Search results

This paper aims to presents the bandwidth enhancement of a hybrid slot–loop antenna using a modified feed structure.

The conventional monopole feed of the hybrid slot–loop radiator is loaded with a flat microstrip patch to excite higher-order modes. The proposed antenna combines the resonant modes of the slot antenna, the loop antenna and the patch loading.

The antenna exhibits a dual-band response suitable for GSM 1800/1900 and ultrawideband (UWB) standards. The impedance bandwidth extends from 1.65 to 1.95 GHz (11.42 per cent) and 3 to 11.1 GHz (114.9 per cent). The proposed antenna has the smallest footprint with a peak gain of 5.07 dBi at 1.8 GHz and 4.97 dBi at 6 GHz. The prototype antenna is fabricated and the simulation results are validated using experimental measurements. The performance of the bandwidth-enhanced hybrid slot–loop antenna is compared with that of other slot antennas.

Thus, a hybrid slot–loop antenna with an enhanced bandwidth has been reported in this study. The conventional monopole feed of the antenna is replaced with a monopole ending with a microstrip patch load. The antenna covers the operating bands of GSM 1800/1900 and UWB. The proposed antenna has a smaller footprint compared with other wide-slot antennas reported in the literature.

This study aims to design a compact filtering monopole antenna for 5G communication. The design is most suited for various applications within the frequency range of 2.2–3.8 GHz. It offers enhanced bandwidth and reasonable gain with wide-stopband performance.

A low-pass filter (LPF) of complementary split ring resonator (CSRR) with short-circuited stub lines is integrated with a compact defected coplanar waveguide fed truncated circular monopole ultrawideband (UWB) antenna. The reference UWB antenna etched on an FR4 substrate was coupled to the designed LPF to transform the UWB antenna into a wideband antenna. The effect of coupling is analyzed based on the real and imaginary responses of the terminal impedance (ZT) curve. Three short-circuited stub lines of asymmetric lengths are added to the CSRR LPF to suppress harmonics, thereby enhancing the stopband performance and impedance matching between the elements. The proposed filtering antenna is fabricated using a photolithography process, and the corresponding results are measured using a network analyzer (N9951A). The radiation parameters of the proposed filtering monopole antenna are tested in the anechoic chamber. The simulated/measured results are compared and are found in agreement with each other.

The proposed design suppresses 6.5f0 harmonics, resulting in wide stopband performance and increased gain selectivity at the transition edge. A peak suppression of −41 dB and an average suppression of −18 dB were attained throughout the stopband. An operating fractional bandwidth of 54.5%/143% with a peak gain of 3 dBi/5 dBi was obtained. The proposed filtering antenna supports 5G applications such as WiMAX, WLAN, n7, n38 IMT-E, n30 WCS, n40 TDD, n41 TDD, n48 TDD, n78 TDD and n90 TDD.

The proposed design is novel and compact and has a wide application in 5G communication. With the filter, the antenna operates in wideband, and without the filter, it operates in UWB. Besides, it offers enhanced stopband performance with high gain selectivity at the transition edge. Comparatively, a 50% improvement in bandwidth, 52% improvement in size reduction and 33% improvement in harmonic suppression are attained.

The purpose of this paper is to create an assembly verification system that is capable of verifying complete assembly and torque for each individual fastener.

The 3D position of the tool used to torque the fastener and the assembly pallet will be tracked using an infrared (IR) tracking system. A set of retro‐reflective markers are attached to the tool and assembly while being tracked by multiple IR cameras. Software is used to triangulate the relative position of the tool in order to identify the fastener being torqued. The torque value is obtained from the tool controller device. By combining the location of the tool and the torque value from the tool controller, assembly of each individual fastener can be verified and its achieved torque recorded.

The IR tracking is capable of tracking within 2‐3 mm for each tracking ball, with a resulting practical resolution of 24 mm distance between fasteners while maintaining 99.9999 per cent reliability without false positive fastener identification.

This experiment was run under simulated assembly line lighting conditions.

By being able to verify assembly reliably, the need for manual torque check is eliminate and hence yield significant cost savings. This will also allow programming electric tools according in real time based on the fastener in proximity identification.

Currently, assembly verification is only done using the torque values. In automated assembly line, each process might involve fastening multiple fasteners. Using this system, a new level of assembly verification is achieved by recording the assembled fastener and its associated torque.

The purpose of this paper is to provide a historical account of the May 1985 spread spectrum FCC decision.

The paper presents a case study giving a first‐person account of decision making at the FCC in 1985.

The May 1985 decision did not start as an attempt to bring specific products to market, but as part of a program to remove anachronistic technical regulations and allow a free market in innovative technology, subject only to responsible interference limits.

