Search results
1 – 10 of over 3000Shariful Islam and Shaikh Md. Mominul Alam
The purpose of this paper is to investigate the acoustic properties of needle-punched nonwovens produced of bamboo, banana and hemp fibers blended with polyester (PET) and…
Abstract
Purpose
The purpose of this paper is to investigate the acoustic properties of needle-punched nonwovens produced of bamboo, banana and hemp fibers blended with polyester (PET) and polypropylene (PP) as they are supportive enough to minimize sound transmission inside the automobiles.
Design/methodology/approach
Textile materials like bamboo, banana and hemp blended with PET and PP in the ratio of 35:35:30 were applied to make the web. The needle-punching technique was applied to each web for three times to form a full nonwoven textile composite. The concept of PET/PP blend with natural fibers was to enhance the consistency and thermoform propensity of the composites. When nonwoven textile composites were placed in between a sound source and a receiver, they absorbed annoying sound by dissolving sound wave energy. Sound absorption coefficient was measured by the impedance tube method as per ASTM C384 Standard. Bamboo/PET/PP composite showed the highest absorption coefficient in most of the frequencies.
Findings
Physical and comfort properties were tested for the composites and it was noticed that bamboo/PET/PP composites with its compressed structure showed a better stiffness value, lesser thermal conductivity, lesser air permeability, better absorption coefficient and highest sound transmission loss compared to other two composites. At 840 Hz, the absorption coefficient of bamboo/PET/PP remained in satisfactory level but it was inferior by 20 percent in banana/PET/PP. Conversely at more frequencies like 1,680 Hz, there was a decrease from the target level in all the nonwovens composites, which could be enhanced by raising the thickness of the nonwovens, and all these properties of bamboo/PET/PP were considered appropriate for controlling noise inside the vehicles.
Practical implications
This research will provide facilities to decrease noise inside the vehicles. It will improve the apparent value of the automobiles to the traveler and also provide a sensible goodwill to the manufacturer.
Originality/value
This research will open several ways for the development of different nonwoven composites, particularly for the sound absorption and will open possible ways for the scholars to further study in this field.
Details
Keywords
Matthew Li, David Allinson and Kevin Lomas
The purpose of this paper is to identify the impact of traditionally unmonitored energy sources and sinks on assessment of the as-built thermal performance of occupied homes. The…
Abstract
Purpose
The purpose of this paper is to identify the impact of traditionally unmonitored energy sources and sinks on assessment of the as-built thermal performance of occupied homes. The analysis aims to demonstrate the potential scale of uncertainties introduced in a heat balance estimation of the heat transfer coefficient (HTC) when using in-use monitored data.
Design/methodology/approach
Energy flows for two UK homes – one a 1930s dwelling with high heat loss, the second a higher-performing 2014-built home – are predicted using the UK Government’s standard assessment procedure (SAP) and visualised using Sankey diagrams. Selected modelled energy flows are used as inputs in a quasi-steady state heat balance to calculate in-use HTCs as if from measured data sets gathered in occupied homes. The estimated in-use HTCs are compared against SAP-calculated values to illustrate the impact of including or omitting various heat sources and sinks.
Findings
The results demonstrate that for dwellings with low heat loss, the increased proportion of heating demand met by unmetered internal and solar gains informs a greater sensitivity of a heat balance estimation of the HTC to their omission. While simple quasi-steady state heat balance methods may be appropriate for dwellings with very high heat loss, alternative approaches are likely to be required for those with lower heat loss.
Originality/value
A need to understand the impacts of unmetered heat flows on the accuracy with which a building’s thermal performance may be inferred from in-use monitored data is identified: this paper illustrates the scale of these impacts for two homes at opposite ends of the energy performance scale.
Details
Keywords
Ricardo Andres García-León, Wilder Quintero-Quintero and Magda Rodriguez-Castilla
The braking system on motorcycles is of vital importance, taking into account that its operation is based on the friction between the surfaces in the contact that are found heat…
Abstract
Purpose
The braking system on motorcycles is of vital importance, taking into account that its operation is based on the friction between the surfaces in the contact that are found heat and, therefore, the brake liquid, the thermoelastic deformation on the contact surface, the degradation and failure of the material, as can be attributed to the safety of the occupants. The purpose of this paper is to perform mathematical calculations regarding the phenomena of the transfer of heat generated in the brake system.
Design/methodology/approach
Using SolidWorks simulation software, the geometric model of the three disc brakes of the different cylinders was carried out to identify the elements with the variations of the maximum temperature, and the verification with the calculations was made under ideal condition (80 Km/h and 12°C).
