Search results

The purpose of this paper is to investigate the effect of materials, three dimensional (3D) structure and number of fabric layers on ultraviolet protection factor (UPF), air permeability and thickness of fabrics.

Total 24 fabrics samples were developed using two 3D structures and two weft materials. In warp direction cotton (CT) yarn and in weft direction polypropylene (PP) and polyester (PET) were used. Air permeability, thickness and UPF testings were performed and relationship among fabric layers, air permeability, thickness and UPF was developed.

UPF and thickness of fabrics increases with number of fabric layers, whereas air permeability decreases with the increase in number of fabric layers. Furthermore, change of multilayer structure from angle interlock to orthogonal interlock having same base weave does not give significant effect on UPF. However, change of material from polyester (PET) to polypropylene (PP) has a dominant effect on UPF. Minimum of three layers of cotton/polyester fabric, without any aid of ultraviolet radiation (UV) resistant coating, are required to achieve good. Cotton/polyester fabrics are more appropriate for outdoor application due to their long-term resistance with sunlight exposure.

Long-term exposure to UV is detrimental. So, there is need of proper selection of material and fabric to achieve ultraviolet protection. 3D fabrics have yarns in X, Y as well as in Z directions which provide better ultraviolet protection as compared to two dimensional (2D) fabrics. In literature, mostly work was done on ultraviolet protection of 2D fabrics and surface coating of fabrics. There is limited work found on UPF of 3D woven fabrics.

This review deals with the pros and cons of ultraviolet (UV) radiation on human beings and the role of textile clothing and the chemicals used for textiles to protect from their harmful effects.

UV radiation (UVR) which has further divided into UVA, UVB, and UVC. Almost 100% of UVC and major portion of UVB are bounced back to stratosphere by ozone layer while UVA enters the earth atmosphere. Excessive exposure of solar or artificial UVR exhibit potential risks to human health. UVR is a major carcinogen and excessive exposure of solar radiation in sunlight can cause cancer in the lip, skin squamous cell, basal cell and cutaneous melanoma, particularly in people with the fair skin.

This article aims to provide a comprehensive overview of the harmful effects of UVR on human skin, factors affecting UV irradiance and factors affecting UV protection offered by textile clothing.

Effect of fiber properties, yarn properties, fabric construction, fabric treatments and laundering has been reviewed along with the identification of gaps in the reported research. A comparison of inorganic and organic UV absorbers has also been given along with different testing and evaluation methods for UV protective clothing.

Lightweight, open construction cotton knitted fabrics generally do not impart good protection from solar ultraviolet radiation (UVR). As lightweight 100% cotton single jersey is highly cherished for summerwear, it is sine qua non to understand the structural parameters that effectively strike a good balance between UV protection and thermophysiological comfort of the wearer. Relatively heavy fabrics protect from UVR, but comfort is compromised because of waning porosity, increase in thickness and thermal insulation. The purpose of this paper is to engineer knits that will bestow maximum UV protection while preserving the thermophysiological comfort of the wearer.

In total, 27 cotton single jersey fabrics with different areal densities and yarn counts were selected. Ultraviolet protection factor (UPF) was calculated based on the work of Imrith (2022). To précis, the authors constructed a UV box to measure the UPF of fabrics, denoted as UPF_B. UPF_B data were correlated with AATCC 183-2004 and yielded high correlation, R² 0.977. It was concluded that UPF 50 corresponds to UPF_B 94.3. Thermal comfort properties were measured on the Alambeta and water-vapour resistance on the Permetest. Linear programming (LP) was used to optimize UPF_B and comfort. Linear optimization focused on maximizing UPF_B while keeping the thermophysiological comfort and areal density as constraints.

The resulting linear geometrical and sensitivity analyses generated multiple technically feasible solutions of fabrics thickness and porosity that gave valid UPF_B, thermal absorptivity and water-vapour and thermal resistance. Subsequently, an interactive optimization software was developed to predict the stitch length, tightness factor and yarn count for optimum UPF_B from a given areal density. The predicted values were then used to knit seven 100% cotton single jersey fabrics and were tested for UV protection. All seven fabrics gave UPF_B above the threshold, that is, higher than 94.3. The mathematical model demonstrated good correlations with the optimized parameters and experimental values.

The optimization software predicted the optimum UPF_B reasonably well, starting from the fabric structural and constructional parameters. In addition, the models were developed as interactive user interfaces, which can be used by knitted fabric developers to engineer cotton knits for maximizing UV protection without compromising thermophysiological comfort. It has been demonstrated that LP is an efficient tool for the optimization and prediction of targeted knitted fabrics parameters.

