Search results

The long-span continuous rigid-frame bridges are commonly constructed by the section-by-section symmetrical balance suspension casting method. The deflection of these bridges is increasing over time. Wet joints are a typical construction feature of continuous rigid-frame bridges and will affect their integrity. To investigate the sensitivity of shear surface quality on the mechanical properties of long-span prestressed continuous rigid-frame bridges, a large serviced bridge is selected for analysis.

Its shear surface is examined and classified using the damage measuring method, and four levels are determined statistically based on the core sample integrity, cracking length and cracking depth. Based on the shear-friction theory of the shear surface, a 3D solid element-based finite element model of the selected bridge is established, taking into account factors such as damage location, damage number and damage of the shear surface. The simulated results on the stress distribution of the local segment, the shear surface opening and the beam deflection are extracted and analyzed.

The findings indicate that the main factors affecting the ultimate shear stress and shear strength of the shear surface are size, shear reinforcements, normal stress and friction performance of the shear surface. The connection strength of a single or a few shear surfaces decreases but with little effect on the local stress. Cracking and opening mainly occur at the 1/4 span. Compared with the rigid “Tie” connection, the mid-span deflection of the main span increases by 25.03% and the relative deflection of the section near the shear surface increases by 99.89%. However, when there are penetrating cracks and openings in the shear surface at the 1/2 span, compared with the 1/4 span position, the mid-span deflection of the main span and the relative deflection of the cross-section increase by 4.50%. The deflection of the main span increases with the failure of the shear surface.

These conclusions can guide the analysis of deflection development in long-span prestressed continuous rigid-frame bridges.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

The purpose of this study is to reveal the mechanism of humble leadership inducing abusive supervision from the low-status compensation perspective, examining the mediation role of leader perceived thread to status. Besides, the moderation effect of regulatory focus on the mediation path is discussed.

This study conducted a three-wave longitudinal survey. The data was collected from 438 leaders and their employees in five Chinese enterprises. This study used Mplus 7.4 and adopted a bootstrapping technique for data analysis.

Humble leadership has a positive effect on leader perceived threat to status. Leader perceived threat to status plays a mediation role between humble leadership and leader abusive supervision. Leader regulatory focus is the “gate valve” that humble leadership fosters leader abusive supervision. That is, when the leader promotion focus is high, leader perceived threat to status bred by humble leadership is low, resulting in less abusive supervision. When the leader prevention focus is high, humble leadership brings relatively more abusive supervision through perceived threat to status.

This study explores why humble leadership breeds abusive supervision behaviors and reveals the mechanism behind the negative effect of humble leadership based on low-status compensation theory. This study not only promotes the continuous development of the field of humble leadership research through empirical research but also provides guidance for effectively suppressing the negative effects of humble leadership, promoting strengths and avoiding weaknesses and suppressing inappropriate management behaviors in management practice.

The purpose of this study is to determine whether COVID-19 had an impact on the brand equity of the Top 100 global brands in the Americas, European and Asian regions over the three years of assessment (2020–2022).

A secondary data method (document scanning) was used to gather the study’s data from Brand Finance’s Global 500 annual reports from 2019 to 2022. The data for this study was analysed using the IBM Statistical Package for Social Science (SPSS) Statistics for Windows, Version 26.0. The data were subjected to a descriptive test and one-way analysis of variance.

The findings showed that most of the Top 100 global brands from the Americas, Europe and Asia experienced little or no impact due to COVID-19. Thus, no significant differences were found to exist among the Top 100 global regional brands due to COVID-19 in the years 2020 and 2021. However, there is a significant difference in 2022 due to its small effect size.

The findings of this paper contribute to brand equity literature and global branding literature in the context of COVID-19. This paper innovatively frames brand equity and provides guidelines to help brands sustain their financial-based brand equity during a worldwide crisis.

