Search results

The construction industry is shifting towards becoming more circular by reducing waste, reusing building materials and embracing regenerative solutions for energy generation and biodiversity conservation. Thus, construction professionals must perform diversified services to achieve a circular built environment (CBE). Implementing resource planning and waste management in CBE has already posed challenges to the quantity surveying profession; thus, quantity surveyors (QSs) should be equipped with new roles and competencies to tackle challenges in achieving a CBE. Hence, this study aimed to investigate the functions and competencies of QSs at the design and building material sourcing stages in achieving a CBE according to 3R principles.

The research apprehended a qualitative approach, including two expert interview rounds adhering to the Delphi technique with 14 and 11 experts per each round. Manual content analysis was incorporated to analyse the collected data.

The research findings revealed the important roles and competencies of QSs in achieving a CBE. In addition, essential functions and competencies were categorised according to the 3R principles (reduce, reuse, recycle) to successfully implement CBE during the Design and Building Material Sourcing stages. According to the 3R principles of CBE, cost control, cost planning, feasibility studies, measurement and quantification, risk management, value engineering and innovations and technologies were well-received by most interviewees as essential roles of QSs during the Design and Building Material Sourcing stages. Further, basic/mandatory competencies (personal, interpersonal, professional practice and business skills), economic analysis, BIM management, cost management and risk management are highly regarded by experts for QS as important competencies to achieve CBE.

With new construction trends, QSs must enhance their conventional roles and competencies and search for new skills and competencies. Those skills and competencies could be linked to the CE concept, either directly or indirectly. Since QS holds a prominent place in sustainable construction in CBE, adapting to changes in the construction industry such as CBE is timely for QSs. Further, there is a shortage of literature regarding QSs' roles and competencies in achieving a CBE; thus, this study will contribute by identifying new avenues for QSs in achieving a CBE in the practice and the research.

Individuals generate plenty of waste that is affecting the life while consumption of air and water at the base. The increasing industrialization, population and waste generation without proper measures of waste management are leading to major challenges to environmental sustainability. Considering these challenges, the present study focuses on the types and sources of waste generation and waste reduction by encouraging the reduction, recycling and reuse of waste products. The study aims to provide a well-functioning sustainable waste management system, that incorporates feedback loops, focuses on processes, embodies adaptability and diverts waste from disposal.

The university under study is situated at the central location of Pune City in India. The university has diverse units like academic and admin buildings, canteens and mess, hostels, a clinic, workshops and gardens. To fulfil the objective of this study a qualitative case study approach of research was adopted. A total of thirty-three representatives and waste management personnel from various units of the university were interviewed. The interviews were semi-structured and the duration of it was around 25–55 min. The interview transcripts were coded, and qualitative analysis was conducted.

This study proposes a strategic sustainable waste management model for environmental sustainability that brings circularity by closing the loops and focusing on sustainable development goals.

The findings of this research can guide universities to manage the waste generated through various sources and attain sustainable development goals and environmental sustainability at large by closing the loops. The study provides insights into waste management and environmental sustainability. The universities can make their resources more circular by following the strategies of reducing, reusing and recycling (3R). This study recommends customization according to the needs of specific universities and institutions. Researchers can take this study further by testing and customizing it as per requirement. Also, an effort can be extended to implement the model in other related areas.

This research is a unique attempt to advance knowledge of waste management practices for sustainable development by exploring different techniques opted by for individual entities from the university campus to understand the environmental impact.

The circular economy (CE) represents an industry-wide transition from linear to circular processes. There has been a proliferation of literature on CE in the last decade. However, the existing studies on the adaption of CE in small and medium-sized enterprises (SMEs) are scarce. This study aims to develop a research agenda and the way forward for future researchers focusing on the adoption of CE.

This article analyses the CE concepts through a Systematic Literature Review (SLR). Coding and content analysis are performed to generate emergent themes with the help of “Atlas.ti” software.

The authors uncovered the contemporary significance of adopting CE and the state-of-the-art literature on CE. The study's findings fall into four broad themes: Technical know-how, resource and process optimization, reverse practices and technology and innovation. Ten thought-provoking questions were identified in the four themes that researchers can explore further in embracing CE to achieve sustainability in SMEs.

The study has highlighted the importance of CE adoption and CE's benefits to stakeholders across all three dimensions, i.e. social, economic and ecological. Practitioners can use the agenda in four themes to strengthen the practitioners' existing practices in SMEs to promote CE.

