Search results

The purpose of this paper is devoted to application of the emulsion polymer of poly(methyl methacrylate-co-butyl acrylate) prepared with in situ nano-silica as a novel tanning agent of hide to partly or totally replace chrome salt and to improve physical, thermal and mechanical properties of the tanned leather and to reduce the environmental impact of chrome tanning effluent.

Polymer/nano-silica hybrid emulsions were prepared via in situ seed emulsion polymerisation. The prepared polymers were characterised for solid content, molecular weight, viscosity, drying time, minimum film-forming temperature (MFFT) and microstructures (via transmission electron microscopy). The mechanical, thermal and surface morphological (by scanning electron microscope) properties of the treated samples were also investigated. The influences of the increase in the content of organic nano-silica on the properties of the tanned leather are discussed.

It was found that the viscosity, the particle size and the solid content of the prepared polymers increased as the content of the nano-silica increased while gloss and drying time of the resulting polymer film decreased. Tanning buffalo hide by Polymer F (containing a high content of nano-silica) gave desirable properties in terms of tensile strength, thermal stability and shrinkage temperature.

This paper discusses the preparation and the characterisation of emulsion polymers with in situ nano-silica and their application in tanning process to enhance and improve the leather quality, as well as reduce the use of chrome tanning materials and consequently chrome tanning waste.

The tanned leather showed an improvement of physico-mechanical properties and enhancement of thermal stability. Furthermore, the tanned leather has uniform colour, softness and firmness of grain. All these promising results provide evidence to support the applicability of the prepared co-polymer/nano-silica emulsions as an efficient tanning agent that also provides lubricating properties for leather.

Since May 2015, REACH Annex XVII restricts Cr(VI) in leather articles or leather parts of articles that come into contact with skin to a concentration of less than 3 mg/kg. Cases of discovery of Cr(VI) in leather papers have been reported by the European rapid alert system on dangerous consumer products (RAPEX). The emulsion poly (methyl methacrylate-co-butyl acrylate) with in situ nano-silica that has been developed via the study reported in this paper is one of the better technologies for the reduction of chromium ratio used in tanning industry.

The purpose of this paper is to improve the dye affinity of natural dye of Terminalia chebula retzius (T. chebula) using the dye substrate of leather.

The dyeing conditions such as temperature, concentration of dye, and time are controlled by measuring the dye affinity. The effect of enzymatic post-tanning process on dye affinity is evaluated by using different type of proteases such as flavourzyme, alcalase, and bromelain. The optimum conditions for enzymatic post-tanning process are evaluated depending on different pH, temperature, and concentration of enzyme.

The highest dye affinity was obtained at 50°C using a dye concentration of 200 percent (owf) for 30 min treatment by measuring of K/S values of dyed leather. Distilled water was proved as a better extraction liquid to improve the dye affinity of T. chebula. The K/S values of dyed leather were enhanced after the enzymatic post-tanning process by flavourzyme. Moreover, the fastness properties against the rubbing and dry cleaning of the dyed leather were improved by the enzymatic post-tanning process.

In this paper, the enzymatic post-tanning process is introduced as the method to improve the dye affinity in natural dyeing using Terminalia chebula retzius (T. chebula) applied to leather. The results of the study could be applied for further natural dyeing of leather using various natural dyes.

The atmosphere of a tannery is one of the most highly corrosive of industrial atmospheres. Humidity is high, often containing corrosive vapours from the various liquors used in tanning processes, and the tanner has to choose his metal materials carefully. An additional hazard is the danger of harmful corrosion products dropping on to the skins and hides. This article describes the metals used for different tanning processes and also methods of protecting structural steelwork of the tannery.

Diffusion of fake news and pseudo-facts is becoming increasingly fast-paced and widespread, making it more difficult for the general public to separate reliable information from misleading content. The purpose of this article is to provide a more advanced understanding of the underlying processes that contribute to the spread of health- and beauty-related rumors and of the mechanisms that can mitigate the risks associated with the diffusion of fake news.

By adopting denialism as a conceptual lens, this article introduces a framework that aims to explain the mechanisms through which fake news and pseudo-facts propagate within the health and beauty industry. Three exemplary case studies situated within the context of the health and beauty industry reveal the persuasiveness of these principles and shed light on the diffusion of false and misleading information.

The following seven denialistic marketing tactics that contribute to diffusion of fake news can be identified: (1) promoting a socially accepted image; (2) associating brands with a healthy lifestyle; (3) use of experts; (4) working with celebrity influencers; (5) selectively using and omitting facts; (6) sponsoring research and pseudo-science; and (7)exploiting regulatory loopholes. Through a better understanding of how fake news spreads, brand managers can simultaneously improve the optics that surround their firms, promote sales organically and reinforce consumers’ trust toward the brand.

Within the wider context of the health and beauty industry, this article sets to explore the mechanisms through which fake news and pseudo-facts propagate and influence brands and consumers. The article offers several contributions not only to the emergent literature on fake news but also to the wider marketing and consumer behavior literature.

The primary aim of the research reported here is to provide strategic guidance for the development of a national communication strategy to improve sun protection practice amongst young people.

The research adopted an exploratory approach, employing qualitative focus groups to represent three population groups, mothers, teenagers and young adults living independently of the family home. A total of 12 focus groups were conducted (with six to eight participants per group) in the UK. Participants were recruited door‐to‐door using quota sampling methods.