In pursuit of affordable and nutrient-rich food alternatives, the symbiotic culture of bacteria and yeast (SCOBY) emerged as a selected food ink for 3D printing. The purpose of this paper is to harness SCOBY’s potential to create cost-effective and nourishing food options using the innovative technique of 3D printing.

This work presents a comparative analysis of the printability of SCOBY with blends of wheat flour, with a focus on the optimization of process variables such as printing composition, nozzle height, nozzle diameter, printing speed, extrusion motor speed and extrusion rate. Extensive research was carried out to explore the diverse physical, mechanical and rheological properties of food ink.

Among the ratios tested, SCOBY, with SCOBY:wheat flour ratio at 1:0.33 exhibited the highest precision and layer definition when 3D printed at 50 and 60 mm/s printing speeds, 180 rpm motor speed and 0.8 mm nozzle with a 0.005 cm³/s extrusion rate, with minimum alteration in colour.

Food layered manufacturing (FLM) is a novel concept that uses a specialized printer to fabricate edible objects by layering edible materials, such as chocolate, confectionaries and pureed fruits and vegetables. FLM is a disruptive technology that enables the creation of personalized and texture-tailored foods, incorporating desired nutritional values and food quality, using a variety of ingredients and additions. This research highlights the potential of SCOBY as a viable material for 3D food printing applications.

The purpose of this study is to offer a better and more effective hexacopter design for a 3 kg payload using finite element analysis (FEA), facilitating the use of different materials for different components that too without compromising strength.

A 3D computer-aided design (CAD) model of a hexacopter with a regular hexagonal frame is presented. Furthermore, a finite element model is developed to perform a structural analysis and determine Von Mises stress and strain values along with deformations of different components of the proposed hexacopter design.

The results establish that carbon fibre outperforms acrylonitrile butadiene (ABS) with respect to deformations. Within the permissible limits of the stress and strain values, both carbon fiber and ABS are suggested for different components. Thus, a proposed hexacopter offers lighter weight, high strength and low cost.

The use of different materials for different components is suggested by making use of static structural analysis. This encourages new research work and helps in developing new applications of hexacopter, and it has never been reported in literature. The suggested materials for the components of the hexacopter will prove to be suitable considering weight, strength and cost.

Firefighter Personal Protective Equipment (PPE) is the only barrier between the firefighter and hazardous environment. Gloves are a crucial component of the multi-component PPE. Over time the gloves have reduced the intensity of hand injuries, yet further improvement in terms of material selection and glove design is required to strike the balance between protection and comfort. Focusing on the material aspect, the purpose of this study is to present literature analysis on material selection and testing for firefighter gloves.

The study conducted a literature analysis on material selection and characterization of firefighter PPE. The review summarizes and evaluates past work addressing the characterization of firefighter gloves in accordance with NFPA 1971 requirements and points out found research gaps to aid with foundation of future research.

The study summarizes several research works to inform readers about the material selection and characterization of firefighter gloves. Based on the analyzed literature, the study resulted in material specification sheets for firefighter gloves. The developed material specification sheets provide information in terms of crucial material properties to be incorporated for accurate functioning of firefighter gloves, testing methods to validate those material properties and materials from analyzed literature exhibiting desired properties.

With large research addressing firefighter PPE, only limited studies focus specifically on gloves. Thus, this study provides a literature analysis covering material selection and testing for gloves. A consolidated firefighter gloves material specification document, which does not appear to be available in the literature, will provide a foundation for the development and characterization of firefighter gloves to better serve the functions along with ensuring user comfort.

Additive manufacturing also known as 3D printing is an evolving advanced manufacturing technology critical for the new era of complex machinery and operating systems. Manufacturing systems are increasingly faced with risk of attacks not only by traditional malicious actors such as hackers and cyber-criminals but also by some competitors and organizations engaged in corporate espionage. This paper aims to elaborate a plausible risk practice of designing and demonstrate a case study for the compromised-based malicious for polymer 3D printing system.

