Search results

This paper aims to investigate the thermal performance of equivalent square and circular thermal systems and compare the heat transport and irreversibility of magnetohydrodynamic (MHD) nanofluid flow within these systems.

The research uses a constraint-based approach to analyze the impact of geometric shapes on heat transfer and irreversibility. Two equivalent systems, a square cavity and a circular cavity, are examined, considering identical heating/cooling lengths and fluid flow volume. The analysis includes parameters such as magnetic field strength, nanoparticle concentration and accompanying irreversibility.

This study reveals that circular geometry outperforms square geometry in terms of heat flow, fluid flow and heat transfer. The equivalent circular thermal system is more efficient, with heat transfer enhancements of approximately 17.7%. The corresponding irreversibility production rate is also higher, which is up to 17.6%. The total irreversibility production increases with Ra and decreases with a rise in Ha. However, the effect of magnetic field orientation (γ) on total EG is minor.

Further research can explore additional geometric shapes, orientations and boundary conditions to expand the understanding of thermal performance in different configurations. Experimental validation can also complement the numerical analysis presented in this study.

This research introduces a constraint-based approach for evaluating heat transport and irreversibility in MHD nanofluid flow within square and circular thermal systems. The comparison of equivalent geometries and the consideration of constraint-based analysis contribute to the originality and value of this work. The findings provide insights for designing optimal thermal systems and advancing MHD nanofluid flow control mechanisms, offering potential for improved efficiency in various applications.

The purpose of this study is to investigate the influence of enclosure shape on magnetohydrodynamic (MHD) nanofluidic flow, heat transfer and irreversibility in square, trapezoidal and triangular thermal systems under fluid volume constraints, with the aim of optimizing thermal behavior in diverse applications.

The study uses numerical simulations based on a finite element-based technique to analyze the effects of the Rayleigh number (Ra), Hartmann number (Ha), magnetic field orientation (γ) and nanoparticle concentration (ζ) on heat transfer characteristics and thermodynamic entropy production.

The key findings reveal that the geometrical design significantly influences fluid velocity, heat transfer and irreversibility. Trapezoidal thermal systems outperform square systems, while triangular systems achieve optimal enhancement. Nanoparticle concentration enhances heat transfer and flow strength at higher Rayleigh numbers. The magnetic field intensity has a significant impact on fluid flow and heat transport in natural convection, with higher Hartmann numbers resulting in reduced flow strength and heat transfer. The study also highlights the influence of various parameters on thermodynamic entropy production.

Further research can explore additional geometries, parameters and boundary conditions to expand the understanding of enclosure shape effects on MHD nanofluidic flow and heat transfer. Experimental validation can complement the numerical simulations presented in this study.

This study provides valuable insights into the impact of enclosure shape on heat transfer performance in MHD nanofluid flow systems. The findings contribute to the optimization of thermal behavior in applications such as electronics cooling and energy systems. The comparison of different enclosure shapes and the analysis of thermodynamic entropy production add novelty to the study.

This paper aims to examine the thermal transmission and entropy generation of hybrid nanofluid filled containers with solid body inside. The solid body is seen as being both isothermal and capable of producing heat. A time-dependent non-linear partial differential equation is used to represent the transfer of heat through a solid body. The current study’s objective is to investigate the key properties of nanoparticles, external forces and particular attention paid to the impact of hybrid nanoparticles on entropy formation. This investigation is useful for researchers studying in the area of cavity flows to know features of the flow structures and nature of hybrid nanofluid characteristics. In addition, a detailed entropy generation analysis has been performed to highlight possible regimes with minimal entropy generation rates. Hybrid nanofluid has been proven to have useful qualities, making it an attractive coolant for an electrical device. The findings would help scientists and engineers better understand how to analyse convective heat transmission and how to forecast better heat transfer rates in cutting-edge technological systems used in industries such as heat transportation, power generation, chemical production and passive cooling systems for electronic devices.

Thermal transmission and entropy generation of hybrid nanofluid are analysed within the enclosure. The domain of interest is a square chamber of size L, including a square solid block. The solid body is considered to be isothermal and generating heat. The flow driven by temperature gradient in the cavity is two-dimensional. The governing equations, formulated in dimensionless primitive variables with corresponding initial and boundary conditions, are worked out by using the finite volume technique with the SIMPLE algorithm on a uniformly staggered mesh. QUICK and central difference schemes were used to handle convective and diffusive elements. In-house code is developed using FORTRAN programming to visualize the isotherms, streamlines, heatlines and entropy contours, which are handled by Tecplot software. The influence of nanoparticles volume fraction, heat generation factor, external magnetic forces and an irreversibility ratio on energy transport and flow patterns is examined.

