Search results

Informed by acoustic design standards, the built environments are designed with single reverberation times (RTs), a trade-off between long and short RTs needed for different space functions. The novel intelligent passive room acoustic technology (IPRAT) has the potential to revolutionise room acoustics, thus, it is imperative to analyse and quantify its effect. IPRAT achieves real-time room acoustic improvement by integrating passive variable acoustic technology (PVAT) and acoustic scene classification (ASC). This paper aims to compare IPRAT simulation results with the AS/NZS 2107:2016 Australian/New Zealand recommended design acoustic standards.

In this paper 20 classroom environments are virtually configured for the simulation, multiplying 5 classrooms with 4 aural situations typical to New Zealand classrooms. The acoustic parameters RT, sound clarity (C50) and sound strength (G) are considered and analysed in the simulation. These parameters can be used to determine the effects of improved acoustics for both teacher vocal relief and student comprehension. The IPRAT was assumed to vary RT and was represented in the simulation by six different absorption coefficient spectrums.

The optimised acoustic parameters were derived from relationships between C50, RT and G. These relationships and optimal RTs contribute a unique database to literature. IPRAT’s advantages were discerned from a comparison of “current,” “attainable” and “optimised” acoustic parameters.

By quantifying the effect of IPRAT, it is understood that IPRAT has the potential to satisfy the key recommendations of professional industry standards (for New Zealand namely; AS/NZS 2107:2016 recommended design acoustic standards).

This paper aims to apply the novel numerical model to analyze the effect of pillar material on the response of compound quartz crystal resonator (QCR) with an array of pillars. The performance of the proposed device compared to conventional QCR method was also investigated.

A finite element method model was developed to analyze the behavior of QCR coupled with an array of pillars. The model was composed of an elastic pillar, a solution and a perfectly matched layer. The validation of the model was performed through a comparison between its predictions and previous experimental measurements. Notably, a good agreement was observed between the predicted results and the experimental data.

The effect of pillar Young’s modulus on the coupled QCR and pillars with a diameter of 20 µm, a center-to-center spacing of 40 µm and a density of 2,500 kg/m³ was investigated. The results indicate that multiple vibration modes can be obtained based on Young’s modulus. Notably, in the case of the QCR–pillar in air, the second vibration mode occurred at a critical Young’s modulus of 0.2 MPa, whereas the first mode was observed at 3.75 Mpa. The vibration phase analysis revealed phase-veering behavior at the critical Young’s modulus, which resulted in a sudden jump-and-drop frequency shift. In addition, the results show that the critical Young’s modulus is dependent on the surrounding environment of the pillar. For instance, the critical Young’s modulus for the first mode of the pillar is approximately 3.75 Mpa in air, whereas it increases to 6.5 Mpa in water.

It was concluded that the performance of coupled QCR–pillar devices significantly depends on the pillar material. Therefore, choosing pillar material at critical Young’s modulus can lead to the maximum frequency shift of coupled QCR–pillar devices. The model developed in this work helps the researchers design pillars to achieve maximum frequency shift in their measurements using coupled QCR–pillar.

This work compares the performance of the three boundary element techniques for solving Helmholtz problems: dual reciprocity, multiple reciprocity and direct interpolation. All techniques transform domain integrals into boundary integrals, despite using different principles to reach this purpose.

Comparisons here performed include the solution of eigenvalue and response by frequency scanning, analyzing many features that are not comprehensively discussed in the literature, as follows: the type of boundary conditions, suitable number of degrees of freedom, modal content, number of primitives in the multiple reciprocity method (MRM) and the requirement of internal interpolation points in techniques that use radial basis functions as dual reciprocity and direct interpolation.

Among the other aspects, this work can conclude that the solution of the eigenvalue and response problems confirmed the reasonable accuracy of the dual reciprocity boundary element method (DRBEM) only for the calculation of the first natural frequencies. Concerning the direct interpolation boundary element method (DIBEM), its interpolation characteristic allows more accessibility for solving more elaborate problems. Despite requiring a greater number of interpolating internal points, the DIBEM has presented higher-quality results for the eigenvalue and response problems. The MRM results were satisfactory in terms of accuracy just for the low range of frequencies; however, the neglected higher-order primitives impact the accuracy of the dynamic response as a whole.

There are safe alternatives for solving engineering stationary dynamic problems using the boundary element method (BEM), but there are no suitable comparisons between these different techniques. This paper presents the particularities and detailed comparisons approaching the accuracy of the three important BEM techniques, aiming at response and frequency evaluation, which are not found in the specialized literature.

