Search results

1 – 10 of 347
Article
Publication date: 21 January 2022

Omkar Lakshmi Jagan B., Koteswara Rao S. and Kavitha Lakshmi M.

This paper aims to target tracking in the marine environment is typically obtained by considering the measurement parameters like frequency, elevation and bearing. Marine…

Abstract

Purpose

This paper aims to target tracking in the marine environment is typically obtained by considering the measurement parameters like frequency, elevation and bearing. Marine environmental surveillance provides critical information and assistance for the exploitation and maintenance of marine resources.

Design/methodology/approach

With the use of intelligent sensor techniques like Hull-mounted and towed array sensors, convenient, precise and dependable three-dimensional (3D) underwater target tracking is introduced.

Findings

This research investigates a method to develop a reliable Unscented Kalman Filter (UKF) algorithm for enhanced underwater target tracking in a 3D scenario by using bearing, frequency and elevation measurements. In applications for underwater target tracking, uncertainty and inaccuracies are typically described by using Gaussian additive noise.

Originality/value

The proposed UKF algorithm is tested and analyzed using 100 Monte Carlo simulations with the Gaussian generated noise.

Details

International Journal of Pervasive Computing and Communications, vol. 18 no. 3
Type: Research Article
ISSN: 1742-7371

Keywords

Article
Publication date: 13 August 2021

M. Kavitha Lakshmi, S. Koteswara Rao and Kodukula Subrahmanyam

Nowadays advancement in acoustic technology can be explored with marine assets. The purpose of the paper is pervasive computing underwater target tracking has aroused military and…

60

Abstract

Purpose

Nowadays advancement in acoustic technology can be explored with marine assets. The purpose of the paper is pervasive computing underwater target tracking has aroused military and civilian interest as a key component of ocean exploration. While many pervasive techniques are currently found in the literature, there is little published research on the effectiveness of these paradigms in the target tracking context.

Design/methodology/approach

The unscented Kalman filter (UKF) provides good results for bearing and elevation angles only tracking. Detailed methodology and mathematical modeling are carried out and used to analyze the performance of the filter based on the Monte Carlo simulation.

Findings

Due to the intricacy of maritime surroundings, tracking underwater targets using acoustic signals, without knowing the range parameter is difficult. The intention is to find out the solution in terms of standard deviation in a three-dimensional (3D) space.

Originality/value

A new method is found for the acceptance criteria for range, course, speed and pitch based on the standard deviation for bearing and elevation 3D target tracking using the unscented Kalman filter covariance matrix. In the Monte Carlo simulation, several scenarios are used and the results are shown.

Details

International Journal of Intelligent Computing and Cybernetics, vol. 14 no. 4
Type: Research Article
ISSN: 1756-378X

Keywords

Article
Publication date: 23 November 2021

Lakshmi M. Kavitha, Rao S. Koteswara and K. Subrahmanyam

Marine exploration is becoming an important element of pervasive computing underwater target tracking. Many pervasive techniques are found in current literature, but only scant…

Abstract

Purpose

Marine exploration is becoming an important element of pervasive computing underwater target tracking. Many pervasive techniques are found in current literature, but only scant research has been conducted on their effectiveness in target tracking.

Design/methodology/approach

This research paper, introduces a Shifted Rayleigh Filter (SHRF) for three-dimensional (3 D) underwater target tracking. A comparison is drawn between the SHRF and previously proven method Unscented Kalman Filter (UKF).

Findings

SHRF is especially suitable for long-range scenarios to track a target with less solution convergence compared to UKF. In this analysis, the problem of determining the target location and speed from noise corrupted measurements of bearing, elevation by a single moving target is considered. SHRF is generated and its performance is evaluated for the target motion analysis approach.

Originality/value

The proposed filter performs better than UKF, especially for long-range scenarios. Experimental results from Monte Carlo are provided using MATLAB and the enhancements achieved by the SHRF techniques are evident.

Details

International Journal of Pervasive Computing and Communications, vol. 18 no. 3
Type: Research Article
ISSN: 1742-7371

Keywords

Article
Publication date: 4 November 2021

B. Omkar Lakshmi Jagan and S. Koteswara Rao

Doppler-Bearing Tracking (DBT) is commonly used in target tracking applications for the underwater environment using the Hull-Mounted Sensor (HMS). It is an important and…

Abstract

Purpose

Doppler-Bearing Tracking (DBT) is commonly used in target tracking applications for the underwater environment using the Hull-Mounted Sensor (HMS). It is an important and challenging problem in an underwater environment.

Design/methodology/approach

The system nonlinearity in an underwater environment increases due to several reasons such as the type of measurements taken, the speeds of target and observer, environmental conditions, number of sensors considered for measurements and so on. Degrees of nonlinearity (DoNL) for these problems are analyzed using a proposed measure of nonlinearity (MoNL) for state estimation.

