Search results

1 – 10 of 32
Open Access
Article
Publication date: 30 July 2021

Showkat Ahmad Shah and Md. Saiful Islam

A wetland is a place of tourist attraction, and tourism values play a key role in economic development. Among various services provided by a wetland, recreational services are…

3433

Abstract

Purpose

A wetland is a place of tourist attraction, and tourism values play a key role in economic development. Among various services provided by a wetland, recreational services are increasingly valuable in the tourism sector. This paper aims to unfold the potential recreational values of the Dal Lake in Jammu and Kashmir, India.

Design/methodology/approach

The study uses individual travel cost methods (TCMs) and assesses its impact on regional development in terms of income and employment generation. A sample of 200 tourists is selected through an on-site survey on Dal Lake, and the demand for recreational visits and its value is estimated by employing the truncated Poisson regression model (TPRM) and un-truncated Poisson regression model (UTPRM). The consumers' surplus is estimated and tourists' benefit to visiting the wetland is explored.

Findings

On average, estimated consumers' surplus per visitor is Rs 6,250 (US$96.15) and Rs 25,000 (US$384.61) from respective models. The annual total recreational value of the lake is accounted for Rs 1713m (US$ 26m). This high consumer surplus (CS) and recreational values of the lake indicate large demand for its recreational facilities.

Originality/value

The study is based on primary data and thus, is original. The paper has implications for the policymakers to formulate sustainable management plans for the proper use of Dal Lake and tourism development.

Details

International Hospitality Review, vol. 37 no. 1
Type: Research Article
ISSN: 2516-8142

Keywords

Open Access
Article
Publication date: 25 January 2010

John E. Berg

Prediction of increased risk of suicide is difficult. We had the opportunity to follow up 20 patients receiving electroconvulsive therapy (ECT) because of severe depression. They…

Abstract

Prediction of increased risk of suicide is difficult. We had the opportunity to follow up 20 patients receiving electroconvulsive therapy (ECT) because of severe depression. They filled in the Antonovsky sense of coherence test (SOC) and Beck depression inventory (BDI) before and after a series of ECT treatments. Seventeen surviving patients had a mean observation time of 20.6 months, whereas the three deceased patients had 11.3 months. There was a lower mean age at onset of illness and a longer mean duration of disease in the deceased. Other clinical parameters did not differ. The surviving patients had a significant decrease on the BDI from 35 to 18 (P<0.001) and an increase on the SOC test after ECT from 2.45 to 3.19 (P<0.001), indicating both less depression and better functioning in life. The deceased had a larger change on the BDI from 32 to 13, not attaining significance because of the low number of deceased. The SOC test, however, did not increase to a purported normal level; that is, from 2.43 to 2.87. Although the SOC scale has been shown to predict mortality in substance abusers, the SOC test has not been part of earlier reviews of predictive power. Tentatively, a low pathological score on the SOC test may indicate low sense of coherence in life that might increase the propensity for suicide. These preliminary results need replication in larger studies.

Details

Mental Illness, vol. 2 no. 1
Type: Research Article
ISSN: 2036-7465

Keywords

Open Access
Article
Publication date: 19 September 2019

Olga Petricevic and Alain Verbeke

The purpose of this paper is to explore two distinct subsets of dynamic capabilities that need to be deployed when pursuing innovation through inter-organizational activities…

3079

Abstract

Purpose

The purpose of this paper is to explore two distinct subsets of dynamic capabilities that need to be deployed when pursuing innovation through inter-organizational activities, respectively, in the contexts of broad networks and specific alliances. The authors draw distinctions and explore potential interdependencies between these two dynamic capability reservoirs, by integrating concepts from the theoretical perspectives they are derived from, but which have until now largely ignored each other – the social network perspective and the dynamic capabilities view.

Design/methodology/approach

The authors investigate nanotechnology-driven R&D activities in the 1995–2005 period for 76 publicly traded firms in the electronics and electrical equipment industry and in the chemicals and pharmaceuticals industry, that applied for 580 nanotechnology-related patents and engaged in 2,459 alliances during the observation period. The authors used zero-truncated Poisson regression as the estimation method.

