Search results

The purpose of this paper is to introduce a tetrahedral mobile robot with only revolute joints (TMRR). By using rotation actuators, the mechanism of the robot gains favorable working space and eliminates the engineering difficulties caused by the multilevel extension compared with liner actuators. Furthermore, the rolling locomotion is improved to reduce displacement error based on dynamics analysis.

The main body of deforming mechanism with a tetrahedral exterior shape is composed of four vertexes and six RRR chains. The mobile robot can achieve the rolling locomotion and reach any position on the ground by orderly driving the rotation actuators. The global kinematics of the mobile modes are analyzed. Dynamics analysis of the robot falling process is carried out during the rolling locomotion, and the rolling locomotion is improved by reducing the collision impulse along with the moving direction.

Based on global kinematics analysis of TMRR, the robot can realize the continuous mobility based on rolling gait planning. The main cause of robot displacement error and the corresponding improvement locomotion are gained through dynamic analysis. The results of the theoretical analysis are verified by experiments on a physical prototype.

The work introduced in this paper is a novel exploration of applying the mechanism with only revolute joints to the field of tetrahedral rolling robots. It is also an attempt to use the improved rolling locomotion making this kind of mobile robot more practical. Meanwhile, the reasonable engineering structure of the robot provides feasibility for load carrying.

The purpose of this paper is to propose an overall deformation rolling mechanism based on double four-link mechanism. The double quadrilateral mobile mechanism (DQMM) has two switchable working modes which can be used to traverse different terrains or climb over obstacles.

The main body of the DQMM is composed of a double four-link mechanism which sharing a public link and two symmetrical steering platforms which placed at both ends of the four-link mechanism. The steering platforms give the DQMM not only steering ability but also reconnaissance ability which can be achieved by carrying sensors such as cameras on steering platforms. By controlling the deformation of the DQMM, it can switch between two working modes (tracked rolling mode and obstacle-climbing mode) to achieve the functions of rolling and obstacle-climbing. Dynamic simulation model was established to verify the feasibility.

Based on the kinematics analysis and simulation results of the DQMM, its moving function is realized by the tracked rolling mode, and the obstacle-climbing mode is used to climb over obstacles in structured terrains such as continuous stairs. The feasibility of the two working modes is verified on a physical prototype.

The work of this paper is a new exploration of applying “overall closed moving linkages mechanism” to the area of small mobile mechanisms. The adaptability of different terrains and the ability of obstacle-climbing are improved by the combination of multi-modes.

The purpose of this paper is to propose a deformable two-wheel-like mobile mechanism based on overconstrained mechanism, with the abilities of fast rolling and obstacle surmounting. The drive torque of the multi-mode motions is generated by self-deformation. Moreover, the analyses of feasibility and locomotivity of two mobile modes are presented.

The main body of the two-wheel-like mobile mechanism is a kind of centrally driven 4 R linkages. The mobile mechanism can achieve the capabilities of fast rolling and obstacle surmounting through integrating two mobile modes (spherical-like rolling mode and polyhedral-like obstacle-surmounting mode) and can switch to the corresponding mode to move or surmount obstacles. The mobility and kinematics of the mobile modes are analyzed.

Based on the results of kinematics analysis and dynamics analysis of the wheel-like mechanism, the spherical-like rolling mode has the capability of fast rolling, and the polyhedral-like obstacle-surmounting mode has the capability of surmounting different obstacle heights by two submodes (quasi-static obstacle-surmounting submode and dynamic obstacle-surmounting submode). The proposed concept is verified by experiments on a physical prototype.

The work presented in this paper is a novel exploration to apply bar linkages in the field of scout. The two-wheel-like mobile mechanism improves the torque imbalance of bar linkages by centrally driven method, removes the rear support structures of the traditional two-wheeled mechanisms by self-deformation and increases the height of obstacle surmounting by mode switching angle.

This paper aims to present a transformation mechanism designed for a miniature throw-able robot, including the mechanical model, related analysis and experiments.

The robot can be thrown into suspicious areas. It keeps in a ball-shaped configuration during throwing and uses the driving motors to implement transformation of the mobile form. A foldable tail is also released out as a third point to guarantee the stability of the robot.

By transformation, the robot possesses the overall shock protection like a regular spherical robot and also has detection ability and agile mobility as a two-wheeled robot.

An innovative transformation mechanism was designed, analyzed and tested. The mechanism is suitable for a throw-able robot which is simple in structure, small in volume and light in weight. Effectiveness of the transformation design has been validated through experiments.

The use of thin sheets with 3D geometries is growing in quantity, due to current progress towards life‐cycle design and sustainable production, and growing in geometrical complexity, due to aesthetic and quality concerns. The growth in manufacturing equipment flexibility has not kept pace with these trends. The purpose of this paper is to propose a new reconfigurable fixture to shorten this gap.

