Search results

Industry 4.0 is assumed to yield extensive industry-spanning opportunities. However, exploiting these opportunities requires a targeted implementation of Industry 4.0. The purpose of this paper is to generate a deeper understanding of relevant implementation action. Existing recommendations are mostly general, highly aggregated and difficult to grasp. Yet, specific and concrete actions that need to be taken to accelerate the realization of Industry 4.0 are essential.

The article uses 13 semi-structured in-depth expert interviews as the source of empirical data. The interviews were conducted with managers from Industry 4.0-experienced German manufacturing companies. All interviews are analyzed using qualitative content analysis.

The study reveals relevant and targeted aspects for Industry 4.0 implementation: the development of Industry 4.0-specific know-how, securing financial resources, integrating employees into the implementation process and establishing an open-minded and flexible corporate culture. Further aspects include comprehensive planning processes, cooperation with external partners, proper handling of data interfaces, interdisciplinary communication, an adaptable organizational structure and data security.

The paper is limited to German manufacturing enterprises and should be transferred to other industries and countries.

The study supports managers to effectively implement Industry 4.0 within their organizations and consequently benefit from Industry 4.0 and derives recommendations for future research.

The paper is among the first to give specific and concrete examples for lessons learned from Industry 4.0 implementation, directly obtained from industrial application.

The paper targets on providing new experimental data for validation of the well-established mathematical models within the framework of the lattice Boltzmann method (LBM), which are applied to problems of casting processes in complex mould cavities.

An experimental campaign aiming at the free-surface flow within a system of narrow channels is designed and executed under well-controlled laboratory conditions. An in-house lattice Boltzmann solver is implemented. Its algorithm is described in detail and its performance is tested thoroughly using both the newly recorded experimental data and well-known analytical benchmark tests.

The benchmark tests prove the ability of the implemented algorithm to provide a reliable solution when the surface tension effects become dominant. The convergence of the implemented method is assessed. The two new experimentally studied problems are resolved well by simulations using a coarse computational grid.

A detailed set of original experimental data for validation of computational schemes for simulations of free-surface gravity-driven flow within a system of narrow channels is presented.

The purpose of this paper is to investigate the heat and mass transport characteristics in microchannel reactors with non-uniform catalyst distributions.

A two-dimensional model is developed to study the heat and mass transport characteristics in microchannel reactors. The heat and mass transport processes in the microchannel reactors with non-uniform catalyst distribution in the catalytic combustion channel are also studied.

The simulated results are compared in terms of the distributions of species mole fraction, temperature and reaction rate for the conventional and new designed reactors. It is found that the chemical reaction, heat and mass transport processes are significantly affected and the maximum temperature in the reactor is also greatly reduced when a non-uniform catalyst distribution is applied in the combustion catalyst layer.

This study can improve the understanding of the transportation characteristics in microchannel reactors with non-uniform catalyst distributions and provide guidance for the design of microchannel reactors.

The design of microchannel reactors with non-uniform catalyst distributions can be used in methane steam reforming to reduce the maximum temperature inside the reactor.

We consider, as discretization in space, the nonconforming mesh developed in SUSHI (Scheme Using Stabilization and Hybrid Interfaces) developed in Eymard et al. (2010) for a semi-linear heat equation. The time discretization is performed using a uniform mesh. We are concerned with a nonlinear scheme that has been studied in Bradji (2016) in the context of the general framework GDM (Gradient Discretization Method) (Droniou et al., 2018) which includes SUSHI. We provide sufficient conditions on the size of the spatial mesh and the time step which allow to prove a W1,∞(L2)-error estimate. This error estimate can be viewed as an improvement for the W1,2(L2)-error estimate proved in Bradji (2016). The W1,∞(L2)-error estimate we want to prove in this note was stated without proof in Bradji (2016, Remark 7.2, Page 1302). Its proof is based on a comparison with an appropriately chosen auxiliary finite volume scheme along with the derivation of some new estimates on its solution.

This paper aims to critically investigate the past hype of internationalization of higher education institutions (HEIs) and its complex international, national and local processes under the influence of globalization.

