Search results

This study aims to propose a computationally efficient framework for multi-objective optimization (MO) of antennas involving nested kriging modeling technology. The technique is demonstrated through a two-objective optimization of a planar Yagi antenna and three-objective design of a compact wideband antenna.

The keystone of the proposed approach is the usage of recently introduced nested kriging modeling for identifying the design space region containing the Pareto front and constructing fast surrogate model for the MO algorithm. Surrogate-assisted design refinement is applied to improve the accuracy of Pareto set determination. Consequently, the Pareto set is obtained cost-efficiently, even though the optimization process uses solely high-fidelity electromagnetic (EM) analysis.

The optimization cost is dramatically reduced for the proposed framework as compared to other state-of-the-art frameworks. The initial Pareto set is identified more precisely (its span is wider and of better quality), which is a result of a considerably smaller domain of the nested kriging model and better predictive power of the surrogate.

The proposed technique can be generalized to accommodate low- and high-fidelity EM simulations in a straightforward manner. The future work will incorporate variable-fidelity simulations to further reduce the cost of the training data acquisition.

The fast MO optimization procedure with the use of the nested kriging modeling technology for approximation of the Pareto set has been proposed and its superiority over state-of-the-art surrogate-assisted procedures has been proved. To the best of the authors’ knowledge, this approach to multi-objective antenna optimization is novel and enables obtaining optimal designs cost-effectively even in relatively high-dimensional spaces (considering typical antenna design setups) within wide parameter ranges.

The purpose of this paper is to investigate strategies for expedited dimension scaling of electromagnetic (EM)-simulated microwave and antenna structures, exploiting the concept of variable-fidelity inverse surrogate modeling.

A fast inverse surrogate modeling technique is described for dimension scaling of microwave and antenna structures. The model is established using reference designs obtained for cheap underlying low-fidelity model and corrected to allow structure scaling at high accuracy level. Numerical and experimental case studies are provided demonstrating feasibility of the proposed approach.

It is possible, by appropriate combination of surrogate modeling techniques, to establish an inverse model for explicit determination of geometry dimensions of the structure at hand so as to re-design it for various operating frequencies. The scaling process can be concluded at a low computational cost corresponding to just a few evaluations of the high-fidelity computational model of the structure.

The present study is a step toward development of procedures for rapid dimension scaling of microwave and antenna structures at high-fidelity EM-simulation accuracy.

The proposed modeling framework proved useful for fast geometry scaling of microwave and antenna structures, which is very laborious when using conventional methods. To the authors’ knowledge, this is one of the first attempts to surrogate-assisted dimension scaling of microwave components at the EM-simulation level.

Strategies for accelerated multi-objective optimization of aerodynamic surfaces are investigated, including the possibility of exploiting surrogate modeling techniques for computational fluid dynamic (CFD)-driven design speedup of such surfaces. The purpose of this paper is to reduce the overall optimization time.

An algorithmic framework is described that is composed of: a search space reduction, fast surrogate models constructed using variable-fidelity CFD models and co-Kriging, and Pareto front refinement. Numerical case studies are provided demonstrating the feasibility of solving real-world problems involving multi-objective optimization of transonic airfoil shapes and accurate CFD simulation models of such surfaces.

It is possible, through appropriate combination of surrogate modeling techniques and variable-fidelity models, to identify a set of alternative designs representing the best possible trade-offs between conflicting design objectives in a realistic time frame corresponding to a few dozen of high-fidelity CFD simulations of the respective surfaces.

The proposed aerodynamic design optimization algorithmic framework is novel and holistic. It proved useful for fast design of aerodynamic surfaces using high-fidelity simulation data in moderately sized search space, which is extremely challenging when using conventional methods due to the excessive computational cost.

This paper aims to investigate deterministic strategies for low-cost multi-objective design optimization of compact microwave structures, specifically, impedance matching transformers. The considered methods involve surrogate modeling techniques and variable-fidelity electromagnetic (EM) simulations. In contrary to majority of conventional approaches, they do not rely on population-based metaheuristics, which permit lowering the design cost and improve reliability.

There are two algorithmic frameworks presented, both fully deterministic. The first algorithm involves creating a path covering the Pareto front and arranged as a sequence of patches relocated in the course of optimization. Response correction techniques are used to find the Pareto front representation at the high-fidelity EM simulation level. The second algorithm exploits Pareto front exploration where subsequent Pareto-optimal designs are obtained by moving along the front by means of solving appropriately defined local constrained optimization problems. Numerical case studies are provided demonstrating feasibility of solving real-world problems involving expensive EM-simulation models of impedance transformer structures.

