Search results

1 – 10 of 97
Article
Publication date: 9 August 2013

Rajneesh Kumar and Rajeev Kumar

The purpose of this research is to study the reflection and transmission of elastic waves at the interface of an elastic half‐space and initially stressed thermoelastic diffusion…

Abstract

Purpose

The purpose of this research is to study the reflection and transmission of elastic waves at the interface of an elastic half‐space and initially stressed thermoelastic diffusion with voids half‐space.

Design/methodology/approach

Two‐dimensional model has been considered of an isotropic elastic half‐space (Medium I) lying over a homogeneous isotropic generalized initially stressed thermoelastic diffusion with voids half‐space (Medium II). There exist two waves, P‐wave and SV‐wave, in isotropic elastic half‐space and four quasi‐longitudinal waves, namely, quasi‐longitudinal wave (QP‐mode), quasi‐longitudinal mass diffusive wave (QMD‐mode), quasi‐longitudinal thermal wave (QPT‐mode) and quasi‐longitudinal volume fractional wave (QPV‐mode), and one quasi‐transverse wave (QSV‐mode) exists in initially stressed thermoelastic diffusion with voids half‐space.

Findings

The energy ratios of these waves are computed along various directions of incident wave, and it is found that the sum of all energy ratios is exactly unity at each value of incident angle. The amplitude ratios of various waves have been obtained numerically.

Originality/value

Reflection and transmission of an elastic medium is of great practical importance. Since valuable organic and inorganic deposits beneath the earth surface are difficult to detect by drilling randomly, wave propagation is the simplest and most economic technique for these and does not require any drilling through the earth. Almost all the oil companies rely on seismic interpretation for selecting the sites for exploratory oil wells because seismic wave methods have higher accuracy, have higher resolution and are more economical, as compared to drilling which is expansive and time consuming.

Details

Multidiscipline Modeling in Materials and Structures, vol. 9 no. 2
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 28 September 2012

Rajneesh Kumar and Rajeev Kumar

The purpose of this research is to study the reflection and refraction of elastic waves at the interface of an elastic half‐space and initially stressed thermoelastic with voids

Abstract

Purpose

The purpose of this research is to study the reflection and refraction of elastic waves at the interface of an elastic half‐space and initially stressed thermoelastic with voids half‐space.

Design/methodology/approach

A two‐dimensional model was considered of an isotropic elastic half‐space (medium I) lying over a homogeneous isotropic generalized initially stressed thermoelastic with voids half‐space(medium II). There exist two waves, P‐wave and SV‐wave in isotropic elastic half‐space and three quasi‐longitudinal waves namely, quasi‐longitudinal wave (QP‐mode), quasi‐longitudinal thermal wave (QPT‐mode), quasi‐longitudinal volume fractional wave (QPV‐mode) and one quasi‐transverse wave (QSV‐mode) exists in initially stressed thermoelastic with voids half‐space.

Findings

The energy ratios of these waves are computed along various directions of incident wave, and it is found that the sum of all energy ratios is exactly unity at each value of incident angle. The amplitude ratios of various waves were obtained numerically.

Originality/value

Reflection and refraction of an elastic medium is of great practical importance. Since valuable organic and inorganic deposits beneath the earth surface are difficult to detect by drilling randomly, wave propagation is the simplest and most economic technique to these and does not require any drilling through the earth. Almost all the oil companies rely on seismic interpretation for selecting the sites for exploratory oil wells because seismic wave methods have higher accuracy, higher resolution and more economical, as compared to drilling which is expansive and time consuming.

Details

Multidiscipline Modeling in Materials and Structures, vol. 8 no. 3
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 11 September 2019

Baljeet Singh and Himanshu Singla

The purpose of this paper is to study the effects of rotation, voids and diffusion on characteristics of plane waves in a thermoelastic material.

Abstract

Purpose

The purpose of this paper is to study the effects of rotation, voids and diffusion on characteristics of plane waves in a thermoelastic material.

Design/methodology/approach

Lord and Shulman generalization of linear thermoelasticity is used to study the plane waves in a rotating thermoelastic material with voids and diffusion. The thermoelastic solid is rotating with a uniform angular velocity. The problem is specialized in two dimensions to study wave propagation. The plane harmonic solutions of governing field equations in a plane are obtained.

Findings

A velocity equation is obtained which indicates the propagation of five coupled plane waves in the medium. Reflection of an incident plane wave from stress-free surface of a half-space is also considered to obtain the amplitude ratios of various reflected waves. A numerical example is considered to illustrate graphically the effects of rotation, frequency, void and diffusion parameters on speeds and amplitude ratios of plane waves.

Originality/value

The present problem covers the combined effects of rotation, voids and diffusion on characteristics of plane waves in linear thermoelastic material in the context of Lord and Shulman (1967) and Aouadi (2010) theories, which are not studied in literature yet.