The study's uniqueness is the supply of current knowledge from diverse literature and practical consequences for SMEs. This study opens new lines of inquiry to adopt CE in SMEs, streamlining the existing literature into four themes to focus future research.

This article sheds light on the missing links concerning the study of using integrated enabling technologies toward sustainable and circular agriculture supply chains by examining the available literature and proposing future research possibilities.

The relevant literature was researched through online databases such as Scopus, Web of Science, Academic Search Premier, Emerald, IEEE Xplore, Science Direct, World Scientific Net and Springer-Link Journals, covering a period from 1999 to 2020. A systematic literature review based on 75 papers analyzed the integration of the concepts of enabling technologies, sustainability, circular economy and supply chain performance in agriculture supply chains.

It was identified that enabling technologies and agriculture supply chains alone have been explored further than integrated enabling technologies, sustainability, circular economy, supply chain performance and agriculture supply chains. Enabling technologies and agriculture supply chains' main findings are: enabling technologies have been studied to improve food safety, food quality and traceability in agriculture supply chains. The main results regarding integrated enabling technologies, sustainability, circular economy, supply chain performance and agriculture supply chains are: Internet of Things and information communication technology play an important role in addressing food security, traceability and food quality, which help achieve sustainable development goals.

This review study provides 13 research questions to underpin future trends regarding integrated technologies' application in agriculture supply chains for circular and sustainable growth.

Buoyed by the increasing demand for improved productivity and environmentally conscious manufacturing, research in the area of lean production and green manufacturing has experienced significant growth since Dües et al. (2013). Taking the latter as the point of reference, a review of recent developments in the complementary and conflicting areas between lean production and green manufacturing that has been missing is presented.

A systematic search was done to identify articles on lean production and green manufacturing from Scopus, Web of Science and Google Scholar. The population-intervention-outcome format was used to develop and answer the research questions. ATLAS.ti 22 was used to analyse 141 qualifying papers and identify the research themes.

Lean production and green manufacturing have strong synergy, and when integrated, they tend to deliver superior organisational performance than their individual implementations. This is consistent with the pre-2013 results, and other areas of synergy and divergence were also identified.

The study considers only papers published in the manufacturing sector after Dües et al. (2013). A review of lean production and green manufacturing in integrated product-service systems may also be relevant, especially due to the continuing trend since its introduction.

Any new adopter of lean production should consider implementing it simultaneously with green manufacturing.

This study establishes the persistence of the pre-2013 patterns of synergy and divergence between lean production and green manufacturing, and identifies new considerations for their joint implementation.

Circular economy (CE) is receiving increasing worldwide attention as a manner to overcome the challenges linked to current trends of unsustainable energy and resource consumption. This paper aims to fill this gap and analyze the adherence to sustainable, access-based and collaborative consumption practices by exploring the role of CE awareness, specifically in the context of Porto, the second-largest city of Portugal.

The methodology of choice is quantitative, based on partial least square-based structural equation modeling.

The result shows that there is an influence of CE awareness on subsequent sustainable consumption models.

Present research contributes to the theory on CE awareness and sustainable consumption. It proposes a model that could be applied in other countries. As this research is developed within the city of Porto, it may limit generalizations of obtained results.

As CE practices are embodied into national and local policies, this research contributes to understanding local contexts of CE practices dissemination, providing practical suggestions for businesses and policymakers aiming the transition to the CE.

An original approach to measuring the awareness of CE economy is proposed, that is analyzed not only from the familiarity perspective but in six dimensions of its construction: familiarity, importance, perception or interpretation, advantages, social impact and barriers in this process. Further, the conceptual model of the impact that these dimensions have on the adoption of sustainable consumption models (purchase of sustainable products, access-based and collaborative consumption) is proposed.

Circular economy (CE) is guided by principles, the key being the R-framework. All R-frameworks have a hierarchy. Although several studies have prioritized these principles, there is still an urgent call for country-specific prioritization. This study prioritized circular economy (CE) principles among Ghana's built environment (BE) professionals.

An explanatory sequential mixed methods approach was adopted. Six principles of CE were identified through a review of related literature and incorporated into a questionnaire. In total, 162 questionnaire responses were received. The quantitative data were analyzed through descriptive and inferential analyses. The data were further validated via semi-structured interviews with eight interviewees of different professional backgrounds in the BE.