Findings

In this research, the authors analyzed MoNL for state estimation and computed the conditional MoNL (normalized) using different filtering algorithms where measurements are obtained from a single sensor array (i.e. HMS). MoNL is implemented to find out the system nonlinearity for different filtering algorithms and identified how much nonlinear the system is, that is, to measure nonlinearity of a problem.

Originality/value

Algorithms are evaluated for various scenarios with different angles on the target bow (ATB) in Monte-Carlo simulation. Computation of root mean squared (RMS) errors in position and velocity is carried out to assess the state estimation accuracy using MATLAB.

Details

International Journal of Intelligent Computing and Cybernetics, vol. 15 no. 3
Type: Research Article
ISSN: 1756-378X

Keywords

Article
Publication date: 14 September 2021

Guduru Naga Divya and Sanagapallea Koteswara Rao

From many decades, bearings-only tracking (BOT) is the interested problem for researchers. This utilises nonlinear filtering methods for state estimation as there is only…

Abstract

Purpose

From many decades, bearings-only tracking (BOT) is the interested problem for researchers. This utilises nonlinear filtering methods for state estimation as there is only information about the target, i.e. bearing is a nonlinear measurement. The measurement bearing is tangentially related to the target state vector. There are many nonlinear filtering algorithms developed so far in the literature.

Design/methodology/approach

In this research work, the recently developed nonlinear filtering algorithm, i.e. shifted Rayleigh filter (SRF), is applied to BOT.

Findings

The SRF is tested for two-dimensional BOT against various scenarios. The simulation results emphasise that the SRF performs well when compared to the standard nonlinear filtering algorithm, unscented Kalman filter (UKF).

Originality/value

SRF utilises the nonlinearities present in the bearing measurement through the use of moment matching. The SRF is able to produce the solution in highly noisy environment, long ranges and high dimension tracking.

Details

International Journal of Intelligent Computing and Cybernetics, vol. 15 no. 1
Type: Research Article
ISSN: 1756-378X

Keywords

Abstract

Details

International Journal of Pervasive Computing and Communications, vol. 18 no. 3
Type: Research Article
ISSN: 1742-7371

Open Access
Article
Publication date: 22 October 2021

Syed Farid Uddin, Ayan Alam Khan, Mohd Wajid, Mahima Singh and Faisal Alam

The purpose of this paper is to show a comparative study of different direction-of-arrival (DOA) estimation techniques, namely, multiple signal classification (MUSIC) algorithm…

1307

Abstract

Purpose

The purpose of this paper is to show a comparative study of different direction-of-arrival (DOA) estimation techniques, namely, multiple signal classification (MUSIC) algorithm, delay-and-sum (DAS) beamforming, support vector regression (SVR), multivariate linear regression (MLR) and multivariate curvilinear regression (MCR).

Design/methodology/approach

The relative delay between the microphone signals is the key attribute for the implementation of any of these techniques. The machine-learning models SVR, MLR and MCR have been trained using correlation coefficient as the feature set. However, MUSIC uses noise subspace of the covariance-matrix of the signals recorded with the microphone, whereas DAS uses the constructive and destructive interference of the microphone signals.

Findings

Variations in root mean square angular error (RMSAE) values are plotted using different DOA estimation techniques at different signal-to-noise-ratio (SNR) values as 10, 14, 18, 22 and 26dB. The RMSAE curve for DAS seems to be smooth as compared to PR1, PR2 and RR but it shows a relatively higher RMSAE at higher SNR. As compared to (DAS, PR1, PR2 and RR), SVR has the lowest RMSAE such that the graph is more suppressed towards the bottom.

Originality/value

DAS has a smooth curve but has higher RMSAE at higher SNR values. All the techniques show a higher RMSAE at the end-fire, i.e. angles near 90°, but comparatively, MUSIC has the lowest RMSAE near the end-fire, supporting the claim that MUSIC outperforms all other algorithms considered.

Article
Publication date: 31 May 2013

Behzad Taheri and Edmond Richer

Autonomous Underwater Vehicles (AUVs) play a crucial role in marine biology research and oceanic natural resources exploration. Since most AUVs are underactuated they require…

Abstract

Purpose

Autonomous Underwater Vehicles (AUVs) play a crucial role in marine biology research and oceanic natural resources exploration. Since most AUVs are underactuated they require sophisticated trajectory planning and tracking algorithms. The purpose of this paper is to develop a new method that allows an underactuated AUV to track a moving object while constraining the approach to a direction tangent to the path of the target. Furthermore, the distance at which the AUV follows the target is constrained, reducing the probability of detection and unwanted behavior change of the target.

