Search results
1 – 10 of over 1000Abbas Rezaeian, Mona Mansoori and Amin Khajehdezfuly
Top-seat angle connection is known as one of the usual uncomplicated beam-to-column joints used in steel structures. This article investigates the fire performance of welded top…
Abstract
Purpose
Top-seat angle connection is known as one of the usual uncomplicated beam-to-column joints used in steel structures. This article investigates the fire performance of welded top-seat angle connections.
Design/methodology/approach
A finite element (FE) model, including nonlinear contact interactions, high-temperature properties of steel, and material and geometric nonlinearities was created for accomplishing the fire performance analysis. The FE model was verified by comparing its simulation results with test data. Using the verified model, 24 steel-framed top-seat angle connection assemblies are modeled. Parametric studies were performed employing the verified FE model to study the influence of critical factors on the performance of steel beams and their welded angle joints.
Findings
The results obtained from the parametric studies illustrate that decreasing the gap size and the top angle size and increasing the top angles thickness affect fire behavior of top-seat angle joints and decrease the beam deflection by about 16% at temperatures beyond 570 °C. Also, the fire-resistance rating of the beam with seat angle stiffener increases about 15%, compared to those with and without the web stiffener. The failure of the beam happens when the deflections become more than span/30 at temperatures beyond 576 °C. Results also show that load type, load ratio and axial stiffness levels significantly control the fire performance of the beam with top-seat angle connections in semi-rigid steel frames.
Originality/value
Development of design methodologies for these joints and connected beam in fire conditions is delayed by current building codes due to the lack of adequate understanding of fire behavior of steel beams with welded top-seat angle connections.
Details
Keywords
Sana El Kalash and Elie Hantouche
This paper aims at developing a mechanical-based model for predicting the thermally induced axial forces and rotation of steel top and seat angles connections with and without web…
Abstract
Purpose
This paper aims at developing a mechanical-based model for predicting the thermally induced axial forces and rotation of steel top and seat angles connections with and without web angles subjected to elevated temperatures due to fire. Finite element (FE) simulations and experimental results are used to develop the mechanical model.
Design/methodology/approach
The model incorporates the overall connection and column-beam rotation of key component elements, and includes nonlinear behavior of bolts and base materials at elevated temperatures and some major geometric parameters that impact the behavior of such connections when exposed to fire. This includes load ratio, beam length, angle thickness, and gap distance. The mechanical model consists of multi-linear and nonlinear springs that predict each component stiffness, strength, and rotation.
Findings
The capability of the FE model to predict the strength of top and seat angles under fire loading was validated against full scale tests. Moreover, failure modes, temperature at failure, maximum compressive axial force, maximum rotation, and effect of web angles were all determined in the parametric study. Finally, the proposed mechanical model was validated against experimental results available in the literature and FE simulations developed as a part of this study.
Originality/value
The proposed model provides important insights into fire-induced axial forces and rotations and their implications on the design of steel bolted top and seat angle connections. The originality of the proposed mechanical model is that it requires low computational effort and can be used in more advanced modelling applications for fire analysis and design.
Details
Keywords
Amir Saedi Daryan and Mahmood Yahyai
This paper aims to predicting the behavior of welded angle connections (moment-rotation-temperature) in fire using artificial neural network 10.
Abstract
Purpose
This paper aims to predicting the behavior of welded angle connections (moment-rotation-temperature) in fire using artificial neural network 10.
Design/methodology/approach
An artificial neural networking model is described to predict the moment-rotation response of semi-rigid beam-to-column joints at elevated temperature.
Findings
Data from 47 experimental fire tests and verified finite element model are used for training and testing and validating the neural network models. The model’s predicted values are compared with actual test results. The results indicate that the models can predict the moment-rotation-temperature behavior of semi-rigid beam-to-column joints with very high accuracy. The developed model can be modified easily to investigate other parameters that influence the performance of joints in fire.
Originality/value
The results indicate that the models can predict the moment-rotation-temperature behavior of semi-rigid beam-to-column joints with very high accuracy. The developed model can be modified easily to investigate other parameters that influence the performance of joints in fire.
Details
Keywords
This article aims to address an outstanding problem dealing with the structure and its foundation.
Abstract
Purpose
This article aims to address an outstanding problem dealing with the structure and its foundation.
Design/methodology/approach
Differential settlement between foundation units of a multistory structure has been responsible for serious damage to buildings and often catastrophic failure and loss of life. The dynamic changes in the loading conditions of the structure, and the variability of the underlying ground due to environmental changes, are causing the undesirable differential settlement, which is manifested in the form of additional stresses in beams, columns and distortion of the structure elements. The structural response to the differential settlements depends on the type of the structure (concrete or steel), type of beam-to-column connections (rigid or semi-rigid), number of floors and the spans of the beams in the building. This paper presents the results of a numerical model, which was developed using the finite element technique and the software “ABAQUS” to analyze a nine-floor steel structure. The model was capable to capture the stresses and the strains developed in beams and columns and the relationships of moment–settlement and rotation–settlement for the structural during the differential settlement of its foundation. After validating of the model, data were produced for a wide range of governing parameters for rigid and semi-rigid connections and accordingly the mode of failure. The results can be used as a guideline for the design of steel structures.
Findings
Results are useful for those design steel structures.
Research limitations/implications
This study is based on the experimental and numerical data of the authors.
Practical implications
This study provides a guideline for the design of steel structures.
Originality/value
This is the original research developed by the authors.
