Search results

Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.

A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.

Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.

The study was conducted using limited number of volunteers for the wearer trials.

By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.

To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

Purpose: This chapter aims to enlighten the stakeholders on the role and contribution and the issues and challenges of large-scale industries in the wake of the globally unified economies.

Need for the study: Large-scale industries are one of the pillars of any nation and can exercise an immense impact on the numerous facets of the economy of any country. Their role and contribution can benefit all the stakeholders, especially in today’s integrated and interdependent world economies. Hence, there is an absolute need to highlight the issues and challenges and suggest measures to overcome them to promote a resilient global economy.

Methodology: The study gathered data from secondary sources like textbooks, articles, and the internet.

Findings: The findings of the study state that large-scale industries are enormous contributors to employment creation, development of the economy, growth of revenue, research and development (R&D) and innovation, export promotion, and infrastructure. The significant challenges include regulatory compliance, workforce management, economic volatility, political instability, supply chain management, environmental compliance, and technology and infrastructure.

Protectionism, deregulation, public–private partnership, privatisation, and environmental regulation are significant government decisions that affect large-scale industries. The study identifies tax incentives, easy access to financing, and domestic and international trade policies to safeguard large-scale industries’ interests.

Practical implications: Large-scale industries contribute towards the growth of global economic resilience in terms of employment generation, technological advancements, and innovation, fostering international trade in today’s interconnected world.

Industry 4.0 has an inimitable potential to create competitive advantages for the apparel industry by enhancing productivity, production, profitability, efficiency and effectiveness. This study, thus, aims to assess the digitalisation level of the Tanzanian apparel industry through the Industry 4.0 perspectives.

A mixed-methods-based approach was deployed. This study deployed semi-structured interviews, document review and observation methods for the qualitative approach. For the quantitative approach, closed-ended questionnaires were used to ascertain the digitalisation levels and maturity level of the textiles and apparel (T&A) factories and small and medium-sized textile enterprises in Tanzania. The sample size was 110, with participants engaged through the purposive sampling technique.

Industry 4.0 frameworks evolved into practices mainly since 2011 in several service and manufacturing industries globally. For Tanzania, the findings indicate that the overall maturity level of the T&A industries is 2.5 out of 5.0, demonstrating a medium level of adoption. Thus, the apparel industries are not operating under the industry 4.0 framework; they are operating within the third industrial revolution – Industry 3.0 – framework. For such industries to operate within the fourth industrial revolution – Industry 4.0 – that is only possible if there is significantly well-developed industrial infrastructure, availability of engineering talent, stable commercial partnerships, demand from the marketplace and transactional relationship with customers.

This study’s limitations include: firstly, Industry 4.0 is an emerging area; this resulted in limited theoretical underpinnings in the Tanzanian perspectives. Secondly, the studied industries may not suffice the need to generalise the findings for the entire country, thus needing another study.

Although Industry 4.0 conceptual frameworks have been on trial in several industries since 2011, this is amongst the first empirical research on Industry 4.0 in the Tanzanian apparel industry that assesses the digitalisation levels.

This study aims to examine the illicit capital movement through trade misinvoicing in Burundi, at disaggregated levels by major trading partners and by major export and import commodities.

Trade misinvoicing is estimated by comparing the trade values declared by Burundi with those declared by trading partners in a bilateral international transaction, after adjusting for the cost of freight and insurance. Disaggregated trade misinvoicing by major trading partners is computed using the Direction of Trade Statistics database of the International Monetary Fund over the period 1970–2019. Disaggregated trade misinvoicing by major trading commodities is computed using the UN-COMTRADE database over the period 1993–2019.

Exports of Burundi to most of its major trading partners are found to be underinvoiced. The top destinations for export underinvoicing are United Arab Emirates, Belgium and Germany. However, exports to UK and Switzerland are found to be overinvoiced. The major export commodities considered, coffee and gold, are found to be affected by trade misinvoicing to a great extent. On the import side, the estimation results indicate that imports of Burundi from its major trading partners are in general overinvoiced. High import overinvoicing is observed in the trade with Saudi Arabia, China and Japan. At commodity level, for the top 6 commodities considered, imports were to a great extent found to be overinvoiced. Cases of illicit capital outflows and inflows through trade misinvoicing are highlighted.

