Search results

The conventional strain gauge type pressure sensor suffers in static testing of engines due to the contact transduction method. This paper aims to focus on the concept of non-contact transduction-based pressure sensor using eddy current displacement sensing coil (ECDS) to overcome the temperature limitations of the strain gauge type pressure sensor. This paper includes the fabrication of prototypes of the proposed pressure sensor and its performance evaluation by static calibration. The fabricated pressure sensor is proposed to measure pressure in static test environment for a short period in the order of few seconds. The limitations of the fabricated pressure sensor related to temperature problems are highlighted and the suitable design changes are recommended to aid the future design.

The design of ECDS-based pressure sensor is aimed to provide non-contact transduction to overcome the limitations of the strain gauge type of pressure sensor. The ECDS is designed and fabricated with two configurations to measure deflection of the diaphragm corresponding to the applied pressure. The fabricated ECDS is calibrated using a standard micro meter to ensure transduction within limits. The fabricated prototypes of pressure sensors are calibrated using dead weight tester, and the calibration results are analyzed to select the best configuration. The proposed pressure sensor is tested at different temperatures, and the test results are analyzed to provide recommendations to overcome the shortcomings.

The performance of the different configurations of the pressure sensor using ECDS is evaluated using the calibration data. The analysis of the calibration results indicates that the pressure sensor using ECDS (coil-B) with the diaphragm as target is the best configuration. The accuracy of the fabricated pressure sensor with best configuration is ±2.8 per cent and the full scale (FS) output is 3.8 KHz. The designed non-contact transduction method extends the operating temperature of the pressure sensor up to 150°C with the specified accuracy for the short period.

Most studies of eddy current sensing coil focus on the displacement and position measurement but not on the pressure measurement. This paper is concerned with the design of the pressure sensor using ECDS to realize the non-contact transduction to overcome the limitations of strain gauge type pressure sensors and evaluation of the fabricated prototypes. It is shown that the accuracy of the proposed pressure sensor is not affected by the high temperature for the short period due to non-contact transduction using ECDS.

Si-based micro electro mechanical systems (MEMS) magnetometer does not require specialized magnetic materials avoiding magnetic hysteresis, ease in fabrication and low power consumption. It can be fabricated using the same processes used for gyroscope and accelerometer fabrication. The paper reports the dicing mechanism for the released MEMS xylophone magnetic sensor fabricated using wafer bonding technology and its characterization in ambient pressure and under vacuum conditions. The purpose of this paper is to dice the wafer bonded Si-magnetometer in a cost-effective way without the use of laser dicing and test it for Lorentz force transduction.

A xylophone bar MEMS magnetometer using Lorentz force transduction is developed. The fabricated MEMS-based xylophone bars in literature are approximately 500 µm. The present work shows the released structure (L = 592 µm) fabricated by anodic bonding technique using conducting Si as the structural layer and tested for Lorentz force transduction. The microstructures fabricated at the wafer level are released. Dicing these released structures using conventional diamond blade dicing may damage the structures and reduce the yield. To avoid the problem, positive photoresist S1813 was filled before dicing. The dicing of the wafer, filled with photoresist and later removal of photoresist post dicing, is proposed.

The devices realized are stiction free and straight. The dynamic measurements are done using laser Doppler vibrometer to verify the released structure and test its functionality for Lorentz force transduction. The magnetic field is applied using a permanent magnet and Helmholtz coil. Two sensors with quality factors 70 and 238 are tested with resonant frequency 112.38 kHz and 114.38 kHz, respectively. The sensor D2, with Q as 238, shows a mechanical sensitivity of 500 pm/Gauss and theoretical Brownian noise-limited resolution of 53 nT/vHz.

The methodology and the study will help develop Lorentz force–based MEMS magnetometers such that stiction-free structures are released using wet etch after the mechanical dicing.

The purpose of this paper is to bring both Simondonian and Deleuzian insights to bear upon the nature of documents and documentation by viewing them as non-representationalist, and as products of transduction and reticulation that render documents assemblages that are in constant negotiation with an environment as instances of a perpetually renewing problematic.

