Search results

This paper aims to propose a new unified and non-ideal switch model for analysis of switching circuits.

The model has a single unified structure that includes all possible states (on, off) of the switches. The analysis with the proposed switch model requires only one topology and uses the single system equation regardless of states of switches. Moreover, to improve accuracy, the model contains the on-state resistance and capacitive effect of switches. The system equations and the states of switches are updated by control variables, used in the model.

There are no restrictions on circuit topology and switch connections. Switches can be internally and externally controlled. The non-ideal nature of the model allows the switch to be modeled more realistically and eliminates the drawbacks of the ideal switch concept. After modeling with the proposed switch model, a linear circuit is obtained. Two examples related to switching circuits are included into the study. The results confirm the accuracy of the model.

This paper contributes a different switch model for analysis of switching converters to the literature. The main advantage of the model is that it has a unified and non-ideal property. With the proposed switch model, the transient events, like voltage spikes and high-frequency noises, caused by inductor and capacitor elements at switching instants can be observed properly.

The purpose of this paper is to propose a unified optimization design method and apply it to handle the brake squeal instability involving various uncertainties in a unified framework.

Fuzzy random variables are taken as equivalent variables of conventional uncertain variables, and a unified response analysis method is first derived based on level-cut technique, Taylor expansion and central difference scheme. Next, a unified reliability analysis method is developed by integrating the unified response analysis and fuzzy possibility theory. Finally, based on the unified reliability analysis method, a unified reliability-based optimization model is established, which is capable of optimizing uncertain responses in a unified way for different uncertainty cases.

The proposed method is extended to perform squeal instability analysis and optimization involving various uncertainties. Numerical examples under eight uncertainty cases are provided and the results demonstrate the effectiveness of the proposed method.

Most of the existing methods of uncertainty analysis and optimization are merely effective in tackling one uncertainty case. The proposed method is able to handle the uncertain problems involving various types of uncertainties in a unified way.

The purpose of this paper is to whether competition between platforms can be effective, thus leading to efficient allocations.

Based on the classic linear Hoteling model, this paper builds a two-period competition model for two competing platforms using two variants, namely, a discrimination pricing model and a unified pricing model.

In the case of the discrimination pricing model, the competition is moderate, and the two platforms split the market evenly in the first stage, while both platforms tended to offer preferential treatment to new users and set higher prices for regular customers in the second stage. Compared to the unified pricing model, in the first stage, the platform can provide a higher price that depends on the cross-network effect when it implements discrimination, and thus, obtains higher profits. However, in the second stage, fierce competition leads to the release of benefits, new and regular customers obtain lower prices and the platforms lose higher profits. In the long-run, discriminatory pricing is not the best option due to lower total profits. The two platforms will implement cooperative pricing or one platform becomes dominant.

Instead of focusing on the cross-network effects, this paper emphasizes the role of the same-side network effect on price discrimination regarding the platforms’ competition. The same-side network effects are investigated in relation to a discrimination pricing strategy and compared to a unified pricing strategy. Another innovative aspect is the study of these network effects in a dynamic setting based on a two-period competition model for two platforms.

Because of the various geometric descriptions of different bearing types, performance calculation of journal bearing is complicated, and is difficult in traditional model. This paper aims to simplify the calculation of the journal bearing performance, and to reduce the workload.

On the basis of previous research, a general performance calculation model of journal bearing is proposed in this paper. Eccentricity ratio and attitude angle of axis to each pad are calculated by coordinates of spindle center and each pad center by establishing the unified coordinate system. The surface deformation of journal bearing is taken into consideration, and a correction value is added to the dimensionless oil film thickness.

The performance calculation results of various fix-pad and tilting-pad journal bearings match the results of the existing references very well, revealing the validity of the model. The general model can greatly reduce programming workload, and increase adaptability to different bearings.

Geometric descriptions of both fix-pad and tilting-pad journal bearings are unified in this model, which can be applied to both standard and non-standard journal bearings with different preload ratios. In addition, due to the unification of different bearings types, this model is more conducive to performance comparison among different bearing types, and promotes the development of new structural forms for journal bearings.

Blockchain can track the material from the manufacturer to the end customers. Therefore, it can ensure the product's authenticity, transparency and trust in the retail supply chain (SC). There is a need to trace and track the retail products before it reaches the customers to check the quality of the products so that expired products can be recycled and reused, which in turn will help gain customers' trust. This research aims to investigate retail employees' behavioural intention to adopt blockchain in the retail SC.

To examine the behavioural intention of employees in the retail SC, the research uses three theories – the technology acceptance model; the unified theory of acceptance and use of technology; and the theory of planned behaviour. The technology acceptance model measures the employee's acceptance of blockchain in the retail SC. The unified theory of acceptance is used in this research to measure how blockchain adoption will improve the performance of the employees. The theory of planned behaviour is used in this research to measure whether the employees intend to adopt blockchain. A survey was carried out in the retail stores of India. Exploratory factor analysis and structural equation modelling were used for data analysis.

This study found that the employees of the retail stores have a positive intention and attitude to adopt blockchain technology. Further, it was found that perceived behavioural control and effort expectancy was not promoting blockchain adoption in the retail sector.