Some policy implications are drawn from this study. First, in collaboration with its development partners, the Government of Burundi should put in place measures to reduce the trade misinvoicing phenomenon, which undermines poverty reduction efforts. The study has shown which trade partners are involved and which commodities are mostly affected. Policy efforts could then be focused in that regard. Investigations at the company and transaction levels can be made to identify the mechanisms of trade misinvoicing. Second, more effort is needed in ensuring systematic and transparent reporting of international trade transactions. To fight trade misinvoicing, transparency in international trade is key, through coordinated enforcement of reporting rules.

Previous studies analyzed the problem of trade misinvoicing at an aggregated level. However, this leaves out essential information on trading partners involved in the phenomenon as well as trading commodities affected. This study investigates trade misinvoicing at disaggregated levels, at product level and by trading partner.

Regional comprehensive economic partnership (RCEP) is understood as the world's largest trading bloc given its contribution to the world output (30%). The mega trade bloc brings together 15 countries of East Asia, Southeast Asia and Oceania to eliminate tariff and non-tariff barriers in goods and services trade. The study suggests the importance of sector specific reforms for Malaysia to strengthen domestic capability.

The analytical framework constructs upon the partial equilibrium analysis and uses WITS SMART simulations.

The study finds that Malaysia's elimination of tariffs under the RCEP will cause a surge in imports from developed member countries of RCEP like Australia, South Korea and Japan. The study also finds a trade diversion in countries such as India. The empirical results establishes that RCEP would further strengthen intra-ASEAN trade.

The study explores select sectors of the manufacturing industry in Malaysia.

The implementation of RCEP would impact the manufacturing sector immensely, especially in sectors like electrical machinery and equipment and inorganic chemicals, which are two of the major trading commodities of the Malaysian economy.

Any trade agreement has a larger impact on the society. It may raise income, boost the consumer preferences and create or erode consumer welfare. The study reports the consumer welfare effect of the implementation of RCEP in Malaysia.

The study is the first attempt to do a partial equilibrium analysis for the electrical machinery and equipment sector and inorganic chemicals sector of Malaysia using both aggregated and disaggregated data at HS two-digit and HS six-digit level.

3D printing has been warmly welcomed by clothing enterprises for its customization capacity in recent years. However, such clothing enterprises have to face the digital transformation challenges brought by 3D printing. Since the business model is a competitive weapon for modern enterprises, there is a research gap between business model innovation and digital transformation challenges for 3D-printing garment enterprises. The aim of the paper is to innovate a new business model for 3D-printing garment enterprises in digital transformation.

A business model innovation canvas (BMIC), a new method for business model innovation, is used to innovate a new 3D-printing clothing enterprises business model in the context of digital transformation. The business model canvas (BMC) method is adopted to illustrate the new business model. The business model ecosystem is used to design the operating architecture and mechanism of the new business model.

First, 3D-printing clothing enterprises are facing digital transformation, and they urgently need to innovate new business models. Second, mass customization and distributed manufacturing are important ways of solving the business model problems faced by 3D-printing clothing enterprises in the process of digital transformation. Third, BMIC has proven to be an effective tool for business model innovation.

The new mass deep customization-distributed manufacturing (MDC-DM) business model is universal. As such, it can provide an important theoretical reference for other scholars to study similar problems. The digital transformation background is taken into account in the process of business model innovation. Therefore, this is the first hybrid research that has been focused on 3D printing, garment enterprises, digital transformation and business model innovation. On the other hand, business model innovation is a type of exploratory research, which means that the MDC-DM business model’s application effect cannot be immediately observed and requires further verification in the future.

The new business model MDC-DM is not only applicable to 3D-printing garment enterprises but also to some other enterprises that are either using or will use 3D printing to enhance their core competitiveness.

A new business model, MDC-DM, is created through BMIC, which allows 3D-printing garment enterprises to meet the challenges of digital transformation. In addition, the original canvas of the MDC-DM business model is designed using BMC. Moreover, the ecosystem of the MDC-DM business model is constructed, and its operation mechanisms are comprehensively designed.