This study assumes conditions when a machine was compromised and evaluates the effect of post compromised attack by studying its effects on tensile dog bone specimens as the printed object. The designed algorithm removed predetermined specific number of layers from the tensile samples. The samples were visually identical in terms of external physical dimensions even after removal of the layers. Samples were examined nondestructively for density. Additionally, destructive uniaxial tensile tests were carried out on the modified samples and compared to the unmodified sample as a control for various mechanical properties. It is worth noting that the current approach was adapted for illustrating the impact of cyber altercations on properties of additively produced parts in a quantitative manner. It concurrently pointed towards the vulnerabilities of advanced manufacturing systems and a need for designing robust mitigation/defense mechanism against the cyber altercations.

Density, Young’s modulus and maximum strength steadily decreased with an increase in the number of missing layers, whereas a no clear trend was observed in the case of % elongation. Post tensile test observations of the sample cross-sections confirmed the successful removal of the layers from the samples by the designed method. As a result, the current work presented a cyber-attack model and its quantitative implications on the mechanical properties of 3D printed objects.

To the best of the authors’ knowledge, this is the original work from the team. It is currently not under consideration for publication in any other avenue. The paper provides quantitative approach of realizing impact of cyber intrusions on deteriorated performance of additively manufactured products. It also enlists important intrusion mechanisms relevant to additive manufacturing.

This study was conducted to achieve the following objectives: (1) determine the differences and reasons for using outgroup OSNs by gender, age and student groups (Mainland and Hong Kong [HK] students); (2) uncover the impact of online social networks (OSNs) on the development of Mainland–HK friendships and (3) determine the roles of different OSNs (social networking sites [SNSs] and instant messaging platforms [IMPs]) in the development of intercultural friendships in the real world.

To explore how OSNs facilitate (or inhibit) intercultural interactions, 198 students completed a questionnaire and 24 students participated in follow-up semi-structured interviews examining the role of OSNs in intercultural friendship development.

Results revealed that demographic and motivational preferences for using outgroup-OSNs differed among students. Both IMPs and SNSs helped students maintain friendships using little effort, whereas it tended to strengthen their existing social networks, rather than helping to start new friendships. IMPs helped develop a sense of “presence awareness”, strengthening pre-existing friendships and solidifying offline connections. SNSs also assisted students in exploring their shared interests while revealing their values and cultural differences.

The authors’ findings offered empirical evidence on social exchange theory and anxiety-uncertainty management theory regarding the perceived benefit of OSNs on students' friendship development.

The study sheds light on the differences between Mainland Chinese and HK students, including participants' perceptions of different friendship stages.

This study is interested in the roles of different SNSs and IMPs in intercultural friendship development, especially their strengths and weaknesses as perceived by students. Also, the authors are curious about how students select and use IMPs and SNSs differently according to their individual preferences and needs. To the authors’ knowledge, the dynamic link between online communication and intercultural friendship development has not been thoroughly examined in the field of intercultural communication.

Skilled workers are crucial for an organization’s success, and managing, retaining and attracting them is vital in long-term. This study aims to explore talent management practices in the Finnish restaurant industry and to align workers' expectations with the real-world experiences of their work to reduce turnover and enhance job satisfaction.

The study adopts a mixed methods approach, including a survey and interviews with workers and managers to gain insights into their expectations and experiences of work. The study considers themes for designing and implementing effective talent management procedures.

This study highlights the importance of employees' experiences of their work conditions, leveraging positive emotions and fair utilization of temporary agency work (TAW). Understanding the different work preferences of generational cohorts and addressing the challenges associated with owner disengagement and TAW can also contribute to attracting and retaining talent in the restaurant industry.

Skilled workers have often been portrayed as targets that need to be managed, with insufficient consideration given to their preferences, needs and expectations. With the findings of this study, companies can establish mutual understanding with their employees and attract diverse talent.