The results show that the hybrid nanoparticles concentration augments the thermal transmission and the entropy production increases also while the augmentation of temperature difference results in a diminution of entropy production. Finally, magnetic force has the significant impact on heat transfer, isotherms, streamlines and entropy. It has been observed that the external magnetic force plays a good role in thermal regulations.

Hybrid nanofluid is a desirable coolant for an electrical device. Various nanoparticles and their combinations can be analysed. Ferro-copper hybrid nanofluid considered with the help of prevailing literature review. The research would benefit scientists and engineers by improving their comprehension of how to analyses convective heat transmission and forecast more accurate heat transfer rates in various fields.

Due to its helpful characteristics, ferrous-copper hybrid nanofluid is a desirable coolant for an electrical device. The research would benefit scientists and engineers by improving their comprehension of how to analyse convective heat transmission and forecast more accurate heat transfer rates in cutting-edge technological systems used in sectors like thermal transportation, cooling systems for electronic devices, etc.

Entropy generation is used for an evaluation of the system’s performance, which is an indicator of optimal design. Hence, in recent times, it does a good engineering sense to draw attention to irreversibility under magnetic force, and it has an indispensable impact on investigation of electronic devices.

An efficient numerical technique has been developed to solve this problem. The originality of this work is to analyse convective energy transport and entropy generation in a chamber with internal block, which is capable of maintaining heat and producing heat. Effects of irreversibility ratio are scrutinized for the first time. Analysis of convective heat transfer and entropy production in an enclosure with internal isothermal/heat generating blocks gives the way to predict enhanced heat transfer rate and avoid the failure of advanced technical systems in industrial sectors.

The purpose of this study is to advance turbulent thermal convection inside the constant heat-flux round tube inserted by multiple perforated twisted tapes.

The novel design of this study is accomplished by inserting several twisted tapes and drilling some circular perforations near the tape edge (C1, C3, C5: solid tapes; C2, C4, C6: perforated tapes). The turbulence flow appearances and thermal convective features are examined for various Reynolds numbers (8,000–14,000) using the renormalization group (RNG) κ−ε turbulent model and Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm.

The simulated outcomes reveal that inserting more perforated-twisted tapes into the heated round tube promotes turbulent thermal convection effectively. A swirling flow caused by the twisted tapes to produce the secondary flow jets between two reverse-spin tapes can combine with the main flow passing through the perforations at the outer edge to enhance the vortex flow. The primary factors are the quantity of twisted tapes and with/without perforations, as the perforation ratio remains at 2.5 in this numerical work. Weighing friction along the tube, C6 (four reverse-spin perforated-twisted tapes) brings the uppermost thermal-hydraulic performance of 1.23 under Re = 8,000.

The constant thermo-hydraulic attributes of liquid water and the steady Newtonian fluid are research limitations for this simulated work.

The simulated outcomes will avail the inner-pipe design of a heat exchanger inserted by multiple perforated twisted tapes to enhance superior heat transfer.

These twisted tapes form tiny circular perforations along the tape edge to introduce the fluid flow through these bores and combine with the secondary flow induced between two reverse-spin tapes. This scheme enhances the swirling flow, turbulence intensity and fluid mixing to advance thermal convection since larger perforations cannot produce large jet velocity or the position of perforations is too far from the tape edge to generate a separated flow. Consequently, this work contributes a valuable cooling mechanism toward thermal engineering.

Natural convection in finite enclosures is a common phenomenon in various thermal applications. To provide the thermal design guidelines, this study aims to numerically explore the potential of using internal baffles and nanofluids to either enhance or suppress heat transport in a vertical annulus. Furthermore, the annular-shaped enclosure is filled with aqueous-silver nanofluid and the effects of five distinct nanoparticle shapes are examined. In addition, the influence of baffle design parameters, including baffle position, thickness and length, is thoroughly analyzed.

The finite difference method is used in conjunction with the alternating direction implicit and successive line over relaxation techniques to solve nonlinear and coupled partial differential equations. The single phase model is used for nanofluid which is considered as a homogeneous fluid with improved thermal properties. The independence tests are carried out for assessing the sufficiency of grid size and time step for obtaining results accurately.

The baffle dimension parameters and nanoparticle shape exhibit significant impact on the convective flow and heat transfer characteristics, leading to the following results: sphere- and blade-shaped nanoparticles demonstrate around 30% enhancement in the heat transport capability compared with platelet-shaped nanoparticles, which exhibit the least. When considering the baffle design parameter, either a decrease in the baffle length and thickness or an increase in baffle height leads to an improvement in heat transport rate. Consequently, a threefold increase in baffle height yields a 40% improvement in thermal performance.