Design/methodology/approach

First, a kinematic controller that generates a trajectory tangent to the path of the moving target is designed such that the AUV maintains a prescribed distance and approaches the target from behind. Using a Lyapunov based method the stability of the kinematic controller is proven. Second, a dynamic sliding mode controller is employed to drive the vehicle on the trajectory computed in the first step.

Findings

The kinematic and dynamic controllers are shown to be stable and robust against parameter uncertainty in the dynamic model of the vehicle. Results of numerical simulations for equidistant tracking of a target on both smooth and discontinuous derivatives trajectories for a variety of relative initial positions and orientations are shown.

Originality/value

The contribution of this research is development of a new method for path planning and tracking of moving targets for underactuated AUVs in the horizontal plane. The method allows control of both the direction of approach and the distance from a moving object.

Details

International Journal of Intelligent Computing and Cybernetics, vol. 6 no. 2
Type: Research Article
ISSN: 1756-378X

Keywords

Article
Publication date: 29 September 2023

Yue Qiao, Wang Wei, Yunxiang Li, Shengzui Xu, Lang Wei, Xu Hao and Re Xia

The purpose of this paper is to introduce a motion control method for WFF-AmphiRobot, which can effectively realize the flexible motion of the robot on land, underwater and in the…

146

Abstract

Purpose

The purpose of this paper is to introduce a motion control method for WFF-AmphiRobot, which can effectively realize the flexible motion of the robot on land, underwater and in the transition zone between land and water.

Design/methodology/approach

Based on the dynamics model, the authors selected the appropriate state variables to construct the state space model of the robot and estimated the feedback state of the robot through the maximum a posteriori probability estimation. The nonlinear predictive model controller of the robot is constructed by local linearization of the model to perform closed-loop control on the overall motion of the robot. For the control problem of the terminal trajectory, using the neural rhythmic movement theory in bionics to construct a robot central pattern generator (CPG) for real-time generation of terminal trajectory.

Findings

In this paper, the motion state of WFF-AmphiRobot is estimated, and a model-based overall motion controller for the robot and an end-effector controller based on neural rhythm control are constructed. The effectiveness of the controller and motion control algorithm is verified by simulation and physical prototype motion experiments on land and underwater, and the robot can ideally complete the desired behavior.

Originality/value

The paper designed a controller for WFF-AmphiRobot. First, when constructing the robot state estimator in this paper, the robot dynamics model is introduced as the a priori estimation model, and the error compensation of the a priori model is performed by the method of maximum a posteriori probability estimation, which improves the accuracy of the state estimator. Second, for the underwater oscillation motion characteristics of the flipper, the Hopf oscillator is used as the basis, and the flipper fluctuation equation is modified and improved by the CPG signal is adapted to the flipper oscillation demand. The controller effectively controls the position error and heading angle error within the desired range during the movement of the WFF-AmphiRobot.

Details

Industrial Robot: the international journal of robotics research and application, vol. 50 no. 6
Type: Research Article
ISSN: 0143-991X

Keywords

Article
Publication date: 9 January 2024

Zhuoyu Zhang, Lijia Zhong, Mingwei Lin, Ri Lin and Dejun Li

Docking technology plays a crucial role in enabling long-duration operations of autonomous underwater vehicles (AUVs). Visual positioning solutions alone are susceptible to…

Abstract

Purpose

Docking technology plays a crucial role in enabling long-duration operations of autonomous underwater vehicles (AUVs). Visual positioning solutions alone are susceptible to abnormal drift values due to the challenging underwater optical imaging environment. When an AUV approaches the docking station, the absolute positioning method fails if the AUV captures an insufficient number of tracers. This study aims to to provide a more stable absolute position visual positioning method for underwater terminal visual docking.

Design/methodology/approach

This paper presents a six-degree-of-freedom positioning method for AUV terminal visual docking, which uses lights and triangle codes. The authors use an extended Kalman filter to fuse the visual calculation results with inertial measurement unit data. Moreover, this paper proposes a triangle code recognition and positioning algorithm.

Findings

The authors conducted a simulation experiment to compare the underwater positioning performance of triangle codes, AprilTag and Aruco. The results demonstrate that the implemented triangular code reduces the running time by over 70% compared to the other two codes, and also exhibits a longer recognition distance in turbid environments. Subsequent experiments were carried out in Qingjiang Lake, Hubei Province, China, which further confirmed the effectiveness of the proposed positioning algorithm.

Originality/value

This fusion approach effectively mitigates abnormal drift errors stemming from visual positioning and cumulative errors resulting from inertial navigation. The authors also propose a triangle code recognition and positioning algorithm as a supplementary approach to overcome the limitations of tracer light positioning beacons.

Details

Industrial Robot: the international journal of robotics research and application, vol. 51 no. 2
Type: Research Article
ISSN: 0143-991X

Keywords

1 – 10 of 347