Search results

Thiadiazole compounds and their derivatives have carrying capacity and good lubricating properties. However, their poor oil-solubility limited their wide usage in lubricating oil. The study aims to develop thiadiazole lubricant additives with better oil-solubility. When the hindered phenol antioxidation functional group and alkyl-chain are introduced to thiadiazole, the resulting product could have better oil-solubility and excellent antioxidation resistance, anti-wear and corrosion resistance in the lubricating oil.

One kind of thiadiazole lubricant additive, for the first time, has been synthesized from 2,5-dimercapto-1,3,4-thiadiazole. Its tribological performance has also been evaluated by four-ball test. And, its oxidation resistance has been estimated by rotating pressure vessel oxidation test and pressurized differential scanning calorimetry. The anticorrosion performance of such an additive has been studied by GB/T 5096 standard method test.

The synthesized thiadiazole additive has excellent anti-oxidation capability, good anti-wear and extreme pressure properties and good anticorrosion performance, in comparison with zinc dialkyl dithiophosphate (ZDDP). In base oils, the comprehensive performance of thiadiazole additive is comparable to ZDDP. Mechanistic studies indicate that the S and N active elements were involved in the formation of a boundary film. This may account for the formation of a composite membrane on the metal surface and thus for the tribological performance of such thiadiazole additives.

The thiadiazole derivatives, which are ashless and have environmentally friendly features, are a potential alternative to ZDDP. Because of the film formed on the friction surface, thiadiazole compounds may serve as an excellent anti-wear additive and are expected to reduce friction and wear between metals.

Pure 2,5‐dimercapto‐1,3,4‐thiadiazole (DMTD) disulfide dimer (DMS2) shows excellent four ball weld properties, however, the product is a solid material with relatively low initial seizure load and exhibits certain corrosion, which accelerate oxidation of the lubricant by catalytic effect on metals. The author make efforts to resolve problems said by design a novel thiadiazole complex.

The complex of thiadiazole dimmer and polyglycol (DMS2‐GL) was synthesized as ashless grease additive. The antiwear and load carrying properties of the additive and their synergistic effects was evaluated by four ball tester in four types of lubricant grease. Moreover, corrosion inhibiting properties of compositions said was investigated by copper corrosion test.

The additive DMS2‐GL possessed good load carrying capacity, and exhibits good synergistic antiwear and load carrying prop with rust inhibitor. In addition, dates obtained from copper corrosion test show that it does not corrode copper but coats the metal with a film, and could improve the anticorrosion of corrosive additives molybdenum dialkyldithiophosphate (MoDDP) and molybdenum dibutyldithiocarbamate (MoDTC) by forming protective films on rubbing surface, which contribute to improving corrosion inhibiting property of greases. Finally, the tribo‐chemical mechanism was proposed that thiadiazole dimer and polyglycol could coordinate with each other by polydentate surface interaction, which means thiadiazole rings interact with the metal surface, polyglycol affords a bridging technology linked thiadiazole dimmers so as to lighten loads and strengthen forces between thiadiazole dimmer moleculars.

This paper provides a good ashless additive which has good antiwear, extreme pressure and corrosion inhibiting properties, and fulfils an identified resources need, which can offer practical help in industrial applications and to an individual starting out on an academic career.

Corrosion inhibitors for copper immersed in emulsion were investigated by experiments and theoretical calculations, and this study aims to propose a new inhibition mechanism of the inhibitors having protective effects for copper corrosion.

Adsorption behavior of penta-heterocycles (thiophene, 1,2,5-oxadiazole, furan, 2 H-1,2,3-triazole, pyrrole and 1,2,5-thiadiazole) as corrosion inhibitors for copper immersed in oil-in-water (O/W) emulsions was investigated by weight loss, electrochemical tests, morphological characterization and theoretical calculations.

The orders of inhibition effect are furan < pyrrole < thiophene < 1,2,5-oxadiazole < 2H-1,2,3-triazole < 1,2,5-thiadiazole, and 1,2,5-thiadiazole at 0.5 mM has the best inhibition effect for copper immersed in emulsion. The results of scanning probe microscope, scanning electron microscope and electrochemical test show that a protective barrier can be formed on the surface of copper substrate with six corrosion inhibitors, thus effectively inhibiting the corrosion of copper mainly through chemisorption and following Langmuir’s adsorption isotherm.

Quantum chemical and molecular dynamic simulations demonstrate that all these compounds attached to Cu matrix with a flat-adsorption mode to prevent the emulsion corrode copper. Adsorbed inhibitors act as a barrier at Cu matrix to block corrosion and improve hydrophobicity.

This paper aims to evaluate the inhibition efficiency of thiadiazole derivatives, such as 2,5-dimercapto-1,3,4-thiadiazole (DMTD), 5-methly-2-mercapto-1,3,4-thiadiazole (MMTD) and 2,5-dithiododecyl-1,3,4-thiadiazole (DDTD), in 50 mg/L hydrogen sulfide for silver strip.