Findings

The findings support conceptualizing dynamic capabilities as four distinct subsets, deployed for sensing or seizing purposes, and across the two different inter-organizational contexts. The findings also suggest potential synergies between these subsets of dynamic capabilities, with two subsets being more macro-oriented (i.e. sensing and seizing opportunities within networks) and the two other ones more micro-oriented (i.e. sensing and seizing opportunities within specific alliances).

Practical implications

The authors show that firms differ in their subsets of dynamic capabilities for pursuing different types of inter-organizational, boundary-spanning relationships (such as alliances vs broader network relationships), which ultimately affects their innovation performance.

Originality/value

The authors contribute to the growing body of work on dynamic capabilities and firm-specific advantages by unbundling the dynamic capability subsets, and investigating their complex interdependencies for managing different types of inter-organizational linkages. The main new insight is that the “linear model” of generating more innovations through higher inter-firm collaboration in an emerging field paints an erroneous picture of how high innovation performance is actually achieved.

Details

Cross Cultural & Strategic Management, vol. 26 no. 3
Type: Research Article
ISSN: 2059-5794

Keywords

Open Access
Article
Publication date: 2 April 2024

Koraljka Golub, Osma Suominen, Ahmed Taiye Mohammed, Harriet Aagaard and Olof Osterman

In order to estimate the value of semi-automated subject indexing in operative library catalogues, the study aimed to investigate five different automated implementations of an…

Abstract

Purpose

In order to estimate the value of semi-automated subject indexing in operative library catalogues, the study aimed to investigate five different automated implementations of an open source software package on a large set of Swedish union catalogue metadata records, with Dewey Decimal Classification (DDC) as the target classification system. It also aimed to contribute to the body of research on aboutness and related challenges in automated subject indexing and evaluation.

Design/methodology/approach

On a sample of over 230,000 records with close to 12,000 distinct DDC classes, an open source tool Annif, developed by the National Library of Finland, was applied in the following implementations: lexical algorithm, support vector classifier, fastText, Omikuji Bonsai and an ensemble approach combing the former four. A qualitative study involving two senior catalogue librarians and three students of library and information studies was also conducted to investigate the value and inter-rater agreement of automatically assigned classes, on a sample of 60 records.

Findings

The best results were achieved using the ensemble approach that achieved 66.82% accuracy on the three-digit DDC classification task. The qualitative study confirmed earlier studies reporting low inter-rater agreement but also pointed to the potential value of automatically assigned classes as additional access points in information retrieval.

Originality/value

The paper presents an extensive study of automated classification in an operative library catalogue, accompanied by a qualitative study of automated classes. It demonstrates the value of applying semi-automated indexing in operative information retrieval systems.

Details

Journal of Documentation, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0022-0418

Keywords

Open Access
Article
Publication date: 5 May 2022

Salvador del Saz-Salazar, Salvador Gil-Pareja and María José García-Grande

This study, using a contingent valuation approach, aims to shed light on the economic evaluation of online learning during the first wave of the pandemic.

1918

Abstract

Purpose

This study, using a contingent valuation approach, aims to shed light on the economic evaluation of online learning during the first wave of the pandemic.

Design/methodology/approach

A sample of 959 higher education students was asked about their willingness-to-accept (WTA) a monetary compensation for the loss of well-being resulting from the unexpected and mandatory transition to the online space. In explaining WTA determinants, the authors test the appropriateness of the double-hurdle model against the alternative of a Tobit model and find that the factors affecting the participation decision are not the same as those that affect the quantity decision.

Findings

Results show that a vast majority of the respondents think that the abrupt transition to online learning is detrimental to them, while those willing to accept a monetary compensation account for 77% of the sample, being the mean WTA between €448 and €595. As expected, WTA decreases with income and age, and it increases if some member of the family unit is unemployed. By aggregating the mean WTA by the population affected, total loss of well-being is obtained.

Originality/value

To the best of the authors’ knowledge, to date, this method has not been used to value online learning in a WTA framework, much less in the particular context of the pandemic. Thus, based on the understanding that the economic evaluation of online learning could be very useful in providing guidance for decision-making, this paper contributes to the literature on the economic evaluation of higher education.