Research limitations encompass typical limitations of a narrow case study of a historical event.

The paper guides future decision making in telecommunications policy.

The paper reflects the path of deregulation in the 1980s resulting in widespread product innovation in the twenty‐first century.

This paper aims to introduce the weighted squared Euclidean distance between points in signal space, to improve the performance of the Wi-Fi indoor positioning. Nowadays, the received signal strength-based Wi-Fi indoor positioning, a low-cost indoor positioning approach, has attracted a significant attention from both academia and industry.

The local principal gradient direction is introduced and used to define the weighting function and an average algorithm based on k-means algorithm is used to estimate the local principal gradient direction of each access point. Then, correlation distance is used in the new method to find the k nearest calibration points. The weighted squared Euclidean distance between the nearest calibration point and target point is calculated and used to estimate the position of target point.

Experiments are conducted and the results indicate that the proposed Wi-Fi indoor positioning approach considerably outperforms the weighted k nearest neighbor method. The new method also outperforms support vector regression and extreme learning machine algorithms in the absence of sufficient fingerprints.

Weighted k nearest neighbor approach, support vector regression algorithm and extreme learning machine algorithm are the three classic strategies for location determination using Wi-Fi fingerprinting. However, weighted k nearest neighbor suffers from dramatic performance degradation in the presence of multipath signal attenuation and environmental changes. More fingerprints are required for support vector regression algorithm to ensure the desirable performance; and labeling Wi-Fi fingerprints is labor-intensive. The performance of extreme learning machine algorithm may not be stable.

The new weighted squared Euclidean distance-based Wi-Fi indoor positioning strategy can improve the performance of Wi-Fi indoor positioning system.

The received signal strength-based effective Wi-Fi indoor positioning system can substitute for global positioning system that does not work indoors. This effective and low-cost positioning approach would be promising for many indoor-based location services.

A novel Wi-Fi indoor positioning strategy based on the weighted squared Euclidean distance is proposed in this paper to improve the performance of the Wi-Fi indoor positioning, and the local principal gradient direction is introduced and used to define the weighting function.

This study aims to propose a computationally efficient framework for multi-objective optimization (MO) of antennas involving nested kriging modeling technology. The technique is demonstrated through a two-objective optimization of a planar Yagi antenna and three-objective design of a compact wideband antenna.

The keystone of the proposed approach is the usage of recently introduced nested kriging modeling for identifying the design space region containing the Pareto front and constructing fast surrogate model for the MO algorithm. Surrogate-assisted design refinement is applied to improve the accuracy of Pareto set determination. Consequently, the Pareto set is obtained cost-efficiently, even though the optimization process uses solely high-fidelity electromagnetic (EM) analysis.

The optimization cost is dramatically reduced for the proposed framework as compared to other state-of-the-art frameworks. The initial Pareto set is identified more precisely (its span is wider and of better quality), which is a result of a considerably smaller domain of the nested kriging model and better predictive power of the surrogate.

The proposed technique can be generalized to accommodate low- and high-fidelity EM simulations in a straightforward manner. The future work will incorporate variable-fidelity simulations to further reduce the cost of the training data acquisition.

The fast MO optimization procedure with the use of the nested kriging modeling technology for approximation of the Pareto set has been proposed and its superiority over state-of-the-art surrogate-assisted procedures has been proved. To the best of the authors’ knowledge, this approach to multi-objective antenna optimization is novel and enables obtaining optimal designs cost-effectively even in relatively high-dimensional spaces (considering typical antenna design setups) within wide parameter ranges.

The purpose of this paper is to investigate the strategies and algorithms for expedited design optimization of microwave and antenna structures in multi-objective setup.

Formulation of the multi-objective design problem-oriented toward execution of the population-based metaheuristic algorithm within the segmented search space is investigated. Described algorithmic framework exploits variable fidelity modeling, physics- and approximation-based representation of the structure and model correction techniques. The considered approach is suitable for handling various problems pertinent to the design of microwave and antenna structures. Numerical case studies are provided demonstrating the feasibility of the segmentation-based framework for the design of real-world structures in setups with two and three objectives.

Formulation of appropriate design problem enables identification of the search space region containing Pareto front, which can be further divided into a set of compartments characterized by small combined volume. Approximation model of each segment can be constructed using a small number of training samples and then optimized, at a negligible computational cost, using population-based metaheuristics. Introduction of segmentation mechanism to multi-objective design framework is important to facilitate low-cost optimization of many-parameter structures represented by numerically expensive computational models. Further reduction of the design cost can be achieved by enforcing equal-volumes of the search space segments.

