Search results

This paper aims to present a set of processes for obtaining the global spraying trajectory of a cold spraying robot on a complex surface.

The complex workpiece surfaces in the project are first divided by triangular meshing. Then, the geodesic curve method is applied for local path planning. Finally, the subsurface trajectory combination optimization problem is modeled as a GTSP problem and solved by the ant colony algorithm, where the evaluation scores and the uniform design method are used to determine the optimal parameter combination of the algorithm. A global optimized spraying trajectory is thus obtained.

The simulation results show that the proposed processes can achieve the shortest global spraying trajectory. Moreover, the cold spraying experiment on the IRB4600 six-joint robot verifies that the spraying trajectory obtained by the processes can ensure a uniform coating thickness.

The proposed processes address the issue of different parameter combinations, leading to different results when using the ant colony algorithm. The two methods for obtaining the optimal parameter combinations can solve this problem quickly and effectively, and guarantee that the processes obtain the optimal global spraying trajectory.

In the digital assembly system of large aircraft components (LAC), the docking trajectory of LAC is an important factor affecting the docking accuracy and stability of the LAC. The main content of docking trajectory planning is how to move the LAC from the initial posture and position to the target posture and position (TPP). This paper aims to propose a trajectory planning method of LAC based on measured data.

First, the posture and position error model of the wing is constructed according to the measured data of the measurement points (MPs) and the fork lug joints. Second, the particle swarm optimization algorithm based on the dynamic inertia factor is used to optimize the TPP of the wing. Third, to ensure the efficiency and stability of posture adjustment, the S-shaped curve is used as the motion trajectory of LAC, and the parameters of the trajectory are solved by the generalized multiplier method. Finally, a series of docking experiments are carried out.

During the process of posture adjustment, the motion of the numerical control locator (NCL) is stable, and the interaction force between the NCLs is always within a reasonable range. After the docking, the MPs are all within the tolerance range, and the coaxiality error of the fork lug hole is less than 0.2 mm.

In this paper, the measured data rather than the theoretical design model is used to solve the TPP, which improves the docking accuracy of LAC. Experiment results show that the proposed trajectory method can complete the LAC docking effectively and improve the docking accuracy.

The purpose of this paper is using a model-free reinforcement learning (RL) algorithm to optimize manipulability which can overcome difficulties of dilemmas of matrix inversion, complicated formula transformation and expensive calculation time.

Manipulability optimization is an effective way to solve the singularity problem arising in manipulator control. Some control schemes are proposed to optimize the manipulability during trajectory tracking, but they involve the dilemmas of matrix inversion, complicated formula transformation and expensive calculation time.

The redundant manipulator trained by RL can adjust its configuration in real-time to optimize the manipulability in an inverse-free manner while tracking the desired trajectory. Computer simulations and physics experiments demonstrate that compared with the existing methods, the average manipulability is increased by 58.9%, and the calculation time is reduced to 17.9%. Therefore, the proposed method effectively optimizes the manipulability, and the calculation time is significantly shortened.

To the best of the authors’ knowledge, this is the first method to optimize manipulability using RL during trajectory tracking. The authors compare their approach to existing singularity avoidance and manipulability maximization techniques, and prove that their method has better optimization effects and less computing time.

Many existing trajectory optimization algorithms use parameters like maximum velocity or acceleration to formulate constraints. Due to the ignoring of the quadrotor actual tracking capability, the generated trajectories may not be suitable for tracking control. The purpose of this paper is to design an online adjustment algorithm to improve the overall quadrotor trajectory tracking performance.

The authors propose a reference trajectory resampling layer (RTRL) to dynamically adjust the reference signals according to the current tracking status and future tracking risks. First, the authors design a risk-aware tracking monitor that uses the Frenét tracking errors and the curvature and torsion of the reference trajectory to evaluate tracking risks. Then, the authors propose an online adjusting algorithm by using the time scaling method.

The proposed RTRL is shown to be effective in improving the quadrotor trajectory tracking accuracy by both simulation and experiment results.

Infeasible reference trajectories may cause serious accidents for autonomous quadrotors. The results of this paper can improve the safety of autonomous quadrotor in application.

In the post-capture stage, the tumbling target rotates the combined spacecraft system, and the detumbling operation performed by the space robot is required. To save the costly onboard fuel of the space robot, this paper aims to present a novel post-capture detumbling strategy.

Actuated by the joint rotations of the manipulator, the combined system is driven from three-axis tumbling state to uniaxial rotation about its maximum principal axis. Only unidirectional thrust perpendicular to the axis is needed to slow down the uniaxial rotation, thus saving the thruster fuel. The optimization problem of the collision-free detumbling trajectory of the space robot is described, and it is optimized by the particle swarm optimization algorithm.

The numerical simulation results show that along the trajectory planned by the detumbling strategy, the maneuver of the manipulator can precisely drive the combined system to rotate around its maximum principal axis, and the final kinetic energy of the combined system is smaller than the initial. The unidirectional thrust and the lower kinetic energy can ensure the fuel-saving in the subsequent detumbling stage.

This paper presents a post-capture detumbling strategy to drive the combined system from three-axis tumbling state to uniaxial rotation about its maximum principal axis by redistributing the angular momentum of the parts of the combined system. The strategy reduces the thrust torque for detumbling to effectively save the thruster fuel.

This paper aims to study using a mobile manipulator with a collaborative robotic arm component to manipulate objects beyond the robot’s maximum payload.