This study aims to convey the understanding of the ecosystem – how “hundi” works on the border trade between Myanmar and northern Thailand, which is an informal transfer system and is widely used as an alternative banking system. Even though the role of hundi is unable to declare the sources of money under the standard settlement of formal banking system, a failure to operate of its official mechanism are carrying using hundi, as a financial platform across the border between Thailand and Myanmar. This study surveys the best practice mechanism for the regional and international cooperation.

This paper draws on relevant literature, open-source reporting, and interviews with more than 30 interviewees on the border between Thailand and Myanmar. Interviewees includes border-trader, money changer, money transfer operators, business leaders, hundi operators, immigrant labors, government officials and commercial banking staffs.

This study provides a unique insight of hundi system, which work as the alternative mode of formal banking. It is an informal fund transfer payment platform used on the border between Thailand and Myanmar in the past five decades. It insists that hundi plays a significant role in both substitution and complementary on the trade and payment across the border of Myanmar–Thailand. Even though confronting with the barriers of financing of terrorism (anti money laundering AML/combating the financing of terrorism CFT) risk, the competition with the expanding and modernizing formal banking sector, and the introduction of Fintech and mobile money services. In the short term, these are unlikely to eliminate the hundi system completely, but may instead push hundi operators towards adopting these networks and technologies in their own operations.

This paper will be a useful source for academics, development professionals, policymakers, law enforcement agencies and business actors who are seeking to understand Myanmar’s informal payment system, hundi.

This is the latest work for border trade payment or trade financing role of hundi which has hidden under the informal market of the border for several decades. It has few research of hundi on border trade and payment, particularly after the military coup in 2021 which made hundi return to be on the spotlight and simultaneous mechanism of border trade and payment ecosystem of Myanmar. This paper will be a useful source for academics, development professionals, policymakers, law enforcement agencies and business actors who are eager to understand Myanmar’s informal payment system, hundi, especially during the hardship.

Technological innovation has become a significant part of textile and apparel industries. To become distinguished from competitors, it is essential to harness the potentials of the organizations in achieving higher speeds, faster delivery times, more precise research and development processes followed by modern manufacturing techniques, lower inventory and lower costs. This paper aims to present the risk factors, root causes and their impact related to technological innovation. This uncovers deeper problems inherent to the technological innovation process while providing insight to develop a more robust risk management strategy in marking the survival and growth of the organizations in the textile and apparel trade.

Literature review and structured interviews with industry experts were conducted to identify the risk factors and root causes associated with technological innovations related to textile and apparel industries. The impact of root causes to the risk factors was determined through priorities, derived according to analytic network process using Super Decision software.

Impact of the root causes on risk factors take different priorities, highlighting the most alarming root causes, which contribute more to the outcome. This provides insight for a more precise decision-making on the order of prioritization of root causes in managing risks involved.

Findings of this research provide insight on the most influential competencies of any textile and apparel organization for a thriving innovation. Profound knowledge on risk factors, root causes and their contribution to the outcome enhances complex decision-making. This ultimately leads to “credible performances’’ of the technological innovation and optimizing the resources available, which bridges the gap that exists in the current literature.

Recognizing novel entrepreneurial opportunities arising from a crisis is of paramount importance for firms. Hence, understanding the pivotal factors that facilitate firms in this endeavor holds significant value. This study delves into such factors within a representative empirical context impacted by a crisis, drawing insights from existing literature on opportunity recognition during such tumultuous periods.

The authors conducted a qualitative inspection of 14 Italian firms during the COVID-19 pandemic crisis. The authors collected a rich body of multi-source qualitative data, including 34 interviews (with senior managers and entrepreneurs) and secondary data (press releases, videos, web interviews, newspapers, reports and academic articles) in two phases (March–August 2020 and September–December 2020).

The results suggest the existence of a process model of opportunity recognition during crises based on five entrepreneurial influencing factors (entrepreneurial knowledge, entrepreneurial alertness, entrepreneurial proclivity, entrepreneurial personality and entrepreneurial purpose).

Various scholars have highlighted that, in times of crises, it is not easy and indeed very challenging for entrepreneurs to identify novel entrepreneurial opportunities. However, recent research has shown that crises can also positively impact entrepreneurs and their capacity to identify new entrepreneurial opportunities. Given these findings, not much research has analyzed the process by which entrepreneurs identify novel entrepreneurial opportunities during crises. This study shows that some entrepreneurial influencing factors are very important to identify new entrepreneurial opportunities during crises.