Search results

The purpose of this paper is to design a modified version of the double sampling plan to handle the inspection processes requiring a minimum sample size to assure the median life for the products under the new Weibull–Pareto distribution. The economic design of the proposed plan is also considered to assure the product's lifetime with minimum cost.

The authors have developed an optimization model for obtaining the required plan parameters by solving simultaneously two non-linear inequalities and such inequalities have been formed based on the two points on the operating characteristic curve approach.

The results show that the average sample number, average total inspection and total inspection cost under the proposed plan are smaller than the same of a single sampling plan. This means that the proposed plan will be more efficient than a single sampling plan in reducing inspection effort and cost while providing the desired protection.

The proposed modified double sampling plan designed to assure the median life of the products under the new Weibull–Pareto distribution is not available in the literature. The proposed plan will be very useful in assuring the product median lifetime with minimum sample size as well as minimum cost in all the manufacturing industries.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

Building information modeling (BIM) is mostly limited to the design phase where two parallel processes exist, i.e. creating 2D-drawings and BIM. Towards the end of the design process, BIM becomes obsolete as focus shifts to producing static 2D-drawings, which leads to a lack of trust in BIM. In Scandinavia, a concept known as Total BIM has emerged, which is a novel “all-in” approach where BIM is the single source of information throughout the project. This paper's purpose is to investigate the overall concept and holistic approach of a Total BIM project to support implementation and strategy work connected to BIM.

Qualitative data were collected through eight semi-structured interviews with digitalization leaders from the case study project. Findings were analyzed using a holistic framework to BIM implementation.

The Total BIM concept was contingent on the strong interdependences between commonly found isolated BIM uses. Four main success factors were identified, production-oriented BIM as the main contractual and legally binding construction document, cloud-based model management, user-friendly on-site mobile BIM software and strong leadership.

A unique case is studied where BIM is used throughout all project phases as a single source of information and communication platform. No 2D paper drawings were used on-site and the Total BIM case study highlights the importance of a new digitalized construction process.

Distribution network design involves a set of strategic decisions in supply chains because of their long-term impacts on the total logistics cost and environment. To incorporate a trade-off between financial and environmental aspects of these decisions, this paper aims to determine an optimal location, among candidate locations, of a new logistics center, its capacity, as well as optimal network flows for an existing distribution network, while concurrently minimizing the total logistics cost and gas emission. In addition, uncertainty in transportation and warehousing costs are considered.

The problem is formulated as a fuzzy multiobjective mathematical model. The effectiveness of this model is demonstrated using an industrial case study. The problem instance is a four-echelon distribution network with 22 products and a planning horizon of 20 periods. The model is solved by using the min–max and augmented ε-constraint methods with CPLEX as the solver. In addition to illustrating model’s applicability, the effect of choosing a new warehouse in the model is investigated through a scenario analysis.

For the applicability of the model, the results indicate that the augmented ε-constraint approach provides a set of Pareto solutions, which represents the ideal trade-off between the total logistics cost and gas emission. Through a case study problem instance, the augmented ε-constraint approach is recommended for similar network design problems. From a scenario analysis, when the operational cost of the new warehouse is within a specific fraction of the warehousing cost of third-party warehouses, the solution with the new warehouse outperforms that without the new warehouse with respective to financial and environmental objectives.

The proposed model is an effective decision support tool for management, who would like to assess the impact of network planning decisions on the performance of their supply chains with respect to both financial and environmental aspects under uncertainty.

Corporate site visits increase labor investment efficiency.

Our empirical model for the baseline analysis follows those of Jung et al. (2014) and Ghaly et al. (2020).

We show that corporate site visits are associated with significantly higher labor investment efficiency; more specifically, site visits reduce both over-hiring and under-hiring of employees. The effect of site visits on labor investment efficiency is more pronounced for firms with higher labor adjustment costs, greater financial constraints, weaker corporate governance and lower financial reporting quality. We also find that site visits mitigate labor cost stickiness.

First, while the literature has suggested how the presence of institutional investors and analysts may affect labor investment decisions, we focus on institutional investors and analysts’ activities and interactions with firm executives. We provide direct evidence that institutional investors and analysts may use corporate site visits to improve labor investment efficiency. Second, our study adds to a line of recent studies on how corporate site visits reduce information asymmetry and agency conflicts. We show that corporate site visits allow institutional investors and analysts to influence labor investment efficiency. We also provide new evidence that corporate site visits reduce labor cost stickiness.

Prefabricated products are continually entering the building construction market; yet, the decision to use prefabricated products in a construction project is based mostly on personal preferences and the evaluation of direct costs. Researchers and practitioners have debated appropriate measurement systems for evaluating the impacts of prefabricated products and for comparing them with conventional on-site construction practices. The more advanced, cost–benefit approach to evaluating prefabricated products often inspires controversy because it may generate inaccurate results when converting non-monetary effects into costs. As prefabrication may affect multiple organisations and product subsystems, the method used to decide on production methods should consider multiple direct and indirect impacts, including nonmonetary ones. Thus, this study aims to develop a multi-criteria method to evaluate both the monetary and non-monetary impacts of prefabrication solutions to facilitate decision-making on whether to use prefabricated products.

Drawing upon a literature review, this research suggests a multi-criteria method that combines the choosing-by-advantage approach with a cost–benefit analysis. The method was presented for validation in focus group discussions and tested in a case involving a prefabricated bathroom.