This paper proposes a single-short probabilistic roadmap-based method to plan and optimize manipulation motion with environment support. The method uses an expanded object mesh model to examine contact and randomly explores object motion while keeping contact and securing affordable grasping force. It generates robotic motion trajectories after obtaining object motion using an optimization-based algorithm. With the proposed method’s help, the authors plan contact-rich manipulation without particularly analyzing an object’s contact modes and their transitions. The planner and optimizer determine them automatically.

The authors conducted experiments and analyses using simulations and real-world executions to examine the method’s performance. The method successfully found manipulation motion that met contact, force and kinematic constraints. It allowed a mobile manipulator to move heavy objects while leveraging supporting forces from environmental obstacles.

This paper presents an automatic approach for solving contact-rich heavy object manipulation problems. Unlike previous methods, the new approach does not need to explicitly analyze contact states and build contact transition graphs, thus providing a new view for robotic grasp-less manipulation, nonprehensile manipulation, manipulation with contact, etc.

Legged walking robots have numerous advantages over the wheel or tracked robots due to their strong operational ability and exposure to the complex environment. This paper aims to present details about the mechanical formation and a new conceptual elliptical trajectory generation discussed throughout the paper of the quadruped robot.

Initially, a realistic CAD model of the four-legged robot is developed in Solidwork-2019. The proposed model’s forward and inverse kinematics equations are deduced using Denavit–Hartenberg parameters. Based on geometry and kinematics, manipulability and obstacle avoidance are investigated. A method of galloping trajectory is proposed for aiming the increase of upright direction impulse, which is produced by ground reaction force at each step frequency. Furthermore, the locomotion equation of the ellipse trajectory is derived by setting transition angle polynomial of free-fall phase, stance phase and swing phase and the constraints.

Finally, a successive simulation on a 2D sagittal plane is performed to check and verify the usefulness of the proposed trajectory. Before the development of the full quadruped, a single prototype leg is generated for experimental verification of the dynamic simulations.

The proposed trajectory is novel in that it uses force tracking control, which is intended to improve the quadruped robot’s robustness and stability.

This paper aims to focus on solving the path optimization problem by modifying the probabilistic roadmap (PRM) technique as it suffers from the selection of the optimal number of nodes and deploy in free space for reliable trajectory planning.

Traditional PRM is modified by developing a decision-making strategy for the selection of optimal nodes w.r.t. the complexity of the environment and deploying the optimal number of nodes outside the closed segment. Subsequently, the generated trajectory is made smoother by implementing the modified Bezier curve technique, which selects an optimal number of control points near the sharp turns for the reliable convergence of the trajectory that reduces the sum of the robot’s turning angles.

The proposed technique is compared with state-of-the-art techniques that show the reduction of computational load by 12.46%, the number of sharp turns by 100%, the number of collisions by 100% and increase the velocity parameter by 19.91%.

The proposed adaptive technique provides a better solution for autonomous navigation of unmanned ground vehicles, transportation, warehouse applications, etc.

Robotic arms’ interactions with the external environment are growing more intricate, demanding higher control precision. This study aims to enhance control precision by establishing a dynamic model through the identification of the dynamic parameters of a self-designed robotic arm.

This study proposes an improved particle swarm optimization (IPSO) method for parameter identification, which comprehensively improves particle initialization diversity, dynamic adjustment of inertia weight, dynamic adjustment of local and global learning factors and global search capabilities. To reduce the number of particles and improve identification accuracy, a step-by-step dynamic parameter identification method was also proposed. Simultaneously, to fully unleash the dynamic characteristics of a robotic arm, and satisfy boundary conditions, a combination of high-order differentiable natural exponential functions and traditional Fourier series is used to develop an excitation trajectory. Finally, an arbitrary verification trajectory was planned using the IPSO to verify the accuracy of the dynamical parameter identification.

Experiments conducted on a self-designed robotic arm validate the proposed parameter identification method. By comparing it with IPSO1, IPSO2, IPSOd and least-square algorithms using the criteria of torque error and root mean square for each joint, the superiority of the IPSO algorithm in parameter identification becomes evident. In this case, the dynamic parameter results of each link are significantly improved.

A new parameter identification model was proposed and validated. Based on the experimental results, the stability of the identification results was improved, providing more accurate parameter identification for further applications.

This paper aims to propose a train timetable rescheduling (TTR) approach from the perspective of multi-train tracking optimization based on the mutual spatiotemporal information in the high-speed railway signaling system.

Firstly, a single-train trajectory optimization (STTO) model is constructed based on train dynamics and operating conditions. The train kinematics parameters, including acceleration, speed and time at each position, are calculated to predict the arrival times in the train timetable. A STTO algorithm is developed to optimize a single-train time-efficient driving strategy. Then, a TTR approach based on multi-train tracking optimization (TTR-MTTO) is proposed with mutual information. The constraints of temporary speed restriction (TSR) and end of authority are decoupled to calculate the tracking trajectory of the backward tracking train. The multi-train trajectories at each position are optimized to generate a time-efficient train timetable.

The numerical experiment is performed on the Beijing-Tianjin high-speed railway line and CR400AF. The STTO algorithm predicts the train’s planned arrival time to calculate the total train delay (TTD). As for the TSR scenario, the proposed TTR-MTTO can reduce TTD by 60.60% compared with the traditional TTR approach with dispatchers’ experience. Moreover, TTR-MTTO can optimize a time-efficient train timetable to help dispatchers reschedule trains more reasonably.

With the cooperative relationship and mutual information between train rescheduling and control, the proposed TTR-MTTO approach can automatically generate a time-efficient train timetable to reduce the total train delay and the work intensity of dispatchers.