Search results

The purpose of this paper is to show these effects in an abstracted micro gap test bench. Because of stronger emission laws, the ambition to raise the rail pressure in common-rail systems from the current 2500 bar to 3000 bar is a given. The pressure increase will allow fine atomization of fuel and therefore more efficient combustion. But within the technical system of the high-pressure pump, stronger thermal stresses of the piston–cylinder contact are expected. A pressure drop from such a high level causes high temperature gradients due to energy dissipation.

For a detailed examination, the critical piston–cylinder contact has been investigated in an abstracted test bench with a flat parallel gap and an equivalent thermo-elastohydrodynamic simulation model.

The simulation results show good accordance to the measurements of pressures, temperatures and leakages for pressures up to 3000 bar. Comparison with elastohydrodynamic lubrication results outlines the need to consider temperature and pressure effects viscosity and solid deformation for the simulation and design of tribological contacts at high pressures.

This paper describes a simulation method with high accuracy to investigate tribological contacts considering temperature effects on solid structures and the fluid film. The thermo-elastohydrodynamic lubrication simulation method is valid not only for piston–cylinder contacts in high-pressure pumps but also for journal bearings in combustion engines.

This paper aims to study the impact of transient velocity changes on sealing performance during reciprocating sealing processes.

Establish a model of transient mixed lubrication, solve the transient Reynolds equation, consider the effect of temperature rise at the seal interfaces, and determine the behavior of the seal interfaces, such as film thickness and fluid pressure. Evaluation with friction and leakage rate, calculate the variation of sealing performance with reciprocating velocity under different working conditions, and verify it through bench experiments.

Within a reciprocating stroke, the frictional force decreases with increasing velocity, and the frictional force of the outstroke is greater than that of the instroke; at the time of the stroke transition, the fluid pressure is smallest and the rough peak contact pressure is greatest. At present, the dynamic pressure effect of fluids is the largest, and the friction force also increases, which increases the risk of material wear and failure. Friction and leakage increase with increasing pressure and root mean square roughness. As temperature increases, friction increases and leakage decreases. In studying the performance variations of seal components through a reciprocating sealing experiment, it was found that the friction force decreases with increasing velocity, which is consistent with the calculated results and more similar to the calculated results considering the temperature rise.

This study provides a reference for the study of transient sealing performance.

The misalignment is generally inevitable in the process of machining and assembly of rotor systems with gas foil bearings, but the exploration on this phenomenon is relatively less. Therefore, the purpose of this paper is to carry out the thermo-elastohydrodynamic analysis of the foil bearing with misalignment, especially the inhomogeneous foil bearing.

The rotor is allowed to misalign in two non-rotating directions. Then the static and dynamic performance of the inhomogeneous foil bearing is studied. The thermal-elastohydrodynamic analysis is realized by combining the Reynolds equation, foil deformation equation and energy equation. The small perturbation method is used to calculate the dynamic coefficients, then the critical whirl ratio is obtained.

The gas pressure, film thickness and temperature distribution distort when the misalignment appears. The rotor misalignment can improve the loading capacity but rise the gas temperature at the same time. Furthermore, the rotor misalignment can affect the critical whirl ratio which demonstrates that it is necessary to analyze the misalignment before the rotordynamic design.

The value of this paper is the exploration of the thermo-elastohydrodynamic performance of the inhomogeneous foil bearing with misalignment, the analysis procedure and the corresponding results are valuable for the design of turbo system with gas foil bearings.

The purpose of this paper is to acquire sealing properties of supercritical CO₂ (S-CO₂) T-groove seal under ultra-high-speed conditions by thermo-elastohydrodynamic lubrication (TEHL) analysis.

Considering the choked flow effect, the finite difference method is applied to solve the gas state equation, Reynolds equation and energy equation. The temperature, pressure and viscosity distributions of the lubricating film are analyzed, and sealing characteristics is also obtained.

The face distortions induced by increasing rotational speed leads to the convergent face seal gap. When the linear velocity of rotation exceeds 400 m/s, the maximum temperature difference of the sealing film is approximately 140 K, and the viscosity of CO₂ is altered by 17.80%. Near the critical temperature point of CO₂, while the seal temperature increases by 50 K, the opening force of the T-groove non-contact seal enhances by 20% and the leakage rate declines by 80%.

The TEHL characteristics of the T-groove non-contact seal are numerically analyzed under ultra-high-speed, considering the real gas effect and choked flow effect. In the supercritical conditions, the influence of rotational speed, seal temperature, seal pressure and film thickness on sealing performance and face distortions is analyzed.

The treatment of Reynolds equation when the film thickness is unknown and the center of pressure is known, together with the energy and the bending equation, allows a realistic simulation of the performance of large thrust bearing. In a spring‐supported thrust‐pad bearing the distortion caused by the generated pressure thermal gradient yields a surface profile of opposite shapes. The thermoelastic analysis performed here makes it possible to determine the resultant film shape of the thrust pad.

In high-pressure pumps, due to the interaction of asperities on the upper and lower surfaces, the piston–cylinder interface suffers severe lubrication and sealing problems during mixed lubrication. This study aims to establish a mixed thermo-elastohydrodynamic (EHD) model for the lubrication gap to determine how working conditions affect the lubricating characteristics and sealing performance of the interface.

