Search results
1 – 10 of 11Varun Sabu Sam, M.S. Adarsh, Garry Robson Lyngdoh, Garry Wegara K. Marak, N. Anand, Khalifa Al-Jabri and Diana Andrushia
The capability of steel columns to support their design loads is highly affected by the time of exposure and temperature magnitude, which causes deterioration of mechanical…
Abstract
Purpose
The capability of steel columns to support their design loads is highly affected by the time of exposure and temperature magnitude, which causes deterioration of mechanical properties of steel under fire conditions. It is known that structural steel loses strength and stiffness as temperature increases, particularly above 400 °C. The duration of time in which steel is exposed to high temperatures also has an impact on how much strength it loses. The time-dependent response of steel is critical when estimating load carrying capacity of steel columns exposed to fire. Thus, investigating the structural response of cold-formed steel (CFS) columns is gaining more interest due to the nature of such structural elements.
Design/methodology/approach
In this study, experiments were conducted on two CFS configurations: back-to-back (B-B) channel and toe-to-toe (T-T) channel sections. All CFS column specimens were exposed to different temperatures following the standard fire curve and cooled by air or water. A total of 14 tests were conducted to evaluate the capacity of the CFS sections. The axial resistance and yield deformation were noted for both section types at elevated temperatures. The CFS column sections were modelled to simulate the section's behaviour under various temperature exposures using the general-purpose finite element (FE) program ABAQUS. The results from FE modelling agreed well with the experimental results. Ultimate load of experiment and finite element model (FEM) are compared with each other. The difference in percentage and ratio between both are presented.
Findings
The results showed that B-B configuration showed better performance for all the investigated parameters than T-T sections. A noticeable loss in the ultimate strength of 34.5 and 65.6% was observed at 90 min (986℃) for B-B specimens cooled using air and water, respectively. However, the reduction was 29.9 and 46% in the T-T configuration, respectively.
Originality/value
This research paper focusses on assessing the buckling strength of heated CFS sections to analyse the mode of failure of CFS sections with B-B and T-T design configurations under the effect of elevated temperature.
Details
Keywords
Reyhan Sabri and Belgin Sakallı
Places of worship have historically been maintained using traditional building management techniques, including regular monitoring, upkeep and maintenance provided by their…
Abstract
Purpose
Places of worship have historically been maintained using traditional building management techniques, including regular monitoring, upkeep and maintenance provided by their religious communities. This paper examines the conservation issues arising after the forced displacement of the traditional custodians, which is a significant concern in conflict-ridden environments.
Design/methodology/approach
As a unique example of a long-term conflict, the divided Cyprus provides this research with illustrative cases to derive the data. The research employs content analysis of official documents, physical observations and interviews with conservation professionals.
Findings
This research demonstrates the human and environmental factors impacting the conservation of the material fabric and the use-related challenges stemming from the intangible significance of the religious legacy belonging to displaced communities. It highlights the urgency to formulate more effective mechanisms and regulatory frameworks to address vulnerability issues promptly.
Originality/value
Preservation problems on religious heritage buildings arising from the loss of traditional custodians after conflicts are an under-researched area in conservation literature. Drawing on research that was conducted several decades after the displacement of Cypriot communities, this paper reveals new insights into the magnitude of the conservation problems and the use-related complexities that need to be addressed to formulate mutually acceptable solutions for a sustainable future.
Details
Keywords
Minakshi Koundal, Ajay Kumar Singh and Chhaya Sharma
This paper aims to investigate the eco-friendly neodymium tartrate (NdTar) inhibitor for mild steel in sodium chloride (NaCl) solution.
Abstract
Purpose
This paper aims to investigate the eco-friendly neodymium tartrate (NdTar) inhibitor for mild steel in sodium chloride (NaCl) solution.
Design/methodology/approach
The mild steel 1010 coupon was considered for the current study. Weight loss and the electrochemical methods were used to evaluate the inhibitory effects of neodymium chloride (NdCl3) and NdTar on mild steel in NaCl solution. Scanning electron microscopy, energy-dispersive X-ray analysis and attenuated total reflectance-Fourier transform infrared spectroscopy measurements were carried out to study the morphology and composition of the film, nature of deposits and corrosion products formed in test media on the corroded steel, with the objective of further analyzing the observed behavior of the two inhibitors.
