Search results

This paper aims to analyze regulation regarding sustainable construction procurement in Southeast Asia and provide a reconstruction of regulation regarding the sustainable construction procurement to prevent land degradation.

This was done through legal research methods, mainly historical and systematical interpretation. The approaches used in this paper are the conceptual approach, statute approach and comparative approach.

By analyzing the related legal norms, it can be understood that many nations in Southeast Asia do not have regulation regarding sustainable construction procurement. Between Indonesia, Singapore and Thailand, only Indonesia has a ministrial regulation that provides general norms regarding sustainable construction procurement. Regarding the reconstruction of regulation, the bare minimum standards consist of principle, indicators, pillar, the phases of the procurement, law enforcement, both preventive and repressive, and sustainable procurement committee.

This research is limited to regulation in Southeast Asian region. By analyzing the regulation, this paper will provide a reconstruction of regulations regarding sustainable construction procurement that will act as an ground rules. Having the same ground rules will create synergies between countries in Southeast Asia to apply the principles of sustainable procurement and move together toward to prevent land degradation.

To the best of the authors’ knowledge, this paper is the first systematic legal research that compares regulations from three nations in Southeast Asia regarding sustainable construction procurement and also the first paper to provide reconstruction of regulation regarding sustainable construction procurement to prevent land degradation.

The built environment is responsible for approximately 40% of the world’s energy consumption, 30% of raw material use, 25% of solid waste, 25% of water use, 12% of land use and 33% of greenhouse gas emissions. Thus, environmental improvement and decarbonization are becoming increasingly critical objectives for the construction industry. Sustainable construction can be achieved through several practices, including: considering life-cycle assessment, circular construction, resource efficiency and waste management and providing eco-efficient materials, reducing energy demands and consumption and incorporating low-carbon technologies and renewable energy sources. To achieve sustainable construction goals, it is critical to educate the future workforce about decarbonization, circular construction and how to overcome the challenges involved in transitioning to sustainable construction. This study aims to understand the gap in student knowledge related to decarbonization and circular construction and the importance of incorporating these topics in civil engineering and construction management curricula.

This study surveyed 120 undergraduate and graduate students at one of the largest minority-serving institutions in the USA to understand the gap in student knowledge related to decarbonization and circular construction as well as the importance of incorporating these topics in civil engineering and construction management curricula. The authors conducted several statistical measures to assess the consistency, reliability and adequacy of the sample size, including the Kaiser–Meyer–Olkin measure of sampling adequacy, the normality test to evaluate the appropriateness of using an ordered probit regression analysis and a multicollinearity test to observe the correlation between independent variables. The data was analyzed using ordered probit regression analysis to investigate the need for a curriculum that serves in educating students about decarbonization and circular construction.

The results of this research highlight the gaps in students’ knowledge pertaining to sustainable practices and the importance of providing future construction workforce with such knowledge to tackle global inevitable challenges.

The findings of this study contribute to sustainable construction bodies of knowledge by advocating for a reformed curriculum to prepare the future workforce and adopt less carbonized, more circular approaches within the engineering and construction industry.

With the increasing demand for sustainable developments, higher education should focus on teaching both sustainable buildings and infrastructure systems. This study aims to investigate the existing sustainable infrastructure (SI) teaching efforts in sustainability courses; identify best practices to integrate SI throughout bachelor’s and master’s programs under the construction management (CM) curricula; and propose guidelines for students to obtain Envision sustainability professional (ENV SP) credential during sustainability education.

This study conducted keywords search within the sustainability course descriptions under the American Council for Construction Education accredited CM curricula to locate SI topics. Additionally, this research collected inputs from the Envision Academic Committee members to develop a matrix representing the best practices for integrating SI in higher education and provided a guide with a step-by-step procedure to obtain ENV SP credentials.

