Search results

This paper aims to propose and evaluate an innovative approach to education for sustainable consumption (ESC) which empowers teenagers and young adults to improve sustainable consumption competences. This approach combines pedagogical learning approaches such as real-world learning (e.g. experiential learning and research-based learning) with transformative and transdisciplinary research approaches (i.e. real-world laboratory research).

Through a transdisciplinary research design, the authors explore if real-world experiments (RWEs) offer a suitable approach for sustainable consumption education at schools. RWEs are a research approach for knowledge production, aiming to go beyond temporary interventions, to establish semi-permanent spaces for sustainability transformation and reflexive learning. To evaluate this proposal, the authors study already existing active teaching and learning approaches developed within and for ESC and put these in perspective, to define and understand the RWEs.

Insights from a transdisciplinary research project which applied RWEs as a teaching and learning approach in German schools complement conceptual considerations. As a result, advantages, such as the development of core competencies among learners, but also challenges experienced, are illustrated. Though, the challenges found are not unique to the RWE, rather they point out important potentials for ESC through suggesting systematic changes in educational institutions and teaching approaches.

This paper explores RWEs as an active and participatory teaching and learning approach for sustainable consumption education at schools and delivers practical insights and a definition of RWEs as an innovative teaching and learning approach.

Focusing on the quality of teaching and learning, this study aims to explore the perceptions of accountancy students in two emerging UK Higher Education Institutions (HEIs) of the quality of their learning experiences and the impact of these experiences on generic skills development.

A questionnaire survey was used to collect the data. OLS regression was used to test the hypothesis regarding the impact of student learning experiences (lecturer ability, assessment and curriculum) on generic skills development.

Students value the lecturer as the most important determinant of the quality of their experience. They rated their assessment programme very positively, and the curriculum suggests that students tend to experience a deep blended approach to learning. They also felt that they acquired a wide range of soft competency skills such as those associated with research, critical thinking and time management. Multivariate findings indicate that lecturer ability and curriculum contribute significantly and positively to generic skills development.

The study provides a benchmark for international accounting and business educators in any efforts to assess the efficacy of HE delivery since the pandemic. By implication, it enables the identification of enhancements to the previous character of delivery and hence offers the means to direct improvements to the student experience. Such improvements can then be seen in the National Student Survey (NSS) scores, thereby positively contributing to the next Teaching Excellence Framework. Additionally, such tangible enhancements in NSS scores may be advantageous to HEIs, in the UK and other Western countries, in their efforts to recruit international students on whom they place great reliance for increased revenue, to their international business education programmes.

This study addresses the research gap surrounding the link between teaching and learning approaches in accounting and the development of generic skills. Furthermore, acknowledging that the COVID-19 pandemic with its imposed structural change in the HE teaching and learning environment ushered in a new model of curriculum delivery, this study reflects on the pre-COVID-19 scenario and gathers student perceptions of their teaching and learning experiences before the changes necessitated by lockdowns. It therefore brings the opportunity to anchor future research exploring the post-COVID-19 environment and secure comparative analyses.

This study aims to explore first-year engineering students’ perceptions of the engineering librarian as an instructor in multimodal environments related to Information Literacy (IL) topics, teaching strategy, content evaluation, organising, planning and support.

A quantitative approach was used through a survey instrument based on an online questionnaire. Questions were adopted and modified from a lecturer evaluation survey. A simple random sampling technique was used to collect data from first-year cohorts of engineering students in 2020 and 2022.

Respondents perception of the engineering librarian as an instructor in multimodal learning environment was good. Findings revealed students’ learning experiences were aligned with IL instruction even though the environment changed from blended to online. However, an emerging theme that continuously appeared was a lack of access to technology.

These findings may help in developing and strengthening the teaching identity of academic librarians as instructors in multimodal learning environments.

To the best of the author’s knowledge, this study is novel in that it evaluates the teaching abilities of an academic librarian in multimodal environments through the lens of students.

This study aims at measuring the results of the use of an improved and innovative teaching method, specifically designed for supporting the development of students’ entrepreneurship competence, through students’ self-assessment before and after the teaching.

The teaching methods design was based on the effectuation approach and considering the comprehensive entrepreneurship competence model as theoretical grounding. The teaching methods experimentation took place in three countries (Estonia, Italy and Poland), collecting pre–post self-assessment surveys from 404 students of entrepreneurship courses. The results of the experimental groups were compared, in each country, with those of control groups not exposed to the same teaching.