Simondon's work on metastability and transduction can offer particular insights into how the author views documents in terms of their materiality, signification, and possibly to move beyond the phenomenological bias in the treatment of documents.

In understanding or describing the process of documentation as a reticulation or unfolding, the author also comes to view the document as an assemblage in perpetual negotiation. This paper adapts Deleuze and Guattari's articulation framework of expression-signification and provides a bit of groundwork towards two registers of information (first and second order) according to the preindividual process of that allows for the individuation of documents.

This paper makes an original contribution to understanding the process of documentation and the product of documents in a more fluid, interdynamic context by shifting or displacing the traditional view of information.

How does the human brain absorb information and turn it into skills of its own in psychotherapy? In an attempt to answer this question, the authors will review the intricacies of processing channels in psychotherapy and propose the term transprocessing (as in transduction and processing combined) for the underlying mechanisms. Through transprocessing the brain processes multimodal memories and creates reparative solutions in the course of psychotherapy. Transprocessing is proposed as a stage-sequenced mechanism of deconstruction of engrained patterns of response. Through psychotherapy, emotional-cognitive reintegration and its consolidation is accomplished. This process is mediated by cellular and neural plasticity changes.

The purpose of this paper is to investigate how a viable system, the honey bee swarm, gathers meaningful information about potential new nest sites in its problematic environment.

This investigation uses a cybernetic model of a self-organising information network to analyse the findings from the last 60 years published research on swarm behaviour.

Nest site scouts used a modified foraging network to carry out a very thorough survey of the swarm’s problematic environment, providing the swarm with a considerable diversity of potential nest sites for consideration. The swarm utilised a number of randomly recruited groups of scouts to obtain numerous independent opinions about potential nest sites, each privately evaluated, publicly reported and repeatedly tested by new recruits. Independent evaluation of site quality was balanced by interdependent reporting of site location. Noise was reduced by integration over a large number of individual scouts and over a period of time. The swarm was therefore able to reduce potential sources of bias, distortion and noise, providing it with comparatively reliable information for decision making.

Information gathering by a honey bee swarm has not previously been modelled as a self-organising information network. The findings may be of value to human decision-making groups.

Considering its vast utility in industries, this paper aims to present a detailed review on fundamentals, classification and progresses in pressure sensors, along with its wide area of applications, its design aspects and challenges, to provide state-of-the-art gist to the researchers of the similar domain at one place.

Swiftly emerging research prospects in the micro-electro-mechanical system (MEMS) enable to build complex and sophisticated micro-structures on a substrate containing moving masses, cantilevers, flexures, levers, linkages, dampers, gears, detectors, actuators and many more on a single chip. One of the MEMS initial products that emerged into the micro-system technology is MEMS pressure sensor. Because of their high performance, low cost and compact in size, these sensors are extensively being adopted in numerous applications, namely, aerospace, automobile and bio-medical domain, etc. These application requirements drive and impose tremendous conditions on sensor design to overcome the tedious design and fabrication procedure before its reality. MEMS-based pressure sensors enable a wide range of pressure measurement as per the application requirements.

The paper provides a detailed review on fundamentals, classification and progresses in pressure sensors, along with its wide area of applications, its design aspects and challenges, to provide state of the art gist to the researchers of the similar domain at one place.

The present paper discusses the basics of MEMS pressure sensors, their working principles, different design aspects, classification, type of sensing diaphragm used and illustration of various transduction mechanisms. Moreover, this paper presents a comprehensive review on present trend of research on MEMS-based pressure sensors, its applications and the research gap observed till date along with the scope for future work, which has not been discussed in earlier reviews.

This review aims to focus on recent reported research work on the construction and function of different electrochemical DNA biosensors. It also describes different sensing materials, chemistries of immobilization probes, conditions of hybridization and principles of transducing and amplification strategies.

