Search results

Despite several research efforts tackling construction project risks globally, tertiary education building projects are not devoid of experiencing risks with cascading effects on projects. In the past decades, there has been increasing application of linear assessments of risks in construction risk management practices. However, this study aims to assess the influence of risk factors on the success of tertiary education building projects using a structural equation modelling approach. This study will further reinforce the risk factors that require attention because risk factors are not linear but interdependent.

A quantitative research method was undertaken in this study, where data collection was achieved via a structured questionnaire survey. In total, 452 questionnaires were administered to client representatives, consultants and contractors involved in executing tertiary education building projects across five public tertiary education institutions in Ondo State, Nigeria. Of 452 questionnaires, 279 were found usable for the analysis, implying a response rate of 61.73%. The Cronbach α test, average variances extracted and composite reliabilities values show high reliability and internal consistency of the instrument used for data gathering. Furthermore, the study adopted percentile, mean, correlation, regression analysis and structural equation modelling for analyzing the data collected upon which the study’s inferences were based.

The study found that three out of six criteria for measuring the success of tertiary education building projects were significantly affected by risk factors while using the structural equation modelling technique. With this non-linear method of assessment, completion to time was significantly impacted by environmental risk factors. In addition, safety performance was also significantly influenced by logistic, environmental and legal risk factors; furthermore, logistics, design and environmental risks significantly affected profit. However, completion to cost, standard/quality and end-user satisfaction was not significantly affected by the risk factors in tertiary education building projects.

The quantitative data used for the analysis are limited to the tertiary education building projects from selected five tertiary education institutions in Ondo State; therefore, the results do not indicate all tertiary institutions in Nigeria. In addition, the findings are based on building projects that were procured through a competitive tendering arrangement only and thus considered a limitation for this study.

Not all the risks significantly influence the tertiary education building projects. Therefore, risk factors with a significant effect on the success indicators of tertiary education building projects should be prioritized for a successful project. While risk factors have not affected the completion to cost per se, the study implies that the resultant effect of risks on other success indicators could have a cascading effect on these projects in terms of cost and time overruns. These results may assist during the project risk management while also addressing complexity and uncertainty to avoid chaos in a tertiary education building projects.

The study found significant construction risk factors impacting the success of tertiary education building projects using a non-linear methodology, an extension beyond the usual linear method of assessment of risk impacts on the project performance.

This paper aims to seek accounting graduates' perspectives on the demand for accounting in their workplaces, on the gaps in accounting education (AE), and on the future of the accounting profession, inspired by the new definition of accounting proposed by Carnegie et al. (2021, 2022, 2023a), to adopt a strong focus on sustainable development goals (SDGs) in AE to inculcate tertiary students with the skills that lead them to approach and apply accounting as a multidimensional technical, social and moral (TSM) practice.

The online qualitative survey was distributed to 100 randomly selected New Zealand accounting graduates in order to gather insights from their workplaces. All responses from the 30 graduates who completed the questionnaire underwent qualitative analysis using Leximancer software, which automatically identifies high-level concepts and insights and offers interactive visualizations without bias.

The graduates’ experiences underscore the ongoing significance of technical skills in the New Zealand workplace. They emphasized the lack of non-technical skills training, stressed the necessity of diverse business knowledge and highlighted the importance of automation and digital skills.

The implications for transforming AE involve adopting an activist approach to integrate a TSM perspective into teaching and learning and being open to an interdisciplinary approach to expose tertiary students to the impact of accounting on sustainable development, including collaboration with professional bodies for real-world experiences.

The importance of engaging with SDG-related narratives is stressed to stimulate further discussion, debate and research aimed at identifying practical solutions for AE as a facilitator for SDGs in realizing accounting as a TSM practice.

Course credentialing essentially involves the implementation of digital badges. A number of studies have recently been conducted that clarify this philosophy and promote their adoption in learning programmes. The research presented in this chapter contributes to the body of knowledge on learning and teaching regarding the comparative analyses of learning outcomes, multidimensional credentialing and digital badges relevant to the pedagogy of construction management. The aim of this research was to determine the maturity of multidimensional credentialing within its online pedagogy in particular. A review of literature pertaining to course multi-disciplining, accreditation, credentialing and digital badges had been conducted. Comparative analyses were performed to allocate learning outcomes of the tertiary institution and two accrediting bodies onto each unit in the online delivery mode of a Construction Management Bachelor Degree course. These analyses had yielded three matrices that could assist decision-making on how to assess learning in each unit. The results revealed that almost all units in this course had implemented at least one tertiary institution and accrediting body learning outcome.

