Search results

Using the stimulus–organism–response (SOR) theoretical model, this empirical research aims to examine and validate how tourists’ interactions with 360-degree virtual reality (VR) videos incorporating Web navigability and visual interface design quality (stimulus) on travel websites can make tourists more engaged and then satisfied (organism), which could make them more likely to visit destinations and spread electronic word of mouth (e-WOM) (response).

Using the convenience sampling method, 975 responses were collected through a questionnaire. The data were analysed using Smart-PLS 4 software to investigate the hypothesised relationships.

The findings demonstrate that 360-degree VR videos significantly create Web user engagement, and Web user engagement is significantly associated with Web user satisfaction. The result shows that Web user engagement and satisfaction impact the intention to visit the tourist destination. Additionally, Web user satisfaction impacts e-WOM. Lastly, navigability and visual interface design quality are significantly moderated between 360-degree VR videos and Web user engagement.

This research only examined the tourists’ behavioural intentions with 360-degree VR videos during the pre-travel phase. In contrast, future research may investigate how tourists behave with VR during the on-site and post-travel phases.

Tourism marketers should not only adopt 360-degree VR but also integrate Web navigability and visual interface design to boost Web users’ engagement on tourism websites.

This study advances the study of VR from the tourists’ psychological perspective. Moreover, the SOR theory has been re-examined from the VR and technology tourism perspectives. It provides a general understanding of the behavioural aspects of tourists in developing countries.

利用刺激-有机体反应（SOR）理论模型, 本实证研究检验并验证了游客与旅游网站上结合了网络导航性和视觉界面设计质量（刺激）的360度虚拟现实(VR)视频的互动如何使游客更投入、更满意（有机体）, 这可能使他们更有可能访问目的地并传播电子口碑（响应）。

采用方便抽样法, 通过问卷调查收集了975份回复。使用Smart-PLS 4软件对数据进行分析, 以调查假设的关系。

研究结果表明, 360度虚拟现实(VR)视频显著提高了网络用户参与度, 网络用户参与与网络用户满意度显著相关。结果表明, 网络用户参与度和满意度对旅游目的地的访问意愿有影响。此外, 网络用户满意度也会影响电子口碑。最后, 在360度虚拟现实(VR)视频和网络用户参与度之间, 导航性和视觉界面设计质量显著适中。

这项研究只考察了游客在旅行前阶段使用360度虚拟现实(VR)视频的行为意图。相比之下, 未来的研究可能会调查游客在现场和旅行后阶段使用虚拟现实(VR)的行为。

旅游营销人员不仅应采用360度虚拟现实(VR), 还应将网络导航性和视觉界面设计相结合, 以提高网络用户对旅游网站的参与度。

本研究从游客的心理角度推进了虚拟现实(VR) 的研究。此外, 还从虚拟现实(VR)和科技旅游的角度重新审视了SOR 理论。它提供了对发展中国家游客行为方面的一般了解。

Utilizando el modelo teórico estímulo-organismo-respuesta (SOR), esta investigación empírica examinó y validó cómo las interacciones de los turistas con los vídeos de RV de 360 grados que incorporan la navegabilidad web y la calidad del diseño de la interfaz visual (estímulo) en los sitios web de viajes pueden hacer que los turistas se sientan más comprometidos y luego satisfechos (organismo), lo que podría hacerles más propensos a visitar los destinos y a difundir el e-WOM (respuesta).

Utilizando el método de muestreo por conveniencia, se recogieron 975 respuestas a través de un cuestionario. Los datos se analizaron mediante el software Smart-PLS 4 para investigar las relaciones hipotetizadas.

Los resultados demuestran que los vídeos de RV de 360 grados generan un compromiso significativo de los usuarios de la web y que el compromiso de los usuarios de la web se asocia significativamente con su satisfacción. El resultado muestra que el compromiso y la satisfacción del usuario web repercuten en la intención de visitar el destino turístico. Además, la satisfacción del usuario web influye en el e-WOM. Por último, la navegabilidad y la calidad del diseño de la interfaz visual son significativamente moderadas entre los vídeos de RV de 360 grados y el compromiso del usuario web.