Findings
The results obtained show that with the mathematical calculations it was possible to validate the correct functioning of the braking system under different operating conditions, the systems that have higher capacity of displacement generate higher heat loss at higher speed so that their time of cooling according to Newton is major.
Originality/value
Through the analysis of finite elements, it was possible to identify that the braking system in severe working conditions is not overheated, assuring a natural convection cooling in approximately 12 min according to the mathematical calculations made.
This paper aims to understand the effect of different foundation designs of passive house on the resultant thermal bridges, at the junction between a wall and a slab on grade.
Abstract
Purpose
This paper aims to understand the effect of different foundation designs of passive house on the resultant thermal bridges, at the junction between a wall and a slab on grade.
Design/methodology/approach
The linear thermal transmittances of some newly developed foundations of passive house are determined. The investigated foundation designs are L-element, U-element and foundation with foam glass technique.
Findings
It is found that the special design of passive house foundation can considerably influence the heat flow through thermal bridges. In this context, it is proposed a new foundation design of passive house, which has relatively low heat loss through thermal bridges. The results are compared with the “default” ISO values used to evaluate the effect of thermal bridges in typical buildings. It is found that there is large difference between the calculated linear thermal transmittances at the investigated foundations of passive house as compared to typical buildings.
Practical implications
The results can hopefully be used to improve the energy efficiency of the passive house.
Social implications
Sustainable solution of buildings.
Originality/value
A new foundation design of passive house is suggested to reduce heat loss through thermal bridges.
Details
Keywords
Priyadharsini Sivaraj and Sivaraj Chinnasamy
This paper aims to examine the thermal transmission and entropy generation of hybrid nanofluid filled containers with solid body inside. The solid body is seen as being both…
Abstract
Purpose
This paper aims to examine the thermal transmission and entropy generation of hybrid nanofluid filled containers with solid body inside. The solid body is seen as being both isothermal and capable of producing heat. A time-dependent non-linear partial differential equation is used to represent the transfer of heat through a solid body. The current study’s objective is to investigate the key properties of nanoparticles, external forces and particular attention paid to the impact of hybrid nanoparticles on entropy formation. This investigation is useful for researchers studying in the area of cavity flows to know features of the flow structures and nature of hybrid nanofluid characteristics. In addition, a detailed entropy generation analysis has been performed to highlight possible regimes with minimal entropy generation rates. Hybrid nanofluid has been proven to have useful qualities, making it an attractive coolant for an electrical device. The findings would help scientists and engineers better understand how to analyse convective heat transmission and how to forecast better heat transfer rates in cutting-edge technological systems used in industries such as heat transportation, power generation, chemical production and passive cooling systems for electronic devices.
Design/methodology/approach
Thermal transmission and entropy generation of hybrid nanofluid are analysed within the enclosure. The domain of interest is a square chamber of size L, including a square solid block. The solid body is considered to be isothermal and generating heat. The flow driven by temperature gradient in the cavity is two-dimensional. The governing equations, formulated in dimensionless primitive variables with corresponding initial and boundary conditions, are worked out by using the finite volume technique with the SIMPLE algorithm on a uniformly staggered mesh. QUICK and central difference schemes were used to handle convective and diffusive elements. In-house code is developed using FORTRAN programming to visualize the isotherms, streamlines, heatlines and entropy contours, which are handled by Tecplot software. The influence of nanoparticles volume fraction, heat generation factor, external magnetic forces and an irreversibility ratio on energy transport and flow patterns is examined.
Findings
The results show that the hybrid nanoparticles concentration augments the thermal transmission and the entropy production increases also while the augmentation of temperature difference results in a diminution of entropy production. Finally, magnetic force has the significant impact on heat transfer, isotherms, streamlines and entropy. It has been observed that the external magnetic force plays a good role in thermal regulations.
Research limitations/implications
Hybrid nanofluid is a desirable coolant for an electrical device. Various nanoparticles and their combinations can be analysed. Ferro-copper hybrid nanofluid considered with the help of prevailing literature review. The research would benefit scientists and engineers by improving their comprehension of how to analyses convective heat transmission and forecast more accurate heat transfer rates in various fields.
Practical implications
Due to its helpful characteristics, ferrous-copper hybrid nanofluid is a desirable coolant for an electrical device. The research would benefit scientists and engineers by improving their comprehension of how to analyse convective heat transmission and forecast more accurate heat transfer rates in cutting-edge technological systems used in sectors like thermal transportation, cooling systems for electronic devices, etc.