In a coaxial ultrasonic flow sensor (UFS), wall thickness is a vital parameter of the measurement tube, especially those with small inner diameters. The paper aims to investigate the influence of wall thickness on the transient signal characteristics in an UFS.

First, the problem was researched experimentally using a series of measurement tubes with different wall thicknesses. Second, a finite element method–based model in the time domain was established to validate the experimental results and further discussion. Finally, the plane wave assumption and oblique incident theory were used to analyze the wave propagation in the tube, and an idea of wave packet superposition was proposed to reveal the mechanism of the influence of wall thickness.

Both experimental and simulated results showed that the signal amplitude decreased periodically as the wall thickness increased, and the corresponding waveform varied dramatically. Based on the analysis of wave propagation in the measurement tube, a formula concerning the phase difference between wave packets was derived to characterize the signal variation.

This paper provides a new and explicit explanation of the influence of wall thickness on the transient signal in a co-axial UFS. Both experimental and simulated results were presented, and the mechanism was clearly described.

This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device.

2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope.

The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the “rainbow ring” cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 µm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity.

Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.

The purpose of this study is to propose a fast method for predicting flow fields with periodic behavior with verification in the context of a radial turbine to meet the urgent requirement to effectively capture the unsteady flow characteristics in turbomachinery. Aiming at meeting the urgent requirement to effectively capture the unsteady flow characteristics in turbomachinery, a fast method for predicting flow fields with periodic behavior is proposed here, with verification in the context of a radial turbine (RT).

Sparsity-promoting dynamic mode decomposition is used to determine the dominant coherent structures of the unsteady flow for mode selection, and for flow-field prediction, the characteristic parameters including amplitude and frequency are predicted using one-dimensional Gaussian fitting with flow rate and two-dimensional triangulation-based cubic interpolation with both flow rate and rotation speed. The flow field can be rebuilt using the predicted characteristic parameters and the chosen model.

Under single flow-rate variation conditions, the turbine flow field can be recovered using the first seven modes and fitted amplitude modulus and frequency with less than 5% error in the pressure field and less than 9.7% error in the velocity field. For the operating conditions with concurrent flow-rate and rotation-speed fluctuations, the relative error in the anticipated pressure field is likewise within an acceptable range. Compared to traditional numerical simulations, the method requires a lot less time while maintaining the accuracy of the prediction.

It would be challenging and interesting work to extend the current method to nonlinear problems.

The method presented herein provides an effective solution for the fast prediction of unsteady flow fields in the design of turbomachinery.

A flow prediction method based on sparsity-promoting dynamic mode decomposition was proposed and applied into a RT to predict the flow field under various operating conditions (both rotation speed and flow rate change) with reasonable prediction accuracy. Compared with numerical calculations or experiments, the proposed method can greatly reduce time and resource consumption for flow field visualization at design stage. Most of the physics information of the unsteady flow was maintained by reconstructing the flow modes in the prediction method, which may contribute to a deeper understanding of physical mechanisms.

Wireless sensor networks (WSN), as a solution for buried water pipe monitoring, face a new set of challenges compared to traditional application for above-ground infrastructure monitoring. One of the main challenges for underground WSN deployment is the limited range (less than 3 m) at which reliable wireless underground communication can be achieved using radio signal propagation through the soil. To overcome this challenge, the purpose of this paper is to investigate a new approach for wireless underground communication using acoustic signal propagation along a buried water pipe.

An acoustic communication system was developed based on the requirements of low cost (tens of pounds at most), low power supply capacity (in the order of 1 W-h) and miniature (centimetre scale) size for a wireless communication node. The developed system was further tested along a buried steel pipe in poorly graded SAND and a buried medium density polyethylene (MDPE) pipe in well graded SAND.

With predicted acoustic attenuation of 1.3 dB/m and 2.1 dB/m along the buried steel and MDPE pipes, respectively, reliable acoustic communication is possible up to 17 m for the buried steel pipe and 11 m for the buried MDPE pipe.

Although an important first step, more research is needed to validate the acoustic communication system along a wider water distribution pipe network.

This paper shows the possibility of achieving reliable wireless underground communication along a buried water pipe (especially non-metallic material ones) using low-frequency acoustic propagation along the pipe wall.

This paper aims to study the design and characterization of a 3D printed tetrakaidecahedron cell-based acoustic metamaterial. At present, the mitigation of low-frequency noise involves the utilization of spatially demanding materials for the absorption of sound. These materials lack the ability for targeted frequency control adjustments. Hence, there is a requirement for an approach that can effectively manage low-frequency noise using lightweight and durable materials.