Esta investigación sólo examinó las intenciones de comportamiento de los turistas con los vídeos de RV de 360 grados durante la fase previa al viaje. En cambio, en futuras investigaciones se podría estudiar cómo se comportan los turistas con la RV durante las fases in situ y posterior al viaje.

Los profesionales del marketing turístico no sólo deberían adoptar la RV de 360 grados, sino también integrar la navegabilidad web y el diseño de la interfaz visual para potenciar el compromiso de los internautas en los sitios web turísticos.

Este estudio avanza en el estudio de la RV desde la perspectiva psicológica del turista. Además, se ha reexaminado la teoría S-O-R desde las perspectivas de la RV y el turismo tecnológico. Proporciona una comprensión general del aspecto conductual de los turistas en los países en desarrollo.

The purpose of the present study is to identify the active and dead links of uniform resource locators (URLs) associated with web references and to compare the effectiveness of Chrome, Google and WayBack Machine in retrieving the dead URLs.

The web references of the Library Hi Tech from 2004 to 2008 were selected for analysis to fulfill the set objectives. The URLs were extracted from the articles to verify their accessibility in terms of persistence and decay. The URLs were then executed directly in the internet browser (Chrome), search engine (Google) and Internet Archive (WayBack Machine). The collected data were recorded in an excel file and presented in tables/diagrams for further analysis.

From the total of 1,083 web references, a maximum number was retrieved by the WayBack Machine (786; 72.6 per cent) followed by Google (501; 46.3 per cent) and the lowest by Chrome (402; 37.1 per cent). The study concludes that the WayBack Machine is more efficient, retrieves a maximum number of missing web citations and fulfills the mission of preservation of web sources to a larger extent.

A good number of studies have been conducted to analyze the persistence and decay of web-references; however, the present study is unique as it compared the dead URL retrieval effectiveness of internet explorer (Chrome), search engine giant (Google) and WayBack Machine of the Internet Archive.

The web references of a single journal, namely, Library Hi Tech, were analyzed for 5 years only. A major study across disciplines and sources may yield better results.

URL decay is becoming a major problem in the preservation and citation of web resources. The study has some healthy recommendations for authors, editors, publishers, librarians and web designers to improve the persistence of web references.

It is generally known that the perforated section such as the castellated section is good to sustain distributed loads but inadequate to sustain highly concentrated loads. Therefore, it is possible to design the opening in a different arrangement of web opening to achieve section efficiency, thus improving the strength and torsional behaviour of the section with web opening. This study aims to focus on the finite element analysis of I-beam with and without openings in steel section dominated to lateral-torsional buckling behaviour.

In this work, the analysis of different sizes, shapes and arrangements of web opening is performed by using LUSAS application to conduct numerical analysis on lateral-torsional buckling behaviour. This involves three diameter sizes of web opening, five types of opening shapes and two criteria of the model.

The section with c-hexagon web opening was placed about 200-mm centre to centre and 100-mm edge distance, contribute to 7.26% increase of buckling capacity. For the section with 150-mm centre to centre and 50-mm edge distance, the occurrence of local buckling contributes to decrease of lateral buckling section capacity to 19.943 kNm, where pure lateral-torsional buckling mostly occurred because of prevented section. Besides that, the web opening diameter was also analysed. The web crippling was observed because of the increase of opening diameter from 0.67 to 0.80 D.

This contributes to a decrease in buckling capacity as figured in the contour of the deformed shape. For Model 1, an increase of buckling capacity (31.46%) is observed when the opening diameter are changed from 0.67 to 0.80 D.

Acknowledging previous scholarly focus on functional attributes in understanding technology acceptance behaviour, the current study aims to offer a novel perspective by integrating eight different dimensions of utilitarian and hedonic attributes to examine their influence in delivering a holistic web-based retail shopping experience.

The research model was tested and validated through data collected from 370 online shoppers across both hedonic and utilitarian product ranges. Hypotheses were tested using covariance-based structural equation modelling with multi-group analysis to examine the moderation effect.