Details

Multidiscipline Modeling in Materials and Structures, vol. 16 no. 1
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 15 November 2022

Sandeep Kundu, Kapil Kumar Kalkal, Monika Sangwan and Devender Sheoran

The purpose of the present paper is to investigate the thermo-mechanical interactions in an initially stressed nonlocal micropolar thermoelastic half-space having void pores under…

154

Abstract

Purpose

The purpose of the present paper is to investigate the thermo-mechanical interactions in an initially stressed nonlocal micropolar thermoelastic half-space having void pores under Lord–Shulman model. A moving thermal shock is applied to the formulation.

Design/methodology/approach

The normal mode technique is adopted to obtain the exact expressions of the physical quantities.

Findings

Numerical computations for stresses, displacement components, temperature field and change in the volume fraction field are performed for suitable material and are depicted graphically. Some comparisons have been shown in figures to estimate the effects of micropolarity, initial stress, voids, nonlocal parameter and time on the resulting quantities.

Originality/value

The exact expressions for the displacement components, stresses, temperature and change in the volume fraction field are obtained in the physical domain. Although numerous investigations do exist to observe the disturbances in a homogeneous, isotropic, initially stressed, micropolar thermoelastic half-space, the work in its current form has not been established by any scholar till now. The originality of the present work lies in the formulation of a fresh research problem to investigate the dependence of different physical fields on nonlocality parameters, micropolarity, initial stress, porosity and time due to the application of a moving thermal shock.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 33 no. 3
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 15 November 2011

Rajneesh Kumar and Rajeev Kumar

The purpose of this paper is to study the wave propagation in transversely isotropic generalized thermoelastic half‐space with voids under initial stress.

Abstract

Purpose

The purpose of this paper is to study the wave propagation in transversely isotropic generalized thermoelastic half‐space with voids under initial stress.

Design/methodology/approach

The authors analyze the wave propagation and reflection of plane waves incident at the stress free, thermally insulated or isothermal surface of a homogeneous, transversely isotropic generalized thermoelastic half‐space with voids. The graphical representation is given for amplitude ratios of various reflected waves to that of incident waves for different direction of propagation. The phase velocities and attenuation coefficients of plane waves are also computed and presented graphically for various incident angles.

Findings

The phase velocities and attenuation coefficients of these plane waves are computed along various direction of wave propagation and the reflection characteristics of these waves, stress free, thermally insulated or isothermal boundary conditions are considered. The amplitude ratios of various reflected waves to that of incident waves have been obtained numerically.

Originality/value

Wave propagation in an elastic medium is of great practical importance. Since valuable organic and inorganic deposits beneath the earth surface are difficult to detect by drilling randomly, wave propagation is the simplest and most economic technique and does not require any drilling through the earth. Almost all the oil companies rely on seismic interpretation for selecting the sites for exploratory oil wells because seismic wave methods have higher accuracy, higher resolution and are more economical, compared to drilling, which is expensive and time consuming. The study described in this paper would be very useful for those involved in signal processing, sound system and wireless communication.

Details

Multidiscipline Modeling in Materials and Structures, vol. 7 no. 4
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 6 August 2010

Mohamed I.A. Othman and Kh. Lotfy

The purpose of this paper is to formulate a model of the equations of a two‐dimensional problem with the deformation of micropolar generalized thermoelastic medium with voids

Abstract

Purpose

The purpose of this paper is to formulate a model of the equations of a two‐dimensional problem with the deformation of micropolar generalized thermoelastic medium with voids under the influence of various sources in the context of the Lord‐Shulman, Green‐Lindsay theories, as well as the classical dynamical coupled theory.

Design/methodology/approach

The normal mode analysis was used to obtain the exact expressions of the displacement components, force stress, coupled stress, change in volume fraction field and temperature distribution. Numerical results were given and illustrated graphically when the volume source was applied.

Findings

The presence of voids plays a significant role on all the physical quantities. The value of normal displacement and normal force stress increases while the temperature, tangential force stress and the couple stress increase and then decrease due to the presence of voids. The value of all the physical quantities converges to zero with increase in distance z.

Originality/value

Comparisons are made with the results predicted by the three theories in the presence and the absence of material constants due to voids.

Details

Multidiscipline Modeling in Materials and Structures, vol. 6 no. 2
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 24 July 2023

Rachaita Dutta, Soumik Das, Shishir Gupta, Aditi Singh and Harsh Chaudhary

The purpose of this study is to analyze the thermo-diffusion process in a semi-infinite nonlocal fiber-reinforced double porous thermoelastic diffusive material with voids

Abstract

Purpose

The purpose of this study is to analyze the thermo-diffusion process in a semi-infinite nonlocal fiber-reinforced double porous thermoelastic diffusive material with voids (FRDPTDMWV) in light of the fractional-order Lord–Shulman thermo-elasto-diffusion (LSTED) model. By virtue of Eringen’s nonlocal elasticity theory, the governing equations for the considered material are developed. The free surface of the substrate is governed by the inclined mechanical load and thermal and chemical shocks.