This study aims to dye silk with natural pigments extract of Coreopsis tinctoria, by treating the fabrics with appropriate mordant under suitable dyeing conditions, to achieve good dyeing depth, fastness and ultraviolet (UV) protection.

Firstly, single factor experiments were used to determine the basic dyeing conditions of Coreopsis tinctoria. The optimal process conditions for direct dyeing were determined through orthogonal experiments. After that, the dyeing with mordant was used. Based on the previously determined optimal process conditions, silk fabrics were dyed with different mordanting methods, with different mordants and mordant dosages. The dyeing results were compared, in terms of the K/S values of the dyed fabrics, to determine the most appropriate dyeing conditions with mordant.

The extract of Coreopsis tinctoria can dye silk fabrics satisfactorily. Good dyeing depth and fastness can be obtained by using suitable dyeing methods and dyeing conditions, especially when using the natural mordant pomegranate rind and the rare earth mordant neodymium oxide. The silk fabrics dyed with Coreopsis tinctoria have good UV resistance, which allows a desirable finishing effect to be achieved while dyeing, using a safe and environmentally friendly method.

The composition of Coreopsis tinctoria is complex, and the specific composition of colouring the silk fibre has not been determined. There are many factors that affect the dyeing experiment, which have an impact on the experimental results.

The results of this study may help expand the application of Coreopsis tinctoria beyond medicine.

To the best of the authors’ knowledge, this paper is the first report on dyeing silk with the extract of Coreopsis tinctoria achieving good dyeing results. Its depth of staining and staining fastness were satisfactory. Optimum dyeing method and dyeing conditions have been identified. The fabric dyed with Coreopsis tinctoria has good UV protection effect, which is conducive to improving the application value of the dyeing fabric. The findings help offer a new direction for the application of medicinal plants in the eco-friendly dyeing of silk.

Synthetic materials have many drawbacks in high-performance garments because they absorb less moisture and cause allergies to sensitive individuals. Cotton materials cannot satisfy all the requirements and cannot provide the required high performance. This study aims to use eco-friendly materials with a common structure to analyse their suitability for high-performance garment application.

This study used two eco-friendly yarns (bamboo, modal and bamboo: modal 50:50) and yarns per needle (two- and four-ply yarns). with a single jersey knit construction and gauge of 7. The physical, mechanical, appearance, comfort, thermal and ultraviolet protection factor (UPF) protection characteristics were evaluated using 15 tests.

The produced knitted fabrics showed high performance for use as garments with physical, mechanical, appearance, comfort, thermal and UPF protection characteristics that were achieved, tested and analysed. The highest-achieved samples with a good UPF (<15) were made from bamboo material, which has other high-performance characteristics such as antibacterial characteristics, a soft surface, thermal insulation and others.

The single jersey structure was used for producing fabrics as it is the common structure in the garment. Also, only gauge 7 was used for its economics and ease of production.

Any change in physical performance of the fibre corresponds to a change in its molecular structure. Basically polyester is hydrophobic in nature due to the absence of attracting polar groups and the dense packing in its polymeric structure. Due to the dense packing in polymeric structure and lack of hydroxyl groups of polyester it does not absorb water hence breathability is poor. The possibility of using air and oxygen plasma treatments for fibre surface activation to facilitate the improvement of hydrophilicity is attempted and has been improved. The purpose of this paper is to study the possibility of engineering the multifunctional of fabrics.

The treated fabric is evaluated through measuring the ultraviolet protection factor, thermal resistance, and antibacterial activity properties. Scanning electron microscopy and transmission electron microscopy graphs show deposition of nano particles (NPs) of Chitosan, TiO₂ and ZnO onto the fibre after washing several times.

Air plasma-nano Chitosan treatment affects positively the antibacterial activity, thermal resistance of the fibre and air plasma-nano TiO₂ and ZnO the fibre protection against ultraviolet rays. Furthermore, the plasma treatment solves an environmental problem which offers safe production process and working place and decreases the unit cost.

The authors are confident that textiles will adopt this technology in the future.

The thermophysiological comfort of fabrics is prerequisite as customers covet adequate moisture, heat management-supported and UV protective clothing that measure up to their levels of activities and environmental conditions. Hitherto, scant tasks have been reported with the purpose of engineering both comfort and UV protection simultaneously. From that vantage point, the objective of this work is to develop a model for optimum UPF, air permeability, water-vapour resistance, thermal resistance, thermal absorptivity and areal density of knitted fabrics.

