Search results

The study aims to compare and analyze the impact of the commonly used pallets (wooden pallet and plastic pallets), using life cycle assessment (LCA), then provide certain suggestions for the development of green packaging.

In this study, software Simapro was used to calculate and analyze the whole life cycle of pallets from the stage of raw materials and production to processing and waste disposal.

A total of 12 environmental categories were used to quantitatively analyze the environmental impact of the four different pallets. The results showed that, regardless of raw material, processing, or waste stage, the environmental impact of wooden pallet was lower than that of plastic pallet. Wooden pallet was better than plastic pallets.

This study compared and analyzed the pallet of 1 × 1.2m with different materials.

Green packaging is the development trend of the future packaging, which follows the principle of 3R1D. According to the calculation results, corresponding suggestions can be put forward from production, processing, using, wasting and other aspects, and make corresponding contributions to the development of green packaging.

The contribution and impact of each stage of the product on the environment can be studied. The environmental impact, such as global warming potential, water scarcity, can be reduced through different solutions such as the use of green materials, good processing techniques and higher recycling rates.

Prior literature has widely established that the design of storage locations impacts order picking task performance. The purpose of this study is to investigate the performance impact of unit loads, e.g. pallets or rolling cages, utilized by pickers to pack products after picking them from storage locations.

An empirical analysis of archival data on a manual order picking system for deep-freeze products was performed in cooperation with a German brick-and-mortar retailer. The dataset comprises N = 343,259 storage location visits from 17 order pickers. The analysis was also supported by the development and the results of a batch assignment model that takes unit load selection into account.

The analysis reveals that unit load selection affects order picking task performance. Standardized rolling cages can decrease processing time by up to 8.42% compared to standardized isolated rolling boxes used in cold retail supply chains. Potential cost savings originating from optimal batch assignment range from 1.03% to 39.29%, depending on batch characteristics.

This study contributes to the literature on factors impacting order picking task performance, considering the characteristics of unit loads where products are packed on after they have been picked from the storage locations. In addition, it provides potential task performance improvements in cold retail supply chains.

This study aims to explore the critical application areas of radio frequency identification (RFID) technology for sustainable buildings.

The quantitative research approach was adopted through a structured questionnaire administered to relevant stakeholders of construction projects. The data collected were analysed with the exploratory factor analysis, relative importance index (RII) and fuzzy synthetic evaluation (FSE).

The study’s results have categorised the crucial areas of application where construction industry stakeholders should focus their attention. These areas are divided into four categories: management technologies, production technologies, sensing technologies and monitoring technologies. The findings from the FSE indicate that monitoring technologies represent the most significant category, whereas management technologies rank as the least significant. Moreover, the RII analysis highlights that tools management stands out as the most important application of RFID, while dispute resolution emerges as the least significant RFID application.

The study establishes the core areas of RFID application and their benefits to sustainable buildings. Consequently, it helps stakeholders (consultants, clients and contractors) to examine the RFID application areas and make informed decision on sustainable construction. Furthermore, it provides systematic proof that can aid the implementation of RFID in developing countries.

The study provides an insight into the possible application areas and benefits of RFID technology in the construction industry of developing countries. It also developed a conceptual frame for the critical application areas of RFID technology in the construction industry of developing countries.

Over the next decade, humanity is going to face big environmental problems, and considering these serious issues, businesses are adopting environmentally responsible practices. To put forward specific measures to achieve a more prosperous environmental future, this study aims to develop an environment-based perspective framework by integrating the Internet of Things (IoT) technology into a sustainable automotive supply chain (SASC).

The study presents a conceptual environmental framework – based on 29 factors constituting four stakeholders' rectifications – that holistically assess the SASC operations as part of the ReSOLVE model utilizing IoT. Then, experts from the SASC, IoT and sustainability areas participated in two rigorous rounds of a Delphi study to validate the framework.

The results indicate that the conceptual environmental framework proposed would help companies enhance the connectivity between major IoT tools in SASC, which would help develop congruent strategies for inducing sustainable growth.

This study adds value to existing knowledge on SASC sustainability and digitalization in the context where the SASC is under enormous pressure, competitiveness and increased variability.