Findings
Of the two, NdTar performs better than NdCl3 because it shields mild steel surfaces for longer. According to the results, when NdCl3 is present in a corrosive solution, the protective film only comprises Nd/Fe oxide/hydroxide/carbonate. However, when neodymium is coupled with the tartrate group (an organic group) and then added to the NaCl solution, the inhibitor film comprises both bimetallic complexes (Fe-Tar-Nd) and metal oxide/hydroxide/carbonate, which results in a more compact film and has higher inhibition efficiency.
Originality/value
This study evaluated the combined effects of inorganic and organic inhibitors with those of an inorganic inhibitor used alone for mild steel in NaCl solution.
Details
Keywords
Nilaya Murthy and Santosh Gopalkrishnan
This paper aims to understand the emotional patterns of senior citizens when they digitally transact online and how the personality trait of neuroticism can be a vital part of…
Abstract
Purpose
This paper aims to understand the emotional patterns of senior citizens when they digitally transact online and how the personality trait of neuroticism can be a vital part of being susceptible to fraud. The authors identify with the cognitive aspect of fear as a vista of neuroscience and behavioural finance in digital banking in today’s banking 5.0 where consumer centricity stands as one of the pillars of the Digital Payment Index of RBI.
Design/methodology/approach
This study is empirical and investigative in nature. Primary data has been collected through online questionnaires (via Google Forms) and the interview method to understand the phenomenology of fear and incidents related to becoming victims of fraud and its propensity.
Findings
The results exhibit that fear and emotional patterns do affect vulnerability and have a long-lasting psychological impact and susceptivity towards digital frauds.
Practical implications
Fear as an emotion is used to understand the emotional expressive patterns of senior citizens as consumers of digital banking. The OCEAN model is one of the widely used personality models at the global level. This research study helps in highlighting the nuances linked to the behavioural and cognitive part of fear in digital crime.
Originality/value
This research will be beneficial to reduce the susceptibility towards fraud from a behavioural perspective in the usage of digital banking and evaluate solutions for senior citizens to mitigate and cope up with the pressures and perils associated with digital frauds.
Details
Keywords
Hui Jie Li and Deqing Tan
The purpose of the study is to investigate strategies for enhancing pollution oversight by local governments while reducing government-enterprise collusion (GEC) levels…
Abstract
Purpose
The purpose of the study is to investigate strategies for enhancing pollution oversight by local governments while reducing government-enterprise collusion (GEC) levels. Additionally, the factors influencing pollution control efforts at incineration plants are explored. Potential approaches to improving them and for effectively reducing waste incineration pollution are suggested.
Design/methodology/approach
The authors examined the most effective methods for mitigating incineration-related pollution and preventing collusion and developed a differential game model involving interactions between local governments and incineration plants. The findings of this work have significant policy implications for central governments worldwide seeking to regulate waste incineration practices.
Findings
The results indicate that, first, elevating environmental assessment standards can incentivize local governments to improve their oversight efforts. Second, collusion between incineration plants and local governments can be deterred by transferring benefits from the plants to the local government, while increased supervision by the central government and the enforcement of penalties for collusion can also mitigate collusion. Third, both central and local governments can bolster their supervisory and penalty mechanisms for instances of excessive pollution, encouraging incineration plants to invest more in pollution control. Finally, when the central government finds it challenging to detect excessive incineration-related pollution, enhancing rewards and penalties at the local government level can be a viable alternative.
Originality/value
This study stands out by considering the dynamic nature of pollutants. A differential game model is constructed which captures the evolving dynamics between local governments and incineration plants, offering insights regarding the prevention of collusion from a dynamic perspective. The findings may provide a valuable reference for governments as they develop and enforce regulations while motivating incineration plants to actively engage in reducing waste-incineration pollution.
