Search results
1 – 10 of 440Gordon Pasiba Kombat and Xiaoqian Chen
Timber export is an important economic development pillar in Ghana, which has a direct effect on Ghana’s domestic forestry industry development, local communities’ income and…
Abstract
Purpose
Timber export is an important economic development pillar in Ghana, which has a direct effect on Ghana’s domestic forestry industry development, local communities’ income and sustainable forest management and deforestation. China, as the Ghana’s largest timber export destination, brought significant impacts on Ghana’s timber export. However, there is a lack of quantitative analyses on impact factors of timber trade between the two countries in the past, which this paper sought to do.
Design/methodology/approach
The authors first collected Ghana’s timber exports to China from 1997 to 2017, and then based on the literature review and trade theories, the authors set up a least squares estimate (LSE)-based multiple linear regression (MLR) model to analyse the specific impact factors. In addition, multi-collinearity, autocorrelation and heteroscedasticity issues of the impact factors were checked to guarantee the accuracy of the results.
Findings
The results showed China timber import volume, Ghana cedi (GHC)/US$ exchange rate, Ghana’s gross domestic product (GDP) and China timber consumption volume in construction sector had positive impacts; Ghana timber production volume and Ghana average timber export price had negative impacts. The results confirmed that China’s timber consumption had a positive linkage with Ghana’s timber export. The article also reviewed possible impacts caused by change in timber trade policies, which proved important but was hardly directly quantified. The authors pointed out the importance of optimizing these impact factors to make sure Ghana’s timber export to China went on the sustainable track.
Originality/value
There is no literature about timber trade and its impact factors between Ghana and China, which used econometric models. This paper provided new perspectives on the impact factors in timber trade between the two countries.
Details
Keywords
Hüseyin Emre Ilgın, Markku Karjalainen and Sofie Pelsmakers
This study examined data from 13 international tall residential timber building case studies to increase our understanding of the emerging global trends.
Abstract
Purpose
This study examined data from 13 international tall residential timber building case studies to increase our understanding of the emerging global trends.
Design/methodology/approach
Data were collected through literature surveys and case studies to examine the architectural, structural and constructional points of view to contribute to knowledge about the increasing high-rise timber constructions globally.
Findings
The main findings of this study indicated that: (1) central cores were the most preferred type 10 of core arrangements; (2) frequent use of prismatic forms with rectilinear plans and regular extrusions were identified; (3) the floor-to-floor heights range between 2.81 and 3.30 m with an average of 3 m; (4) the dominance of massive timber use over hybrid construction was observed; (5) the most used structural system was the shear wall system; (6) generally, fire resistance in primary and secondary structural elements exceeded the minimum values specified in the building codes; (7) the reference sound insulation values used for airborne and impact sounds had an average of 50 and 56 dB, respectively.
Originality/value
There is no study in the literature that comprehensively examines the main architectural and structural design considerations of contemporary tall residential timber buildings.
Details
Keywords
Margherita Lisco and Radhlinah Aulin
The reuse of timber building parts, when designing new buildings, has become a topic of increasing discussion as a proposed circular solution in support of sustainable development…
Abstract
Purpose
The reuse of timber building parts, when designing new buildings, has become a topic of increasing discussion as a proposed circular solution in support of sustainable development goals. Designers face the difficulty of identifying and applying different design strategies for reuse due to multiple definitions, which are used interchangeably. The purpose of this study is to propose a taxonomy to define the relationships between various concepts and practices that comprise the relevant strategies for reuse, notably design for disassembly (DfD) and design for adaptability (DfA).
Design/methodology/approach
Literature reviews were conducted based on research publications over the previous 12 years and located through the Web of Science and Scopus.
Findings
A taxonomy for the design process grounded on two strategies for reuse is presented: DfD and DfA. Based on previous work, the taxonomy aims to build a vocabulary of definitions in DfD and DfA to support other researchers and practitioners working in the field.
Research limitations/implications
The research is limited to the design phase of timber-based buildings. It does not take into account the other phases of the construction process, neither other kind of construction methods.
Practical implications
The application of the taxonomy can facilitate communication between different actors and provide a way for building product manufacturers to demonstrate their reuse credentials, enabling them to produce and promote compliant products and thereby support design for reuse strategies.
Social implications
This paper could contribute to a closer collaboration of all stakeholders involved in the building process since the very early phases of the conceptual design.
Originality/value
This paper contributes a comprehensive taxonomy to support the deployment of circular reuse strategies and assist designers and other stakeholders from the earliest of phases in the building’s life cycle. The proposed definition framework provided by the taxonomy resolves the longstanding lack of a supporting vocabulary for reuse and can be used as a reference for researchers and practitioners working with the DfD and DfA.
Details
Keywords
Caroline Emberson, Silvia Maria Pinheiro and Alexander Trautrims
The purpose of this paper is to examine how first-tier suppliers in multi-tier supply chains adapt their vertical and horizontal relationships to reduce the risk of slavery-like…
Abstract
Purpose
The purpose of this paper is to examine how first-tier suppliers in multi-tier supply chains adapt their vertical and horizontal relationships to reduce the risk of slavery-like practices.
Design/methodology/approach
Using Archer’s morphogenetic theory as an analytical lens, this paper presents case analyses adduced from primary and secondary data related to the development of relational anti-slavery supply capabilities in Brazilian–UK beef and timber supply chains.
Findings
Four distinct types of adaptation were found among first-tier suppliers: horizontal systemisation, vertical systemisation, horizontal transformation and vertical differentiation.
Research limitations/implications
This study draws attention to the socially situated nature of corporate action, moving beyond the rationalistic discourse that underpins existing research studies of multi-tier, socially sustainable, supply chain management. Cross-sector comparison highlights sub-country and intra-sectoral differences in both institutional setting and the approaches and outcomes of individual corporate actors’ initiatives. Sustainable supply chain management theorists would do well to seek out those institutional entrepreneurs who actively reshape the institutional conditions within which they find themselves situated.