The design implements a novel concept of fixturing. Without interrupting the machining process, a swarm of adaptable mobile agents periodically reposition and reconfigure to support the thin‐sheet workpiece near the tool‐point. The technology has been developed by adopting a multi‐disciplinary, life‐cycle approach. Modularity and eco‐sustainability paradigms have informed the design.

The performance of the physical prototype in an industrial scenario is highly satisfactory. Experiments demonstrate the ability of the system to reconfigure while maintaining machining accuracy in scenarios typical for aircraft part production.

Coordination between the machine‐tool numerical control and the fixture control is not complete and its improvement will make the manufacturing process more robust and autonomous.

The system allows reduction of shop‐floor fixturing inventory. Compared to other reconfigurable fixtures, SwarmItFIX is smarter, more flexible, lighter, and offers shorter reconfiguration times, easier set‐up, and better adaptability to a wider range of workpiece shapes.

This is a breakthrough idea, answering the challenges of hyper‐flexible manufacturing and the proliferation of thin‐sheet use. It is of significant value to mass‐customized industry and of special significance for small‐series production.

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

Soft grippers have safer and more adaptable human–machine and environment–machine interactions than rigid grippers. However, most soft grippers with single gripping postures have a limited gripping range. Therefore, this paper aims to design a soft gripper with variable gripping posture to enhance the gripping adaptability.

This paper proposes a novel soft gripper consisting of a conversion mechanism and four spring-reinforced soft pneumatic actuators (SSPAs) as soft fingers. By adjusting the conversion mechanism, four gripping postures can be achieved to grip objects of different shapes, sizes and weights. Furthermore, a quasi-static model is established to predict the bending deformation of the finger. Finally, the bending angle of the finger is measured to validate the accuracy of the quasi-static model. The gripping force and gripping adaptability are tested to explore the gripping performance of the gripper.

Through experiments, the results have shown that the quasi-static model can accurately predict the deformation of the finger; the gripper has the most significant gripping force under the parallel posture, and the gripping adaptability of the gripper is highly enhanced by converting the four gripping postures.

By increasing the gripping posture, a novel soft gripper with enhanced gripping adaptability is proposed to enlarge the gripping range of the soft gripper with a single posture. Furthermore, a quasi-static model is established to analyze the deformation of SSPA.

Three major markets — “Triad” of Japan, Europe and the United States — are emerging as the most important strategic battlefield for any company operating on a global scale. The author pinpoints four trends — increasing capital intensity, soaring R&D costs, converging worldwide consumer tastes and intensifying protectionism — which together make it imperative for a company to have an inside presence in all three Triad regions. He looks at the steps some companies have already taken toward becoming a Triad power.

The purpose of this paper is to present an automated method for complicated truss structure subassembly identification.

A community-detecting algorithm is introduced and adapted to reach the target. The ratio between oriented bounding boxes of parts is used as the weight to reflect the compact degree of assembly relationships. The authors also propose a method to merge nodes together at cut-vertex in model, by which the solving process could be accelerated.

This method could identify the subassemblies of complex truss structures according to the specific requirements.

This research area is limited to truss structures. This research offers a new method in assembly sequences planning area. It could identify subassemblies in complex truss structures, with which the existing method is not adequate to deal.

This method could facilitate the complex truss structures assembly planning, lower the human errors and reduce the planning time.

The method could inspire general assembly analysis planning.

All authors of this paper confirm that this manuscript is original and has not been submitted or published elsewhere.

The purpose of this paper is to understand the effect of airflow dynamics on vortices for different flow rates using the human nose three-dimensional model.

Olfaction originates with air particles travelling from an external environment to the upper segment of the human nose. This phenomenon is generally understood by using the nasal airflow dynamics, which enhances the olfaction by creating the vortices in the human nose. An anatomical three-dimensional model of the human nasal cavity from computed tomography (CT) scan images using the MIMICS software (Materialise, USA) was developed in this study. Grid independence test was performed through volume flow rate, pressure drop from nostrils and septum and average velocity near the nasal valve region using a four computational mesh model. Computational fluid dynamics (CFD) was used to examine the flow pattern and influence of airflow dynamics on vortices in the nasal cavity. Numerical simulations were conducted for the flow rates of 7.5, 10, 15 and 20 L/min using numerical finite volume methods.

At coronal cross-sections, dissimilar nasal airflow patterns were observed for 7.5, 10, 15 and 20 L/min rate of fluid flow in the human nasal cavity. Vortices that are found at the boundaries with minimum velocity creates deceleration zone in the nose vestibule region, which is accompanied by flow segregation. Maximum vortices were observed in the nasal valve region and the posterior end of the turbinate region, which involves mixing and recirculation and is responsible for enhancing the smelling process.

The proposed analysis is applicable to design the sensor chamber for electronic noses.

In this paper, the influence of airflow dynamics on vortices in the human nasal cavity is discussed through numerical simulations.