Social implications
Entropy generation is used for an evaluation of the system’s performance, which is an indicator of optimal design. Hence, in recent times, it does a good engineering sense to draw attention to irreversibility under magnetic force, and it has an indispensable impact on investigation of electronic devices.
Originality/value
An efficient numerical technique has been developed to solve this problem. The originality of this work is to analyse convective energy transport and entropy generation in a chamber with internal block, which is capable of maintaining heat and producing heat. Effects of irreversibility ratio are scrutinized for the first time. Analysis of convective heat transfer and entropy production in an enclosure with internal isothermal/heat generating blocks gives the way to predict enhanced heat transfer rate and avoid the failure of advanced technical systems in industrial sectors.
Details
Keywords
K. Thirumalaisamy and A. Subramanyam Reddy
The analysis of fluid flow and thermal transport performance inside the cavity has found numerous applications in various engineering fields, such as nuclear reactors and solar…
Abstract
Purpose
The analysis of fluid flow and thermal transport performance inside the cavity has found numerous applications in various engineering fields, such as nuclear reactors and solar collectors. Nowadays, researchers are concentrating on improving heat transfer by using ternary nanofluids. With this motivation, the present study analyzes the natural convective flow and heat transfer efficiency of ternary nanofluids in different types of porous square cavities.
Design/methodology/approach
The cavity inclination angle is fixed ω = 0 in case (I) and
Findings
The average heat transfer rate is computed for four combinations of ternary nanofluids:
Practical implications
The purpose of this study is to determine whether the ternary nanofluids may be used to achieve the high thermal transmission in nuclear power systems, generators and electronic device applications.
Social implications
The current analysis is useful to improve the thermal features of nuclear reactors, solar collectors, energy storage and hybrid fuel cells.
Originality/value
To the best of the authors’ knowledge, no research has been carried out related to the magneto-hydrodynamic natural convective
Details
Keywords
The purpose of this study is to present how the thermal energy transmission of circular parts produced in robotized gas metal arc (GMA)-based additive manufacturing was affected…
Abstract
Purpose
The purpose of this study is to present how the thermal energy transmission of circular parts produced in robotized gas metal arc (GMA)-based additive manufacturing was affected by the substrate shape through finite element analysis, including distributions of thermal energy and temperature gradient in the molten pool and deposited layers.
Design/methodology/approach
Three geometric shapes, namely, square, rectangle and round were chosen in simulation, and validation tests were carried out by corresponding experiments.
Findings
The thermal energy conduction ability of the deposited layers is the best on the round substrate and the worst on the rectangular substrate. The axial maximum temperature gradients in the molten pool along the deposition path with the round substrate are the largest during the deposition process. At the deposition ending moment, the circumferential temperature gradients of all layers with the round substrate are the largest. A large temperature gradient usually stands for a good heat conduction condition. Altogether, the round substrate is more suitable for the fabrication of circular thin-walled parts.
Originality/value
The predicted thermal distributions of the circular thin-walled part with various substrate shapes are helpful to understand the influence of substrate shape on the thermal energy transmission behavior in GMA-based additive manufacturing.
Details
Keywords
Obed Ofori Yemoh, Richard Opoku, Gabriel Takyi, Ernest Kwadwo Adomako, Felix Uba and George Obeng
This study has assessed the thermal performance of locally fabricated bio-based building envelopes made of coconut and corn husk composite bricks to reduce building wall heat…
Abstract
Purpose
This study has assessed the thermal performance of locally fabricated bio-based building envelopes made of coconut and corn husk composite bricks to reduce building wall heat transmission load and energy consumption towards green building adaptation.
Design/methodology/approach
Samples of coconut fiber (coir) and corn husk fiber bricks were fabricated and tested for their thermophysical properties using the Transient Plane Source (TPS) 2500s instrument. A simulation was conducted using Dynamic Energy Response of Building - Lunds Tekniska Hogskola (DEROB-LTH) to determine indoor temperature variation over 24 h. The time lag and decrement factor, two important parameters in evaluating building envelopes, were also determined.
Findings
The time lag of the bio-based composite building envelope was found to be in the range of 4.2–4.6 h for 100 mm thickness block and 10.64–11.5 h for 200 mm thickness block. The decrement factor was also determined to be in the range of 0.87–0.88. The bio-based composite building envelopes were able to maintain the indoor temperature of the model from 25.4 to 27.4 °C, providing a closely stable indoor thermal comfort despite varying outdoor temperatures. The temperature variation in 24 h, was very stable for about 8 h before a degree increment, providing a comfortable indoor temperature for occupants and the need not to rely on air conditions and other mechanical forms of cooling. Potential energy savings also peaked at 529.14 kWh per year.
