Search results

The purpose of this study is to propose a simplifying approach for modelling a reliability test. Modelling the reliability tests of printed circuit board (PCB)/microelectronic component assemblies requires the adoption of several simplifying assumptions. This study introduces and validates simplified assumptions for modeling a four-point bend test on a PCB/wafer-level chip scale packaging assembly.

In this study, simplifying assumptions were used. These involved substituting dynamic imposed displacement loading with an equivalent static loading, replacing the spherical shape of the interconnections with simplified shapes (cylindrical and cubic) and transitioning from a three-dimensional modelling approach to an equivalent two-dimensional model. The validity of these simplifications was confirmed through both quantitative and qualitative comparisons of the numerical results obtained. The maximum principal plastic strain in the solder balls and copper pads served as the criteria for comparison.

The simplified hypotheses were validated through quantitative and qualitative comparisons of the results from various models. Consequently, it was determined that the replacement of dynamic loading with equivalent static loading had no significant impact on the results. Similarly, substituting the spherical shape of interconnections with an equivalent shape and transitioning from a three-dimensional approach to a two-dimensional one did not substantially affect the precision of the obtained results.

This study serves as a valuable resource for researchers seeking to model accelerated reliability tests, particularly in the context of four-point bending tests. The results obtained in this study will assist other researchers in streamlining their numerical models, thereby reducing calculation costs through the utilization of the simplified hypotheses introduced and validated herein.

This study aims to design and validate a theoretical model for capacitive imaging (CI) sensors that incorporates the interelectrode shielding and surrounding shielding electrodes. Through experimental verification, the effectiveness of the theoretical model in evaluating CI sensors equipped with shielding electrodes has been demonstrated.

The study begins by incorporating the interelectrode shielding and surrounding shielding electrodes of CI sensors into the theoretical model. A method for deriving the semianalytical model is proposed, using the renormalization group method and physical model. Based on random geometric parameters of CI sensors, capacitance values are calculated using both simulation models and theoretical models. Three different types of CI sensors with varying geometric parameters are designed and manufactured for experimental testing.

The study’s results indicate that the errors of the semianalytical model for the CI sensor are predominantly below 5%, with all errors falling below 10%. This suggests that the semianalytical model, derived using the renormalization group method, effectively evaluates CI sensors equipped with shielding electrodes. The experimental results demonstrate the efficacy of the theoretical model in accurately predicting the capacitance values of the CI sensors.

The theoretical model of CI sensors is described by incorporating the interelectrode shielding and surrounding shielding electrodes into the model. This comprehensive approach allows for a more accurate evaluation of the detecting capability of CI sensors, as well as optimization of their performance.

In the COVID-19 era, sign language (SL) translation has gained attention in online learning, which evaluates the physical gestures of each student and bridges the communication gap between dysphonia and hearing people. The purpose of this paper is to devote the alignment between SL sequence and nature language sequence with high translation performance.

SL can be characterized as joint/bone location information in two-dimensional space over time, forming skeleton sequences. To encode joint, bone and their motion information, we propose a multistream hierarchy network (MHN) along with a vocab prediction network (VPN) and a joint network (JN) with the recurrent neural network transducer. The JN is used to concatenate the sequences encoded by the MHN and VPN and learn their sequence alignments.

We verify the effectiveness of the proposed approach and provide experimental results on three large-scale datasets, which show that translation accuracy is 94.96, 54.52, and 92.88 per cent, and the inference time is 18 and 1.7 times faster than listen-attend-spell network (LAS) and visual hierarchy to lexical sequence network (H2SNet) , respectively.

In this paper, we propose a novel framework that can fuse multimodal input (i.e. joint, bone and their motion stream) and align input streams with nature language. Moreover, the provided framework is improved by the different properties of MHN, VPN and JN. Experimental results on the three datasets demonstrate that our approaches outperform the state-of-the-art methods in terms of translation accuracy and speed.

Abnormal vibrations often occur in the liquid oxygen kerosene transmission pipelines of rocket engines, which seriously threaten their safety. Improper handling can result in failed rocket launches and significant economic losses. Therefore, this paper aims to examine vibrations in transmission pipelines.