Students participating in classes using innovative teaching methods declared an increase in entrepreneurship competencies, with statistically significant differences, contrasting the results in the control group. The positive changes in self-assessment were observed for 13 of 14 subcompetencies investigated. The increase in the level of the self-assessment of entrepreneurship subcompetencies was significantly greater among bachelor’s degree students.

The strengths of the study include a diverse research sample and a uniform structure of teaching design applied in three different countries, while specific comparative studies on entrepreneurship education and its effect on learners are limited. Moreover, this study used a pre–post design and involved a control group, while most of the existing research on the effect of entrepreneurship teaching are based on different methods. Finally, while most studies measure the impact of entrepreneurship education by focusing on entrepreneurial intentions, this study focused on the development of students’ entrepreneurship competences.

Higher education institutions and their lecturers are strategic agents and main drivers that contribute to circular economy transition. This requires them to understand the key circular economy competencies and how to integrate circular economy holistically into their curricula with the suitable teaching and learning approaches. This study aims to support them by providing an overview on the characteristics of education for the circular economy (ECE) and suggestions to lecturers to further develop their curricula.

The data consisted of scientific articles (n = 22) describing circular economy courses in higher education. Qualitative content analysis with quantitative features was performed on the selected articles to answer the research question.

The findings confirm that the system’s focus is the key issue in ECE. However, to integrate circular economy holistically into the curricula, ECE should be implemented more widely in the context of different industries and market contexts to find innovative teaching and learning approaches. The demand side needs to be incorporated in the courses, as systemic transformation is also about transforming consumption. All levels of implementation and circular economy objectives should be included in courses to promote systems thinking. In addition, innovative forms of real workplace interaction should be increased.

As ECE has started to emerge as a new field of study, this article provides the first integrated overview of the topic.

This study aims to examine the perceptions of students about learning science and physics using the engineering design process (EDP).

The study employed a mixed-methods research design: The quantitative session features a pre–post-test control group study. In the qualitative aspect, the study conducted semistructured interviews for data collection. In the experimental group, the flipped classroom (FC) model and an instructional design are combined to design, develop and implement a physics course using the steps of the EDP, while the conventional method was applied to the control group. The respondents are students of the Department of Mechanical Engineering at Cao Thang Technical College in Vietnam for the academic year 2022–2023. The control and experimental groups are composed of 80 students each. An independent sample Mann–Whitney U test is applied to the quantitative data, while thematic analysis is employed for the qualitative data.

The results demonstrate a statistically significant difference between the experimental and control groups in terms of perceptions about learning science and physics using the EDP, which, when combined with a FC, enhances physics learning for engineering students.

This study implemented the EDP in teaching physics to first-year engineering students in the Department of Mechanical Engineering using the combined FC and instructional design models. The results revealed that a difference exists in the perception of the students in terms of integrating the EDP into learning physics between the experimental and control groups. The experimental group, which underwent the EDP, obtained better results than did the control group, which used the conventional method. The results demonstrated that the EDP encouraged the students to explore and learn new content knowledge by selecting the appropriate solution to the problem. The EDP also helped them integrate new knowledge and engineering skills into mechanical engineering. This research also introduced a new perspective on physics teaching and learning using the EDP for engineering college students.

The research findings are important for teaching and learning physics using EDP in the context of engineering education. Thus, educators can integrate the teaching and learning of physics into the EDP to motivate and engage student learning.

Using the EDP combined with a FC designed under stages of the analyze, design, develop, implement and evaluate (ADDIE) model has enhanced the learning of physics for engineering college students.

Despite the considerable increase in research on entrepreneurship education, few studies examine the role of entrepreneurship educators. Similarly, most frameworks from entrepreneurship education recognize the educator’s importance in facilitating instruction and assessment, but the factors influencing the educator role are not well understood. According to the identity theory, personal factors including self-efficacy, job satisfaction and personal values influence the perspective of self, significance and anticipations that an individual in this role associates with it, determining their planning and actions. The stronger the role identity the more likely entrepreneurship educators will be in effectively developing their entrepreneurial skills as well as the overall learning experience of their students. The objective of this study is to pinpoint the factors that affect entrepreneurial role identity.

Drawing upon the identity theory, this study developed a theoretical framework and carried out an empirical investigation involving a survey of 289 entrepreneurship educators across the globe. Structural equation modeling (SEM) technique was applied to analyze and explore the factors that impact the identity of the educators in their role as entrepreneurship teachers.