Practical implications
The findings of this study present opportunities to building developers and engineers in terms of selecting vernacular materials for building envelopes towards green building adaptation, energy savings, reduced construction costs and job creation.
Originality/value
This study presents for the first time, time lag and decrement factor for bio-based composite building envelopes for green building adaptation in hot climates, as found in Ghana.
Details
Keywords
Pelin Altay, Selin Hanife Eryürük, Gülay Özcan, Didem Öztürk, Melda Naz Saral and Çağla Altınordu
Firefighters are exposed to high outdoor temperature and heat stress caused by metabolic activities during firefighting and should wear protective clothing to ensure their safety…
Abstract
Purpose
Firefighters are exposed to high outdoor temperature and heat stress caused by metabolic activities during firefighting and should wear protective clothing to ensure their safety and health. Traditional firefighter protective suits are bulky and heavy garments with reduced thermal comfort properties since the fabric thickness and moisture barrier layers prevent heat transfer of the garment and cause additional heat stress. The aim of this study is to reduce heat stress by creating a new fabric design with silica aerogel membrane as a moisture barrier for three-layer fabric system.
Design/methodology/approach
Polyacrylonitrile (PAN) nanofibers were produced with three different silica aerogel contents and used for three-layered clothing system as a moisture barrier for giving desired protectiveness and thermal comfort to firefighters. Different fabric combinations were designed using two types of outer shell fabrics, two types of moisture barrier fabrics, two types of thermal barrier fabrics and PAN/silica aerogel membranes.
Findings
The results show that a lighter fabric system with improved wearer’s mobility and thermal comfort properties (thermal resistance and moisture permeability) is achieved with the use of PAN/silica aerogel membrane as an intermediate layer compared to commercial thermal protective fabric systems.
Originality/value
Differently from traditional thermal protective clothing, which may not provide adequate protection in long-term heat conditions or when exposed to flash fire, a new thermal protective clothing has been developed to be used in extremely hot environments, providing desired technical and performance properties, ease to wear comfort.
Details
Keywords
Fateh Mebarek-Oudina, Ines Chabani, Hanumesh Vaidya and Abdul Aziz I. Ismail
This paper aims to present a numerical study that investigates the flow of MgO-Al2O3/water hybrid nanofluid inside a porous elliptical-shaped cavity, in which we aim to examine…
Abstract
Purpose
This paper aims to present a numerical study that investigates the flow of MgO-Al2O3/water hybrid nanofluid inside a porous elliptical-shaped cavity, in which we aim to examine the performance of this thermal system when exposed to a magnetic field via heat transfer features and entropy generation.
Design/methodology/approach
The configuration consists of the hybrid nanofluid out layered by a cold ellipse while it surrounds a non-square heated obstacle; the thermal structure is under the influence of a horizontal magnetic field. This problem is implemented in COMSOL multiphysics, which solves the related equations described by the “Darcy-Forchheimer-Brinkman” model through the finite element method.
Findings
The results illustrated as streamlines, isotherms and average Nusselt number, along with the entropy production, are given as functions of: the volume fraction, and shape factor to assess the behaviour of the properties of the nanoparticles. Darcy number and porosity to designate the impact of the porous features of the enclosure, and finally the strength of the magnetic induction described as Hartmann number. The outcomes show the increased pattern of the thermal and dynamical behaviour of the hybrid nanofluid when augmenting the concentration, shape factor, porosity and Darcy number; however, it also engenders increased formations of irreversibilities in the system that were revealed to enhance with the permeability and the great properties of the nanofluid. Nevertheless, this thermal enhanced pattern is shown to degrade with strong Hartmann values, which also reduced both thermal and viscous entropies. Therefore, it is advised to minimize the magnetic influence to promote better heat exchange.
Originality/value
The investigation of irreversibilities in nanofluids heat transfer is an important topic of research with practical implications for the design and optimization of heat transfer systems. The study’s findings can help improve the performance and efficiency of these systems, as well as contribute to the development of sustainable energy technologies. The study also offers an intriguing approach that evaluates entropy growth in this unusual configuration with several parameters, which has the potential to transform our understanding of complicated fluid dynamics and thermodynamic processes, and at the end obtain the best thermal configuration possible.
Details