Search results

This paper aims to deal with a modified-based approach for the evaluation of the steady state performances of three-phase self-excited induction generator (SEIG) feeding single-phase load.

Using the symmetrical components method, the proposed approach is based on a modified model of unbalanced three-phase SEIG, which is formulated similarly to the well-known model of balanced three-phase SEIG. Owing to this modified model, the determination of the SEIG operating point amounts to the resolution of two semi-decoupled nonlinear equations for two unknowns; the magnetizing reactance and the per-unit frequency. A simple resolution method based on an iterative two-step technique is used. The results obtained by the proposed approach are compared with those given by a conventional approach and are validated experimentally.

The proposed approach is as accurate as the conventional approach. Further, for the same accuracy degree, the proposed approach permits to speed up the resolution when compared to the conventional approach, as only few iterations are required for the convergence. The proposed approach was also successfully used for the steady state analysis of SEIG under generalized unbalanced loading conditions.

The determination of the operating point of the generator is based on a modified model of the generator and a simple iterative resolution method. The calculation technique can be implemented on low resource controller to provide online voltage control of the SEIG.

The paper contains two main originalities. The first one consists in a modified formulation of the SEIG model under unbalanced loading conditions. The modified formulation permits the use of the well-known model of balanced three-phase SEIG. Unlike previous ones reported in the literature, the proposed model does not require tedious algebraic manipulations. The second originality is the use of two-step technique to solve the equations, which permits to avoid laborious mathematical derivations and manipulating high-order polynomials.

The paper aims to present an application of teaching learning-based optimization (TLBO) algorithm and static Var compensator (SVC) to improve the steady state and dynamic performance of self-excited induction generators (SEIG).

The TLBO algorithm is applied to generate the optimal capacitance to maintain rated voltage with different types of prime mover. For a constant speed prime mover, the TLBO algorithm attains the optimal capacitance to have rated load voltage at different loading conditions. In the case of variable speed prime mover, the TLBO methodology is used to obtain the optimal capacitance and prime mover speed to have rated load voltage and frequency. The SVC of fixed capacitor and controlled reactor is used to have a fine tune in capacitance value and control the reactive power. The parameters of SVC are obtained using the TLBO algorithm.

The whole system of three-phase induction generator and SVC are established under MatLab/Simulink environment. The performance of the SEIG is demonstrated on two different ratings (i.e. 7.5 kW and 1.5 kW) using the TLBO algorithm and SVC. An experimental setup is built-up using a 1.5 kW three-phase induction machine to confirm the theoretical analysis. The TLBO results are matched with other meta heuristic optimization techniques.

The paper presents an application of the meta-heuristic algorithms and SVC to analysis the steady state and dynamic performance of SEIG with optimal performance.

The purpose of the paper is to present an analysis of an influence of shape and material of rotor bars on the process of self-excitation and performance characteristics of single-phase, self-excited induction generator (SP-SEIG).

The presented analysis is based on the results of transient simulations of SP-SEIG performed with the use of field-circuit model of the machine. Four various shapes of the rotor bars and two different conductor materials were investigated. The results for the base model with rounded trapezoidal rotor slots were validated by measurements.

An improvement of the performance characteristics – the extension of the stable operating range of the generator – was obtained for rectangular copper rotor bars. The improvement is the result of strong skin effect in the squirrel rotor cage. Application of round rotor slots results in shorter time of voltage build-up during the self-excitation of the generator caused by less apparent deep bar effect in round bars.

The originality of the paper is the application of the copper rotor cage in the single-phase, self-excited induction generator. Its use is beneficial, as it allows for extension of the range of stable operating range. The results may be used for designing new constructions of the single-phase, self-excited induction generators, as well as the constructions based on general purpose single-phase induction motors.

When magnetic saturation in ac machines is evolved, the theory of main flux saturation in d-q axes remains the best. Because of its simplicity, it is the most used in either motoring or generating mode for synchronous or asynchronous machines. Although, it is considered as a global way of introducing the iron saturation, compared to other methods, today, its fidelity has no contest in predicting complex ac machine operations. For this purpose, the aims of this paper consists of modeling these machines whatever the state-space variables values are taking into account the magnetic saturation. Two unified procedures are proposed. The first one deals with a common approach to establishing a complete and detailed model synthesis in d-q axes. The second also presents a unified approach to introducing magnetic saturation of the iron core in the characteristic equations. The analysis takes the salient pole synchronous machine as a general case of study. Then the approaches are extended to undamped and smooth air gap synchronous machines as well as induction machines. The paper aims to discuss these issues.