Details
Keywords
Nagat Zalhaf, Mariam Ghazy, Metwali Abdelatty and Mohamed Hamed Zakaria
Even though it is widely used, reinforced concrete (RC) is susceptible to damage from various environmental factors. The hazard of a fire attack is particularly severe because it…
Abstract
Purpose
Even though it is widely used, reinforced concrete (RC) is susceptible to damage from various environmental factors. The hazard of a fire attack is particularly severe because it may cause the whole structure to collapse. Furthermore, repairing and strengthening existing structures with high-performance concrete (HPC) has become essential from both technical and financial points of view. In particular, studying the postfire behavior of HPC with normal strength concrete substrate requires experimental and numerical investigations. Accordingly, this study aims to numerically investigate the post-fire behavior of reinforced composite RC slabs.
Design/methodology/approach
Consequently, in this study, a numerical analysis was carried out to ascertain the flexural behavior of simply supported RC slabs strengthened with HPC and exposed to a particularly high temperature of 600°C for 2 h. This behavior was investigated and analyzed in the presence of a number of parameters, such as HPC types (fiber-reinforced, 0.5% steel, polypropylene fibers [PPF], hybrid fibers), strengthening side (tension or compression), strengthening layer thickness, slab thickness, boundary conditions, reinforcement ratio and yield strength of reinforcement.
Findings
The results showed that traction-separation and full-bond models can achieve accuracy compared with experimental results. Also, the fiber type significantly affects the postfire performance of RC slab strengthened with HPC, where the inclusion of hybrid fiber recorded the highest ultimate load. While adding PPF to HPC showed a rapid decrease in the load-deflection curve after reaching the ultimate load.
Originality/value
The proposed model accurately predicted the thermomechanical behavior of RC slabs strengthened with HPC after being exposed to the fire regarding load-deflection response, crack pattern and failure mode. Moreover, the considered independent parametric variables significantly affect the composite slabs’ behavior.
Details
Keywords
Xing Ai, Shuaishuai Wang, Fenghua Luo, Haiqing Pei and Zhenwei Li
The purpose of this study is to describe the mechanism of single-crystal high-temperature creep deformation, predict the creep life more accurately and study the creep…
Abstract
Purpose
The purpose of this study is to describe the mechanism of single-crystal high-temperature creep deformation, predict the creep life more accurately and study the creep constitutive and lifetime models with microstructure evolution.
Design/methodology/approach
The mechanical properties of nickel-based single-crystal superalloy are closely related to the γ' phase. Creep tests under four different temperature and stress conditions were carried out. The relationship between creep temperature, stress and life is fitted by numerical method, and the creep activation energy is obtained. The creep fracture surface, morphology and evolution of strengthening phase (γ') and matrix phase (γ) during different creep periods were observed by scanning electron microscope. With the increase of creep temperature, the rafting time is advanced. The detailed morphology and evolution of dislocations were observed by transmission electron microscope (TEM).
Findings
With the increase of creep temperature, the rafting time is advanced. The detailed morphology and evolution of dislocations were observed by TEM. Dislocations are mainly concentrated in the γ channel phase, especially at high temperature and low stress.
Originality/value
A creep constitutive model based on the evolution of γ' phase size and γ channel width was proposed. Compared with the experimental results, the predicted creep life is within 1.4 times error dispersion band.
Details
Keywords
Mustafa Çimen, Damla Benli, Merve İbiş Bozyel and Mehmet Soysal
Vehicle allocation problems (VAPs), which are frequently confronted in many transportation activities, primarily including but not limited to full truckload freight transportation…
Abstract
Purpose
Vehicle allocation problems (VAPs), which are frequently confronted in many transportation activities, primarily including but not limited to full truckload freight transportation operations, induce a significant economic impact. Despite the increasing academic attention to the field, literature still fails to match the needs of and opportunities in the growing industrial practices. In particular, the literature can grow upon the ideas on sustainability, Industry 4.0 and collaboration, which shape future practices not only in logistics but also in many other industries. This review has the potential to enhance and accelerate the development of relevant literature that matches the challenges confronted in industrial problems. Furthermore, this review can help to explore the existing methods, algorithms and techniques employed to address this problem, reveal directions and generate inspiration for potential improvements.
Design/methodology/approach
This study provides a literature review on VAPs, focusing on quantitative models that incorporate any of the following emerging logistics trends: sustainability, Industry 4.0 and logistics collaboration.
