Search results

This review paper seeks to enhance knowledge of how pre-loading affects reinforced concrete (RC) beams under fire. It investigates key factors like deflection and load capacity to understand pre-loading's role in replicating RC beams' actual responses to fire, aiming to improve fire testing protocols and structural fire engineering design.

This review systematically aggregates data from existing literature on the fire response of RC beams, comparing scenarios with (WP) and without pre-loading (WOP). Through statistical tools like the two-tailed t-test and Mann–Whitney U-test, it assesses deflection extremes. The study further examines structural responses, including flexural and shear behavior, ultimate load capacity, post-yield behavior, stiffness degradation and failure modes. The approach concludes with a statistical forecast of ideal pre-load levels to elevate experimental precision and enhance fire safety standards.

The review concludes that pre-loading profoundly affects the fire response of RC beams, suggesting a 35%–65% structural capacity range for realistic simulations. The review also recommended the initial crack load as an alternative metric for determining the pre-loading impact. Crucially, it highlights that pre-loading not only influences the fire response but also significantly alters the overall structural behavior of the RC beams.

The review advances structural fire engineering with an in-depth analysis of pre-loading's impact on RC beams during fire exposure, establishing a validated pre-load range through thorough statistical analysis and examination of previous research. It refines experimental methodologies and structural design accuracy, ultimately bolstering fire safety protocols.

A quantitative theoretical model is proposed to measure how productivity performance can be affected by strategic decisions related to specific competitive priorities.

This study proposes the Primary Transformation Model (PTM) and an equation to measure cause-and-effect relationships between productivity and competitive priorities.

The interdependence between productivity and competitive priorities was studied using the PTM and the proposed model indicates that strategies that improve external performance also impact internal productivity. It was also observed that the compatibility between competitive priorities depends on the initial manufacturing conditions and the implementation method adopted.

The proposed model is theoretical and, as such, is an abstraction of reality and does not consider all possible aspects. It consists of a novel approach that still requires further empirical testing. The PTM provides insights about the trade-offs between productivity and strategic objectives, as well, contributes to the ongoing research on manufacturing strategy and can be further developed in future studies.

The main practical implication is to allow companies to relate their strategic decisions to their productivity performance.

This research also contributes to societal issues by enabling firms to better align strategic objectives and operations, which ultimately allows offering products more suited to the needs of customers, thus making better use of the required resources and favoring economic growth.

The model proposed allows objective assessment of actions aiming at operational efficiency and effectiveness, in addition to providing insights into cause-and-effect relationships between productivity and competitive priorities. The model can also be used in empirical investigations on manufacturing strategy.

Cloud computing services gained huge attention in recent years and many organizations started moving their business data traditional server to the cloud storage providers. However, increased data storage introduces challenges like inefficient usage of resources in the cloud storage, in order to meet the demands of users and maintain the service level agreement with the clients, the cloud server has to allocate the physical machine to the virtual machines as requested, but the random resource allocations procedures lead to inefficient utilization of resources.

This thesis focuses on resource allocation for reasonable utilization of resources. The overall framework comprises of cloudlets, broker, cloud information system, virtual machines, virtual machine manager, and data center. Existing first fit and best fit algorithms consider the minimization of the number of bins but do not consider leftover bins.

The proposed algorithm effectively utilizes the resources compared to first, best and worst fit algorithms. The effect of this utilization efficiency can be seen in metrics where central processing unit (CPU), bandwidth (BW), random access memory (RAM) and power consumption outperformed very well than other algorithms by saving 15 kHz of CPU, 92.6kbps of BW, 6GB of RAM and saved 3kW of power compared to first and best fit algorithms.

The proposed multi-objective bin packing algorithm is better for packing VMs on physical servers in order to better utilize different parameters such as memory availability, CPU speed, power and bandwidth availability in the physical machine.

The purpose of this paper is to examine the mechanical characteristics and optimization of wear parameters of hybrid (TiO₂ + Y₂O₃) nanoparticles with Al matrix using squeeze casting technique.

The hybrid aluminium matrix nanocomposites (HAMNCs) were fabricated with varying concentrations of titanium oxide (TiO₂) and yttrium oxide (Y₂O₃), from 2.5 to 10 Wt.% in 2.5 Wt.% increments. Dry sliding wear test variables were optimized using the Taguchi method.