The present paper, which is a first part of a work under study dealing with a unified method to derive multiple models of saturated ac machines, is intended to the description of an alternative method and its application for induction and synchronous machines. It mainly consists of the following parts: first, after writing the stator and rotor space vector d-q equations, the number of possible models is immediately discussed. By considering the currents and fluxes as state-space variables, 14 models are obtained for AC induction machine (IM and SM). They are classified into three families, current (three), flux (three) and mixed models (eight). Second, in order to easily introduce the magnetic saturation in the 14 developed models, a method is presented. It consists of just elaborating the model with the winding currents as state variables, then deriving all the other models from it. Third, to emphasize the influence of the presence of magnetic saturation, in each model, each inductance along the d and q axes is written with a fundamental expression which exists with or without saturation and an additional one due purely to saturation. Hence the additional terms can be studied and quantified in an easy way or simply removed when linear case is assumed. Fourth, adopting such strategy to write the different coefficients of the models had led to the definition of common saturation factors. In turn, the definition of common saturation factors had allowed the definition of different groups of models within each family. Fifth, an alternative to evaluate the static and dynamic saturation coefficients is also proposed. It is shown that by proper fitting of the experimental magnetizing curve, all saturation coefficients can be written only in terms of which is simply the magnitudes ratio of the magnetizing flux and current. Sixth, although the theory of the main flux saturation is now admitted, an investigation was carried out on a self-excited induction generator and the build-up of voltage and current phases of a standalone alternator, to prove the equivalence between the all developed models.

The number of models based on the state-space variables choice, of a saturated ac machine, is reviewed. A simple method consisting of elaborating just the winding currents model, with magnetic saturation and deriving all the other models from it, is presented. In this study special interest was particularly focussed on either novel models or existing models cited in the literature but cannot be obtained by other approaches. In all cases, if the differential equations of the machine are formulated in terms of a set of variables other than the winding currents, a noticeable reduction in the size of equations may be obtained and consequently less time computing. The approach seems to be able to derive any possible model whatever the state-space variables and the type of the ac machine and hence can be classified as a general approach.

The experiments of synchronous and induction machine transients prove the validity of the method.

By suitable choice of state-space characteristic vectors among the fluxes and the currents, a synthesis of AC machine models in d-q axes is established. To introduce magnetic saturation in each model, an approach-based uniquely on the elaboration of the winding currents model is exposed and applied. In addition, the analysis gives a detailed classification of all found models taking into account the state variables nature as well as the cross-coupling coefficient considered as a saturation factor. The study is completed with a simple alternative to evaluate all saturation factors by just calculating the static magnetizing inductance.

The purpose of this paper is to provide an analysis of the performance of a new five-phase doubly fed induction generator (DFIG).

This paper presents the results of a research work related to five-phase DFIG framing, including the development of an analytical model, FEM analysis as well as the results of laboratory tests of the prototype. The proposed behavioral level analytical model is based on the winding function approach. The developed DFIG model was used at the design stage to simulate the generator’s no-load and load state. Then, the results of the FEM analysis were shown and compared with the results of laboratory tests of selected DFIG operating states.

The paper provides the results of analytical and FEM simulation and measurement tests of the new five-phase dual-feed induction generator. The use of the MATLAB Simscape modeling language allows for easy and quick implementation of the model. Design assumptions and analytical model-based analysis have been verified using FEM analysis and measurements performed on the prototype. The results of the presented research validate the design process as well as show the five-phase winding design advantage over the three-phase solution regarding the control winding power quality.

The main disadvantage of the winding function approach-based model development is the simplification regarding omitting the tangential airgap flux density component. However, this fault only applies to large airgap machines and is insignificant in induction machines. The results of the DFIG analyses were limited to the basic operating states of the generator, i.e. the no-load state, the inductive and resistive load.

The novel DFIG with five phase rotor control winding can operate as a regular three-phase machine in an electric power generation system and allows for improved control winding power quality of the proposed electrical energy generation system. This increase in power quality is due to the rotor control windings inverter-based PWM supply voltage, which operates with a wider per-phase supply voltage range than a three-phase system. This phenomenon was quantified using control winding current harmonic analysis.

The paper provides the results of analytical and FEM simulation and measurement tests of the new five-phase dual-feed induction generator.

The power electronic converter is used for the satisfaction of reactive power demand of induction generator, when grid-tied. This paper aims to present an application of STATCOM to reduce inrush transient caused by the connection of a squirrel-cage induction generator (SCIG) to the grid.

