Search results
1 – 10 of 45Amir Rahimzadeh Dehaghani, Muhammad Nawaz, Rohullah Sultanie and Tawiah Kwatekwei Quartey-Papafio
This research studies a location-allocation problem considering the m/m/m/k queue model in the blood supply chain network. This supply chain includes three levels of suppliers or…
Abstract
Purpose
This research studies a location-allocation problem considering the m/m/m/k queue model in the blood supply chain network. This supply chain includes three levels of suppliers or donors, main blood centers (laboratories for separation, storage and distribution centers) and demand centers (hospitals and private clinics). Moreover, the proposed model is a multi-objective model including minimizing the total cost of the blood supply chain (the cost of unmet demand and inventory spoilage, the cost of transport between collection centers and the main centers of blood), minimizing the waiting time of donors in blood donating mobile centers, and minimizing the establishment of mobile centers in potential places.
Design/methodology/approach
Since the problem is multi-objective and NP-Hard, the heuristic algorithm NSGA-II is proposed for Pareto solutions and then the estimation of the parameters of the algorithm is described using the design of experiments. According to the review of the previous research, there are a few pieces of research in the blood supply chain in the field of design queue models and there were few works that tried to use these concepts for designing the blood supply chain networks. Also, in former research, the uncertainty in the number of donors, and also the importance of blood donors has not been considered.
Findings
A novel mathematical model guided by the theory of linear programming has been proposed that can help health-care administrators in optimizing the blood supply chain networks.
Originality/value
By building upon solid literature and theory, the current study proposes a novel model for improving the supply chain of blood.
Details
Keywords
The purpose of the study is to examine the research problem that represents an attempt to approximate the importance of quality costing in managing a modern enterprise using the…
Abstract
Purpose
The purpose of the study is to examine the research problem that represents an attempt to approximate the importance of quality costing in managing a modern enterprise using the selected enterprises from small and medium-sized enterprises (SMEs) in Poland.
Design/methodology/approach
The primary goal of the research is a need to acquire knowledge about the use of quality cost accounts in enterprises operating in Poland. The research has been conducted in the SMEs of production and services. From October 2018 to December 2018, survey-based research was carried out in the selected SMEs of production and service in Poland. The targeted participants of the study are from the medium-sized enterprises, employing 50–250 people.
Findings
The pilot studies conducted in companies indicate that modern enterprises are focused on quality. Many enterprises declare to be continuously improving quality system and quality costing. However, generally, these are large companies that have implemented ISO standards, often part of international corporations. The survey result of the study shows that medium-sized enterprises still make little use of modern cost accounting variants. Based on the study, only 9.75% (39 enterprises) from a representative group of 400 companies from the sectors of manufacturing, services and production as well as service companies apply quality costing. Some of the other enterprises are only taking measures to implement quality cost accounting.
Research limitations/implications
The research has been conducted in randomly selected SMEs in the form of a questionnaire interview. In order to further analyze the construction of quality cost management (QCM) systems and the use of information from QCM by enterprises, case study method should be used more widely.
Practical implications
The results of the study provide useful help for companies that are quality-oriented and want to implement quality costing. The survey has been conducted in 400 enterprises, and the survey results of considered SMEs reveal the most important aspects of the application of quality costing.
Originality/value
The questionnaire used, the answers provided and the resulting conclusions fill the identified research gap. In the author's opinion, findings of research are relevant and useful, not only for accounting practice but also for theory. They show that although TQM and quality costing have been very popular in the literature since the 1990s, the degree of application of quality costing in practice (except for large, often international companies) is too low. So, the suitability of QCM in managing a modern enterprise from the SMEs should be promoted.
Details
Keywords
Md.Tanvir Ahmed, Hridi Juberi, A.B.M. Mainul Bari, Muhommad Azizur Rahman, Aquib Rahman, Md. Ashfaqur Arefin, Ilias Vlachos and Niaz Quader
This study aims to investigate the effect of vibration on ceramic tools under dry cutting conditions and find the optimum cutting condition for the hardened steel machining…
Abstract
Purpose
This study aims to investigate the effect of vibration on ceramic tools under dry cutting conditions and find the optimum cutting condition for the hardened steel machining process in a computer numerical control (CNC) lathe machine.
Design/methodology/approach
In this research, an integrated fuzzy TOPSIS-based Taguchi L9 optimization model has been applied for the multi-objective optimization (MOO) of the hard-turning responses. Additionally, the effect of vibration on the ceramic tool wear was investigated using Analysis of Variance (ANOVA) and Fast Fourier Transform (FFT).
Findings
The optimum cutting conditions for the multi-objective responses were obtained at 98 m/min cutting speed, 0.1 mm/rev feed rate and 0.2 mm depth of cut. According to the ANOVA of the input cutting parameters with respect to response variables, feed rate has the most significant impact (53.79%) on the control of response variables. From the vibration analysis, the feed rate, with a contribution of 34.74%, was shown to be the most significant process parameter influencing excessive vibration and consequent tool wear.