The introduction of hybrid nanoparticles in the aluminium (Al) matrix was evenly distributed in contrast to the base matrix. HAMNC6 (5 Wt.% TiO₂ + 5 Wt.% Y₂O₃) reported the maximum enhancement in mechanical properties (tensile strength, flexural strength, impact strength and density) and decrease in porosity% and elongation% among other HAMNCs. The results showed that the optimal combination of parameters to achieve the lowest wear rate was A3B3C1, or 15 N load, 1.5 m/s sliding velocity and 200 m sliding distance. The sliding distance showed the greatest effect on the dry sliding wear rate of HAMNC6 followed by applied load and sliding velocity. The fractured surfaces of the tensile sample showed traces of cracking as well as substantial craters with fine dimples and the wear worn surfaces were caused by abrasion, cracks and delamination of HAMNC6.

Squeeze-cast Al-reinforced hybrid (TiO₂+Y₂O₃) nanoparticles have been investigated for their impact on mechanical properties and optimization of wear parameters.

The purpose of this study is to understand the investment decision-making of real estate investors in housing, highlighting the interplay between rational and irrational factors. In this study, investment satisfaction was a mediator, while reinvestment intention was the dependent variable.

A quantitative, cross-sectional and descriptive research design was used, gathering data from a sample of 550 residential real estate investors using a multi-stage stratified sampling technique. The partial least squares structural equation modelling disjoint two-stage approach was used for data analysis. This methodological approach allowed for an in-depth examination of the relationship between rational factors such as location, profitability, financial viability, environmental considerations and legal aspects alongside irrational factors including various biases like overconfidence, availability, anchoring, representative and information cascade.

This study strongly supports the adaptive market hypothesis, showing that residential real estate investor behaviour is dynamic, combining rational and irrational elements influenced by evolutionary psychology. This challenges traditional views of investment decision-making. It also establishes that behavioural biases, key to adapting to market changes, are crucial in shaping residential property market efficiency. Essentially, the study uncovers an evolving real estate investment landscape driven by evolutionary behavioural patterns.

This research redefines rationality in behavioural finance by illustrating psychological biases as adaptive tools within the residential property market, urging a holistic integration of these insights into real estate investment theories.

The study reshapes property valuation models by blending economic and psychological perspectives, enhancing investor understanding and market efficiency. These interdisciplinary insights offer a blueprint for improved regulatory policies, investor education and targeted real estate marketing, fundamentally transforming the sector’s dynamics.

Unlike previous studies, the research uniquely integrates human cognitive behaviour theories from psychology and business studies, specifically in the context of residential property investment. This interdisciplinary approach offers a more nuanced understanding of investor behaviour.

To generate electricity, solar photovoltaic (PV) systems are among the best, most eco-friendly and most cost-effective solutions available. Extraction of maximum possible electricity from the solar PV system is complicated by a number of factors brought on by the ever-changing weather conditions under which it must operate. Many conventional and evolutionary algorithm-based maximum power point tracking (MPPT) techniques have the limitation of not being able to extract maximum power under partial shade and rapidly varying irradiance. Hence, the purpose of this paper is to propose a novel hybrid slime mould assisted with perturb and observe (P&O) global MPPT technique (HSMO) for the hybrid bridge link-honey comb (BL-HC) configured PV system to enhance the better maximum power during dynamic and steady state operations within less time.

In this method, a hybridization of two algorithms is proposed to track the true with faster convergence under PSCs. Initially, the slime mould optimization (SMO) algorithm is initiated for exploration of optimum duty cycles and later P&O algorithm is initiated for exploitation of global duty cycle for the DC–DC converter to operate at GMPP and for fast convergence.

The effectiveness of the proposed HSMO MPPT is compared with adaptive coefficient particle swarm optimization (ACPSO), flower pollination algorithm and SMO MPPT techniques in terms of tracked GMPP, convergence time/tracking speed and efficacy under six complex partial shading conditions. From the results, it is noticed that the proposed algorithm tracks the true GMPP under most of the shading conditions with less tracking time when compared to other MPPT techniques.

This paper proposes a novel hybrid slime mould assisted with perturb and observe (P&O) global MPPT technique (HSMO) for the hybrid BL-HC configured PV system enhance the better maximum power under partial shading conditions (PSCs). This method operated in two stages as SMO for exploration and P&O for exploitation for faster convergence and to track true GMPP under PSCs. The proposed approach largely improves the performance of the MPP tracking of the PV systems. Initially, the proposed MPPT technique is simulated in MATLAB/Simulink environment. Furthermore, an experimental setup has been designed and implemented. Simulation results obtained are validated through experimental results which prove the viability of the proposed technique for an efficient green energy solution.