This paper aims to conduct a tertiary review to analyse the state of the art of literature reviews on knowledge management (KM) published in academic journals and provide an overview of their evolution. From 2000 to 2022, about 500 reviews have been published in the KM field, with most systematic studies compared to bibliometric or meta-analytic studies, and an absence of previous tertiary studies. Therefore, given the lack of previous tertiary research, this paper provides a complete picture of the evolution of review topics in the past and presents implications for both researchers and practitioners.

A classification scheme was defined to cluster and evaluate the literature reviews, both in terms of methodological approach and content. Regarding the content, the various secondary papers were classified according to the purpose of the research (state of the art, taxonomy, research agenda and research framework), the unit of analysis (small and medium enterprise, large company, start-up and university), the KM models adopted and the thematic areas addressed. Furthermore, a tertiary review methodology was identified integrating two main approaches: a bibliometric approach for cluster identification and a systematic approach for the discussion.

Two categories of contributions emerge from the results: those concerning research topics that have found a continuous interest over time and those that have not yet found a constant research interest. This latter aspect is relevant to help researchers conduct future literature analysis in KM research to bridge existing research gaps.

This paper provides a unique compendium of search directions to offer a comprehensive overview of the scientific debate about KM. This overview can also be used as a managerial panacea to identify best KM practice guidelines from existing reviews.

This is a unique attempt to conduct a tertiary study on KM for more than two decades by providing insights into the structural body of knowledge through academic progress in the subject of KM. Thus, this study expands the field of KM and provides original approaches for research in the field.

Educators play a vital role in supporting tertiary education students’ mental health, as they have frequent interactions with their students. However, information on the strategies and difficulties educators face in this area is scarce, particularly within the multi-ethnic Asian population. Therefore, this study aims to explore Malaysian educators’ roles and challenges in handling students with mental health issues.

Semi-structured interviews were conducted with a sample of 12 educators from tertiary education in Malaysia. All interviews were recorded, transcribed and analysed using thematic analysis.

Four themes were emerged: perceived factors contributing to mental health issues among students, educators’ strategies in supporting students’ mental health, difficulties in supporting students’ mental health and training to support students’ mental health.

To the best of the authors’ knowledge, this is the first study exploring the roles and challenges educators face in supporting tertiary education students’ mental health in Malaysia.

Understanding electricity use behaviour is considered one of the strategies to achieve sustained electricity management in buildings. The lack of understanding of occupants’ electricity use behaviour has been found to cause various environmental and ecological issues. This paper aims to investigate the factors influencing occupants’ inefficient use of electricity in buildings becomes a vital area of study to achieve maximum benefit in the area of electricity management.

The study adopted a quantitative survey and questionnaire as instruments for gathering relevant information from end-users in the study area, and the data collected were analysed using descriptive and inferential statistics.

The major factors influencing the electricity use behaviour of students in the study area were attributed to their level of awareness, personal beliefs and attitude towards electricity, managerial influences and economic factors.

The threats to the environment and ecology necessitate immediate attention to the elements that impact students’ electricity use habits. This research explains the key elements that might impact students’ electricity consumption habits in buildings. Understanding these key characteristics will provide policymakers with vital knowledge of its prevalence.

Despite the huge capital outlay in tertiary education building projects (TEBP), these projects undoubtedly failed in meeting the set objectives of cost, time and quality, among others. Therefore, rather than the impacts of risks on the overall project performance, which is common in the construction management literature, the purpose of this study is to assess the impacts of risk factors on the criteria for measuring the success of public TEBP.

The paper adopted a quantitative research method where the data collection was via a questionnaire survey. The researcher administered 452 questionnaires to the client representatives, consultants and contractors involved in building projects across five public tertiary education institutions in Ondo State, Nigeria. Of 452 questionnaires, 279 were retrieved and suitable for the analysis, translating to a 61.73% response rate. The reliability analysis of the research instrument showed 0.965 and 0.807, via Cronbach’s alpha test, indicating high reliability of the instrument used for data collection.

The study found different risk factors affecting the criteria for measuring the success of TEBP. For instance, the environmental risk factor significantly impacted completion to cost, while financial and political risk factors significantly impacted completion to time. In addition, while environmental, legal and management risks significantly impacted end-user satisfaction, safety performance was significantly impacted by logistic, legal, design, construction, political and management risks. Besides, the logistic, legal, design, construction, financial, political and management risk factors impacted profit. However, despite profit being one of the criteria for measuring the success of building projects, it recorded the highest risk impacts amounting to 41% variance.

The findings are limited to the public tertiary education building projects procured via competitive tendering; therefore, the results might differ when considering other procurement methods.