It is possible, by means of combining surrogate modeling techniques and constrained local optimization, to identify the set of alternative designs representing Pareto-optimal solutions, in a realistic time frame corresponding to a few dozen of high-fidelity EM simulations of the respective structures. Multi-objective optimization for the considered class of structures can be realized using deterministic approaches without defaulting to evolutionary methods.

The present study can be considered a step toward further studies on expedited optimization of computationally expensive simulation models for miniaturized microwave components.

The proposed algorithmic solutions proved useful for expedited multi-objective design optimization of miniaturized microwave structures. The problem is extremely challenging when using conventional methods, in particular evolutionary algorithms. To the authors’ knowledge, this is one of the first attempts to investigate deterministic surrogate-assisted multi-objective optimization of compact components at the EM-simulation level.

Strategies for accelerated multi-objective optimization of compact microwave and RF structures are investigated, including the possibility of exploiting surrogate modeling techniques for electromagnetic (EM)-driven design speedup for such components. The paper aims to discuss these issues.

Two algorithmic frameworks are described that are based on fast response surface approximation models, structure decomposition, and Pareto front refinement. Numerical case studies are provided demonstrating feasibility of solving real-world problems involving multi-objective optimization of miniaturized microwave passives and expensive EM-simulation models of such structures.

It is possible, through appropriate combination of the surrogate modeling techniques and response correction methods, to identify the set of alternative designs representing the best possible trade-offs between conflicting design objectives in a realistic time frame corresponding to a few dozen of high-fidelity EM simulations of the respective structures.

The present study sets a direction for further studied on expedited optimization of computationally expensive simulation models for miniaturized microwave components.

The proposed algorithmic framework proved useful for fast design of microwave structures, which is extremely challenging when using conventional methods. To the authors’ knowledge, this is one of the first attempts to surrogate-assisted multi-objective optimization of compact components at the EM-simulation level.

The purpose of this paper is to investigate the strategies and algorithms for expedited design optimization of microwave and antenna structures in multi-objective setup.

Formulation of the multi-objective design problem-oriented toward execution of the population-based metaheuristic algorithm within the segmented search space is investigated. Described algorithmic framework exploits variable fidelity modeling, physics- and approximation-based representation of the structure and model correction techniques. The considered approach is suitable for handling various problems pertinent to the design of microwave and antenna structures. Numerical case studies are provided demonstrating the feasibility of the segmentation-based framework for the design of real-world structures in setups with two and three objectives.

Formulation of appropriate design problem enables identification of the search space region containing Pareto front, which can be further divided into a set of compartments characterized by small combined volume. Approximation model of each segment can be constructed using a small number of training samples and then optimized, at a negligible computational cost, using population-based metaheuristics. Introduction of segmentation mechanism to multi-objective design framework is important to facilitate low-cost optimization of many-parameter structures represented by numerically expensive computational models. Further reduction of the design cost can be achieved by enforcing equal-volumes of the search space segments.

The study summarizes recent advances in low-cost multi-objective design of microwave and antenna structures. The investigated techniques exceed capabilities of conventional design approaches involving direct evaluation of physics-based models for determination of trade-offs between the design objectives, particularly in terms of reliability and reduction of the computational cost. Studies on the scalability of segmentation mechanism indicate that computational benefits of the approach decrease with the number of search space segments.

The proposed design framework proved useful for the rapid multi-objective design of microwave and antenna structures characterized by complex and multi-parameter topologies, which is extremely challenging when using conventional methods driven by population-based metaheuristics algorithms. To the authors knowledge, this is the first work that summarizes segmentation-based approaches to multi-objective optimization of microwave and antenna components.

The purpose of this paper is to investigate the mechanical properties’ behaviors of woven composite cut-out structures with specific parameters. Because of the complexity of micro-scale and meso-scale structure, it is difficult to accurately predict the mechanical material behavior of woven composites. Numerical simulations are increasingly necessary for the design and optimization of test procedures for composite structures made by the woven composite. The results of the proposed method are well satisfied with the results obtained from the experiment and other studies. Moreover, parametric studies on different plates based on the stacking sequences are investigated.