The findings revealed that BE professionals in Ghana highly perceived CE principles as important. The findings further revealed the order of prioritization of the CE principles as follows: (1) recycle, (2) reuse, (3) repair/remanufacture, (4) renewable energy usage, (5) redesign and (6) reduce. To further elaborate on these prioritized principles via the qualitative phase, the interviewees agreed to and confirmed the importance of the identified principles through their verbatim comments.

Although there is a growing interest in research regarding CE in the Ghanaian construction industry, its principles have yet to be prioritized and ranked by professionals in the Ghanaian construction industry. This study unearths why, in terms of prioritization of the CE principles, the construction industry in Ghana does not follow the well-known hierarchy (i.e. reduce, reuse and recycle) in the order of high to low level of circularity.

City planning and construction have embraced circular economy principles, converting them into various indicators. Particularly in the European context, the question “what architecture for circularity?” is answered with policies focusing on techniques, materials and disassembling construction. This paper analyzes a new approach to sustainable design and explores the concept of Km0 architecture. The objective is to demonstrate the design strategies of a contemporary architecture based on local resources and knowledge, an architecture that works with the shortest possible loop in circularity, i.e. with the cycle that consumes the least amount of energy.

The paper presents two ways of understanding sustainability in architecture: the first as a result of policies and the second associated with the design and innovative-based New European Bauhaus initiative. Within the scope of this last understanding, the authors analyze three cases on the Spanish Mediterranean coast that have recently received media attention and prominence. The selection responds to a specific climate adaption through a certain typological and functional diversity of the works.

The studied cases exhibit a more equitable and cost-effective circularity based on the time factor, have long life-cycle designs and serve as repositories of cultural identity. Km0 architecture reduces emissions using local resources and mitigates environmental conditions by combining traditional and modern design strategies.

This paper fulfills an identified need to study the local understandings of the built environment that would ensure a more fair and inclusive European green transformation.

Circular economy (CE) is increasingly used as a system solution framework for tackling climate change. Existing CE solutions have been found effective in other sectors but ineffective in the construction sector (CS) due to the inability to account for unique CS dynamics that are essential for its success. With CS being one of the worst polluters, this research aimed to investigate critical success factors (CSFs) and a practical CE implementation framework for the sector.

Mixed methods research involving descriptive surveys of construction professionals in Kazakhstan, Malaysia and Turkey was used to explore priority dimensions of McKinsey’s ReSOLVE (“regenerate, share, optimize, loop, virtualize and exchange”) circulatory framework, and the associated CSFs that underpin successful implementation of CE in the sector. Empirical data were analyzed using the fuzzy analytical hierarchy process (F-AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) algorithm.

Results showed that “Optimize” and “Loop” were the most critical of the six dimensions of CE implementation framework for successful circularity transition of the CS in each case study country. Twenty-seven CSFs identified in the study were clustered into seven key action areas for successful rollout of the ReSOLVE framework, namely, legislative and documentation, financial, design, external/stakeholder, technological, internal and construction/production/waste management.

The study makes a unique contribution to existing knowledge by exploring ReSOLVE-based CSFs for successful CE implementation in the CS through the lenses of experienced construction practitioners and experts in developing countries. The findings are expected to provide a deeper insight into the most significant CSFs to be focused on with the limited resources available to decision-makers in the CS. The findings would also inform regulatory policy reformations aimed at facilitating greater rate of implementation of CE in the construction value chain.

The study – the first of its kind – established and validated a wholistic and construction-specific CE implementation framework to guide built environment professionals and policymakers in formulating a roadmap for successful CS’s transition to circularity and hopefully paving the way for improved economic, social and environmental performance of the sector.

This study aims to examine the strategies that can be adopted to enhance the practice of circular economy (CE) principles among built environment (BE) firms operating in the Ghanaian Construction Industry (GCI).

A structured questionnaire survey was used to solicit the views of 162 BE professionals working in construction, consulting, and developer firms on the issue under investigation. The questionnaire was developed through a review of related literature and complemented with a pilot review. Data were analysed by descriptive and inferential statistics.

The findings revealed four major categories of strategies (i.e. systems and technical related strategies, market orientation and operational strategies, knowledge dissemination and awareness-related strategies, and environmental and regulatory strategies) to promote the practice of the principles of CE among BE professionals in the GCI.

This study’s findings provide insights into an under-investigated topic in the construction industry, especially, in a developing country such as Ghana, and offer new and additional information and insights into the current state-of-the-art on CE implementation.