As China’s e-commerce and cross-border e-commerce rapidly develop, the cross-border e-commerce supply chain exhibits characteristics of globalized development scale, collaborative multiparty participation, streamlined management processes, digitalized production and trade and flexible strategic choices. It tends toward data-driven intelligence, interoperable information collaboration, personalized order responses, sustainable supply chain management and secure blockchain technology. These characteristics and trends provide critical references for businesses, governments and investors.

In response to issues such as inconsistent legal regulations, imbalanced logistics and transportation, imperfect payment settlements and opaque supply chains.

It is recommended to take measures to strengthen cooperation and communication, optimize logistics, reduce customs clearance difficulties, reinforce safeguard measures and promote sustainable development, collectively fostering the healthy growth of cross-border e-commerce.

With the rapid development of cross-border e-commerce, green and low-carbon initiatives have become a significant trend in this sector. The cross-border e-commerce supply chain refers to the mechanism that reduces environmental impacts and enhances resource efficiency from manufacturers to consumers. It primarily involves manufacturers, e-commerce platforms, logistics companies and payment and settlement processes. The cross-border e-commerce supply chain is gradually becoming a highlight in China’s foreign trade, supporting the concept of “buying globally and selling globally” and connecting the “world’s factory” with the “world’s market.”

This study aims to the perceptions of the administration of Greek universities on sustainable development and the role of the administration in the implementation of corresponding practices. Specifically, it examines management’s perception and contribution to sustainable development and assesses the sustainability initiatives taking place in universities and the factors that influence their implementation. The obstacles and motivations in the implementation of these actions are also investigated.

For the empirical analysis, a survey was conducted during the period March–June 2022, addressing questionnaires to 12 rectors or vice rectors dealing with the sustainability of the respective 12 Greek universities. Secondary data about their sustainability practices were also collected from the institutions’ official Web pages.

The results show that management’s perception of sustainable development mainly concerns the conservation of resources for future generations and the balancing of the economy. Moreover, the findings indicate that universities play a significant role in achieving sustainability by contributing to the educational process, conducting research and serving as a model of sustainability for both the educational community and society as a whole. Financial and institutional barriers are characterized as the most important obstacles for adopting sustainability practices. The most popular motives to promote sustainability issues are financial support of universities, in addition to the governmental support of the leadership and, in particular, of the rectorate authorities.

To the best of the authors’ knowledge, this study is the first conducted among the Greek universities that focuses on administration’s viewpoint and contributes to the international dialogue on the implementation of sustainability by higher education institutions. The results provide preliminary evidence of top management responses to endorse sustainability activities at the higher education institutes in the broader area of Eastern Europe.

The digital warehouse management system is an emergence that forms a critical part of the transformation of economic structure in Industry 4.0. In the present business scenario, the warehouse management system encounters a messy layout, poor damage control, unsatisfactory order management, lack of visibility and lack of technological interventions. Digital twin (DT) based warehouse system shows the ontology and knowledge graphs for competitive advantage by consolidating and transferring goods directly from an inbound supplier to an outbound customer on short notice and with no or limited storage. There remains a lack of clarity on how the DT can be implemented successfully in warehouse management.

The current literature remains largely unstructured and scattered due to a lack of a systematic approach to integrating the research implications and analysis. This paper probes the conceptualization of the DT with the help of theoretical analysis using the systematic literature analysis method.

The study explores essential concepts such as interoperability and integrability in implementing DT. Further, it analyzes the role of a supply chain control tower (SCCT) in modern supply chain management. A research framework is proposed for practitioners and academicians by incorporating the opportunities and challenges associated with DT implementation. The research findings are mainly threefold: Conceptualization of DT, Featuring SCCT and Exploration of cross-computer platform interfaces, scalability and maintenance strategies.

This study is among the first to analyze and review DT applications in warehouse management. Moreover, the study proposes a theoretical toolbox for the practitioners to successfully implement the DT in warehouse DT-based warehouse management system: A theoretical toolbox for future research and applications.

In recent years, technology diffusion, globalization and the Internet revolution have accelerated the growth of online transactions and altered corporate operations systems. The emergence of computer technology and the Internet have changed the way businesses work. The purpose of this study is to find and identify any common patterns in the logistics and supply chain industries for job requirements using job posting content in Malaysia.