The analysis indicates that the method helps a project’s stakeholders communicate about the relative merits of prefabrication and conventional construction while facilitating the final decision of whether to use prefabrication.

This research contributes a method of evaluating the monetary and non-monetary impacts of prefabricated products. The research underlines the need to evaluate the diverse benefits and sacrifices that stakeholder face when considering production methods in construction.

This paper aims to examine the level of economic efficiency and factors that influence economic efficiency among seed potato producers in South-western Uganda.

The paper analyses the economic efficiency of 499 informal and 137 formal seed producers using primary data collected through a structured questionnaire. A multi-stage sampling technique was used to select the study sites and specific farmers. A one-step estimation procedure of normalized translog cost frontier and inefficiency model was employed to determine the level of economic efficiency and the influencing factors.

The results showed that mean economic efficiencies were 91.7 and 95.2% for informal and formal seed potato producers, respectively. Furthermore, results show significant differences between formal and informal seed potato producers in economic efficiency at a one percent level. Market information access, credit access, producers' capacity and experience increase the efficiency of informal while number of potato varieties, market information access and producers' experience increase economic efficiency for formal counterparts.

Most seed potato producers, especially the informal ones do not keep comprehensive records of their production and marketing activities. This required more probing as answers depended on memory recall.

Future research could explore panel data approach involving more cropping seasons with time variant economic efficiency and individual unobservable characteristics that may influence farmers' efficiency to validate the current findings.

The paper shows that there is more potential for seed potato producers to increase their economic efficiency given the available technology. This has a direct implication on the economy through increased investment in the production and promotion of high yielding seed potato varieties to meet the growing national demand for potatoes.

The paper bridges the gap in literature on economic efficiency among seed potato producers, specifically in applying the normalized translog cost frontier approach in estimating economic efficiency in the context of potato sub-sector in Uganda.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-10-2021-0641

With the increasing concern over environmental pollution and global warming, companies are required to act responsibly to mitigate these environmental issues. Their activities should adhere to the standards of environmental sustainability. Thus, this study aimed to investigate the impact of green supply chain management (GSCM) and total quality management (TQM) on environmental sustainability, with environmental management practices (EMP) as the moderating factor.

A quantitative study was adopted using the management data from various manufacturing companies in Jordan. A total of 362 responses were collected, and the proposed hypotheses were tested using a structural equation model.

The study findings revealed that both GSCM and TQM significantly and positively influenced environmental sustainability. The impact of TQM on environmental sustainability was higher than that of GSCM. Moreover, no evidence was found on the moderating role of EMP.

The study’s results highlighted to the decision-makers the main practices to expand the quality implementation across their supply chain to improve environmental sustainability. The study also demonstrated the reasons behind the insignificance of EMPs in strengthening the relationships between GSCM, TQM, and environmental sustainability.

While there are very few studies examining the relationships between GSCM and TQM on environmental sustainability. This study adds to the literature body as one of a few empirical studies that tested the integrated effect of GSCM and TQM practices within the context of the manufacturing industry in a developing country. Moreover, this study takes a holistic approach by tapping into EMP to confirm whether it moderated the relationships between GSCM, TQM, and environmental sustainability.

This study examines how bilateral international trade among mandatory International Financial Reporting Standards (IFRS) adopter countries moderates the relation between IFRS adoption and firms’ financial reporting quality.

The authors use data from 2007 to 2015 and focus on publicly listed firms from non-European Union countries that adopted IFRS on a mandatory basis.

The authors find that the interaction between mandatory IFRS adoption and a country’s bilateral trade with other countries using IFRS is negatively and significantly related to accruals-based earnings management, which is an inverse measure of financial reporting quality. This result is driven by firms in less developed countries. The improvement in accounting quality is for firms located in countries that both fully and partially adopt IFRS. The authors also find a significant and negative coefficient for the relation between real earnings management and the interaction between mandatory IFRS adoption and a country’s bilateral trade with other IFRS countries in the post-global financial crisis period.

Overall, the authors’ results are consistent with the notion that the mandatory adoption of IFRS creates a positive externality where firms improve their accounting quality because increased financial statement comparability means that foreign customers and suppliers can monitor the quality of earnings more easily.

This paper aims to identify and empirically analyze useful and applicable metrics for measuring and managing the sustainability performance of small and medium-sized enterprises (SMEs).

To achieve the objective of the paper, potential metrics were adopted from previous research related to industrial sustainability and an empirical analysis was carried to assess the applicability of the metrics by collecting empirical data from Italian footwear SMEs using a structured questionnaire. The SMEs were selected using a convenience sampling method.

The results of the within-case analysis and the cross-case analysis indicate that the majority of the metrics were found to be useful and applicable to each of the SMEs and across the SMEs, respectively. These metrics emphasized measuring industrial sustainability performance related to financial benefits, costs and market competitiveness for the economic sustainability dimension; resources for the environmental sustainability dimension; and customers, employees and the community for the social sustainability dimension.

Apart from the within-case analysis and cross-case analysis, it was not possible to conduct statistical analysis since a small number of SMEs were accessible to collect empirical data.

The findings of the paper have considerable academic, managerial and policy implications and will provide a theoretical basis for future research on measuring and managing industrial sustainability performance. By providing a set of empirically supported metrics based on the triple bottom line approach (i.e. economic, environmental and social metrics), this paper contributes to the existing knowledge in the field of industrial sustainability performance measurement.