The practical implication is that rather than focusing on all risk factors, the project stakeholders could give adequate attention to the significant risk factors impacting each of the parameters for measuring the success of education building projects.

The study revealed specific risk factors impacting the criteria for measuring the success of TEBP, which extend beyond the use of the overall project performance approach.

The growing cost and difficulty related to “finding someone” suggests that the role of service organisations in explicitly supporting and designing opportunities for love between customers merits further attention. This study employs a multidisciplinary approach of both services marketing and the economics of mate choice to understand how service organisations can exercise the third place effect and facilitate human mate choice (love) opportunities for consumers in extended service encounters.

Three qualitative co-design workshops were conducted with actors (students, casual and professional staff) from the Australian university ecosystem (n = 36) to identify consumer expectations related to mate selection in third place service contexts. A quantitative online survey of (n = 1207) current Australian university students was used to rank the importance of core and enhancing service elements.

The authors find that love holds a status in the minds of some consumers as an implicitly expected by-product of participation within the core service consumption experience in third places. For service providers to facilitate mate choice opportunities in third places, the results suggest that the design of the connective mechanism(s) should maximise opportunities for informal consumer-to-consumer interaction to allow prospective partners to ascertain compatibility. Further, consumers expect the organisational facilitation of engagement in order to clarify expected etiquette and support goal congruence. In the tertiary education marketplace for love, there is an increased preference for interpersonal engagement by those studying on campus (compared to externally), and a positive relationship between duration of enrolment and increased priority for mate choice service provision.

This research makes a novel theoretical and empirical contribution by being the first exploration of the economics of third place love in the tertiary education sector, also being a research primer for the field of services marketing to consider service design in third places to support mate choice.

The aim of this paper is to outline the collaborative approach used to craft national learning standards for tertiary programs in the field of environment and sustainability in Australia. The field of environment and sustainability is broad and constituted by diverse stakeholders. As such, articulating a common set of learning standards presents challenges.

The authors developed and used a staged collaborative curriculum design methodology to engage more than 250 stakeholders in tertiary environmental education, including discipline scholars, students, professional associations and employers and other environmental educators. The approach was adaptive, to ensure underrepresented stakeholders’ perspectives were welcomed and recognised. The project was commissioned by the Australian Council of Environmental Deans and Directors (ACEDD) and funded by the Federal Government’s Office for Learning and Teaching.

The collaborative approach developed and used for this work facilitated an inclusive process that valued diversity of perspectives, rather than marginalise diversity in favour of a perspective representing a minimum level of agreement. This is reflected in the standards themselves, and is evidenced by participant feedback, piloting of the standards and their subsequent application at multiple universities. Achieving this required careful planning and facilitation, to ensure a democratisation of the stakeholder consultation process, and to build consensus in support of the standards. Endorsement by ACEDD formalised the standards’ status.

Collaborative curriculum design offered the opportunity to foster a shared sense of common purpose amongst diverse environmental education stakeholders. This approach to curriculum design is intensive and generative but uncommon and may be usefully adapted and applied in other contexts. The authors note one subsequent instance where the approach has been further developed and applied in transforming a generalist science program, suggesting the methodology used in this case may be applied across other contexts, albeit with appropriate adjustments: the authors offer it here in the spirit of supporting others in their own complex curriculum design challenges.

This study aims to conduct the aircraft electrical wiring interconnection system (EWIS) safety risk assessment process abundantly and hierarchically and establish the assessment index system considering the weights and interrelationships of different levels of indices.

Due to the failure of EWIS being multifactorial, hidden and diverse, this paper divides the factors influencing the failure of EWIS into 3 primary indices, 13 secondary indices and 38 tertiary indices. Taking open circuit failure (OCF) and short circuit failure (SCF) as examples, calculate the weights of assessment indices based on the triangular fuzzy number analytic hierarchy process (TFNAHP) and triangular fuzzy number decision-making trial and evaluation laboratory (TFNDEMATEL). The cloud model (CM) divides the risk levels and obtains the safety risk assessment results. The comparative analyses of different weight calculation methods, different failure modes and different aircraft EWIS zones verify the effectiveness and practicability of the proposed method.

The results show that the proposed method aligns more with the actual situation than other methods. Also, the results identify key focus objects in EWIS safety risk assessment, such as the surrounding environmental factors among the primary indices having the most significant influence on OCF and SCF, the risk level of SCF being higher than that of OCF, etc.

This paper proposes a safety risk assessment index system for aircraft EWIS based on the cable parameters, surrounding environmental factors, installation and protection methods. The weight assignment is added to the assessment index system, and the safety risk assessment model is constructed by combining TFNAHP, TFNDEMATEL and CM.