In this study, a three-dimensional high-pressure pipeline model composed of corrugated pipes, multi-section bent pipes, and other auxiliary structures was established. The fluid–solid coupling method was used to analyse vibration characteristics of the pipeline under various external excitations. The simulation results were visualised using MATLAB, and their validity was verified via a thermal test.

In this study, the vibration mechanism of a complex high-pressure pipeline was examined via a visualisation method. The results showed that the low-frequency vibration of the pipe was caused by fluid self-excited pressure pulsation, whereas the vibration of the engine system caused a high-frequency vibration of the pipeline. The excitation of external pressure pulses did not significantly affect the vibrations of the pipelines. The visualisation results indicated that the severe vibration position of the pipeline thermal test is mainly concentrated between the inlet and outlet and between the two bellows.

The results of this study aid in understanding the causes of abnormal vibrations in rocket engine pipelines.

The causes of different vibration frequencies in the complex pipelines of rocket engines and the propagation characteristics of external vibration excitation were obtained.

Accurately evaluating fluid flow behaviors and determining permeability for deforming porous media is time-consuming and remains challenging. This paper aims to propose a novel machine-learning method for the rapid estimation of permeability of porous media at different deformation stages constrained by hydro-mechanical coupling analysis.

A convolutional neural network (CNN) is proposed in this paper, which is guided by the results of finite element coupling analysis of equilibrium equation for mechanical deformation and Boltzmann equation for fluid dynamics during the hydro-mechanical coupling process [denoted as Finite element lattice Boltzmann model (FELBM) in this paper]. The FELBM ensures the Lattice Boltzmann analysis of coupled fluid flow with an unstructured mesh, which varies with the corresponding nodal displacement resulting from mechanical deformation. It provides reliable label data for permeability estimation at different stages using CNN.

The proposed CNN can rapidly and accurately estimate the permeability of deformable porous media, significantly reducing processing time. The application studies demonstrate high accuracy in predicting the permeability of deformable porous media for both the test and validation sets. The corresponding correlation coefficients (R²) is 0.93 for the validation set, and the R² for the test set A and test set B are 0.93 and 0.94, respectively.

This study proposes an innovative approach with the CNN to rapidly estimate permeability in porous media under dynamic deformations, guided by FELBM coupling analysis. The fast and accurate performance of CNN underscores its promising potential for future applications.

In recent years, there has been significant interest in adopting XR (extended reality) technologies such as VR (virtual reality) and AR (augmented reality), particularly in retail. However, extending activities through reality-mediation is still mostly believed to offer an inferior experience due to their shortcomings in usability, wearability, graphical fidelity, etc. This study aims to address the research gap by experimentally examining the acceptance of metaverse shopping.

This study conducts a 2 (VR: with vs. without) × 2 (AR: with vs. without) between-subjects laboratory experiment involving 157 participants in simulated daily shopping environments. This study builds a physical brick-and-mortar store at the campus and stocked it with approximately 600 products with accompanying product information and pricing. The XR devices and a 3D laser scanner were used in constructing the three XR shopping conditions.

Results indicate that XR can offer an experience comparable to, or even surpassing, traditional shopping in terms of its instrumental and hedonic aspects, regardless of a slightly reduced perception of usability. AR negatively affected perceived ease of use, while VR significantly increased perceived enjoyment. It is surprising that the lower perceived ease of use appeared to be disconnected from the attitude toward metaverse shopping.

This study provides important experimental evidence on the acceptance of XR shopping, and the finding that low perceived ease of use may not always be detrimental adds to the theory of technology adoption as a whole. Additionally, it provides an important reference point for future randomized controlled studies exploring the effects of technology on adoption.

Recently, physical crafting has been found to positively affect emotional exhaustion through workload. However, the role of cognitive crafting in this process remains unexamined. To address this research gap, this study examined the relationship between cognitive crafting and emotional exhaustion, as well as whether cognitive crafting moderates the positive indirect effects of physical crafting on emotional exhaustion through workload.

The data were collected through an Internet survey conducted with 2,143 Japanese employees, and path regression analysis was conducted to analyze the data.

