta Fehlberg integration scheme.

Results show that both magnetic field and rotation rate demonstrate significant effect on velocity and heat transfer profiles in the system with Cu-water nanofluid demonstrating the highest velocity and heat transfer efficiency. These numerical results are in excellent agreements with the results obtained by other methods.

This paper provides a very useful source of information for researchers on the subject of hydromagnetic nanofluid flow in rotating systems.

Couette flow of nanofluid in the presence of applied magnetic field in a rotating channel is investigated.

The purpose of this paper is to investigate the unsteady magnetohydrodynamic (MHD) Couette flow of an electrically conducting incompressible non-Newtonian third grade reactive fluid with temperature-dependent variable viscosity and thermal conductivity properties under isothermal surface conditions.

The coupled non-linear partial differential equations for momentum and energy balance governing the transient problem are obtained and tackled numerically using a semi-discretization finite difference technique.

The effects of various embedded thermophysical parameters on the velocity and temperature fields including skin friction, Nusselt number and thermal stability conditions are presented graphically and discussed quantitatively.

The approach is applicable to modelling the complex physical phenomenon in MHD lubrications that occurs in numerous areas of engineering and industrial processes.

This paper may be of industrial and engineering interest especially in understanding the combined effects of unsteadiness, variable thermophysical properties and magnetic field on the thermal stability condition for a reactive non-Newtonian third grade fluid under Couette flow scenario.

Pressure-based methods have been demonstrated to be powerful for solving many practical problems in engineering. In many pressure-based methods, inner iterative processes are proposed to get efficient solutions. However, the number of inner iterations is set empirically and kept fixed during the whole computation for different problems, which is overestimated in some computations but underestimated in other computations. This paper aims to develop an algorithm with adaptive inner iteration processes for steady and unsteady incompressible flows.

In this work, with the use of two different criteria in two inner iterative processes, a mechanism is proposed to control inner iteration processes to make the number of inner iterations vary during computing according to different problems. By doing so, adaptive inner iteration processes can be achieved.

The adaptive inner iterative algorithm is verified to be valid by solving classic steady and unsteady incompressible problems. Results show that the adaptive inner iteration algorithm works more efficient than the fixed inner iteration one.

The algorithm with adaptive inner iteration processes is first proposed in this paper. As the mechanism for controlling inner iteration processes is based on physical meaning and the feature of iterative calculations, it can be used in any methods where there exist inner iteration processes. It is not limited for incompressible flows. The performance of the adaptive inner iteration processes in compressible flows is conducted in a further study.

This study aims to investigate the effect of externally applied magnetic force and heat transfer with a heat source/sink on the Couette flow with viscous dissipation in a horizontal rotating channel. The magnetic force is added to the governing equations. The effects of fluid flow parameters are observed under the applied magnetic force. In this system, the magnetic force is applied perpendicular to the plane of the fluid flow. In recent years, the magnetic field has renewed interest in aerospace technology. The physical and theoretical approach in the multidisciplinary field of magneto fluid dynamics (MFD) is applied in the field of aerospace vehicle design.

Authors use the perturbation method to solve and find the approximate solutions of differential equations. First, convert the partial differential equation to ordinary differential equation and calculate the approximate solutions in two cases. The first solution got by assuming heat generating in the fluid and the second one got when heat absorbing. After applying the external magnetic force, the effects of various fluid parameters velocity, temperature, skin friction coefficient and Nusselt number are found and discussed using tables and graphs.

It is found that the velocity of the fluid has decreased tendency when the rotation of the fluid and magnetic force on the fluid increases. The temperature of the fluid, Prandtl value and Eckert number increased when the heat source generated heat. When heat absorbs the heat, sink parameter increases and the temperature of the fluid decreases. Also, while heat absorbs, the temperature increases when the Prandtl value and Eckert number increase.

The skin friction coefficient on the surface increases, when the rotation parameter and the magnetic force parameter of the fluid increase. In the case of heat generating, the Nusselt number increased, while the Eckert number and Prandtl numbers increased. Also, the Nusselt number has larger values when the heat source parameter has near the constant temperature, and it has smaller values when the temperature varies. In the case of heat-absorbing, the Nusselt number decreased when the Eckert and Prandtl numbers increased. Also, the Nusselt number varies up and down while the heat absorbing parameter increases.

This report offers the detailed investigation of Couette–Poiseuille flow of nanoliquid with varying viscosity. The analysis is carried out by considering flow between two parallel plates in a rotating permeable channel with the aid of nonlinear thermal radiation and Hall effect. The predominant equations governing the physical phenomenon are demonstrated using the Buongiorno model.

Numerical computation for the demonstrated physical problem is achieved through the implementation of the Runge–Kutta–Fehlberg fourth–fifth-order method along with shooting technique.

The theoretical view of Brownian motion, nonlinear radiation, Hall effect and thermophoresis parameter is presented graphically.

It is revealed that flow velocity increases with the upper wall motion parameter and magnetic field. Also, it is established that an increase in the Nusselt number is achieved for increasing values of nonlinear radiation parameter.

The purpose of this paper is to develop and correct the problem studied by Makinde and Mhone (2005) to a rotating vertical porous channel immersed in a Darcian porous regime in presence of a strong transverse magnetic filled and with the application of thermal radiation. In this investigation, the fluid is considered to be of viscous, electrically conducting, Newtonian and radiating and is optically thin with a relatively low density. Excellent agreement is obtained for exact solutions with those of previously published works.

In this investigation, a closed form analytical method based on the complex notations for the velocity, temperature and the pressure is developed to solve the governing coupled, non-linear partial differential equations. The accuracy and effectiveness of the method are demonstrated.