This study will help the retail stores' employees understand the blockchain in their operations and will motivate the top management of the retail companies to adopt this technology. The study is limited to the retail SC in India only.

This study uses three theories technology acceptance model; the unified theory of acceptance and use of technology; and the theory of planned behaviour, which were not used in earlier studies of blockchain adoption in the retail SC.

A description of the finite element implementation of Robinson's unified viscoplastic model into the general purpose finite element program, MARC, is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. Excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

The purpose of this paper is to propose a novel mathematical model to present the three-dimensional tolerance of a discrete surface and to carry out an approach to analyze the tolerance of an assembly with a discrete surface structure. A discrete surface is a special structure of a large surface base with several discrete elements mounted on it, one, which is widely used in complex electromechanical products.

The geometric features of discrete surfaces are separated and characterized by small displacement torsors according to the spatial relationship of discrete elements. The torsor cluster model is established to characterize the integral feature variation of a discrete surface by integrating the torsor model. The influence and accumulation of the assembly tolerance of a discrete surface are determined by statistical tolerance analysis based on the unified Jacobian-Torsor method.

The effectiveness and superiority of the proposed model in comprehensive tolerance characterization of discrete surfaces are successfully demonstrated by a case study of a phased array antenna. The tolerance is evidently and intuitively computed and expressed based on the torsor cluster model.

The tolerance analysis method proposed requires much time and high computing performance for the calculation of the statistical simulation.

The torsor cluster model achieves the three-dimensional tolerance representation of the discrete surface. The tolerance analysis method based on this model predicts the accumulation of the tolerance of components before their physical assembly.

This paper proposes the torsor cluster as a novel mathematical model to interpret the tolerance of a discrete surface.

This paper aims to propose a novel methodology for optimal voltage source converter (VSC) station installation in hybrid alternating current (AC)/direct current (DC) transmission networks.

In this analysis, a unified power flow model has been developed for the optimal power flow (OPF) problem for VSC-based high voltage direct current (VSC-HVDC) transmission network and solved using a particle swarm optimization (PSO) algorithm. The impact of the HVDC converter under abnormal conditions considering N-1 line outage contingency is analyzed against the congestion relief of the overall transmission network. The average loadability index is used as a severity indicator and minimized along with overall transmission line losses by replacing each AC line with an HVDC line independently.

The developed unified OPF (UOPF) model converged successfully with (PSO) algorithm. The OPF problem has satisfied the defined operational constraints of the power system, and comparative results are obtained for objective function with different HVDC test configurations represented in the paper. In addition, the impact of VSC converter location is determined on objective function value.

A novel methodology has been developed for the optimal installation of the converter station for the point-to-point configuration of HVDC transmission. The developed unified OPF model and methodology for selecting the AC bus for converter installation has effectively reduced congestion in transmission lines under single line outage contingency.

A viscoplastic constitutive model, the Anand model, in which plasticity and creep are unified and described by the same set of flow and evolutionary relations, was applied to represent the inelastic deformation behavior for solder alloys. After conducting creep tests and constant strain rate tests, the material parameters for the Anand model of the Pb‐rich content solder 92.5Pb5Sn2.5Ag were determined from the experimental data using a nonlinear fitting method. The material parameters for 60Sn40Pb, 62Sn36Pb2Ag and 96.5Sn3.5Ag solders were fitted from the conventional model in the literature where plasticity and creep are artificially separated. Model simulations and verifications reveal that there is good agreement between the model predictions and experimental data. Some discussion on this unified model is also presented. This viscoplastic constitutive model for solder alloys possesses some advantages over the separated model. The achieved Anand model has been applied in finite element simulation of stress/strain responses in solder joints for chip component, thin quad flat pack and flip‐chip assembly. The simulation results are in good agreement with the results in the literature. It is concluded that the Anand model could be recommended as a useful material model for solder alloys and can be used in the finite element simulation of solder joint reliability in electronic packaging and surface mount technology.

Organizational capabilities are crucial to achieve the objectives. A plethora of maturity models is available to guide organizational capabilities that create a perplexing situation about what stuff to improve and what to leave. Therefore, a unified maturity model addressing a wide range of capabilities is a necessity. This paper establishes that a flexibility maturity model is an unified model containing the operational, strategic and human capabilities.

This paper does a comparative analysis/benchmarking studies of different maturity models/frameworks widely used in the information technology (IT) sector with respect to the flexibility maturity model to establish its comprehensiveness and application in the organization to handle multiple goals.

This study confirms that the flexibility maturity model has the crucial elements of all the maturity models. If the organizations use the flexibility maturity model, they can avoid the burden of complying with multiple ones and become objective-driven rather than compliance-driven.

The maturity models used in information technology sectors are used. This work will inspire other maturity models to adopt flexibility phenomena.

The comparative analysis will give confidence in application of flexibility framework. The business environment and strategic options across organizations are inherently different that the flexibility maturity model well handles.

A choice is put to an organization to see the comparison tables produced in this paper and choose the right framework according to the prevailing business situation.

This is the first study that makes a conclusion based on comparative benchmarking of existing maturity models.