This study identified a gap regarding the availability of SI education and offered best practices on how CM curricula might nurture such knowledge. Phase I highlighted that only two CM programs taught infrastructure sustainability, and three programs offered sustainability credentialing processes under a bachelor’s degree. Phase II developed a framework that offered a variety of pedagogical approaches and outlined the process for obtaining the ENV SP certificate for CM students in the freshman, sophomore, junior and senior years.

The findings of this study can facilitate CM education to create awareness among the future workforce and encourage them to establish skills pertaining to the economic, social and environmental implications while designing SI.

The concept of a creative place has been considered by experts, but a review of the research background shows that the definitions provided for creative place are different, and the factors that make an urban space a creative place are not clear. The main purpose of this study is to investigate the concept of creative place and to extract the indicators that make an urban space considered a creative place.

By extensive library studies and using a specialized panel, 59 items in the form of 12 indicators were extracted as identifiers of a creative place and a researcher-made questionnaire was prepared and tested in a case study. Data analysis of this study was performed in two stages by using the factor analysis method in R software.

The factors of “competitive advantage (economically)”, “freedom”, “attractiveness”, “entrepreneurship and professionalism”, “culture and art”, “vitality”, “diversity”, “distinction”, “participation”, “reconstruction, nobility and infrastructure”, “meaning” and “creative experiences” are important as identifiers of creative place, respectively. The evaluation of the case study showed that the total score of creative places in this urban space is 69.6 (out of 100) and “meaning” gained the most point in this urban space.

The factors of this research can be provided to architects and urban planners as identifiers of a creative place and a case study can be evaluated in terms of the degree of compliance with creative place identifiers.

Considering the high impacts caused by manufacturers on sustainability, this research aims to analyse how Brazilian manufacturing companies deal with sustainability issues. To do this, sustainability parameters are analysed to verify possible improvement opportunities.

This research uses Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and grey relational analysis (GRA) to analyse data from a survey with Brazilian professionals regarding aspects of sustainability in Brazilian manufacturers. The average score levels and the ranking of these aspects are evaluated.

Through the analysis performed, it was possible to verify that manufacturers in Brazil still have a long path to travel in the search for sustainability. Comparatively, it was observed that practices related to local communities received the lowest scores, on average. In contrast, on average, practices related to productivity and efficiency, occupational accidents and diseases, and compliance with environmental legislation received the highest scores.

The results presented in this paper show that there are several improvement opportunities to be sought by Brazilian manufacturing companies regarding sustainability aspects. Particular attention should be given to local community practices. Besides companies, policymakers can also use this analysis to guide their future actions, encouraging manufacturing companies to better support the local community. Researchers can use the instrument of analysis (TOPSIS and GRA) to analyse other realities and compare them with the findings presented.

The analysis of Brazilian manufacturing companies’ reality regarding sustainability practices and considering a model based on Global Reporting Initiative (GRI) and Brazilian Institute of Corporate Governance (IBGC) is novel in the literature. The use of TOPSIS and GRA, as well as comparing their findings, generated interesting insights for companies, policymakers and researchers. The analysis presented shows the need for more significant concern for local communities and can be used to support further debates and action plans to minimise this gap.

This study proposes a garment modularization model based on an interactive genetic algorithm. The suggested model consists of extraction and identification of parts and the determination and implementation of connections. Rules and corresponding mathematical equations have been formulated for the part's extractions from the discarded products and connections for the redesigned products.

Sustainability entices scholars and practitioners while referring to reducing waste to control environmental degradation. One of the ways to safeguard natural resources is to increase the reuse of old or discarded products. The current study focuses on the redesign process to improve the reuse of products.

The intelligent system proposed based on the modularization techniques is expected to simplify and quantify the redesign process. The model can further help in the minimization of wastage and environmental degradation.

Presently, manual decisions are taken by the designers based on their memory, experience and intuition to extract and join the parts.