The results show that cognitive crafting was negatively correlated with emotional exhaustion, weakened the relationship between workload and emotional exhaustion and weakened the indirect effects of physical crafting on emotional exhaustion.

The practical implications of these findings suggest that practitioners should encourage the improvement of cognitive crafting. Implementation of job crafting interventions and customer participation could be effective in enhancing cognitive crafting.

The study provides a deeper understanding of how cognitive crafting influences emotional exhaustion and how it influences the process through which physical crafting influences emotional exhaustion, aligning with the transactional model. The results reiterate the importance of cognitive crafting, an aspect that has received little attention since the introduction of the job demands-resources (JD-R) model of job crafting.

The purpose of this paper is to construct an event-triggered finite-time fault-tolerant formation tracking controller, which can achieve a time-varying formation control for multiple unmanned aerial vehicles (UAVs) during actuator failures and external perturbations.

First, this study developed the formation tracking protocol for each follower using UAV formation members, defining the tracking inaccuracy of the UAV followers’ location. Subsequently, this study designed the multilayer event-triggered controller based on the backstepping method framework within finite time. Then, considering the actuator failures, and added self-adaptive thought for fault-tolerant control within finite time, the event-triggered closed-loop system is subsequently shown to be a finite-time stable system. Furthermore, the Zeno behavior is analyzed to prevent infinite triggering instances within a finite time. Finally, simulations are conducted with external disturbances and actuator failure conditions to demonstrate formation tracking controller performance.

It achieves improved performance in the presence of external disturbances and system failures. Combining limited-time adaptive control and event triggering improves system stability, increase robustness to disturbances and calculation efficiency. In addition, the designed formation tracking controller can effectively control the time-varying formation of the leader and followers to complete the task, and by adding a fixed-time observer, it can effectively compensate for external disturbances and improve formation control accuracy.

A formation-following controller is designed, which can handle both external disturbances and internal actuator failures during formation flight, and the proposed method can be applied to a variety of formation control scenarios and does not rely on a specific type of UAV or communication network.

The development of information technologies has led to a considerable transformation in human resource management from conventional or commonly known as personnel management to modern one. Data mining technology, which has been widely used in several applications, including those that function on the web, includes clustering algorithms as a key component. Web intelligence is a recent academic field that calls for sophisticated analytics and machine learning techniques to facilitate information discovery, particularly on the web. Human resource data gathered from the web are typically enormous, highly complex, dynamic, and unstructured. Traditional clustering methods need to be upgraded because they are ineffective. Standard clustering algorithms are enhanced and expanded with optimization capabilities to address this difficulty by swarm intelligence, a subset of nature-inspired computing. We collect the initial raw human resource data and preprocess the data wherein data cleaning, data normalization, and data integration takes place. The proposed K-C-means-data driven cuckoo bat optimization algorithm (KCM-DCBOA) is used for clustering of the human resource data. The feature extraction is done using principal component analysis (PCA) and the classification of human resource data is done using support vector machine (SVM). Other approaches from the literature were contrasted with the suggested approach. According to the experimental findings, the suggested technique has extremely promising features in terms of the quality of clustering and execution time.

This study investigates the impact of corporate social responsibility (CSR) on corporate innovation. We selected the listed nonfinancial firms of South Asian Economies. The sample of the study comprised a total of 426 listed manufacturing firms of South Asian Countries for period spans 10 years from 2012 to 2021. In this study, descriptive statistics, multicollinearity diagnostic tests, correlation analysis and two-step dynamic panel system generalized method of moments (GMM) were applied to analyze the data. CSR measured with three proxies' social indicators, environmental indicators, and CSR composite index of social and environmental indicators. However, corporate innovation is captured with number of citations received in a year and number of patents filed in the year. Overall, findings of the study using all measures of CSR shows that CSR significantly and positively related with corporate innovation. Our results find support for CSR-innovation view with all measures of CSR. The findings suggest that the current study is helpful for managers, regulators, policymakers, and researchers. For managers, the study helps them to make the CSR and innovation decision. The policymakers should take appropriate innovative decision while considering factors such as CSR. This study can also be extended by considering this study for developed and emerging economies sample.