Consistent with other studies, awareness of sun protection measures was high compared with actual practice. A number of factors were identified which help to explain this behaviour deficit. These include environment and exposure context, financial cost, understanding of protection process, behavioural influence and control, experiential learning and benefits attached to tanning.

While the findings highlight the importance of supporting parents through the provision of information and guidance, they also identified a need to develop initiatives specifically tailored to meet the needs of young people as they achieve independence.

This chapter aims to identify, analyse, classify and rank the sustainability indices and internationalisation challenges of the footwear industry in the emerging economy of Iran. This would provide deeper decision-making insights into Iranian footwear businesses. First, a list of sustainability indices and internationalisation challenges was obtained by reviewing the literature. Then, a combination of multi-criteria decision-making (MCDM) approaches was implemented. The initial sustainability indices and internationalisation challenges were screened using the fuzzy Delphi method, keeping a total of 14 criteria. The best–worst method (BWM) was employed to weigh and rank the criteria. The interpretive structural modelling (ISM) technique and cross-impact matrix applied in MICMAC were employed to visualise the conceptual model based on the levels and classification of the important criteria for the internationalisation of the Iranian footwear industry. The 14 criteria were demonstrated to be important in internationalisation. The most critical sustainability indices were reducing hazardous substances in leather tanning and labour education and training. In contrast, exchange rate instability in Iran’s economy and strict chemical regulations for clothing and footwear were found to be the most important internationalisation challenges. Hence, these criteria should be considered in the internationalisation strategies of the Iranian footwear industry. A combined multilayer sustainable decision-making approach was used to analyse the Iranian footwear industry’s essential sustainability indices and internationalisation challenges. Furthermore, implications and insights are offered to footwear businesses for future decision-making.

The purpose of this paper is to demonstrate the difference in firm performance between pollution prevention and pollution control strategies using a selected case study from the Indian leather industry.

This study followed a case study-based inductive research approach to validate the proposed preposition on field. The case-study analysis was based on qualitative and quantitative data. The authors developed a questionnaire and an interview protocol to capture the data about different industrial practices and motivation behind them. The study followed the concept of the triple bottom line approach for assessing the progress of the case firm on sustainability scale.

With the help of pollution preventive measures, such as replacement of salted skin with fresh skin and chromium salt with a phosphonium-based tanning agent, the case firm could overcome the biggest challenge of bringing down the level of total dissolved solid from 40,000 to 5,000 ppm in the raw effluent. Moreover, the firm has successfully recycled and converted tannery scraps and other waste into organic manure for internal use in its own plantations.

The findings of this study could not be generalized as these are based on a single case study.

This study presents an example of sustainable practices and their benefits to the Indian leather industry to follow.

Presents a case study on quick response practices in a supply chain within the Australian textiles, clothing and footwear (TCF) industry, conducted as part of a government‐led project aimed at improving the performance of the Australian TCF industry towards becoming more internationally competitive. Details of the Australian TCF Industry Quick Response Program are provided, which comprised six major activities: assessing company commitment and readiness; formulation of supply chain clusters; roundtable meetings; workshops and seminars; implementation of quick response techniques and technologies; and audits to assess improvements. The supply chain consists of Myer/Grace Brothers (retailer), Diana Ferrari (shoe manufacturer), Burrowes (shoe components supplier), and Packer Tannery (leather supplier). The activities undertaken within this supply chain are discussed and some of the key lessons learnt from this case study are highlighted.

The Indian leather industry contributes to economic growth at a significant environmental cost. Due to the rising global demand for sustainable leather products, promoting efficient input utilisation has become vital. This study measures input efficiency and its determinants for leather industry in order for it to improve its future performance.

In the first stage, bootstrap data envelopment analysis (DEA) approach is used for measuring efficiency and analysing firms' differences based on their geographical location, organisational structures, urban-rural location and sub-industrial groups. A second stage regression examines efficiency determinants using size, age, skill and capital-labour intensity as the explanatory variables.

Efficiency result shows a significant potential of minimising inputs by 47% provided the firms adopt best practices. West Bengal firms, urban located firms, individual and proprietorship owned firms and leather consumer goods firms are found to be relatively efficient to their counterparts. Size, skilled managerial staff and labour-intensive firms positively affect efficiency.

Construction of well-connected roads for accessing urban retail markets and provision of reliable electricity would improve efficiency of rural firms. Small-scale enterprises have a larger share in Indian leather industry; therefore, policy should focus on enhancing the firms' scale and investing in training facilities to skill employed labour for ensuring optimal use of inputs.

Previous studies on the leather industry have used the conventional DEA efficiency measurement approach. This study uses DEA bootstrapping model for robust efficiency estimates and provides consistent inferences about the determinants.

Presents the findings of a study conducted to examine the efficiency of the combined anaerobic‐aerobic reactors for the treatment of three different tannery industrial wastewaters, focusing on the fate of chromium and other associated metals. Examines elimination rates of such metals with respect to each successive treatment process. Discusses the correlation between the chemical characteristics of the wastewater influent and effluent along with the level of heavy metals in such wastewater and the produced sludge. Confirms that the use of such sludge in agriculture should be restricted and recommends the recovery of Cr from the tanning sludge.