Search results

The traveling purchaser problem (TPP) has gained attention in academics to deal with different variants in real business world. This study aims to study a green TPP with quantity discounts and soft time windows (TPPQS), in which a firm needs to purchase products from a set of available markets and deliver the products to a set of customers.

Vehicles are available to visit the markets, which offer products at different prices and with different quantity discount schemes. Soft time windows are present for the markets and the customers, and earliness cost and tardiness may incur if a vehicle cannot arrive a market or a customer within the designated time interval. The environmental impact of transportation activities is considered. The objective of this research is to minimize the total cost, including vehicle-assigning cost, vehicle-traveling cost, purchasing cost, emission cost, earliness cost and tardiness cost, while meeting the total demand of the customers and satisfying all the constraints. A mixed integer programming (MIP) model and a genetic algorithm (GA) approach are proposed to solve the TPPQS.

The results show that both the MIP and the GA can obtain optimal solutions for small-scale cases, and the GA can generate near-optimal solutions for large-scale cases within a short computational time.

The proposed models can help firms increase the performance of customer satisfaction and provide valuable supply chain management references in the service industry.

The proposed models for TPPQS are novel and can facilitate firms to design their green traveling purchasing plans more effectively in today’s environmental conscious and competitive market.

The purpose of this paper is to present the methodology and the results on the design and development of an autonomous, golf ball picking robot, for driving ranges.

The strategy followed to develop a commercial product is presented, based on prior identification requirements, which consist of picking up golf balls on a driving range in a safe and efficient way.

A fully working prototype robot has been developed. It uses two driving wheels and a third cast wheel, and pushes a standard gang which collects the balls from the ground. A hybrid information system was implemented in order to provide a statistically relevant prediction of golf balls location, to optimize the path the robot has to follow in order to reduce time and cost. Autonomous navigation was developed and tested on a simulation environment.

Preliminary results showed that the new path planning algorithm Twin‐RRT* is able to form closed loop trajectories and improve the result over time. Kinematic constraints were already taken into account on the algorithm. This sampling based algorithm has potential usage in solving other TPP (Travelling Purchaser Problem) related problems.

The prototype feasibility is being tested in real driving ranges. It has autonomy of up to 8 h per day. It is capable of collecting up to 1,200 balls in one single journey. It weighs 130 kg and is capable of climbing slopes of up to 22°. The maximum speed is 8 km/h and the robot takes 140 min to completely sweep a 25,000 m² field at 7.2 km/h (2 m/s) average speed.

There are about 30,000 golf practice fields, of which 18,000 are located in the USA and Canada. In some countries the golf industry represents more than 15 per cent of tourism GNP. In a typical practice field, about 10,000 balls have to be picked up every day.

An important contribution of this paper is the algorithm for path planning in order to optimize the ball pick up task, reducing time and cost. There are two patents are pending concerning the technological novelties of this work.

This paper aims to examine containership routing and speed optimization for maritime liner services. It focuses on a realistic case in which the transport demand, and consequently the collected revenue from the visited ports depend on the sailing speed.

The authors present an integer non-linear programming model for the containership routing and fleet sizing problem, in which the sailing speed of every leg, the ports to be included in the service and their sequence are optimized based on the net line's profit. The authors present a heuristic approach that is based on speed discretization and a genetic algorithm to solve the problem for large size instances. They present an application on a line provided by COSCO in 2017 between Asia and Europe.

The numerical results show that the proposed heuristic approach provides good quality solutions after a reasonable computation time. In addition, the demand sensitivity has a great impact on the selected route and therefore the profit function. Moreover, the more the demand is sensitive to the sailing speed, the higher the sailing speed value.

The vessel carrying capacity is not considered in an explicit way.

This paper focuses on an important aspect in liner shipping, i.e. demand sensitivity to sailing speed. It brings a novel approach that is important in a context in which sailing speed strategies and market volatility are to be considered together in network design. This perspective has not been addressed previously.

This paper aims to describe colonial competitive algorithm (CCA), a novel socio‐politically inspired optimization strategy, and how it is used to solve real world engineering problems by applying it to the problem of designing a multivariable proportional‐integral‐derivative (PID) controller. Unlike other evolutionary optimization algorithms, CCA is inspired from a socio‐political process – the competition among imperialists and colonies. In this paper, CCA is used to tune the parameters of a multivariable PID controller for a typical distillation column process.