The power generation system consists of an uncontrolled prime mover, a SCIG and a power electronic converter connected to the grid. The three-phase Neutral Point Clamped (NPC) converter works as a STATCOM to satisfy a reactive power demand of the generator. A control scheme of STATCOM uses the x-y reference frame rotating synchronously with grid voltage vector and the p-q instantaneous power theory to calculate q component of grid power.

It is shown that the parallel converter, which works as a reactive power compensator allows decreasing transients during a grid connection of the induction generator.

Transients during a grid connection of the induction generator are only partially decreased.

It is needed to compensate for the reactive power of a SCIG. The NPC converter works as a STATCOM. The converter partially reduces grid transients during generator connection. The laboratory tests are demonstrated by connection 7.5 kW induction generator to 8 kVA transformer.

The paper presents the mitigation of grid transients during connection of induction generator with the power electronic converter working as reactive power compensator.

The purpose of this paper is to present analysis of an influence of rotor slots opening on self-excitation process, terminal voltage and performance characteristics of the single-phase self-excited induction generator (SPSEIG).

The paper presents field analysis of the self-excitation problem in the SPSEIG and performance characteristics on the base of two-dimensional field-circuit model of the generator.

The carried out field computations of the tested SPSEIG with closed rotor slots showed that only an initial voltage across the excitation capacitor of about nominal value (230 V) causes successful self-excitation of the generator. It was also proved that the suitable opening of the rotor slots, beside remnant flux density in the rotor core, facilitates self-excitation in the generator. Since in working applications initially charging of the capacitor to almost nominal voltage may cause a problem, therefore employment of semi-closed rotor slots in the SPSEIG would be proper solution.

The conducted simulations, validated by laboratory tests showed that not only suitable excitation capacitor capacitance and rotor speed are needed to obtain desired terminal voltage of the generator, but also suitable initial voltage across the capacitor in auxiliary stator winding is very important and necessary for reliable self-excitation of the single-phase induction generator with closed rotor slots. The employment of semi-closed rotor slots in the SPSEIG makes the self-excitation more effective.

Wind energy has matured to a level of development at which it is ready to become a generally accepted power generation technology. The aim of this paper is to provide a brief review of the state of the art in the area of electrical machines and power‐electronic systems for high‐power wind energy generation applications. As the first part of this paper, latest market penetration, current technology and advanced electrical machines are addressed.

After a short description of the latest market penetration of wind turbines with various topologies globally by the end of 2010 is provided, current wind power technology, including a variety of fixed‐ and variable‐speed (in particular with doubly‐fed induction generator (DFIG) and permanent magnet synchronous generator (PMSG) supplied with partial‐ and full‐power converters, respectively) wind power generation systems, and modern grid codes, is presented. Finally, four advanced electrical‐machine systems, viz., brushless DFIG, open winding PMSG, dual/multi 3‐phase stator‐winding PMSG and magnetic‐gear outer‐rotor PMSG, are identified with their respective merits and challenges for future high‐power wind energy applications.

For the time being, the gear‐drive DFIG‐based wind turbine is significantly dominating the markets despite its defect caused by mechanical gears, slip rings and brush sets. Meanwhile, direct‐drive synchronous generator, especially utilizing permanent magnets on its rotor, supplied with a full‐capacity power converter has become a more effective solution, particularly in high‐power offshore wind farm applications.

This first part of the paper reviews the latest market penetration of wind turbines with a variety of mature topologies, by summarizing their advantages and disadvantages. Four advanced electrical‐machine systems are selected and identified by distinguishing their respective merits and challenges for future high‐power wind energy applications.

The purpose of this paper is to develop and test a prototype of the dual stator‐winding induction generator (DWIG) and its dynamic model to verify the validity of this machine design as variable speed generator for renewable energy systems.

Implementation and laboratory test of a DWIG prototype. Analysis and simulation of the developed DWIG model.

The proposed DWIG makes a better use of energy than a squirrel cage induction generator (SCIG) in variable speed applications. The performance of DWIG with a bidirectional converter is very similar to those described in other studies with brushless doubly‐fed induction generators.

The results can be used to test different control techniques and to analyse the dynamic performance of DWIG‐converter system in variable load and speed conditions.

The stator winding design does not involve a significant increase in the complexity of the machine assembly and cost of this induction machine.

The time‐stepping finite element method for the analysis of the electromagnetic transients in the induction generator working in isolation has been presented. The transients in three phase squirrel‐cage generator connected in parallel with capacitors have been investigated. The field and the circuit equations of the considered system have been solved simultaneously. The proposed method has been successfully applied for the analysis of the transient and steady states in the 3 kW induction machine. The results of calculation have been compared with the experimental results.