Details
Keywords
Mohammad Hajjar, Elie Hantouche and Ahmad El Ghor
This study aims to develop a rational model to predict the thermal axial forces developed in shear tab connections with composite beams when subjected to transient-state fire…
Abstract
Purpose
This study aims to develop a rational model to predict the thermal axial forces developed in shear tab connections with composite beams when subjected to transient-state fire temperatures.
Design/methodology/approach
Finite element (FE) models are first developed in ABAQUS and validated against experimental data available in the literature. Second, a parametric study is conducted to identify the major parameters that affect the behavior of shear tab connections with composite beams in the fire. This includes beam length, shear tab thickness, shear tab location, concrete slab thickness, setback distance and partial composite action. A design-oriented model is developed to predict the thermal induced axial forces during the heating and cooling phases of a fire event. The model consists of multi-linear springs that can predict the stiffness and strength of each component of the connection with the composite beam.
Findings
The FE results show that significant thermal axial forces are generated in the composite beam in the fire. This is prominent when the beam bottom flange comes in contact with the column. Fracture at the toe of the welds governs the behavior during the cooling phase in most FE simulations. Also, the rational model is validated against the FE results and is capable of predicting the thermal axial forces developed in shear tab connections with composite beams under different geometrical properties.
Originality/value
The proposed model can predict the thermal axial force demand and can be used in performance-based approaches in future structural fire engineering applications.
Details
Keywords
Radha Athipathi G., Arunkumar C. and Umamaheswari N.
The use of flexible connections throughout the steel structures provides a high level of stiffness compared to that of fully welded connections. Flexible connections allow for…
Abstract
Purpose
The use of flexible connections throughout the steel structures provides a high level of stiffness compared to that of fully welded connections. Flexible connections allow for rotation to an extent, which make them perform better during earthquake than welded connections. In hanger connections, the applied load produces tension in the bolts and bolts are designed for tensile forces. When the deformation of the flange plate is equal to that of the bolts, a plastic hinge is formed in the flange plate at the weld line and the bolts are pulled to failure. If the attached plate is allowed to deform, additional tensile forces called prying forces are developed in the bolts. The paper aims to discuss these issues.
Design/methodology/approach
This paper includes the results of investigation on prying force in T-stub connection fabricated with normal grade bolts and high strength friction grip (HSFG) bolts. Finite element analysis has been carried out by creating models and analyzing the effect of external tensile force and bolt force. For different grades of bolt (4.6, 8.8, 10.9, 12.9), the prying force is calculated.
Findings
It is found that prying force is increasing with the change in grade of bolt used from normal to HSFG. The results obtained from analysis using IS 800:2007 codal provision are also included. It is observed that HSFG bolts do not allow for any slip between the elements connected and hence rigidity is increased.
Originality/value
The prying force mainly depends on geometrical parameter of the connection. In this research work, the variation of prying force was studied based on the variation in dimensions of T-stub angle section and bolt grade (4.6, 8.8, 10.9, 12.9). The method of obtaining prying force from bolt load and applied load is a unique approach. The results of FE analysis is validated with the analytical calculation as per IS 800:2007 code provisions, which shows the originality of the research.
Details
Keywords
Miguel Abambres and Mário Rui Arruda
Since the use of advanced finite element analysis (FEA) in the design of steel structures has been increasing its popularity in order to avoid unsafe or highly conservative…
Abstract
Purpose
Since the use of advanced finite element analysis (FEA) in the design of steel structures has been increasing its popularity in order to avoid unsafe or highly conservative designs, a solid know-how in computer-aided design (CAD) and engineering (CAE) codes is necessary. Therefore the purpose of this paper is to provide an extensive review of useful guidelines concerning modelling, simulation and result validation for the accurate performance of those analyses.
Design/methodology/approach
Such guidelines are obtained from international steel design codes like Eurocode 3 and DNV, publications from experienced CAE engineers and renowned FE software companies like Ansys and Altair. Topics like mesh independence, the effect of the load sequence on the load bearing capacity and steel fracture criteria are underlined.
Findings
Since the use of advanced FEA in the design of steel structures is becoming more and more traditional due to the increase of its competitiveness when compared to the use of (very) conservative design rules, a solid know-how in CAD and CAE codes is necessary.
Practical implications
This work will be quite useful for structural steel stress engineers, contributing for a safer use of FEA in research and design.
Originality/value
This work will be quite useful for structural steel stress engineers, contributing for a safer use of FEA in research and design.
Details
Keywords
C.H. Cumberland and G.S. Bowey
THE passenger seat in civil aircraft is an important piece of equipment. It is important, firstly because it is the one part of the aircraft with which the passenger is in…
Abstract
THE passenger seat in civil aircraft is an important piece of equipment. It is important, firstly because it is the one part of the aircraft with which the passenger is in intimate contact and, secondly, because of the bulk and multiplicity of installation in any aircraft, the aggregate weight constitutes a major portion of equipment weight.
EACH September the eyes of the aeronautical World turn towards the S.B.A.C. Air Display and Exhibition with interest unequalled by any other event. It is fitting that the Display…
Abstract
EACH September the eyes of the aeronautical World turn towards the S.B.A.C. Air Display and Exhibition with interest unequalled by any other event. It is fitting that the Display is now held each year at the airfield of the Royal Aircraft Establishment, one of the world's most prominent aeronautical research centres. This interest becomes increasingly keen too, as the preview day comes closer, because new prototypes of unorthodox designs often appear a short time before the Show to illustrate the results of years of careful planning, development and research of the particular company. These designs often mould the path of progress for smaller countries without the economic resources to forge the way ahead alone. Most British citizens are very proud of their country's place in aviation today, both in the military and civil fields. This is understood by most foreigners because it is clear that Britain has won a place in aeronautical development second to none.