Interestingly observed that, the Lorentizian body force is not act as a drag force as in conventional MHD flows, but as an aiding body force and this will serve to accelerate the flow and boost the primary velocities. Due to the large rotation of the channel, the primary velocities are become flattered and shift towards the walls of the channel. With a rise in Darcian drag force, flow velocity and shear stress are found to reduce. Moreover, increasing thermal radiation and rotation of the channel strongly depress the shear stress, and maximum flow reversal, i.e. back flow is observed due to large Darcian resistance, thermal radiation and rotation.

The analysis is valid for unsteady, two-dimensional laminar flow of an optically thick no-gray gas, electrically conducting, and Newtonian fluid past an isothermal vertical surface adjacent to the Darcian regime with variable surface temperature. An extension to three-dimensional flow case is left for future work.

Practical interest of such study includes applications in magnetic control of molten iron flow in the steel industry, liquid metal cooling in nuclear reactors, magnetic suppression of molten semi-conducting materials and meteorology and in many branches of engineering and science. It is well known that the effect of thermal radiation is important in space technology and high-temperature processes. Thermal radiation also plays an important role in controlling heat transfer process in polymer processing industry.

The paper presents useful conclusions with the help of graphical results obtained from studying exact solutions based on complex notations for Darcian drag force, rotation of the channel and conduction-radiation heat transfer interaction by unsteady rotational flow in a vertical porous channel embedded in a Darcian porous regime under the application hydromagnetic force. The results of this study may be of interest to engineers for heat transfer augmentation and drag reduction in heat exchangers as well as MHD boundary layer control of re-entry vehicles, etc.

The purpose of this paper is to deal with an unsteady natural convection flow of a rotating fluid past an exponential accelerated vertical plate. The effect of Hall current, ion-slip and magnetic field is considered. Two types of plate temperature, namely, uniform and ramped temperature are considered to model heat transfer analysis.

The Laplace transform technique is employed to find the closed form solutions for velocity, temperature and concentration.

The effects of flow governing parameters on the velocity profile, temperature profile, concentration profile, skin friction, Nusselt and Sherwood numbers are discussed and presented through graphs and tables. It is found that fluid velocity in the primary flow direction decreases with the increase in the magnetic parameter.

First time in the literature, the authors obtained closed form solution to natural convection flow of a rotating fluid past an exponential accelerated vertical plate.

This study aims to investigate the flow behavior of aluminum oxide–water nanofluid with variable viscosity flowing through the microchannel parallel with the ground, with low aspect ratio. The study focuses on the first and second law analyses of Poiseuille flow using water as the base fluid with alumina nanoparticles suspended in it. Combined effects of thermal radiation, viscous dissipation, variable viscosity, nanoparticle shape factor and volume fraction on the thermal performance are studied and the in-built irreversibility in the process is examined.

The governing equations with dimensions are reduced to non-dimensional equations by using dimensionless quantities. Then, the Runge–Kutta–Fehlberg shooting scheme tackles the present non-linear equations.

The outcomes of the present analysis reveal that the activation energy parameter with its increase, depletes the exergetic effectiveness of the system, thus defending the fact to keep the activation energy parameter the lowest as possible for the system efficiency. In addition, thermal radiation and Biot number enhance the release of heat energy, thereby cooling the system. Bejan number graph exhibits the decreasing behavior for the increased nanoparticle shape factor, whereas the temperature enhances with the rise in nanoparticle shape factor.

The effects of nanoparticle shape factor in Poiseuille flow for alumina–water nanoliquid in low aspect ratio microchannel is inspected at the earliest. Exergetic effectiveness of the system is studied and heat transfer characteristics are explored for thermal radiation effect and activation energy parameter. Besides, BeηSphere>BeηBlades.

The purpose of this paper is to examine the Sisko fluid model over a stretching cylinder with heat transfer and magnetohydrodynamics.

The boundary layer approach is employed to simplify the governing equations. Suitable similarity transformations are used to transform the governing partial differential equations into ordinary differential equations. In order to solve this system of ordinary differential equations numerically, shooting method in conjunction with Runge-Kutta-Fehlberg method is used.

The effects of physical parameters involved in velocity and temperature profiles are shown through graphs. It is observed that Sisko fluid parameter and curvature parameter enhances fluid velocity while motion of fluid is retarded by increasing magnetic field strength. Additionally temperature of fluid raise with curvature parameter while it fall down for larger values of Prandtl number. Skin friction coefficient and Nusselt number are computed and presented in graphs and tables for further analysis. It can be seen that curvature parameter increases both skin friction and Nusselt number while magnetic field and Prandtl number decayed skin friction and Nusselt number, respectively. Also Sisko parameter enlarges skin friction coefficient. The accuracy of solution is verified by comparing it with existing literature.

The computed results are interested for industrial and engineering processes, especially in cooling of nuclear reactors.

Joule heating effect is a pervasive phenomenon in electro-osmotic flow because of the applied electric field and fluid electrical resistivity across the microchannels. Its effect in electro-osmotic flow field is an important mechanism to control the flow inside the microchannels and it includes numerous applications.

This research article details the numerical investigation on alterations in the profile of stream wise velocity of simple Couette-electroosmotic flow and pressure driven electro-osmotic Couette flow by the dynamic viscosity variations happened due to the Joule heating effect throughout the dielectric fluid usually observed in various microfluidic devices.

The advantages of the Joule heating effect are not only to control the velocity in microchannels but also to act as an active method to enhance the mixing efficiency. The results of numerical investigations reveal that the thermal field due to Joule heating effect causes considerable variation of dynamic viscosity across the microchannel to initiate a shear flow when EDL (Electrical Double Layer) thickness is increased and is being varied across the channel.

This research work suggest how joule heating can be used as en effective mechanism for flow control in microfluidic devices.