Research limitations/implications
The MOO of response parameters at the optimum cutting parameter settings can significantly improve productivity in the dry turning of hardened steel and control over the input process parameters during machining.
Originality/value
Most studies on optimizing responses in dry hard-turning performed in CNC lathe machines are based on single-objective optimization. Additionally, the effect of vibration on the ceramic tool during MOO of hard-turning has not been studied yet.
Details
Keywords
Li Xuemei, Yun Cao, Junjie Wang, Yaoguo Dang and Yin Kedong
Research on grey systems is becoming more sophisticated, and grey relational and prediction analyses are receiving close review worldwide. Particularly, the application of grey…
Abstract
Purpose
Research on grey systems is becoming more sophisticated, and grey relational and prediction analyses are receiving close review worldwide. Particularly, the application of grey systems in marine economics is gaining importance. The purpose of this paper is to summarize and review literature on grey models, providing new directions in their application in the marine economy.
Design/methodology/approach
This paper organized seminal studies on grey systems published by Chinese core journal database – CNKI, Web of Science and Elsevier from 1982 to 2018. After searching the aforementioned database for the said duration, the authors used the CiteSpace visualization tools to analyze them.
Findings
The authors sorted the studies according to their countries/regions, institutions, keywords and categories using the CiteSpace tool; analyzed current research characteristics on grey models; and discussed their possible applications in marine businesses, economy, scientific research and education, marine environment and disasters. Finally, the authors pointed out the development trend of grey models.
Originality/value
Although researches are combining grey theory with fractals, neural networks, fuzzy theory and other methods, the applications, in terms of scope, have still not met the demand. With the increasingly in-depth research in marine economics and management, international marine economic research has entered a new period of development. Grey theory will certainly attract scholars’ attention, and its role in marine economy and management will gain considerable significance.
Details
Keywords
Milena Kiliszkiewicz, Dariusz Przybylski, Jan Felba and Ryszard Korbutowicz
The purpose of this paper is to analyze the individual steps during the printing of capacitor structures. The method of substrate preparation, the obtained roughness of conductive…
Abstract
Purpose
The purpose of this paper is to analyze the individual steps during the printing of capacitor structures. The method of substrate preparation, the obtained roughness of conductive and dielectric layers are examined. Moreover, the capacitances of the obtained capacitors were examined.
Design/methodology/approach
Surface roughness and microscopic analysis were used to assess the quality of printed conductive structures. Two criteria were used to assess the quality of printed dielectric structures: the necessary lack of discontinuity of layers and minimal roughness. To determine the importance of printing parameters, a draft experimental method was proposed.
Findings
The optimal way to clean the substrate has been determined. The most important parameters for the dielectric layer (i.e. drop-space, table temperature, curing time and temperature) were found.
Research limitations/implications
If dielectric layers are printed correctly, most problems with printing complex electronic structures (transistors, capacitors) will be eliminated.
Practical implications
The tests performed identified the most important factors for dielectric layers. Using them, capacitors of repeatable capacity were printed.
Originality/value
In the literature on this subject, no factors were found which were responsible for obtaining homogeneous dielectric layers.
Details
Keywords
This study aims to help nonprofit organizations (NPOs) implement business excellence models (BEMs). The authors identify and rank critical success factors and barriers to…
Abstract
Purpose
This study aims to help nonprofit organizations (NPOs) implement business excellence models (BEMs). The authors identify and rank critical success factors and barriers to implementing BEMs among NPOs in Saudi Arabia and investigate the impact of human resources availability on BEM implementation in these organizations.
Design/methodology/approach
Based on the review of relevant literature, the authors designed a questionnaire completed by 138 NPOs. Factor analysis was used to measure and rank the criticality of success factors and barriers to BEM implementation. A Kruskal–Wallis nonparametric test was conducted to compare answers across groups classified by the number of full-time employees in the organization.
Findings
The study identifies the five most critical success factors for implementing BEMs in Saudi NPOs: data analysis and reporting capabilities, effective organizational communication, implementation strategy and approach, use of benchmarking and adoption of a clear governance framework. The five most critical barriers to implementing BEMs are the lack of a culture of continuous improvement, organizational strategy, qualified employees, customer orientation and clear organizational roles and responsibilities. The number of full-time employees in Saudi NPOs does not significantly impact the success or failure of implementing BEMs.
Originality/value
This paper is a continuation of research that aims to increase BEM adoption among NPOs, including micro-NPOs, in Saudi Arabia and, by extension, other countries.
Details
Keywords
Diego Tlapa, Jorge Limon, Jorge L García-Alcaraz, Yolanda Baez and Cuauhtémoc Sánchez
The purpose of this paper is to extend the understanding of Six Sigma (SS) and the underlying dimensions of its critical success factors (CSF) via an analysis of the effects of…
Abstract
Purpose
The purpose of this paper is to extend the understanding of Six Sigma (SS) and the underlying dimensions of its critical success factors (CSF) via an analysis of the effects of top management support (TMS), implementation strategy (IS), and collaborative team (CT) on project performance (PP) in Mexican manufacturing companies.