In particular, the authors employed the knowledge–policy–power interface framework through a scoping review in order to reexamine the political dynamics among international, national and local higher education actors in driving the internationalization of HEIs in the context of South Korea between the 1990s and the 2020s. The perspective taken by this research brings much-needed nuance to the analysis by focusing on the complex dynamics of external factors and key actors and their responses in the process of internationalization.

This research found three characteristic dynamics of internationalization of Korean HEIs: uncritical acceptance of external pressures for internationalization; unbalanced formal and informal participation at the national level and different ways HEIs absorb change. In short, this research discussed how the powerful government, which has been stirred by external forces, shaped the limited knowledge discourse on internationalization while triggering power games among various HEIs. The research highlights that the characteristics of HEIs and the voices of all stakeholders should be better accounted for so that internationalization can proceed in diverse ways from the ground up to enhance and assure educational quality.

The research limits itself by analyzing the political dynamics in driving the internationalization of HEIs in the context of South Korea only through scoping review. However, the attempt to disentangle the underlying political dynamics through its original framework is worthy unlike previous more traditional models that cast policy-making as a uniform cycle proceeding rationally through the policy process regardless of the issue.

These findings enable a better analysis of the key dynamics of how HEI internationalization policies in Korea were understood, planned and implemented. Without examining the political dynamics among various factors as well as the responses of significant actors to HEI internationalization, the current challenges and remaining tasks in translating higher education policy into practice cannot be thoroughly assessed.

Most importantly, the multilayered political dynamics that come together to shape the content and directions of policies in a certain national context should be taken into account in the process of policy-making. Such recontextualization would provide a better understanding of the underlying dynamics that lead to certain consequences of and challenges in translating higher education policy into practice, especially for those who face the challenge of balancing between state-driven policies and ever-diversifying needs and demands of HEIs.

As there is a lack of understanding of the critical context of the knowledge–policy–power interface despite the significant influence of political dynamics in the process of internationalization, this research reexamined the internationalization of HEIs in Korea by providing a better understanding of the political dynamics between knowledge and power that influence the directions and contents of policy dialogues and documents.

The individual levels involved in real estate management are thoroughly discussed in the literature. This paper provides a structured meta-analysis of the different theoretical approaches in German-speaking countries. It also investigates the integration of transaction management and technical due diligence into the concepts of organisation theory. In this process, the interfaces are analysed and optimised models are developed for transferring the technical due diligence findings to the operational level.

Interviews with transaction management experts were conducted based on a narrative literature review. These interviews shed light on how the components of transaction management and due diligence are integrated into the transaction process, with a particular focus on technical due diligence. They also provide insights into how the related results are taken into account in relation to the transaction, and how they are transferred into the operational phase.

It becomes apparent that the role of transaction management is not clearly defined and delimited in the structural model of the real estate industry. Technical due diligence findings are usually transferred to the operation of the property via several, manual interfaces with corresponding losses of knowledge. The related models derived and developed for the purpose of operational optimisation define the role of transaction management against a technical background and identify the interfaces to be considered.

The significance of transaction management for subsequent operations is discussed and elaborated on. More specifically, transferring safety-relevant, high-priority findings from the technical due diligence exercise plays a crucial role for the modelling stage. On the implementation level, the derived models serve as a basis for customising the internal organisational structure.

In Germany, there has hardly been any research into the involvement of technical experts in the real estate transaction process to date. This paper provides initial approaches to optimising organisational structures and sustainably integrating technical due diligence findings into real estate operations.

Connected vehicle-based variable speed limit (CV-VSL) systems in fog area use multi-source detection data to indicate drivers to make uniform change in speed when low visibility conditions suddenly occur. The purpose of the speed limit is to make the driver's driving behavior more consistent, so as to improve traffic safety and relieve traffic congestion. The on-road dynamic message sign (DMS) and on-board human–machine interface (HMI) are two types of warning technologies for CV-VSL systems. This study aims to analyze drivers’ acceptance of the two types of warning technologies in fog area and its influencing factors.