Practical implications
Practitioners may benefit from adopting a structured approach to the analysis of the necessary or contingent complementarities between their, primarily economic, objectives and the social sustainability goals of other, potential, organizational partners.
Social implications
A range of interventions that may serve to reduce the risk of slavery-like practices in global commodity chains are presented.
Originality/value
This paper presents a novel analysis of qualitative empirical data and extends understanding of the agential role played by first-tier suppliers in global, multi-tier, commodity, supply chains.
Details
Keywords
Vojtěch Šálek, Kamila Cábová, František Wald and Milan Jahoda
The purpose of this paper is to present a complex pyrolysis computational fluid dynamics (CFD) model of timber protection exposed to fire in a medium size enclosure. An emphasis…
Abstract
Purpose
The purpose of this paper is to present a complex pyrolysis computational fluid dynamics (CFD) model of timber protection exposed to fire in a medium size enclosure. An emphasis is placed on rarely used temperature-dependent thermal material properties effecting the overall simulation outputs. Using the input dataset, a fire test model with oriented strand boards (OSB) in the room corner test facility is created in Fire Dynamics Simulator (FDS).
Design/methodology/approach
Seven FDS models comprising different complexity approaches to modelling the burning of wood-based materials, from a simplified model of burning based on a prescribed heat release rate to complex pyrolysis models which can describe the fire spread, are presented. The models are validated by the experimental data measured during a fire test of OSB in the room corner test facility.
Findings
The use of complex pyrolysis approach is recommended in real-scale enclosure fire scenarios with timber as a supplementary heat source. However, extra attention should be paid to burning material thermal properties implementation. A commonly used constant specific heat capacity and thermal conductivity provided poor agreement with experimental data. When the fire spread is expected, simplified model results should be processed with great care and the user should be aware of possible significant errors.
Originality/value
This paper brings an innovative and rarely used complex pyrolysis CFD model approach to predict the behaviour of timber protection exposed to fire. A study on different temperature-dependent thermal material properties combined with multi-step pyrolysis in the room corner test scenario has not been sufficiently published and validated yet.
Details
Keywords
Milad Shabanian and Nicole Leo Braxtan
Thermomechanical behavior of intermediate-size beam-to-wall assemblies including Glulam-beams connected to cross-laminated timber (CLT) walls with T-shape steel doweled…
Abstract
Purpose
Thermomechanical behavior of intermediate-size beam-to-wall assemblies including Glulam-beams connected to cross-laminated timber (CLT) walls with T-shape steel doweled connections was investigated at ambient temperature (AT) and after and during non-standard fire exposure.
Design/methodology/approach
Three AT tests were conducted to evaluate the load-carrying capacity and failure modes of the assembly at room temperature. Two post-fire performance (PFP) tests were performed to study the impact of 30-min (PFP30) and 60-min (PFP60) partial exposure to a non-standard fire on the residual strength of the assemblies. The assemblies were exposed to fire in a custom-designed frame, then cooled and loaded to failure. A fire performance (FP) test was conducted to study the fire resistance (FR) during non-standard fire exposure by simultaneously applying fire and a mechanical load equal to 65% of the AT load carrying capacity.
Findings
At AT, embedment failure of the dowels followed by splitting failure at the Glulam-beam and tensile failure of the epoxy between the layers of CLT-walls were the dominant failure modes. In both PFP tests, the plastic bending of the dowels was the only observed failure mode. The residual strength of the assembly was reduced 14% after 30 min and 37% after 60 min of fire exposure. During the FP test, embedment failure of timber in contact with the dowels was the only major failure mode, with the maximum rate of displacement at 51 min into the fire exposure.
Originality/value
This is the first time that the thermomechanical performance of such an assembly with a full-contact connection is presented.
Details
Keywords
Mervi Hamalainen and Asta Salmi
The purpose of this paper is to investigate two current transformation processes in the construction industry: the adoption of a novel material, cross-laminated timber (CLT), and…
Abstract
Purpose
The purpose of this paper is to investigate two current transformation processes in the construction industry: the adoption of a novel material, cross-laminated timber (CLT), and the enhancement of digital transformation. This paper depicts the actors and interaction in the business network that is emerging around CLT construction and, in particular, how digital transformation (that is, the deployment of Construction 4.0 solutions) occurs in this business network.
Design/methodology/approach
Digital transformation is a relatively new phenomenon in CLT construction, and the authors, therefore, adopt a qualitative inductive research approach and rely on semi-structured interviews.
Findings
The findings of this paper suggest that it is critical for actors to adopt an interorganizational perspective in CLT construction, instead of only focusing on internal operations. An interorganizational perspective supports successful CLT construction, as well as the deployment of Construction 4.0 solutions. This will bring about the benefits of digital transformation in the construction industry.
Research limitations/implications
This paper investigates the network created around CLT construction in Finland but more generally illustrates the change toward Construction 4.0 solutions.
Practical implications
For managers, this paper explicates the importance of networking, instead of focusing on the internal development of the company, when adopting novel solutions emerging from both construction and information technology-related advancements.
Originality/value
Stability and traditions are characteristic of the construction industry. New technical solutions and materials, together with calls for sustainability, have challenged the traditional ways of constructing, and for example, the development of CLT construction has led to an emergence of new business networks. This material-related process and the ongoing digital transformation of business form an interesting context for an empirical-based analysis of changing interaction and networks. This paper gives the first insights into how digital transformation can benefit the evolution of the network.
Details
Keywords
Abstract
Details
Keywords
Abstract
Details
Keywords
Abstract
Details