Details

Applied Economic Analysis, vol. 31 no. 91
Type: Research Article
ISSN: 2632-7627

Keywords

Open Access
Article
Publication date: 8 December 2022

James Christopher Westland

This paper tests whether Bayesian A/B testing yields better decisions that traditional Neyman-Pearson hypothesis testing. It proposes a model and tests it using a large, multiyear…

1222

Abstract

Purpose

This paper tests whether Bayesian A/B testing yields better decisions that traditional Neyman-Pearson hypothesis testing. It proposes a model and tests it using a large, multiyear Google Analytics (GA) dataset.

Design/methodology/approach

This paper is an empirical study. Competing A/B testing models were used to analyze a large, multiyear dataset of GA dataset for a firm that relies entirely on their website and online transactions for customer engagement and sales.

Findings

Bayesian A/B tests of the data not only yielded a clear delineation of the timing and impact of the intellectual property fraud, but calculated the loss of sales dollars, traffic and time on the firm’s website, with precise confidence limits. Frequentist A/B testing identified fraud in bounce rate at 5% significance, and bounces at 10% significance, but was unable to ascertain fraud at the standard significance cutoffs for scientific studies.

Research limitations/implications

None within the scope of the research plan.

Practical implications

Bayesian A/B tests of the data not only yielded a clear delineation of the timing and impact of the IP fraud, but calculated the loss of sales dollars, traffic and time on the firm’s website, with precise confidence limits.

Social implications

Bayesian A/B testing can derive economically meaningful statistics, whereas frequentist A/B testing only provide p-value’s whose meaning may be hard to grasp, and where misuse is widespread and has been a major topic in metascience. While misuse of p-values in scholarly articles may simply be grist for academic debate, the uncertainty surrounding the meaning of p-values in business analytics actually can cost firms money.

Originality/value

There is very little empirical research in e-commerce that uses Bayesian A/B testing. Almost all corporate testing is done via frequentist Neyman-Pearson methods.

Details

Journal of Electronic Business & Digital Economics, vol. 1 no. 1/2
Type: Research Article
ISSN: 2754-4214

Keywords

Open Access
Article
Publication date: 22 November 2022

Kedong Yin, Yun Cao, Shiwei Zhou and Xinman Lv

The purposes of this research are to study the theory and method of multi-attribute index system design and establish a set of systematic, standardized, scientific index systems…

Abstract

Purpose

The purposes of this research are to study the theory and method of multi-attribute index system design and establish a set of systematic, standardized, scientific index systems for the design optimization and inspection process. The research may form the basis for a rational, comprehensive evaluation and provide the most effective way of improving the quality of management decision-making. It is of practical significance to improve the rationality and reliability of the index system and provide standardized, scientific reference standards and theoretical guidance for the design and construction of the index system.

Design/methodology/approach

Using modern methods such as complex networks and machine learning, a system for the quality diagnosis of index data and the classification and stratification of index systems is designed. This guarantees the quality of the index data, realizes the scientific classification and stratification of the index system, reduces the subjectivity and randomness of the design of the index system, enhances its objectivity and rationality and lays a solid foundation for the optimal design of the index system.

Findings

Based on the ideas of statistics, system theory, machine learning and data mining, the focus in the present research is on “data quality diagnosis” and “index classification and stratification” and clarifying the classification standards and data quality characteristics of index data; a data-quality diagnosis system of “data review – data cleaning – data conversion – data inspection” is established. Using a decision tree, explanatory structural model, cluster analysis, K-means clustering and other methods, classification and hierarchical method system of indicators is designed to reduce the redundancy of indicator data and improve the quality of the data used. Finally, the scientific and standardized classification and hierarchical design of the index system can be realized.

Originality/value

The innovative contributions and research value of the paper are reflected in three aspects. First, a method system for index data quality diagnosis is designed, and multi-source data fusion technology is adopted to ensure the quality of multi-source, heterogeneous and mixed-frequency data of the index system. The second is to design a systematic quality-inspection process for missing data based on the systematic thinking of the whole and the individual. Aiming at the accuracy, reliability, and feasibility of the patched data, a quality-inspection method of patched data based on inversion thought and a unified representation method of data fusion based on a tensor model are proposed. The third is to use the modern method of unsupervised learning to classify and stratify the index system, which reduces the subjectivity and randomness of the design of the index system and enhances its objectivity and rationality.

