Search results

The purpose of this study is to model and solve numerically the three-dimensional off-centered stagnation point flow and heat transfer of magnesium oxide–silver/water hybrid nanofluid impinging to a spinning disk.

The applied effective thermophysical properties of hybrid nanofluid including thermal conductivity and dynamics viscosity are according to the reported experimental relations that would be expanded by a mass-based algorithm. The single phase formulations coupled with experimental-based hybrid nanofluid model is implemented to derive the governing partial differential equations which are then transferred to a set of dimensionless ordinary differential equations (ODEs) with the use of the similarity transformation method. Afterward, the reduced ODEs are solved numerically by bvp4c function from MATLAB that is a trustworthy and efficient code according to three-stage Lobatto IIIa formula.

The effect of spinning parameter and nanoparticles masses (m_MgO, m_Ag) on the hydrodynamics and thermal boundary layers behavior and also the quantities of engineering interest are presented in tabular and graphical forms. The recent work demonstrates that the analysis of flow and heat transfer becomes more complicated when there is a non-alignment between the impinging flow and the disk axes. From computational results demonstrate that, the radial and azimuthal velocities are, respectively, the increasing and decreasing functions of the disk spinning parameter. Further, for the greater values of the spinning parameter, an overshoot of the radial velocity owing to the centrifugal forces of the spinning disk is observed. Besides, the quantities of engineering interest gently enhance with first and second nanoparticle masses, while comparing their absolute values illustrates the fact that the effect of second nanoparticle mass (m_Ag) is greater. Further, it is inferred that the second nanoparticle’s mass enhancement results in the amplification of the heat transfer; although, the high skin friction and the relevant shear stress should be controlled.

The combination of experimental thermophysical properties with theoretical modeling of the problem can be the novelty of the present work. It is evident that the experimental relations of effective thermophysical properties can be trustable and flexible in the theoretical/mathematical modeling of hybrid nanofluids flows. Besides, to the best of the authors’ knowledge, no one has ever attempted to study the present problem through a mass-based model for hybrid nanofluid.

The purpose of this paper is to study the three dimensional, steady and incompressible flow of non-Newtonian rate type Maxwell fluid, for stagnation point flow toward an off-centered rotating disk.

The governing partial differential equations are transformed to a system of non-linear ordinary differential equations by conventional similarity transformations. The non-perturbation technique, homotopy analysis method (HAM) is employed for the computation of solutions. And, the solution is computed by using the well-known software Mathematica 10.

The effects of rotational parameter and Deborah number on radial, azimuthal and induced velocity functions are investigated. The results are presented in graphical form. The convergence control parameter is also plotted for velocity profiles. The comparison with the previous results is also tabulated. The skin friction coefficients are also computed for different values of Deborah number.

This paper studies the effect of rotation and Deborah number on off-centered rotating disk has been observed and presented graphically.

Heat treatment by quenching of individual metallic parts with multiple impinging gas jets is an environmentally friendly alternative to conventional surface hardening and quenching in liquids. In the present investigation the gas flow field and simultaneous heat transfer process in gas quenching is studied by numerical simulation for surface treatment of a cylindrical sample geometry. Aim of the investigation is the evaluation of optimized flow conditions and nozzle arrangements to achieve: a maximum overall heat release (high integral heat transfer rates) to maximize the quenching efficiency; a local smooth distribution of the cooling process (spatially homogeneous heat transfer) for avoidance of spatial hardness variations. These aims are achieved by derivation of an optimized nozzle arrangement and appropriate operation conditions of the gas jet array with respect to the three dimensional sample geometry of a cylinder to be quenched.

The purpose of this paper is to do a comprehensive study on the unsteady general three-dimensional stagnation-point flow and heat transfer of a nanofluid by Buongiorno’s model.

In this study, the convective transport equations include the effects of Brownian motion and thermophoresis. By introducing new similarity transformations for velocity, temperature and nanoparticle volume fraction, the basic equations governing the flow, heat and mass transfer are reduced into highly non-linear ordinary differential equations. The resulting non-linear system has been solved both analytically and numerically.