The study summarizes recent advances in low-cost multi-objective design of microwave and antenna structures. The investigated techniques exceed capabilities of conventional design approaches involving direct evaluation of physics-based models for determination of trade-offs between the design objectives, particularly in terms of reliability and reduction of the computational cost. Studies on the scalability of segmentation mechanism indicate that computational benefits of the approach decrease with the number of search space segments.

The proposed design framework proved useful for the rapid multi-objective design of microwave and antenna structures characterized by complex and multi-parameter topologies, which is extremely challenging when using conventional methods driven by population-based metaheuristics algorithms. To the authors knowledge, this is the first work that summarizes segmentation-based approaches to multi-objective optimization of microwave and antenna components.

This paper aims to state the configuration of the proposed antenna which is competent to many networks such as LTE and X band applications. The experimental study encountered the significance of the proposed antenna.

A novel compact Kuznets curve with parabola-shaped quad-band notched antenna is demonstrated in this paper. The presented prototype is ascertained on a composite material composed of woven fiberglass cloth with an epoxy resin binder. The resulting ultra-wideband antenna ranges 3.1–3.54 GHz, 5.17–5.51 GHz, 5.74–6.43 GHz and 6.79–7.60 GHz. To avoid the frequency bands which cause UWB interference,the projected antenna has been incorporated with slotted patch. The proposed antenna design is attained in four steps. The simple circular patch antenna model with defected ground plane is subjected to stepwise progression by including parabola-shaped slot and U shaped slot on the patch to attain four notched bands.

This projected antenna possesses an optimal bond among simulated and measured outcomes,which is more suitable for the quad notched band applications. Substrate analysis is done by varying substrate material, and notch behavior is presented. The proposed method’s optimum performance in metrics such as return loss, voltage standing wave ratio and radiation pattern varies its frequency range from 2.56 to 7.6 GHz.

The antenna adaptation of the defected ground plane has achieved through the quad notched band with operating frequency ranges 2.56 to 7.6 GHz and with eliminated frequency ranges 3.55–5.16 GHz, 5.52–5.73 GHz, 6.44–6.78 GHz and 7.66–10.6 GHz.

This paper aims to design a most demanding low profile and compact ultra-wide band (UWB) antenna system for various wireless applications. The performance (in terms of data rate) of UWB system is improved by using multiple-input-multiple-output (MIMO) technology with it. Owing to the overlap of other existing licensed bands with that of UWB, electromagnetic signals can interfere. So, notched band UWB MIMO antenna system reported here which is highly compact, bandwidth efficient, superior data rate and high inter-element isolation comparatively to other reported designs.

A 49 × 49 × 1.6 mm³ quad-port UWB MIMO antenna with specific bandwidth elimination property is designed. The proposed planar MIMO configuration comprises unique four identical “Cordate-shaped” monopole radiators fed by 2.3-mm thick microstrip-lines. The radiators are located right-angled to each other to enhance inter-element isolation. Further, a different approach of slitted-substrate is applied to minimize the overall size and mutual coupling of the MIMO antenna, as a substitute of decoupling and matching structures. The defected ground structure is used to obtain −10 dB impedance bandwidth in entire UWB band, without compromising with the lower cut-off frequency response. Further, to eliminate the undesired resonant band (WLAN at 5.5 GHz) from UWB, a rounded split ring resonator is introduced in monopole patch.

In the entire operating band of 2.8 to 11 GHz, isolation among elements is more than 24 dB, envelope correlation coefficient less than 0.002, diversity gain greater than 9.99 dB and TARC less than −7 dB are obtained at all 4-ports.

The measured parameters of the fabricated prototype antenna on FR4 substrate are found in good agreement with the simulated results. The small variation in software results and hardware results are observed due to hardware design limitations.

The proposed design may be used for any wireless application following in the range of UWB.

It can be shown from graphs of measured parameters of the fabricated prototype antenna. They found to be in good agreement with the simulated results.

This paper aims to present the design of a compact vertically polarized four-element UWB antenna suitable for MIMO communications.

The unit cell antenna is constructed using a square ring radiator excited through a stepped impedance feed. The proposed antenna covers the Ultra-wideband (UWB) spectrum ranging from 2.2 to 12.3 GHz. The isolation between the unit cell antennas in the array is enhanced using a simple microstrip line resonator. The decoupling element is connected to the ground through a via.

The proposed scheme offers at least 16 dB improvement in the port-to-port coupling. Furthermore, the four-element antenna array is constructed using a specific interlocking scheme. The proposed antenna array’s Multiple Input Multiple Output (MIMO) performance metrics are analyzed.

By suitably selecting the excitation port, directional radiation patterns can be realized. The combined radiation pattern covers 360 degrees. A prototype antenna array is fabricated, and the simulation results are verified using real-time experiments. The proposed antenna is a suitable candidate for shark fin housing in automotive communications.