The controller design objective was to tune the PID controller parameters so that the integral of absolute errors, overshoots and undershoots be minimized. This multi‐objective optimization problem is converted to a mono‐objective one by adding up all the objective functions in which the absolute integral of errors is emphasized to be reduced as long as the overshoots and undershoots remain acceptable.

Simulation results show that the controller tuning approach, proposed in this paper, can be easily and successfully applied to the problem of designing MIMO controller for control processes. As a result not only was the controlled process able to significantly reduce the coupling effect, but also the response speed was significantly increased. Also a genetic algorithm (GA) and an analytical method are used to design the controller parameters and are compared with CCA. The results showed that CCA had a higher convergence rate than GA, reaching to a better solution.

The proposed PID controller tuning approach is interesting for the design of controllers for industrial and chemical processes, e.g. MIMO evaporator plant. Also the proposed evolutionary algorithm, CCA, can be used in diverse areas of optimization problems including, industrial planning, resource allocation, scheduling, decision making, pattern recognition and machine learning.

The Howard Shuttering Contractors case throws considerable light on the importance which the tribunals attach to warnings before dismissing an employee. In this case the tribunal took great pains to interpret the intention of the parties to the different site agreements, and it came to the conclusion that the agreed procedure was not followed. One other matter, which must be particularly noted by employers, is that where a final warning is required, this final warning must be “a warning”, and not the actual dismissal. So that where, for example, three warnings are to be given, the third must be a “warning”. It is after the employee has misconducted himself thereafter that the employer may dismiss.

A distinction must be drawn between a dismissal on the one hand, and on the other a repudiation of a contract of employment as a result of a breach of a fundamental term of that contract. When such a repudiation has been accepted by the innocent party then a termination of employment takes place. Such termination does not constitute dismissal (see London v. James Laidlaw & Sons Ltd (1974) IRLR 136 and Gannon v. J. C. Firth (1976) IRLR 415 EAT).

To achieve a full understanding of the role of marketing from plan to profit requires a knowledge of the basic building blocks. This textbook introduces the key concepts in the art or science of marketing to practising managers. Understanding your customers and consumers, the 4 Ps (Product, Place, Price and Promotion) provides the basic tools for effective marketing. Deploying your resources and informing your managerial decision making is dealt with in Unit VII introducing marketing intelligence, competition, budgeting and organisational issues. The logical conclusion of this effort is achieving sales and the particular techniques involved are explored in the final section.

Independent travelers are those vacationers who have booked only a minimum of their transportation and accommodation arrangements prior to departure on the vacation. Independent travel is an important and growing sector of worldwide tourism. Choice of vacation itinerary for the independent vacation represents a complex series of decisions regarding purchase of multiple leisure and tourism services. This chapter builds and tests a model of independent traveler decision-making for choice of vacation itinerary. The research undertaken employs a two-phase, inductive–deductive case study design. In the deductive phase, the researcher interviewed 20 travel parties vacationing in New Zealand for the first time. The researcher interviewed respondents at both the beginning and the end of their New Zealand vacations. The study compares pre-vacation research and plans, and actual vacation behaviors, on a case-by-case basis. The study examines case study narratives and quantitative measures of crucial variables. The study tests two competing models of independent traveler decision-making, using a pattern-matching procedure. This embedded research design results in high multi-source, multi-method validity for the supported model. The model of the Independent Vacation as Evolving Itinerary suggests that much of the vacation itinerary experienced in independent travel is indeed unplanned, and that a desire to experience the unplanned is a key hedonic motive for independent travel. Rather than following a fixed itinerary, the itinerary of an independent vacation evolves as the vacation proceeds. The independent traveler takes advantage of serendipitous opportunities to experience a number of locations, attractions and activities that they had neither actively researched nor planned.

The Equal Pay Act 1970 (which came into operation on 29 December 1975) provides for an “equality clause” to be written into all contracts of employment. S.1(2) (a) of the 1970 Act (which has been amended by the Sex Discrimination Act 1975) provides:

Knight's Industrial Law Reports goes into a new style and format as Managerial Law This issue of KILR is restyled Managerial Law and it now appears on a continuous updating basis rather than as a monthly routine affair.