The conceptualization of smart emerged by technological advancements penetrated the tourism industry with the pace of globalization transformed the destinations providing digitalized products. Even though smart tourism destinations are initiated by advanced technologies, the notion evolved in embracing Sustainable Development Goals (SDGs) project economic, social, and environmental proliferation. A tourism destination is counted as “smart” which provides advanced technologies to improve the quality of tourists' experiences and enhance the residents' quality of life. The structure of a smart tourism destination is established on four basic pillars that cover technology, innovation, accessibility, and sustainability issues. Designating the notion of smart into tourism destinations is extremely vital since the shifting paradigm of tourists’ demands concern sustainability. The development of smart in a tourism destination is a crucial concern for destination management organizations (DMOs) integrating key destination components with the dimensions of a smart city to enhance the tourists' satisfaction and competitiveness of the destination. Therefore, one aim of this chapter is to elucidate the association between key destination components with the dimensions of a smart city to reveal the related smart tourism destination applications. Moreover, cultural heritage in smart tourism destinations forms an important part of tourism both with its tangible and intangible resources which have been involved in the emergent era of digitalization inevitably with all parties and processes. Hence, another aim of this chapter is to examine the dimensional shift in cultural heritage tourism within the framework of digitalization. Sharing cases of digitization of cultural heritage from different parts of the world, this chapter also reflects that it is inevitable to benefit from digitization and ICTs in order to reach the SDGs on the scale of smart tourism destinations. Analysis of academic publications and the national and international reports of the related authorities sums the methodology used to conclude the study with suggestions of future research paths to develop the field.

Implementing the 17 Sustainable Development Goals (SDGs) unarguably demands huge financial investments. However, the United Nations has acknowledged the huge financial gap militating against the implementation of the SDGs worldwide, leading experts to question the possibility of complete implementation of the goals by their terminal dateline of 2030. While the bulk of the finance currently outlaid on the SDGs comes from traditional sources including foreign direct investments (FDIs), there is the need to focus more attention on developing and exploiting impact investments that are more suitable for financing development programmes and projects. In this chapter, the SDG implementation profiles of the 12 Arab West Asia countries concerning the five most targeted SDGs were evaluated and sustainable finance issues were discussed. Secondary data were retrieved from World Bank's DataBank. The data were descriptively analyzed. Based on the profiles generated, debt relief is put forward as a possible impact investment mechanism suitable for funding the SDGs. Specifically, this chapter recommends that outright cancellation of debts based on the debt-for-SGD swap could serve as some of the impact investments needed to boost the global drive for a developed, peaceful, and just world.

This study aims to conduct a bibliometric analysis of sustainable tourism research published in Scopus-indexed journals covering the period from 1997 to 2021. Articles published during these 25 years were subjected to science mapping and performance analysis to propose potential areas for future research.

A bibliometric analysis using performance analysis and science mapping was conducted on 1,754 research papers retrieved from the Scopus database using the keyword “sustainable tourism.” Biblioshiny and VOSviewer are commonly used bibliometric tools. Science mapping techniques use coauthorship, keyword co-occurrence and co-citation analyses.

This study revealed the sustainable tourism publications’ spatial and temporal patterns, indicating a yearly growth rate of 19.9% during a 25-year period. The study identified Stefan Gossling as the most influential author, the “Journal of Sustainable Tourism” as the leading journal and Australia as the most productive country in sustainable tourism literature. The study used co-citation analysis to identify five thematic clusters, namely, reconceptualization and criticism, the role of residents, eco-labeling and the role of stakeholders, community-based tourism and the shift toward establishing sustainability indicators and effective governance and policymaking. The coauthorship analysis identifies the most influential author in collaborative efforts, and the most common pattern of collaboration is between researchers from different institutions in the same country, such as China and the Philippines, followed by collaborations between authors from other countries. The keyword co-occurrence analysis uncovered keywords that aligned with theme clusters generated from the co-citation analysis.

This study comprehensively uncovers five thematic clusters that have never been extracted so far in the literature. Also, it attempts to fill the gaps related to sustainable tourism by suggesting directions for future research.