The findings strongly support the model confirming eight new utilitarian and hedonic dimensions that influence web-based retail shopping behaviour. The findings also confirm that hedonic attributes remain important even for utilitarian product purchasing.

The key managerial implication is the demonstrated need to balance utilitarian and hedonic attributes in web-based retail platforms, where previously, there has been an overemphasis on functional features. Web-based retailers should consider the optimal blend of utilitarian (e.g. information quality) and hedonic (e.g. aesthetic) attributes in the design of a retail shopping site, irrespective of the product category.

This study integrates multiple dimensions of utilitarian and hedonic attributes into a single model and highlights the interplay of these attributes, thus extending the technology acceptance model. This paper also advances scholarship through its identification of attribute impact across different product categories.

Municipalities, as the front lines of service delivery, use websites as one of the tools to communicate information to the public. While it is considered a record, many organisations, including municipalities, do not manage websites as such. This study aims to explore the archiving of websites as records in the municipalities of KwaZulu-Natal (KZN) Province in South Africa by using the web archiving life cycle model.

This study used a mixed-methods research with an explanatory design, with quantitative data collected first through content analysis of websites and qualitative data collected through interviews. Researchers used multilevel sampling, first quantitatively analysing all available websites of the municipalities (52) in KZN, and then qualitatively selecting only records managers, information managers, web administrators, communication managers and website managers or designers from municipalities because of their understanding and involvement with websites in some way.

This study established that some records on municipal websites are often in paper format in record-keeping systems, whereas others are born digital and are not captured in the systems. Municipalities lack a dedicated web online harvesting tool as well as an archiving policy or strategy to guide website archiving. Furthermore, municipalities placed a high reliance on service providers to keep their websites operational.

It became clear during the interviews that most of the participants were unfamiliar with web archiving. As a result, only 12 of the 56 selected participants from the municipalities provided the required information in relation to the current study as others could not provide answers. Data for other participants were not analysed.

Due to a lack of infrastructure for ingesting digital records into archival custody, a framework for harvesting web content of value is proposed both internally in municipalities and externally to an archive repository.

The purpose of this study is to examine research on academic libraries and the social web published from July 1, 2019, to June 30, 2023.

The article search and filtering procedures mirrored those of Choi and Harper (2020) and Carlsson (2015), resulting in a total sample size of 93 articles. These articles underwent examination based on the same eight variables (i.e. journal outlet, research theme, publication year, social web type, method, keyword, study participant type and study country) as employed by Choi and Harper (2020) and Carlsson (2015), with the addition of two new variables (i.e. research purpose and the impact of COVID-19).

The research article volume has consistently maintained a stable trend. A notable difference from Choi and Harper (2020) and Carlsson (2015) is the rise of “user perspectives” as the second most prevalent theme. Unlike Choi and Harper (2020), the “survey” method is predominant. Many research purposes, excluding “marketing and promotion,” lack attention. Additionally, there’s a dearth of studies on the impact of COVID-19.

The findings from the study not only offer a snapshot of the current research landscape on academic libraries and their engagement with the social web but also offer insights for future scholarly endeavors.

There is a limited effort in exploring the recent literature regarding the role of the social web in academic libraries. This study serves as a valuable guide for contributing to this dynamic research stream and provides various up-to-date implications.

Rural tourism facilities in Poland were very keen on amateur websites to promote their hospitality services from 2000 to 2018. In most cases, the websites were nonprofessional, hosted on free servers and made by family members or friends of the holding. After search engine algorithms changed in 2015–2019, the websites started to go extinct on a large scale; they were deleted and often replaced with a more modern design and a commercial domain. These resources offered a rare opportunity to gain insight into rural tourism, rural changes and socioeconomic and cultural phenomena.

The paper’s objective is to demonstrate with an analysis of archived Polish rural tourism websites that digital cultural artefacts are generated in rural areas. The study was an analysis of selected development attributes of rural tourism websites found in the Internet Archive. The analysis involved those attributes that are important for determining whether a website or content can be considered digital cultural heritage assets.