This study provides an exploratory assessment of the employability skill set required using online job posting advertisements. Online job posting advertising, also known as e-recruiting, is one field that has been significantly influenced by information technology. In addition, the current Covid-19 outbreak has created a new need for a long-term contactless talent acquisition process in the organization's operating systems.

Based on this study's findings, the top ten skills required by employers for logistics and supply chain positions are (1) supply chain analytics, (2) technological aptitude, (3) teamwork skills, (4) customer focus, (5) leadership skills, (6) interpersonal skills, (7) people skills, (8) creativity and resilience, (9) demand and supply forecasting ability, and (10) project management skills. Overall, the findings provide a road map for practitioners and academics interested in developing supply chain managers' necessary skills and competencies to manage current and future supply networks. It also allows companies to adjust their supply chain management hiring, training and retention methods.

Although the study was done in Malaysia, the supply chain skills and competencies stated in this study, as well as their categorization, can be applied in other developing countries.

This research paper aims to analyze the scientific and grey literature on Quality 4.0 and zero-defect manufacturing (ZDM) frameworks to develop an integrated quality 4.0 framework (IQ4.0F) for quality improvement (QI) based on Six Sigma and machine learning (ML) techniques towards ZDM. The IQ4.0F aims to contribute to the advancement of defect prediction approaches in diverse manufacturing processes. Furthermore, the work enables a comprehensive analysis of process variables influencing product quality with emphasis on the use of supervised and unsupervised ML techniques in Six Sigma’s DMAIC (Define, Measure, Analyze, Improve and Control) cycle stage of “Analyze.”

The research methodology employed a systematic literature review (SLR) based on PRISMA guidelines to develop the integrated framework, followed by a real industrial case study set in the automotive industry to fulfill the objectives of verifying and validating the proposed IQ4.0F with primary data.

This research work demonstrates the value of a “stepwise framework” to facilitate a shift from conventional quality management systems (QMSs) to QMSs 4.0. It uses the IDEF0 modeling methodology and Six Sigma’s DMAIC cycle to structure the steps to be followed to adopt the Quality 4.0 paradigm for QI. It also proves the worth of integrating Six Sigma and ML techniques into the “Analyze” stage of the DMAIC cycle for improving defect prediction in manufacturing processes and supporting problem-solving activities for quality managers.

This research paper introduces a first-of-its-kind Quality 4.0 framework – the IQ4.0F. Each step of the IQ4.0F was verified and validated in an original industrial case study set in the automotive industry. It is the first Quality 4.0 framework, according to the SLR conducted, to utilize the principal component analysis technique as a substitute for “Screening Design” in the Design of Experiments phase and K-means clustering technique for multivariable analysis, identifying process parameters that significantly impact product quality. The proposed IQ4.0F not only empowers decision-makers with the knowledge to launch a Quality 4.0 initiative but also provides quality managers with a systematic problem-solving methodology for quality improvement.

To maximize the network total profit by calculating the difference between costs and revenue (first objective function). To maximize the positive impact on the environment by integrating GSCM factors in RL (second objective function). To calculate the efficiency of disassembly centers by SDEA method, which are selected as suppliers and maximize the total efficiency (third objective function). To evaluate the resources and total efficiency of the proposed model to facilitate the allocation resource process, to increase resource efficiency and to improve the efficiency of disassembly centers by Inverse DEA.

The design of a closed-loop logistics network for after-sales service for mobile phones and digital cameras has been developed by the mixed-integer linear programming method (MILP). Development of MILP method has been performed by simultaneously considering three main objectives including: total network profit, green supply chain factors (environmental sustainability) and maximizing the efficiency of disassembly centers. The proposed model of study is a six-level, multi-objective, single-period and multi-product that focuses on electrical waste. The efficiency of product return centers is calculated by SDEA method and the most efficient centers are selected.

The results of using the model in a case mining showed that, due to the use of green factors in network design, environmental pollution and undesirable disposal of some electronic waste were reduced. Also, with the reduction of waste disposal, valuable materials entered the market cycle and the network profit increased.

(1) Design a closed-loop reverse logistics network for after-sales services; (2) Introduce a multi-objective multi-echelon mixed integer linear programming model; (3) Sensitivity analysis use Inverse-DEA method to increase the efficiency of inefficient units; (4) Use the GSC factors and DEA method in reverse logistics network.