This study developed DMS and on-board HMI for the CV-VSL system in fog area on a driving simulator. The DMS and on-board HMI provided the driver with weather and speed limit information. In all, 38 participants participated in the experiment and completed questionnaires on drivers’ basic information, perceived usefulness and ease of use of the CV-VSL systems. Technology acceptance model (TAM) was developed to evaluate the drivers’ acceptance of CV-VSL systems. A variance analysis method was used to study the influencing factors of drivers’ acceptance including drivers’ characteristics, technology types and fog density.

The results showed that drivers’ acceptance of on-road DMS was significantly higher than that of on-board HMI. The fog density had no significant effect on drivers’ acceptance of on-road DMS or on-board HMI. Drivers’ gender, age, driving year and driving personality were associated with the acceptance of the two CV-VSL technologies differently. This study is beneficial to the functional improvement of on-road DMS, on-board HMI and their market prospects.

Previous studies have been conducted to evaluate the effectiveness of CV-VSL systems. However, there were rare studies focused on the drivers’ attitude toward using which was also called as acceptance of the CV-VSL systems. Therefore, this research calculated the drivers’ acceptance of two normally used CV-VSL systems including on-road DMS and on-board HMI using TAM. Furthermore, variance analysis was conducted to explore whether the factors such as drivers’ characteristics (gender, age, driving year and driving personality), technology types and fog density affected the drivers’ acceptance of the CV-VSL systems.

This paper aims to describe the control software of a novel manufacturing system called plasma-assisted bio-extrusion system (PABS), designed to produce complex multi-material and functionally graded scaffolds for tissue engineering applications. This fabrication system combines multiple pressure-assisted and screw-assisted printing heads and plasma jets. Control software allows the users to create single or multi-material constructs with uniform pore size or pore size gradients by changing the operation parameters, such as geometric parameters, lay-down pattern, filament distance, feed rate and layer thickness, and to produce functional graded scaffolds with different layer-by-layer coating/surface modification strategies by using the plasma modification system.

MATLAB GUI is used to develop the software, including the design of the user interface and the implementation of all mathematical programing for both multi-extrusion and plasma modification systems.

Based on the user definition, G programing codes are generated, enabling full integration and synchronization with the hardware of PABS. Single, multi-material and functionally graded scaffolds can be obtained by manipulating different materials, scaffold designs and processing parameters. The software is easy to use, allowing the efficient control of the PABS even for the fabrication of complex scaffolds.

This paper introduces a novel additive manufacturing system for tissue engineering applications describing in detail the software developed to control the system. This new fabrication system represents a step forward regarding the current state-of-the-art technology in the field of biomanufacturing, enabling the design and fabrication of more effective scaffolds matching the mechanical and surface characteristics of the surrounding tissue and enabling the incorporation of high number of cells uniformly distributed and the introduction of multiple cell types with positional specificity.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

The rostrum of a paddlefish provides hydrodynamic stability during feeding process in addition to detect the food using receptors that are randomly distributed in the rostrum. The exterior tissue of the rostrum covers the cartilage that surrounds the bones forming interlocking star shaped bones.

The aim of this work is to assess the mechanical behavior of four finite element models varying the type of formulation as follows: linear-reduced integration, linear-full integration, quadratic-reduced integration and quadratic-full integration. The paper also presents the load transfer mechanisms of the bone structure of the rostrum. The base material used in the study was steel with elastic–plastic behavior as a homogeneous material before applying materials properties that represents the behavior of bones, cartilages and tissues.

Conclusions are based on comparison among the four models. There is no significant difference between integration orders for similar type of elements. Quadratic-reduced integration formulation resulted in lower structural stiffness compared with linear formulation as seen by higher displacements and stresses than using linearly formulated elements. It is concluded that second-order elements with reduced integration are the alternative to analyze biological structures as they can better adapt to the complex natural contours and can model accurately stress concentrations and distributions without over stiffening their general response.

The use of advanced computational mechanics techniques to analyze the complex geometry and components of the paddlefish rostrum provides a viable avenue to gain fundamental understanding of the proper finite element formulation needed to successfully obtain the system behavior and hot spot locations.