Evaluation was carried out by corrosion-inhibiting test, electrochemical measurement and surface analysis techniques. 3D surface profiler, atom force microscopy, scanning electron microscopy and energy-dispersive X-ray analysis were applied and finally confirmed the existence of the adsorbed film.

The electrochemical measurement showed that the inhibition efficiency increases with increasing inhibitor concentration in 50 mg/L hydrogen sulfide solution, while the corrosion rate and the corrosion current decrease. Weight-gained measurements also indicated that inhibitor decreases the corrosion rate in the studied solution. The adsorption of DMTD and MMTD on the silver surface obeys Temkin’s adsorption isotherm, but the adsorption of DDTD follows Langmuir’s adsorption isotherm. That means that the inhibition mechanism is different between DMTD, MMTD and DDTD. The ΔG0_ad values of DMTD, MMTD and DDTD were −37.47, −37.29 and −38.69 kJ/mol, respectively. It showed that there was an adsorption bond between silver surface and inhibitor, and the adsorption belongs to chemical adsorption.

The inhibitors have an excellent inhibition efficiency, and the best inhibition efficiency is 91.76 per cent. Inhibitors can effectively inhibit metal corrosion in the oil and gas.

This paper aims to synthesize new screen-printing ink formula based on new derivatives of azo thiadiazol disperse dyes and evaluate their characteristics after being printed on polyester fabric substrates.

New dispersed dyes based on 1, 3, 4-Thiadiazole derivatives (dyes 1 and 2) were prepared and confirmed by different analyses, infrared (IR), mass and nuclear magnetic resonance (NMR) spectroscopy, and then formulated as colored materials in the screen-printing ink formulations. Printing pastes containing the prepared dyestuffs and other ingredients were used for printing polyester using screen-printing or traditional printing. The characteristics of printed polyester fabric substrates were measured by color measurements such as a*, b*, L*, C*, E, Ho, R% and color strength, as well as light, washing, crock and alkali perspiration fastness, and finally, the depth of penetration was evaluated.

The prepared 1, 3, 4-Thiadiazole derivatives (dyes 1 and 2) were obtained from the reaction of 5,5’-(1,4-phenylene)bis(1,3,4-Thiadiazole-2-amine) with resorcinol and m-toluidine as a coupling component. The suitability of the prepared dyestuffs for silk screen-printing on polyester fabrics has been investigated. The prints obtained from a formulation containing dye 1 possess high color strength as well as good overall fastness properties if compared to those obtained using dye 2.

The method of synthesis of the new dyestuffs and screen-printing ink provides a simple and practical solution to prepare some new heterocyclic disperse azo dyes, and they are formulated in the screen-printing inks for printing on a polyester fabric substrate.

The prepared disperse dyes based on 1,3,4-Thiadiazole derivatives (dyes 1 and 2) could be used in textile printing of polyester on an industrial scale.

The purpose of this paper is to present the tribological, anticorrosion and antirust properties of three 2,5-dimercapto-1,3,4-thiadiazole (DMTD) derivatives as water-soluble additives in water–glycol hydraulic fluid.

DMTD derivatives possessing excellent corrosion inhibiting and extreme-pressure (EP) properties have long been used as metal passivators and load-carrying additives in lubricating oils and grease. However, there are seldom literatures about DMTD derivatives as water-soluble lubricant additives as yet. In this work, three DMTD derivatives were synthesized and investigated as water-soluble additives in the water–glycol hydraulic fluid. Their tribological properties were evaluated in detail by four-ball wear test machine and Optimol SRV-IV oscillating friction and wear tester. Meanwhile, their anticorrosion and antirust properties were also investigated by copper strip corrosive tests and antirust tests, respectively. The worn surfaces were analyzed by scanning electron microscope and X-ray photonelectron spectroscope, and the EP, antiwear and friction-reducing mechanisms were primarily proposed.

The synthesized three DMTD derivatives (coded as A, B and C) have excellent solubility in the base liquid of the water–glycol hydraulic fluid. The experimental results demonstrated that all these compounds, especially A, could remarkably improve the EP, antiwear and friction-reducing properties of the base liquid. Furthermore, they all have perfect copper corrosion inhibiting and antirust properties with low adding concentration (< 3 weight per cent) in the base liquid and hence could be used as multifunctional additives in the water–glycol hydraulic fluid.

This research only focused on the synthesized DMTD derivatives. If possible, some other thiadiazole derivatives also should be investigated.

The synthesized DMTD derivatives, especially compound A, can be used as multifunctional water-soluble additives in the water–glycol hydraulic fluid.

In this paper, three DMTD derivatives were synthesized and their tribological behaviors as water-soluble lubricant additives were investigated for the first time. In addition, the EP, antiwear and friction-reducing mechanisms were also put forward.