The findings show that the role identity of entrepreneurship educators is significantly influenced by their self-efficacy, job satisfaction and personal values. Among these factors, self-efficacy and job satisfaction have the most significant impacts on how educators perceive their role. The implications of these results and directions for future research are also discussed.

The novelty of the current study is derived from its conceptualization of the antecedents of role perception among entrepreneurship educators. This study stands out as one of the earliest attempts to investigate the factors that shape an individual’s scene of self and professional identity as an entrepreneurship educator. The significance of comprehending the antecedents of role perception lies in the insights it can offer into how educators undertake and execute their role, and consequently, their effectiveness in teaching entrepreneurship.

Creating suitable learning conditions in university classrooms continues to be a topical issue in higher education. The above means that a continued search for innovative teaching and learning strategies in universities remains a priority issue. The study therefore investigated conditions that facilitate the effective implementation of cooperative learning (CL) as well as how CL influences the academic performance of students in universities in Zimbabwe.

The research adopted a quantitative research approach located in the descriptive research design. A sample of 341 undergraduate students selected using a simple random sampling strategy from a sample frame of 701 undergraduate students participated in the study. The study first used a pre-test and later, a post-test to determine the initial and end of semester (EOS) academic performance levels of students, respectively, on a Calculus 1 course. A self-constructed structured questionnaire was also used for data collection on the views of students towards the use of CL with particular reference to the 5 dimensions of positive interdependence (PDI), promotive interaction (PI), individual and group accountability (IGA), social and interpersonal skills (SS) and group processing (GP). The questionnaire was validated using confirmatory factor analysis. Structural equation modelling was used to test proposed relationships. A total of 341 questionnaires were administered through an email survey. Of the total, 149 completed questionnaires were received from the students, giving a return rate of 43.7%.

The results showed that positive interdependence, promotive interaction, social and interpersonal skills, individual and group accountability as well as group processing were important antecedents to the effective implementation of CL in universities. The results further showed that CL plays a significant role in improving the academic performance of university students; hence, academic performance was viewed as a significant consequence of CL.

This is the first study on the application of CL to enhance the academic performance of university students in the context of Zimbabwe. As a result, caution should be exercised when generalising the results as more studies to either confirm or disconfirm these results in the context of Zimbabwe may still be required.

These results have implications on policy and practice with regards to active teaching strategies in universities. With regards to practice, the results demonstrated that the use of group activities that allow students to share knowledge and support each other while the teacher plays a facilitating role is important for enhancing students' academic performance. With regards to policy, the results showed that universities can enhance the academic performance of students if policies that promote student-centered teaching and learning approaches to ensure that teaching in universities is more student-led than lecturer-led are developed.

While many studies have been conducted in other contexts, to establish the influence of CL on the academic performance of university students, there is no known study on the influence of CL that has been conducted in the context of Zimbabwean universities. The results of this study therefore are an eye opener on the role of CL in enhancing the academic performance of students in Zimbabwean universities.

Education for sustainable development (ESD) is a developing educational concept that aims to achieve economic, social and environmental sustainability through education. Cultural sustainability education aims to cultivate awareness and protection of cultural assets, promote sustainable development and foster environmental responsibility. This study establishes a cyber-physical metaverse of cultural sustainability learning to cultivate students' motivation, multicultural identity, critical thinking and sustainability thinking.

In this study, virtual reality (VR) and 3D printing technologies were utilized to create a cyber-physical metaverse learning environment. This learning environment is designed to allow elementary school children to learn about indigenous cultures and the architecture of slate houses, as well as socio-architectural issues. Learners will be able to experience first-hand the plight of the indigenous tribal areas and the exploration of related cultural knowledge.

The study collected pre- and post-test data through questionnaires, using covariates to analyze learners' perceptions of learning. The results of this study showed that cyber-physical metaverse learning environment had a significant impact on learning motivation, multicultural identity and sustainability thinking for culturally sustainable education. However, this study’s impact on critical thinking skills in students remains to be confirmed.

This is a quasi-experimental study of a single country’s elementary school children in the indigenous area, so its findings cannot be extrapolated to other areas or to learners of different ages.

This study introduces a framework for incorporating both virtual and real cultures to promote sustainable learning. The cyber-physical metaverse learning is used to supplement teaching activities to enhance learners' motivation in learning multicultural knowledge. Students were able to recognize and protect cultural assets, as well as emphasize the importance of sustainable development.