Understanding the impact of nanoparticle shapes and baffle design parameters on flow and thermal behavior will enable engineers to provide valuable insight on thermal management and overall system efficiency. Therefore, the current work focuses on exploring buoyant nanofluid flow and thermal mechanism in a baffled annular-shaped enclosure. Specifically, an internal baffle that exhibits conductive heat transfer through it is considered, and the impact of baffle dimensions (thickness, length and position) on the fluid flow behavior and thermal characteristics is investigated. In addition, the current study also addresses the influence of five distinct nanoparticle shapes (e.g. spherical, cylindrical, platelet, blade and brick) on the flow and thermal behavior in the baffled annular geometry. In addition to deepening the understanding of nanofluid behavior in a baffled vertical annulus, the current study contributes to the ongoing advancements in thermal applications by providing certain guidelines to design application-specific enclosures.

This study aims to investigate the impact of different heater geometries (flat, rectangular, semi-elliptical and triangular) on hybrid nanofluidic (Cu–Al₂O₃–H₂O) convection in novel umbrella-shaped porous thermal systems. The system is top-cooled, and the identical heater surfaces are provided centrally at the bottom to identify the most enhanced configuration.

The thermal-fluid flow analysis is performed using a finite volume-based indigenous code, solving the nonlinear coupled transport equations with the Darcy number (10^–5 ≤ Da ≤ 10^–1), modified Rayleigh number (10 ≤ Ra_m ≤ 10⁴) and Hartmann number (0 ≤ Ha ≤ 70) as the dimensionless operating parameters. The semi-implicit method for pressure linked equations algorithm is used to solve the discretized transport equations over staggered nonuniform meshes.

The study demonstrates that altering the heater surface geometry improves heat transfer by up to 224% compared with a flat surface configuration. The triangular-shaped heating surface is the most effective in enhancing both heat transfer and flow strength. In general, flow strength and heat transfer increase with rising Ra_m and decrease with increasing Da and Ha. The study also proposes a mathematical correlation to predict thermal characteristics by integrating all geometric and flow control variables.

The present concept can be extended to further explore thermal performance with different curvature effects, orientations, boundary conditions, etc., numerically or experimentally.

The present geometry configurations can be applied in various engineering applications such as heat exchangers, crystallization, micro-electronic devices, energy storage systems, mixing processes, food processing and different biomedical systems (blood flow control, cancer treatment, medical equipment, targeted drug delivery, etc.).

This investigation contributes by exploring the effect of various geometric shapes of the heated bottom on the hydromagnetic convection of Cu–Al₂O₃–H₂O hybrid nanofluid flow in a complex umbrella-shaped porous thermal system involving curved surfaces and multiphysical conditions.

The purpose of this paper is to address various works on mixed convection and proposes 10 unified models (Models 1–10) based on various thermal and kinematic conditions of the boundary walls, thermal conditions and/ or kinematics of objects embedded in the cavities and kinematics of external flow field through the ventilation ports. Experimental works on mixed convection have also been addressed.

This review is based on 10 unified models on mixed convection within cavities. Models 1–5 involve mixed convection based on the movement of single or double walls subjected to various temperature boundary conditions. Model 6 elucidates mixed convection due to the movement of single or double walls of cavities containing discrete heaters at the stationary wall(s). Model 7A focuses mixed convection based on the movement of wall(s) for cavities containing stationary solid obstacles (hot or cold or adiabatic) whereas Model 7B elucidates mixed convection based on the rotation of solid cylinders (hot or conductive or adiabatic) within the cavities enclosed by stationary or moving wall(s). Model 8 is based on mixed convection due to the flow of air through ventilation ports of cavities (with or without adiabatic baffles) subjected to hot and adiabatic walls. Models 9 and 10 elucidate mixed convection due to flow of air through ventilation ports of cavities involving discrete heaters and/or solid obstacles (conductive or hot) at various locations within cavities.

Mixed convection plays an important role for various processes based on convection pattern and heat transfer rate. An important dimensionless number, Richardson number (Ri) identifies various convection regimes (forced, mixed and natural convection). Generalized models also depict the role of “aiding” and “opposing” flow and combination of both on mixed convection processes. Aiding flow (interaction of buoyancy and inertial forces in the same direction) may result in the augmentation of the heat transfer rate whereas opposing flow (interaction of buoyancy and inertial forces in the opposite directions) may result in decrease of the heat transfer rate. Works involving fluid media, porous media and nanofluids (with magnetohydrodynamics) have been highlighted. Various numerical and experimental works on mixed convection have been elucidated. Flow and thermal maps associated with the heat transfer rate for a few representative cases of unified models [Models 1–10] have been elucidated involving specific dimensionless numbers.

This review paper will provide guidelines for optimal design/operation involving mixed convection processing applications.

This study aims to numerically investigate the thermal-hydrodynamic performance of silicon oxide/water nanofluid laminar flow in the heat sink miniature channel with different fin cross-sections. The effect of the fin cross-section including semi-circular, rectangular and quadrant in two directions of flat and curved, and channel substrate materials of steel, aluminum, copper and titanium were examined. Finally, the analysis of thermal and frictional entropy generation in different channels is performed.