The conclusions demonstrate that rural digital cultural heritage is a set of digital artefacts created in rural areas with their characteristics. Rural digital artefacts are records of ICT, infrastructure, environmental, cultural and socioeconomic changes.

The “digital assets” of rural areas are yet to be discussed in the context of rural cultural heritage, as a set of artefacts created in these areas and characteristic of them.

The primary objective of this paper is to show a systematic and methodological approach for the digitalization of critical clinical pathways (CPs) within the healthcare domain.

The methodology entails the integration of service design (SD) and action research (AR) methodologies, characterized by iterative phases that systematically alternate between action and reflective processes, fostering cycles of change and learning. Within this framework, stakeholders are engaged through semi-structured interviews, while the existing and envisioned processes are delineated and represented using BPMN 2.0. These methodological steps emphasize the development of an autonomous, patient-centric web application alongside the implementation of an adaptable and patient-oriented scheduling system. Also, business processes simulation is employed to measure key performance indicators of processes and test for potential improvements. This method is implemented in the context of the CP addressing transient loss of consciousness (TLOC), within a publicly funded hospital setting.

The methodology integrating SD and AR enables the detection of pivotal bottlenecks within diagnostic CPs and proposes optimal corrective measures to ensure uninterrupted patient care, all the while advancing the digitalization of diagnostic CP management. This study contributes to theoretical discussions by emphasizing the criticality of process optimization, the transformative potential of digitalization in healthcare and the paramount importance of user-centric design principles, and offers valuable insights into healthcare management implications.

The study’s relevance lies in its ability to enhance healthcare practices without necessitating disruptive and resource-intensive process overhauls. This pragmatic approach aligns with the imperative for healthcare organizations to improve their operations efficiently and cost-effectively, making the study’s findings relevant.

Cold-formed steel has been used extensively as secondary elements such as purlins and girts in building frames. Purlin is critical to the structure of the roof because it supports the weight of the roof deck and aids to make the entire roof structure more rigid. Furthermore, cold-formed steel purlin is a replacement for wood purlin because steel purlins are light weight and more economical. Hence, the purpose of this study to investigate the effect of opening due to torsion behaviour.

This analysis used cold-formed steel hat purlin with and without openings (WOs) under different opening shape, location and spacing by using finite element LUSAS software.

The finite element results showed that purlin with openings had higher angle of rotation than section WO, with a percentage difference of not more than 6%. When the opening was located at mid-span, the angle of rotation reduced. Angle of rotation increased when the opening spacing increased. Number of openings also affected the torsional behaviour of the purlin. Five opening shapes, which were circle, diamond, C-hexagon, square and elongated circle, were studied. Among all the shapes, purlin with diamond opening was more resistance to torsion.

The use of cold-formed steel section with web openings (rectangular or circular) is a practical solution when it is required to pass service ducts through the structural member. However, the presence of opening gives minor effect on the structural behaviour of cold-formed steel hat purlin.

This paper proposes an Information and Communication Technology (ICT) platform to increase the sustainability and resilience of smallholders to face supply chain disruptions in the event of COVID-like crises. The platform facilitates interactions between smallholders and buyers, workers and freight transport companies in agri-food ecosystems. Furthermore, this research work presents the implementation of the freight transport companies’ platform module.

The research work begins with a literature review aiming at analyzing current available ICT solutions supporting smallholders and other actors in the agri-food supply chain. This analysis identifies the research gaps which have to be filled by the platform. Then, the authors proceed with the analysis of the operational scenarios of each platform actor by interacting with experts and operators working in the agri-food sector. The results of such analysis resulted in a comprehensive, unambiguous and consistent set of specification being used to define the platform structure and modules architecture. The platform modules have been developed by using the web-application framework Laravel.

Preliminary tests show that the proposed platform is usable and promises to improve the resilience and economic, social and environmental sustainability of agri-food supply chains, with a focus on smallholders.

The research work allows players in the agri-food supply chain and in particular small local producers to react and mitigate the impact of COVID-like crises through development of a platform in which smallholders, citizens (buyers and workers) and freight transport companies are simultaneously present.