The analysis shows that velocity, temperature and nanoparticle concentration profiles in the respective boundary layers depend on five parameters, namely unsteadiness parameter A, Brownian motion parameter Nb, thermophoresis parameter Nt, Prandtl number Pr and Lewis number Le. It is found that the thermal boundary layer thickens with a rise in both of the Brownian motion and the thermophoresis effects. Therefore, similar to the earlier reported results, the Nusselt number decreases as the Brownian motion and thermophoresis effects become stronger. A correlation for the Nusselt number has been developed based on a regression analysis of the data. This correlation predicts the numerical results with a maximum error of 9 percent for a usual domain of the physical parameters.

The stagnation point flow toward a wavy cylinder (with nodal and saddle stagnation points) that a little attention has been given to it up to now. The examination of unsteadiness effect on the general three-dimensional stagnation-point flow. The application of an interesting and global model (Boungiorno’s model) for the nanofluid that incorporates the effects of Brownian motion and thermophoresis. The study of the effects of Brownian motion and thermophoresis on the nanofluid flow, heat and mass transfer characteristics. The prediction of correlation for the Nusselt number based on a regression analysis of the data. General speaking, we can tell the problem with this geometry, characteristics, the applied model, and comprehensive results, was Not studied and analyzed in literature up to now.

The evaluation of high thermal efficiency has actively highlighted the unique behaviour of hybrid nanofluid. Thus, the purpose of this paper is to emphasize the hybrid nanofluid’s stagnation point in three-dimensional flow with magnetic field.

The defined ordinary differential equations systems are addressed using the bvp4c solver.

The results indicate that using dual solutions is possible as long as the physical parameters remain within their specified ranges. Hybrid nanofluid flow has been recognised for its superior heat transfer capabilities in comparison to both viscous flow and nanofluid flow. Furthermore, it has been demonstrated in the current study that augmenting the volume concentration of nanoparticles leads to a corresponding enhancement in the rate of heat transfer. When the velocity gradients ratio is augmented, there is a corresponding reduction in the thermal performance. The separation value grows as the magnetic parameter rises, which signifies the expansion of the boundary layer.

The originality of the paper highlights the general mathematical hybrid model of the three-dimensional problem with the magnetohydrodynamics (MHD) effect in the stagnation point flow. The comprehensive examination of the suggested model has not yet been thoroughly addressed in prior research.

This paper aims to present a high-order algorithm implemented with the modal spectral element method and simulations of three-dimensional thermal convective flows by using the full viscous dissipation function in the energy equation. Three benchmark problems were solved to validate the algorithm with exact or theoretical solutions. The heated rotating sphere at different temperatures inside a cold planar Poiseuille flow was simulated parametrically at varied angular velocities with positive and negative rotations.

The fourth-order stiffly stable schemes were implemented and tested for time integration. To provide the hp-refinement and spatial resolution enhancement, a modal spectral element method using hierarchical basis functions was used to solve governing equations in a three-dimensional space.

It was found that the direction of rotation of the heated sphere has totally different effects on drag, lateral force and torque evaluated on surfaces of the sphere and walls. It was further concluded that the angular velocity of the heated sphere has more influence on the wall normal velocity gradient than on the wall normal temperature gradients and therefore, more influence on the viscous dissipation than on the thermal dissipation.

This paper concerns incompressible fluid flow at constant properties with up to medium temperature variations in the absence of thermal radiation and ignoring the pressure work.

This paper contributes a viable high-order algorithm in time and space for modeling convective heat transfer involving an internal heated rotating sphere with the effect of viscous heating.

Results of this paper could provide reference for related topics such as enhanced heat transfer forced convection involving rotating spheres and viscous thermal effect.

The merits include resolving viscous dissipation and thermal diffusion in stationary and rotating boundary layers with both h- and p-type refinements, visualizing the viscous heating effect with the full viscous dissipation function in the energy equation and modeling the forced advection around a rotating sphere with varied positive and negative angular velocities subject to a shear flow.

The purpose of this paper is to know the influence of heat generation/absorption and slip effects on heat and mass transfer flow of carbon nanotubes – water-based nanofluid over a rotating disk. Two types of carbon nanotubes, single and multi-walled, are considered in this analysis.