The human disease-related mutated genes or DNA sequence detection at low cost can be verified by the electrochemical-based biosensor. A range of different chemistries is used by the DNA-based electrochemical biosensors, out of which the interactions of nanoscale material with recognition layer and a solid electrode surface are most interesting. A diversity of advancements has been made in the field of electrochemical detection.

Some important aspects are also highlighted in this review, which can contribute in the creation of successful biosensing devices in the future.

This paper provides an updated review of construction and sensing technologies in the field of biosensing.

This paper aims to look at three management research papers, which are placed in dialogue with Gilbert Simondon’s philosophy.

Notable research articles are subjected to a thorough de-construction and re-construction process, as they are examined through the lens of Gilbert Simondon’s ontological and epistemological perspectives.

Some solutions to epistemological antinomies underpinning management science are proposed, by relying on Simondonian paradigms.

This paper involved no direct field study. The transcendental status of Simondon’s propositions is briefly called into question but is not addressed per se.

Showing the fuzziness, not to say irrelevance, of efforts to make a strict demarcation between business and society, as illustrated by qualitative meta-analyses of management science cases.

Simondon’s importance is barely beginning to be acknowledged in the field of Social and Management Science. This paper takes a step toward rectifying this oversight by providing scholars with an introduction to his main concepts and illustrates how they might be transposed into management science by subjecting management scholarly papers to his “experiments of thought” approach.

Although first rank symptoms focus on positive symptoms of psychosis they are shared by a number of psychiatric conditions. The difficulty in differentiating bipolar disorder from schizophrenia with affective features has led to a third category of patients often loosely labeled as schizoaffective. Research in schizophrenia has attempted to render the presence or absence of negative symptoms and their relation to etiology and prognosis more explicit. A dichotomous population is a recurring theme in experimental paradigms. Thus, schizophrenia is defined as process or reactive, deficit or non-deficit and by the presence or absence of affective symptoms. Laboratory tests confirm the clinical impression showing conflicting responses to dexamethasone suppression and clearly defined differences in autonomic responsiveness, but their patho-physiological significance eludes mainstream theory. Added to this is the difficulty in agreeing to what exactly constitutes useful clinical features differentiating, for example, negative symptoms of a true deficit syndrome from features of depression. Two recent papers proposed that the general and specific cognitive features of schizophrenia and major depression result from a monoamine-cholinergic imbalance, the former due to a relative muscarinic receptor hypofunction and the latter, in contrast, to a muscarinic hypersensitivity exacerbated by monoamine depletion. Further development of these ideas will provide pharmacological principles for what is currently an incomplete and largely, descriptive nosology of psychosis. It will propose a dimensional view of affective and negative symptoms based on relative muscarinic integrity and is supported by several exciting intracellular signaling and gene expression studies. Bipolar disorder manifests both muscarinic and dopaminergic hypersensitivity. The greater the imbalance between these two receptor signaling systems, the more the clinical picture will resemble schizophrenia with bizarre, incongruent delusions and increasingly disorganized thought. The capacity for affective expression, by definition a non-deficit syndrome, will remain contingent on the degree of preservation of muscarinic signaling, which itself may be unstable and vary between trait and state examinations. At the extreme end of muscarinic impairment, a deficit schizophrenia subpopulation is proposed with a primary and fixed muscarinic receptor hypofunction.

The genomic profile of bipolar disorder and schizophrenia overlap and both have a common dopaminergic intracellular signaling which is hypersensitive to various stressors. It is proposed that the concomitant muscarinic receptor upregulation differentiates the syndromes, being marked in bipolar disorder and rather less so in schizophrenia. From a behavioral point of view non-deficit syndromes and bipolar disorder appear most proximate and could be reclassified as a spectrum of affective psychosis or schizoaffective disorders. Because of a profound malfunction of the muscarinic receptor, the deficit subgroup cannot express a comparable stress response. None -theless, a convergent principle of psychotic features across psychiatric disorders is a relative monoaminergic-muscarinic imbalance in signal transduction.