Design/methodology/approach
Based on a SS literature review, a survey was conducted to capture practitioners’ viewpoints about CSFs for SS implementation and their impact on performance in manufacturing companies. A factor analysis and structural equation modeling were conducted in order to identify and analyze causal relationships.
Findings
The results suggest that CSFs grouped in the constructs TMS, IS, and CT have a positive impact on PP as measured by cost reduction, variation reduction, and quality improvement.
Research limitations/implications
Although the empirical data collected supported the proposed model, results might differ among organizations in different countries. In addition, the study did not analyze a unique performance metric; instead, general PP dimensions were used.
Practical implications
Boosting the TMS, IS, and CT enhances positive PP of SS in manufacturing companies.
Originality/value
IS as a construct has not been studied exhaustively; this work contributes to a better understanding of it and its impact on PP. Additionally, studies of SS in Latin America are limited, so this study gives a complementary vision to practitioners and researchers about it.
Details
Keywords
Xuemei Li, Ya Zhang and Kedong Yin
The traditional grey relational models directly describe the behavioural characteristics of the systems based on the sample point connections. Few grey relational models can…
Abstract
Purpose
The traditional grey relational models directly describe the behavioural characteristics of the systems based on the sample point connections. Few grey relational models can measure the dynamic periodic fluctuation rules of the objects, and most of these models do not have affinities, which results in instabilities of the relational results because of sequence translation. The paper aims to discuss these issues.
Design/methodology/approach
Fourier transform functions are used to fit the system behaviour curves, redefine the area difference between the curves and construct a grey relational model based on discrete Fourier transform (DFTGRA).
Findings
To verify its validity, feasibility and superiority, DFTGRA is applied to research on the correlation between macroeconomic growth and marine economic growth in China coastal areas. It is proved that DFTGRA has the superior properties of affinity, symmetry, uniqueness, etc., and wide applicability.
Originality/value
DFTGRA can not only be applied to equidistant and equal time sequences but also be adopted for non-equidistant and unequal time sequences. DFTGRA can measure both the global relational degree and the dynamic correlation of the variable cyclical fluctuation between sequences.
Details
Keywords
Anton Wiberg, Johan Persson and Johan Ölvander
This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM…
Abstract
Purpose
This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM methods and software. The focus is on the design engineer’s role in the DfAM process and includes which design methods and tools exist to aid the design process. This includes methods, guidelines and software to achieve design optimization and in further steps to increase the level of design automation for metal AM techniques. The research has a special interest in structural optimization and the coupling between topology optimization and AM.
Design/methodology/approach
The method used in the review consists of six rounds in which literature was sequentially collected, sorted and removed. Full presentation of the method used could be found in the paper.
Findings
Existing DfAM research has been divided into three main groups – component, part and process design – and based on the review of existing DfAM methods, a proposal for a DfAM process has been compiled. Design support suitable for use by design engineers is linked to each step in the compiled DfAM process. Finally, the review suggests a possible new DfAM process that allows a higher degree of design automation than today’s process. Furthermore, research areas that need to be further developed to achieve this framework are pointed out.
Originality/value
The review maps existing research in design for additive manufacturing and compiles a proposed design method. For each step in the proposed method, existing methods and software are coupled. This type of overall methodology with connecting methods and software did not exist before. The work also contributes with a discussion regarding future design process and automation.
Details
Keywords
Farid Salari, Paolo Bosetti and Vincenzo M. Sglavo
Particles bed binding by selective cement activation (SCA) method is a computer-aided manufacturing (CAM) technique used to produce cementitious elements. A computer-aided design…
Abstract
Purpose
Particles bed binding by selective cement activation (SCA) method is a computer-aided manufacturing (CAM) technique used to produce cementitious elements. A computer-aided design file is sliced to generate G-codes before printing. This paper aims to study the effect of key input parameters for slicer software on the final properties of printed products.
Design/methodology/approach
The one factor at a time (OFAT) methodology is used to investigate the impact of selected parameters on the final properties of printed specimens, and the causes for the variations in outcomes of each variable are discussed.
Findings
Finer aggregates can generate a more compact layer, resulting in a denser product with higher strength. Fluid pressure is directly determined by voxel rate (rV); however, high pressures enable better fluid penetration control for fortified products; for extreme rVs, residual voids in the interfaces between successive layers and single-line primitives impair mechanical strength. It was understood that printhead movement along the orientation of the parts in the powder bed improved the mechanical properties.
Originality/value
The design of experiment (DOE) method assesses the influence of process parameters on various input printing variables at the same time. As the resources are limited, a fractional factorial plan is carried out on a subset of a full factorial design; hence, providing physical interpretation behind changes in each factor is difficult. OFAT aids in analyzing the effect of a change in one factor on output while all other parameters are kept constant. The results assist engineers in properly considering the influence of variable variations for future DOE designs.
Details