The non-dimensional system of governing equations is constructed using compatible transformations. These equations together with boundary conditions are solved numerically by using the most prominent Finite element method. The influence of various pertinent parameters such as magnetic parameter (0.4 – 1.0), nanoparticle volume fraction parameter (0.1 – 0.6), porosity parameter (0.3 – 0.6), radiation parameter (0.1 – 0.4), Prandtl number (2.2 – 11.2), space-dependent (−3.0 – 3.0), temperature-dependent (−3.0 – 1.5), velocity slip parameter (0.1 – 1.0), thermal slip parameter (0.1 – 0.4) and chemical reaction parameter (0.3 – 0.6) on nanofluids velocity, temperature and concentration distributions, as well as rates of velocity, temperature and concentration is calculated and the results are plotted through graphs and tables. Also, a comparative analysis is carried out to verify the validation of the present numerical code and found good agreement.

The results indicate that the temperature of the fluid elevates with rising values of nanoparticle volume fraction parameter. Furthermore, the rates of heat transfer rise from 4.8% to 14.6% when carbon nanotubes of 0.05 volume fraction are suspended into the base fluid.

The work carried out in this analysis is original and no part is copied from other sources.

A laminar swirling jet impinging on to an adiabatic solid wall is investigated. The flow field is computed and entropy analysis is carried out for different flow configurations. The numerical scheme employing a control volume approach is introduced when solving the governing equations of flow and energy. In order to examine the effect of the nozzle exit velocity profile and the swirling velocity on the flow field and entropy generation rate, six nozzle exit velocity profiles and four swirl velocities are considered. It is found that the influence of swirl velocity on the flow field is more pronounced as the velocity profile number reduces. In this case, two circulation cells are generated in the flow field. The total entropy generation increases with increasing swirl velocity for low velocity profile numbers. The Merit number improves for low swirling velocity and high velocity profile numbers.

The purpose of this paper is to investigate a three-dimensional boundary layer flow with considering heat and mass transfer on a nonlinearly stretching sheet by using a novel operational-matrix-based method.

The partial differential equations that governing the problem are converted into the system of nonlinear ordinary differential equations (ODEs) with considering suitable similarity transformations. A direct numerical method based on the operational matrices of integration and product for the linear barycentric rational basic functions is used to solve the nonlinear system of ODEs.

Graphical and tabular results are provided to illustrate the effect of various parameters involved in the problem on the velocity profiles, temperature distribution, nanoparticle volume fraction, Nusselt and Sherwood number and skin friction coefficient. Comparison between the obtained results, numerical results based on the Maple's dsolve (type = numeric) command and previous existing results affirms the efficiency and accuracy of the proposed method.

The motivation of the present study is to provide an effective computational method based on the operational matrices of the barycentric cardinal functions for solving the problem of three-dimensional nanofluid flow with heat and mass transfer. The convergence analysis of the presented scheme is discussed. The benefit of the proposed method (PM) is that, without using any collocation points, the governing equations are converted to the system of algebraic equations.

The current study is mainly motivated by the need to the development of the transient MHD mixed convection stagnation-point flow and heat transfer of an electrically conducting nanofluid over a vertical permeable stretching/shrinking sheet by means of Tiwari-Das nanofluid model. The purpose of this paper is to investigate the effects of the parameters governing the flow i.e. the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter and the velocity ratio parameter on dimensionless velocity and temperature distributions, skin friction coefficient and local Nusselt number.

The mathematical model has been formulated based on Tiwari-Das nanofluid model. Three different types of water-based nanofluid with copper, aluminum oxide (alumina) and titanium dioxide (titania) as nanoparticles are considered in this investigation. Using appropriate similarity variables, the governing equations are transformed into nonlinear ordinary differential equations in the dimensionless stream function, which is solved analytically by the well-know homotopy analysis method. The present simulations agree closely with the previous studies in the especial cases.

The results show that by increasing the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter or reducing the velocity ratio parameter, the skin friction coefficient enhances. Furthermore, the local Nusselt number enhances with different rates by increasing the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter and the velocity ratio parameter. Besides, the skin friction coefficient and the local Nusselt number are highest for copper-water nanofluid compared to the alumina-water and titania-water nanofluids.

Tiwari-Das nanofluid model has not been applied for the flow with these characteristics as mentioned in the paper. A comprehensive survey on boundary layer behavior has been presented. There are few studies regarding as analysis on thermal and hydrodynamics boundary layer. All plots presented in the paper are new and did not report in any other study. The effects of the parameters governing the flow on skin friction coefficient and local Nusselt number have been illustrated in the paper while there are some conflicts with previous published article that have been interpreted in details in the paper.