The CAD model was created in SolidWorks and was manufactured using the Digital Light Processing (DLP) 3D printing technique. Experimental study and numerical simulations examined the metamaterial’s acoustic absorption. An impedance tube with two microphones was used to determine the absorption coefficient of the metamaterial. The simulations were run in a thermoviscous module.

The testing of acoustic samples highlighted the effects of geometric parameters on acoustic performance. Increment of the strut length by 0.4 mm led to a shift in response to a lower frequency by 500 Hz. Peak absorption rose from 0.461 to 0.690 as the strut diameter was increased from 0.6 to 1.0 mm. Increasing the number of cells from 8 to 20 increased the absorption coefficient and lowered the response frequency.

DLP 3D printing technique was used to successfully manufacture tetrakaidecahedron-based acoustic metamaterial samples. A novel study on the effects of geometric parameters of tetrakaidecahedron cell-based acoustic metamaterial on the acoustic absorption coefficient was conducted, which seemed to be missing in the literature.

This paper aims to investigate the diners’ preference and perception on six acoustic classifications in eatery places during their casual dining. These classifications’ relationship with diners’ experience and significant impacts on diners’ preferences and perceptions during casual dining will be analyzed.

The data was collected quantitatively with randomly distributed self-administrated questionnaires during the restaurants' operating hours; 449 respondents who dined in at two casual dining restaurants in Melaka city area participated.

Analysis of Variance (ANOVA) tests revealed that the majority of the diners were not adversely affected by the noise level, and they did not have difficulties with their conversations. The results also indicated that the respondents felt that the noise did not stop them from returning to the restaurants. This study's findings may lay the groundwork for future studies to provide the acoustic comfort classification in eatery places, which can also be integrated and synthesized to be used as a reference for acoustic design and practice.

The number of participants used simple random sampling method. Therefore, the sample cannot be typical for the target population, and there is a limited possibility of generalizing the present findings. The data collection was only gathered from two eatery places with similar typologies at the similar demographic background of customers because it was collected at Melaka city. Thus, the impacts of customers may differ at other typologies and locate in different regions, and the physical environment and the quality offered are also different in other places. The measured determinant factors only focus on the diners’ characteristics; thus, future research should be done to investigate other determinant factors impacting the preference and perceived acoustical comfort in eatery places.

The findings in this study would provide a basis reference to assess and evaluate the acoustic classification in eatery places that suits the customers’ perceived satisfaction.

This study identified that demographic characteristic, gender and age are not the prominent determinant factors influencing the diners’ preference and perceived acoustical comfort in eatery places. Moreover, the days and dining hours were also found to be the determinants that will influence the preferences.

This paper has developed determining factors on acoustics classification that can be applied upon designing eatery places as well as a fundamental approach in developing rating for acoustics comfort index as reference for the diners to choose where to dine based on their preference and activities.

The general attitude of the ancient theatre conservation strategies and policies is still concerned primarily with their architectural physical appearance without considering their authentic scientific acoustical qualities. The paper attempts to illustrate and discuss how to enhance their acoustic heritage to arouse the audience's interest and needs. Thus, supporting their reconstruction based on recent acoustical research and community needs-related concerns and opportunities for ancient theatre's modern use.

It is based on reviewing the main issues related to reconstruction in the international charters and conventions and how to infuse ancient theatres with their full role. It discusses the dilemma and debates regarding the theatre stage wall, colonnade (portico) restoration and anastylosis. Is it sufficient enough to recover the theatre sound volume? Or to rethink for full physical reconstructions of these missing related acoustical theatre architectural elements to their original level and layout as in ancient times in parallel to their virtual reconstruction?

The cultural significance of the authentic theatre's acoustical qualities needs to reform the conservation strategies and policies for a more flexible and resilient approach. It should be postulated, re-examined and advocated parallel to their 3D virtual reconstruction in the related international charters and conventions.

The paper's implications are not immediate; it is far-reaching. It suggests the importance of acoustics in analysing historic theatre performance venues and reforming conservation strategies and approaches. This issue is especially critical for architects, conservators, the heritage community and the public audience.

Recommendations are made for potential bold reconstruction actions that may be taken to achieve further sustainability, comfort, and permeability in modern theatre-use performances. Their physical reconstruction for improving the performance of contemporary theatre use regarding retaining the acoustic cultural significance should be more flexible and resilient in the charters.