A mixed thermo-EHD lubrication model is established to investigate the lubricating characteristics and sealing performance of the interface between the piston and cylinder. The model considers piston tilting, thermal effect, surface roughness and bushing deformation. The interface lubricating characteristics and sealing performance under different working conditions are calculated by the proposed numerical model.

A higher inlet pressure contributes to an increase in the minimum film thickness. Increased shaft speed can significantly reduce the minimum film thickness, resulting in severe wear. Compared to roughness, the impact of the thermal effect on the interface sealing performance is more significant.

The proposed lubrication model in this study offers a theoretical framework to evaluate the lubricating characteristics and sealing performance at the lubrication gap. Furthermore, the results provide references for properly selecting piston-cylinder surface processing parameters.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2023-0072/

This paper aims to investigate the effects of inertia of the lubricant on the performance parameters of journal bearings textured with spherical-shaped textures.

The lubricant is assumed to be Newtonian, and the flow is considered laminar. Considering the lubricant inertia effects, the modified Reynolds equation is discretized using the finite difference method and solved with the Gauss–Seidel successive over-relaxation scheme using the progressive mesh densification method.

The results from this numerical study indicate that the lubricant inertia improves textured journal bearing performance characteristics significantly. The improvement is more significant in the case of heavily loaded bearings. Furthermore, it is observed that protruded texturing in journal bearings shows better results compared to dimple textured journal bearings.

Understanding the effect of lubricant inertia is essential for efficiently designing textured journal bearings. Thus, the results shown here would be helpful for the researchers and the bearing designers.

Tribological research is complex and multidisciplinary, with many parameters to consider. As traditional experimentation is time-consuming and expensive due to the complexity of tribological systems, researchers tend to use quantitative and qualitative analysis to monitor critical parameters and material characterization to explain observed dependencies. In this regard, numerical modeling and simulation offers a cost-effective alternative to physical experimentation but must be validated with limited testing. This paper aims to highlight advances in numerical modeling as they relate to the field of tribology.

This study performed an in-depth literature review for the field of modeling and simulation as it relates to tribology. The authors initially looked at the application of foundational studies (e.g. Stribeck) to understand the gaps in the current knowledge set. The authors then evaluated a number of modern developments related to contact mechanics, surface roughness, tribofilm formation and fluid-film layers. In particular, it looked at key fields driving tribology models including nanoparticle research and prosthetics. The study then sought out to understand the future trends in this research field.

The field of tribology, numerical modeling has shown to be a powerful tool, which is both time- and cost-effective when compared to standard bench testing. The characterization of tribological systems of interest fundamentally stems from the lubrication regimes designated in the Stribeck curve. The prediction of tribofilm formation, film thickness variation, fluid properties, asperity contact and surface deformation as well as the continuously changing interactions between such parameters is an essential challenge for proper modeling.

This paper highlights the major numerical modeling achievements in various disciplines and discusses their efficacy, assumptions and limitations in tribology research.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2023-0076/

The current trend of modern industry is to use machineries which rotate at high speed along with the capability of carrying heavy rotor loads. This paper aims at static thermal analysis of two different profiles of non-circular journal bearings – a true elliptical bearing and orthogonal bearing.

The Reynolds equation has been solved through finite difference method to compute the oil film pressure. Parabolic temperature profile approximation technique has been used to solve the energy equation and thus used for computation of various bearing performance characteristics such as thermo-hydrodynamic oil film pressure, temperature, load capacity, Sommerfeld number and power loss characteristics across the bearing. The effect of ellipticity ratio on the bearing performance characteristics has also been obtained for both the elliptical and vertical offset bearing using three different commercially available grades of oil (Hydrol 32, 68 and 100).

It has been observed that the thermo-hydrodynamic pressure and temperature rise of the oil film is less in orthogonal bearing as compared to the true elliptical bearing for same operating conditions. The effect of ellipticity ratio of non-circularity on bearing performance parameters have been observed to be less in case of elliptical bearing as compared to orthogonal bearing. It has been concluded that though the rise in oil film temperature is high for true elliptical bearing, but still it should be preferred over orthogonal profile under study, as it has comparably good load-carrying capacity.

The performance parametric analysis will help the designers to select such kind of non-circular journal bearing for various applications.

This paper aims to give the guidance for the design of the bearing.

The finite element method, the multi-body dynamics method, the finite difference method and the tribology are combined to analyze the lubrication.

The performance parameters of crankshaft-bearing system such as the misalignment, the oil filling ratio and the oil groove are also investigated. Misalignment causes the pressure to incline on one side and the pressure increases obviously. Filling ratio has great relationship with pressure distribution; the factors influencing the filling ratio are also analyzed. Different oil groove models are investigated, as it can provide the theory for oil groove design, and three factors above are always combined to influence the lubrication characteristics.

The optimization of bearing system is conducted by orthogonal test and neural network, unlike the linear optimization theory. Neural network uses the nonlinear theory to optimize crankshaft-bearing system.