This paper aims to improve the anti-corrosion of oil transportation pipelines.

The authors provide a simple, efficient and inexpensive one-pot method for the novel thiadiazole derivatives synthesized using 2-substituted [1, 3, 4] thiadiazole, P₂O₅ and chloroacetic acid as materials by using XH-200A computer microwave solid-liquid phase synthesizer. The results showed that microwave heating can finish the reaction sufficiently in 20 min, and the optimal addition reaction conditions were n([1, 3, 4] thiadiazole):n(chloroacetic acid):P₂O₅ = 1:1.2:1.3. Under such conditions, the yield of the title products was 54 per cent.

The structure of the title compounds were all confirmed by Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy. Water-based inhibitors corrosion behaviors on the stainless steel (SS) surface in 1 mol/L HCl solution at room temperature were also studied by weight loss methods and polarization curves. The results of the curves showed that an appropriate amount of 2a (40 ppm) can improve the anti-corrosion efficiency, whereas an excessive amount of 2a (e.g. 50 ppm) may not significantly increase the anti-corrosion efficiency.

In view of continuation of our studies, this paper presents microwave-assisted one-pot synthesis of 2-substitued [1, 3, 4] thiadiazole derivatives, and its anti-corrosion performance was tested by weight loss methods and polarization curves.

This study aims to show the dyeing behaviour of polyester fabrics using four novel heterocyclic disperse dyes.

The four dyes were synthesized based on 5, 5'-(1, 4-phenylene) bis (1, 3, 4-thiadiazol-2-amine) as a diazonium compound. The UV/Vis absorption spectroscopic data of these disperse dyes while dyeing polyester fabrics were investigated. Following this, the dyeing properties of these dyes on polyester fabrics were investigated under acid condition.

The results showed that increasing the dyeing temperature from 80°C to 100°C led to an increase in dye uptake for all dyes, but further increases of the temperature to 130°C led to higher dye uptake for dye 3 as the dye exhaustion increased by about 50% from 55.9% to 91.4%.

This study is important as it introduces new dyes for the dyeing of polyethylene terephthalate (PET) fibres with colours that range from yellowish orange to bluish yellow and scarlet red and all with excellent brightness, levelness and depth of shade.

This paper aims to evaluate the inhibitive effect and adsorption behavior of the 2-amino-5-thiol-1,3,4-thiadiazole vanillin (A) on copper in 3 per cent NaCl solution.

A thiazole Schiff bases were synthesized, named, 2-amino-5-thiol-1,3,4-thiadiazole vanillin (A), which was fabricated respectively on copper surface by the molecular self-assembled. Evaluation was carried out by electrochemical measurement and surface analysis techniques. Measurement of static friction coefficient scanning electron microscopy and Contact angle analysis were applied, and it is finally confirmed the existence of the adsorbed film. The inhibitive mechanism of A was evaluated by means of quantitative calculation and molecular dynamics simulation.

The electrochemical measurement indicated that the self-assembled molecular film can effectively inhibit the corrosion of copper sheet, when the concentration was 15 mmol⋅L⁻¹ and the assembly time was 6 h, the corrosion inhibition effect was the best, reaching as high as 97.5 per cent. Scanning electron microscopy results showed that the Schiff base compound forms a protective film on the surface of the copper, which effectively blocks the transfer of corrosion particles to the metal substrate, thereby inhibiting the occurrence of corrosion. Adsorption behavior of A followed the Langmuir’s adsorption isotherm and attributed to mixed-type adsorption. The results of Quantitative calculation and molecular dynamics simulation showed that A was adsorbed on Cu (111) surface in parallel.

In this study, the corrosion inhibition properties of Schiff base film were investigated by combining theory with experiment. Theoretical calculation is helpful to guide the synthesis of efficient and environmentally friendly corrosion inhibitors.

The damage caused by metal corrosion is great. The self-assembled Schiff base membrane synthesized in this paper is simple and compact, and the corrosion inhibition efficiency of copper in 3 per cent NaCl solution is 97.5 per cent.

Inhibition of metal corrosion can better save energy and reduce economic losses.

The synthesized Schiff base was prepared on the copper surface by the molecular self-assembled. The Schiff base membrane has a good corrosion inhibition effect on copper in 3 per cent NaCl solution, and the corrosion inhibition efficiency is up to 97.5 per cent.

Sulphur dioxide, a dangerous atmospheric pollutant, is a major concern with the increasing use of coal as a combustion fuel in thermal power plants. Numerous efforts were made through these years to minimize the emission of sulphur dioxide and one such effort is the desulphurization of the flue gas generated during combustion, commonly termed as flue gas desulphurization (FGD). However, the materials of construction used for FGD systems, usually of type 316L stainless steel were reported to be failed due to the localized corrosion attack by the aggressiveness of the environment, mainly of chloride, fluoride, acidity and temperature encountered during the scrubbing of SO2.