Design/methodology/approach

With the aid of the normal mode technique, the solutions of the nondimensional coupled governing equations have been obtained.

Findings

The expressions of field variables are obtained analytically. By using MATHEMATICA software, various graphical implementations are presented to describe the impacts of angle of inclination, fractional-order and nonlocality parameters. The present model is also validated on the basis of some comparative studies with some preestablished cases.

Originality/value

As observed from the literature survey, many different studies have been carried out by taking into account the deformation analysis in nonlocal double porous thermoelastic material structures and thermo-mechanical interaction in fiber-reinforced medium under fractional-order thermoelasticity theories. However, to the best of the authors’ knowledge, no research emphasizing the thermo-elasto-diffusive interactions in a nonlocal FRDPTDMWV has been carried out. Moreover, the effect of fractional-order LSTED theory on fiber-reinforced thermoelastic diffusive half-space with double porosity has not been illuminated till now, which significantly defines the novelty of the conducted research.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 33 no. 11
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 8 August 2016

Mohamed Ibrahim A Othman and Mohamed I. M. Hilal

The purpose of this paper is to investigate the influence of the gravity and the magnetic fields on the plane waves in a homogenous, linear and isotropic thermoelastic medium…

92

Abstract

Purpose

The purpose of this paper is to investigate the influence of the gravity and the magnetic fields on the plane waves in a homogenous, linear and isotropic thermoelastic medium subjected to the laser pulse heating.

Design/methodology/approach

The problem has been solved analytically and numerically by using the normal mode analysis.

Findings

Numerical results for the temperature, the displacement components, the stress components and the volume fraction were presented graphically and analyzed the results. The graphical results indicate that the effect of gravity and magnetic fields are observable physical effects on the porous thermoelastic material heated by a laser pulse. Comparisons are made with the results in the absence and presence of the gravity and the magnetic fields, also at various times.

Originality/value

In the present work, the authors shall formulate a 2-D problem for the propagation of plane waves on the porous thermoelastic material influenced by the gravity and the magnetic fields subjected to a laser pulse heating act as a thermal shock. A comparison is also made between the two types II and III of Green-Naghdi theory in the absence and the presence of the gravity and the magnetic fields. Such problems are very important in many dynamical systems.

Details

Multidiscipline Modeling in Materials and Structures, vol. 12 no. 2
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 19 June 2019

Mohamed I.A. Othman and Elsayed M. Abd-Elaziz

The purpose of this study is to obtain a general solution to the field equations of thermoelastic solid with voids and micro-temperatures under the gravitational field in the…

Abstract

Purpose

The purpose of this study is to obtain a general solution to the field equations of thermoelastic solid with voids and micro-temperatures under the gravitational field in the context of the three theories, namely, coupled theory (CT), Lord and Shulman theory and Green and Lindsay theory.

Design/methodology/approach

The normal mode analysis is used to obtain the exact expressions for the considered variables. Comparisons are made with the results obtained in the three theories with and without gravity. Some particular cases are also deduced from the present investigation.

Findings

The effect of the gravity on the displacement, the micro-temperature vector, the temperature distribution, the normal stress, the changes in the volume fraction field and the heat flux moments have been depicted graphically.

Research limitations/implications

Some particular cases are also deduced from the present investigation.

Originality/value

The results of the physical quantities have been illustrated graphically by a comparison between three different theories in the presence and absence of gravity.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 29 no. 9
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 14 August 2017

Mohamed Ibrahim A. Othman and Mohamed Ibrahim M. Hilal

The purpose of this paper is to study the effect of rotation and initial stress on magneto-thermoelastic material with voids heated by a laser pulse heating.

Abstract

Purpose

The purpose of this paper is to study the effect of rotation and initial stress on magneto-thermoelastic material with voids heated by a laser pulse heating.

Design/methodology/approach

The analytical method used was the normal mode analysis technique.

Findings

Numerical results for the physical quantities were presented graphically and analyzed. The graphical results indicate that the effect of rotation, initial stress and magnetic fields are observable physical effects on the thermoelastic material with voids heated by a laser pulse. Comparisons are made with the results in the absence and the presence of the physical operators, also at various times.

Originality/value

In the present work, the authors shall investigate the effect of the rotation, initial stress, magnetic field and laser pulse on thermoelastic material with voids subjected to a laser pulse heating acting as a thermal shock. A comparison is also made between the two types (types II and III) of Green-Naghdi theory in the absence and the presence of the physical operators. Such problems are very important in many dynamical systems.

Details

Multidiscipline Modeling in Materials and Structures, vol. 13 no. 2
Type: Research Article
ISSN: 1573-6105

Keywords

1 – 10 of 97