Details

Marine Economics and Management, vol. 5 no. 2
Type: Research Article
ISSN: 2516-158X

Keywords

Open Access
Article
Publication date: 24 November 2021

Ruonan Liu, Yuhui Yue, Dongling Miao and Baodong Cheng

This article will select 25 years of subdivided data to perform Kaplan–Meier survival analysis on the export trade relations of Chinese wooden flooring, use discrete-time cloglog…

Abstract

Purpose

This article will select 25 years of subdivided data to perform Kaplan–Meier survival analysis on the export trade relations of Chinese wooden flooring, use discrete-time cloglog models to analyze influencing factors, use logit and probit models to test the robustness, and try to systematically reveal the duration of China's wood flooring export trade and its influencing factors.

Design/methodology/approach

This study used Kaplan–Meier survival function estimation method. In the survival analysis, survival function and hazard rate function are often used to characterize the distribution of survival time.

Findings

The continuous average export time of China's wooden flooring is relatively long, about 14 years. China's wooden flooring has a negative time dependency. After the export trade exceeds the threshold value of 15 years, the failure rate of trade greatly decreases, which has a “threshold effect.” Gravity model variables have a significant impact on the duration of China's wooden floor export.

Originality/value

Studying the duration of forest products trade is of great significance for clearing deep-level trade relations and promoting sustainable development of forest products trade.

Details

Forestry Economics Review, vol. 3 no. 1
Type: Research Article
ISSN: 2631-3030

Keywords

Open Access
Article
Publication date: 1 June 2014

Gary T. O’Neill

This paper reports a sub-set of results from a mixed-method ethnographic study of literacy among female graduates and undergraduates of a United Arab Emirates public university…

Abstract

This paper reports a sub-set of results from a mixed-method ethnographic study of literacy among female graduates and undergraduates of a United Arab Emirates public university. With reference to survey data and two in-depth interviews, the paper focuses in particular on the predispositions and preferences of these women with regard to reading and writing in English and Modern Standard Arabic. Employing a New Literacy Studies theoretical framework along with a number of concepts developed by Bourdieu, the paper finds that literacy practices in this context are developing rapidly, influenced by the diverse transnational linguistic marketplaces in which these women grow up. Suggestions are made with regard to possible directions for curricular development in higher education in this region based on the opinions expressed by these young women.

Details

Learning and Teaching in Higher Education: Gulf Perspectives, vol. 11 no. 1
Type: Research Article
ISSN: 2077-5504

Open Access
Article
Publication date: 3 April 2017

Xin Li, Jianzhong Shang and Zhuo Wang

The paper aims to promote the development of intelligent materials and the 4D printing technology by introducing recent advances and applications of additive layered manufacturing…

15542

Abstract

Purpose

The paper aims to promote the development of intelligent materials and the 4D printing technology by introducing recent advances and applications of additive layered manufacturing (ALM) technology of intelligent materials and the development of the 4D printing technology. Also, an arm-type ALM technology of shape memory polymer (SMP) with thermosetting polyurethane is briefly introduced.

Design/methodology/approach

This paper begins with an overview of the development and applications of intelligent materials around the world and the 4D printing technology. Then, the authors provide a brief outline of their research on arm-type ALM technology of SMP with thermosetting polyurethane.

Findings

The paper provides the recent developments and applications of intelligent materials and 4D printing technology. Then, it is suggested that intelligent materials mixed with different functional materials will be developed, and these types of materials will be more suitable for 4D printing.

Originality/value

This paper overviews the current developments and applications of intelligent materials and its use in 4D printing technology, and briefly states the authors’ research on arm-type ALM technology of SMP with thermosetting polyurethane.

Details

Assembly Automation, vol. 37 no. 2
Type: Research Article
ISSN: 0144-5154

Keywords

1 – 10 of 32