Weft knitted fabrics of various compositions were investigated. UPF was tested using the Labsphere UV transmittance analyser. The FX 3300 (Textest instruments) air permeability tester was used to test air permeability. Thermal comfort and water-vapour resistance were evaluated using the Alambeta and Permetest instruments, respectively. Based on image processing, the porosity was measured. Fabrics thickness and areal density were measured according to standard methods. Furthermore, parametric and non-parametric statistical test methods were applied to the data for analysis.

Linear regression was substantiated by Kolmogorov-Smirnov test. Then multiple linear regression of porosity and thickness together on UPF and comfort parameters were visually depicted by virtue of 3D linear plots. Residual analysis with quantile-quantile and probability plots, advocated the tests using the Shapiro-Wilk test. The result was validated by comparison with experimental data tested. The samples gave satisfactory relative errors and were supported by the z-test method. All tests indicated failure to reject the null hypothesis.

The predictive models were embedded into an interactive computer program. Fabric thickness and porosity are the inputs needed to run the program. It will predict the optimum UPF, areal density and thermophysiological comfort parameters. In a nutshell, knitters may use the program to determine optimum structural parameters for diverse permutations of UPF and thermophysiological comfort parameters; scilicet high UV protection together with low thermal insulation combined with low water-vapour resistance and high air permeability.

There is a growing demand in the marketplace for textile apparel that offers comfort and protection from the harmful effects of ultraviolet (UV) radiation. The UV rays of the sun when they come into contact with skin lead to all kinds of skin problems. The accumulated effects damage the skin’s DNA and cell function. In addition to skin cancer, excessive sun exposure also causes pre-malignant actinic keratoses, wrinkles, dark and unsightly blotches, leathery skin and prone to destabilizing the immune system. Research has shown that sun (UV) protective clothing is one of the most effective ways to protect against skin cancer. Such fabrics are specifically designed for sun protection by covering a maximum amount of skin and made from a fabric rated for its level of UV protection. Throwing on a sun protective shirt with an ultraviolet protection factor (UPF) of 30+ value is a proactive decision, which can simply help to live a healthier life. Hence, an attempt has been made in this study to visualize the effect of an application of titanium dioxide nano finish onto cotton and its blends with viscose and polyester to provide nano UV protection, without hampering the strength of the substrate.

This study aims to study the simultaneous treatment of polyethylene terephthalate (PET) fabric with sodium hydroxide (NaOH) and TiO₂ nanoparticles (NPs).

PET fabrics loaded by TiO₂ NPs were investigated by the use of scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and Fourier transformed infrared spectroscopy (FT-IR). Factors affecting the finishing process such as NaOH and TiO₂ NPs concentrations, finishing duration and temperature were discussed.

The finished PET fabrics imparted new properties such as antimicrobial and ultraviolet protection factor protection, what is undoubtedly will increase the spread of this type of fabric and its use in new areas.

The method used mainly depends on activating the surface of PET fabrics by a chemical method, specifically NaOH to cause partial decomposition, which may lead to an environmental impact.

The obtained results revealed that the simultaneous treatment of PET fabric with NaOH and TiO₂ NPs showed antimicrobial and UV protection properties. They exhibited a strong antimicrobial activity and UV protection efficiency even after five washing cycles, indicating excellent laundering durability.

The approach has simplicity and implementability on an industrial scale without cost investment.

In this study, an eco-friendly cotton fabric (CF) treatment method was proposed to induce anti-ultraviolet and flame retardant properties, and a new application of tannic acid (TA) and phytic acid (PA) in ultraviolet protection and flame retardant fabric was put forward.

By combining diethylenetriamine, PA and TA on CF, a chemical reaction intumescent flame retardant CF with anti-ultraviolet and anti-flame retardance was developed.

The flame retardant and ultraviolet resistance of CF were characterized by LOI, vertical combustion, cone calorimetry and ultraviolet resistance testing. SEM, XPS, FTIR and other tests were used to analyze the chemical composition, surface morphology and residual carbon after combustion of the CF, and it was confirmed that the modified CF has good ultraviolet resistance and flame retardant performance.

In this study, an eco-friendly CF treatment method was proposed to induce anti-ultraviolet and flame retardant properties, and a new application of TA and PA in ultraviolet protection and flame retardant fabric was put forward.