According to the numerical results, the highest heat transfer coefficients belong to the rectangular, quadrant 2, quadrant 1 and semi-circular fins compared to the channel without fin is 38.65%, 29.94%, 27.45% and 17.1%, respectively. Also, the highest performance evaluation criteria belong to the rectangular and quadrant 2 fins, which have 1.35 and 1.29, respectively. Based on the thermal conductivity of the substrate material, the best material is copper. According to the results of entropy analysis, the reduction of thermal irreversibility of the channel with rectangular, quadrant 1, quadrant 2 and semi-circular compared to non-finned channel is equal to 72%, 57%, 63% and 48%, respectively.

The rectangular and quadrant 2 fins are the best fins and the copper substrate material is the best material to reduce the entropy generation.

The silicon oxide/water nanofluid flow in the heat sink miniature channel with various fin shapes and the curvature angle against the fluid flow was simulated to increase the heat transfer performance. The whole test section is simulated in three-dimensional. Different channel materials have been investigated to find the best channel substrate material.

Heat exchangers (HEs) which provide heat transfer and transfer energy through direct or indirect contact between fluids have an essential role in many processes as a part of various industries from pharmaceutical production to electronic devices. Using nanofluid as working fluid and integrating different types of turbulators could be used to upgrade the thermal effectiveness of HEs. Recently, to obtain more increment in thermal effectiveness, hybrid nanofluids are used that are prepared by mixing two or more various nanoparticles. The purpose of this experimental and numerical study is investigating different scenarios for improving the effectiveness of a concentric U-tube type HE.

In the numerical section of this study, different turbulator modifications, including circular and quarter circular rings, were modeled to determine the effect of adding turbulator on thermal performance. In addition, Al₂O₃/water and SiO₂/water single and Al₂O₃–SiO₂/water hybrid nanofluids were experimentally tested in an unmodified concentric U-tube HE in two different modes, including counter flow and parallel flow. Al₂O₃–SiO₂/water hybrid nanofluid was prepared at 2% (wt./wt.) particle ratio and compared with Al₂O₃/water and SiO₂/water single type nanofluids at same particle ratios and with distilled water.

Numerical modeling findings exhibited that integrating turbulators to the concentric tube type HE caused to raise in the effectiveness by improving heat transfer area. Also, experimental results indicated that using both hybrid and single type nanofluids notably upgraded the thermal performance of the concentric U-tube HE. Integrating turbulators cannot be an effective alternative in a concentric U-tube type HE with lower diameter because of raise in pressure drop. Numerically achieved findings exhibited that using quarter circular turbulators decreased pressure drop in comparison with circular turbulators. According to the experimental outcomes, using hybrid Al₂O₃–SiO₂/water nanofluid leads to obtain more thermal performance in comparison with single type nanofluids. The highest increment in overall heat transfer coefficient of HE by using Al₂O₃–SiO₂/water nanofluid achieved as 58.97% experimentally.

The overall outcomes of the current research exhibited the positive impacts of using hybrid nanofluid and integrating turbulators. In this empirical and numerical survey, numerical simulations were performed to specify the impact of applying different turbulators and hybrid nanofluid on the flow and thermal characteristics in a concentric U-tube HE. The achieved outcomes exhibited that using hybrid nanofluid can notably increase the thermal performance with negligible pressure drop in comparison with two different turbulator modifications.

The purpose of this paper is to review the available reduced order modeling approaches in the literature for predicting the flow and specially temperature fields inside data centers in terms of the involved design parameters.

This paper begins with a motivation for flow/thermal modeling needs for designing an energy‐efficient thermal management system in data centers. Recent studies on air velocity and temperature field simulations in data centers through computational fluid dynamics/heat transfer (CFD/HT) are reviewed. Meta‐modeling and reduced order modeling are tools to generate accurate and rapid surrogate models for a complex system. These tools, with a focus on low‐dimensional models of turbulent flows are reviewed. Reduced order modeling techniques based on turbulent coherent structures identification, in particular the proper orthogonal decomposition (POD) are explained and reviewed in more details. Then, the available approaches for rapid thermal modeling of data centers are reviewed. Finally, recent studies on generating POD‐based reduced order thermal models of data centers are reviewed and representative results are presented and compared for a case study.

It is concluded that low‐dimensional models are needed in order to predict the multi‐parameter dependent thermal behavior of data centers accurately and rapidly for design and control purposes. POD‐based techniques have shown great approximation for multi‐parameter thermal modeling of data centers. It is believed that wavelet‐based techniques due to the their ability to separate between coherent and incoherent structures – something that POD cannot do – can be considered as new promising tools for reduced order thermal modeling of complex electronic systems such as data centers

The paper reviews different numerical methods and provides the reader with some insight for reduced order thermal modeling of complex convective systems such as data centers.