Findings
In the literature, sustainability interactions have been limited to environmental externalities (mostly reducing operational-level emissions) and economic considerations; however, emissions generated throughout the supply chain, other environmental externalities such as waste and product deterioration, or the level of stakeholder engagement, etc., are to be monitored in order to achieve overall climate-neutral services to the society. Moreover, even though there are many types of collaboration (such as co-opetition and vertical collaboration) and Industry 4.0 opportunities (such as sharing information and comanaging distribution operations) that could improve vehicle allocation operations, these topics have not yet received sufficient attention from researchers.
Originality/value
The scientific contribution of this study is twofold: (1) This study analyses decision models of each reviewed article in terms of decision variable, constraint and assumption sets, objectives, modeling and solving approaches, the contribution of the article and the way that any of sustainability, Industry 4.0 and collaboration aspects are incorporated into the model. (2) The authors provide a discussion on the gaps in the related literature, particularly focusing on practical opportunities and serving climate-neutrality targets, carried out under four main streams: logistics collaboration possibilities, supply chain risks, smart solutions and various other potential practices. As a result, the review provides several gaps in the literature and/or potential research ideas that can improve the literature and may provide positive industrial impacts, particularly on how logistics collaboration may be further engaged, which supply chain risks are to be incorporated into decision models, and how smart solutions can be employed to cope with uncertainty and improve the effectiveness and efficiency of operations.
Details
Keywords
Amer Jazairy, Emil Persson, Mazen Brho, Robin von Haartman and Per Hilletofth
This study presents a systematic literature review (SLR) of the interdisciplinary literature on drones in last-mile delivery (LMD) to extrapolate pertinent insights from and into…
Abstract
Purpose
This study presents a systematic literature review (SLR) of the interdisciplinary literature on drones in last-mile delivery (LMD) to extrapolate pertinent insights from and into the logistics management field.
Design/methodology/approach
Rooting their analytical categories in the LMD literature, the authors performed a deductive, theory refinement SLR on 307 interdisciplinary journal articles published during 2015–2022 to integrate this emergent phenomenon into the field.
Findings
The authors derived the potentials, challenges and solutions of drone deliveries in relation to 12 LMD criteria dispersed across four stakeholder groups: senders, receivers, regulators and societies. Relationships between these criteria were also identified.
Research limitations/implications
This review contributes to logistics management by offering a current, nuanced and multifaceted discussion of drones' potential to improve the LMD process together with the challenges and solutions involved.
Practical implications
The authors provide logistics managers with a holistic roadmap to help them make informed decisions about adopting drones in their delivery systems. Regulators and society members also gain insights into the prospects, requirements and repercussions of drone deliveries.
Originality/value
This is one of the first SLRs on drone applications in LMD from a logistics management perspective.
Details
Keywords
Wenping Xu, Yuan Zhang, David. Proverbs and Zhi Zhong
This paper aims to clarify the resistance degree of group road logistics to flood disaster resilience. The paper measures the resilience of group road logistics by establishing…
Abstract
Purpose
This paper aims to clarify the resistance degree of group road logistics to flood disaster resilience. The paper measures the resilience of group road logistics by establishing network structure model. The purpose of this study is to improve the resilience of road log.
Design/methodology/approach
This paper adopts Delphi method to collect data, interviews mainly flood management experts and supply chain risk management experts, and then analyzes the data through the network structure model combined with interpretative structure model (ISM) and analytical network process (ANP).
Findings
The results show that flood frequency and drainage systems are the main factors affecting the resilience of road transport logistics in urban areas. These research results provide useful guidance for the effective planning and design of urban road construction and infrastructure.
Research limitations/implications
However, the main factors affecting the resilience of road transport logistics are likely to change with the development of factors such as climate, economy and environment. Therefore, in future work, the authors' research will focus on the further application of this evaluation method.
Practical implications
The results show that the impact of flooding on the four dimensions of road logistics resilience varies. This shows that in deciding what intervention measures are to be taken to improve the resilience of the road network to flooding, various measures need to be considered.
Social implications
This paper provides a more scientific analysis of the risk management ability of the road network in the face of floods. In addition, it also provides a useful reference for urban road planners.
Originality/value
This paper addresses a clear need to study how to build models to improve the resilience of road logistics in flood risk.
Details