A multi-scale modeling approach is suggested. Back-propagation neural networks (BPNN), radial basis function (RBF) and least square support vector regression are integrated with efficient global optimization (EGO) to reduce the weight of assigned structure. Optimization results are verified by finite element analysis.

Compared with other similar studies, the advantage of the suggested strategy uses homogenized properties behaviors with more complex analysis of woven composite structures. According to investigation results, it can be found that 450/−450 ply-orientation is the best buckling load value for all the cut-out shape requirements. According to the optimal results, the BPNN-EGO is the best candidate for the EGO to optimize the woven composite structures.

A multi-scale approach is used to investigate the mechanical properties of a complex woven composite material architecture. Buckling of different cut-out shapes with the same area is surveyed. According to investigation, 45°/−45° ply-orientation is the best for all cut-out shapes. Different surrogate models are integrated in EGO for optimization. The BPNN surrogate model is the best choice for EGO to optimization difficult problems of woven composite materials.

The conventional design method relies on a priori knowledge, which limits the rapid and efficient development of electronic packaging structures. The purpose of this study is to propose a hybrid method of data-driven inverse design, which couples adaptive surrogate model technology with optimization algorithm to to enable an efficient and accurate inverse design of electronic packaging structures.

The multisurrogate accumulative local error-based ensemble forward prediction model is proposed to predict the performance properties of the packaging structure. As the forward prediction model is adaptive, it can identify respond to sensitive regions of design space and sample more design points in those regions, getting the trade-off between accuracy and computation resources. In addition, the forward prediction model uses the average ensemble method to mitigate the accuracy degradation caused by poor individual surrogate performance. The Particle Swarm Optimization algorithm is then coupled with the forward prediction model for the inverse design of the electronic packaging structure.

Benchmark testing demonstrated the superior approximate performance of the proposed ensemble model. Two engineering cases have shown that using the proposed method for inverse design has significant computational savings while ensuring design accuracy. In addition, the proposed method is capable of outputting multiple structure parameters according to the expected performance and can design the packaging structure based on its extreme performance.

Because of its data-driven nature, the inverse design method proposed also has potential applications in other scientific fields related to optimization and inverse design.

Global sensitivity analysis (SA) by means of Sobol’ indices enhanced with different surrogate modeling techniques is performed in this work. The purpose is to investigate the influence of measurement uncertainties and the environment characteristics themselves on the desired field uniformity in reverberation chambers (RCs). This yields an efficient apparatus for the stirring and chamber design process.

The technique of Sobol’ indices, as a candidate of global SA methods, is suitable for high fluctuations due to its robustness, which can be addressed to the stochastic nature of the RC environment. The aim of using surrogate modeling techniques is to compute the indices efficiently with a moderate number of required simulations. The powerfulness of this approach is introduced in a simple numerical example in which the physical phenomena can be identified more straightforwardly.

This method can provide useful knowledge in the lower frequency range, where the ideal properties of the electromagnetic field in RCs cannot be established, and the importance of the setup parameters can vary from configuration to configuration. In addition, it can serve as a basis for setup adaptation during parallelized electromagnetic compatibility tests, which would result in a more time- and cost-saving option in industrial applications in the future.

Despite the previous attempts, a profound investigation of multiple setup parameters is still a hot topic. The main contribution of this work is the extension of the application area of the method of Sobol’ indices to RCs, which has not been done so far.

The purpose of this paper is to present a low evaluation budget optimization strategy for expensive simulation models, such as 3D finite element models.

A 3D finite element electromagnetic model and a thermal model are developed and coupled in order to simulate the linear induction motor (LIM) to be conceived. Using the 3D finite element coupling model as a simulation model, a multi‐objective optimization with a progressive improvement of a surrogate model is proposed. The proposed surrogate model is progressively improved using an infill set selection strategy which is well‐suited for the parallel evaluation of the 3D finite element coupling model on an eight‐core machine, with a maximum of four models running in parallel.

The proposed strategy allows for a significant gain of optimization time. The 3D Pareto front composed of the finite element model evaluation results is obtained, which provides the designer with a set of optimal trade‐off solutions for him/her to make the final decision for the engineering design.

An infill set selection strategy is proposed, which allows the parallel evaluation of the finite element model, and at the same time guides the progressive construction of an improved surrogate model during the multi‐objective optimization run. The paper may stand as a good reference for researchers/engineering designers who have to deal with optimal design problems implying costly simulation models.