The criteria importance through intercriteria correlation (CRITIC) and range of value (ROV) combined methods were used to determine a single index for all multiple responses.

This paper used cold metal transfer (CMT) and pulse metal-inert gas (MIG) welding processes to study the weld-on-bead geometry of AA2099-T86 alloy. This study used Taguchi's approach to find the optimal setting of the input welding parameters. The welding current, welding speed and contact-tip-to workpiece distance were the input welding parameters for finding the output responses, i.e. weld penetration, dilution and heat input. The L9 orthogonal array of Taguchi's approach was used to find out the optimal setting of the input parameters.

The optimal input welding parameters were determined with combined output responses. The predicted optimum welding input parameters were validated through confirmation tests. Analysis of variance showed that welding speed is the most influential factor in determining the weld bead geometry of the CMT and pulse MIG welding techniques.

The heat input and weld bead geometry are compared in both welding processes. The CMT welding samples show superior defect-free weld beads than pulse MIG welding due to lesser heat input and lesser dilution.

Climate change-related weather events significantly affect rice production. In this paper, we investigate the impact of and interrelationships between agriculture inputs, climate change factors and financial variables on rice production in India from 1970–2021.

This study is based on the time series analysis; the unit root test has been employed to unveil the integration order. Further, the study used various econometric techniques, including vector autoregression estimates (VAR), cointegration test, autoregressive distributed lag (ARDL) model and diagnostic test for ARDL, fully modified least squares (FMOLS), canonical cointegrating regression (CCR), impulse response functions (IRF) and the variance decomposition method (VDM) to validate the long- and short-term impacts of climate change on rice production in India of the scrutinized variables.

The study's findings revealed that the rice area, precipitation and maximum temperature have a significant and positive impact on rice production in the short run. In the long run, rice area (ß = 1.162), pesticide consumption (ß = 0.089) and domestic credit to private sector (ß = 0.068) have a positive and significant impact on rice production. The results show that minimum temperature and direct institutional credit for agriculture have a significant but negative impact on rice production in the short run. Minimum temperature, pesticide consumption, domestic credit to the private sector and direct institutional credit for agriculture have a negative and significant impact on rice production in the long run.

The present study makes valuable and original contributions to the literature by examining the short- and long-term impacts of climate change on rice production in India over 1970–2021. To the best of the authors’ knowledge, The majority of the studies examined the impact of climate change on rice production with the consideration of only “mean temperature” as one of the climatic variables, while in the present study, the authors have considered both minimum as well as maximum temperature. Furthermore, the authors also considered the financial variables in the model.

This study aims to explore the mediating role of digital technologies-based supply chain integrating (SCI) strategies on the agri-supply chain performance (SCP) and firm performance (FP). This research has introduced recently emerged digital technologies such as Internet of Things (IoT). Further, based on theoretical support and an extensive literature review, this research has proposed some hypotheses, which have been quantitatively validated for their significance.

A conceptual model was formulated based on an extensive literature review. Data for this research were gathered from a survey completed by 119 respondents from different departments of agri-firms. Further, partial least square (PLS)-based structured equation modelling (SEM) was used to test the proposed hypothetical model.

The results confirm that IoT-based digital technologies and supply chain processes (organization integration [OI], information sharing and customer integration [CI]) have a significant positive correlation. Furthermore, supply chain practices are positively associated with SCP. Finally, it has been found that FP is positively impacted by SCP.

This research is used to analyse the mediating impacts of digital supply chain processes as a linking strategy for SCP and FP. For practical purposes, this research provides investment decisions for implementing digital technologies in SC strategies. The findings have proposed implications for managers and practitioners in agri-firms based on existing theories: contingency theory (CT) and relational view theory. Also, this study suggests the deployment of smarter electronically based tags and readers, which improve the data analytics capabilities based on auto-captured data. Thus, the availability of quality information improves the data-driven decisional capabilities of managers at company level.

This is a unique and original study exploring the relationship between digitalization, resilient agri-food supply chain (AFSC) management practices and firm performance. This research may be extended to other industries in view of the results from SCP and impact of digitalization.

This paper aims to “identify,” “analyse” and “categorise” the readiness factors of lean sustainability in health-care organisation using total interpretive structural modelling (TISM).

To obtain the data, a closed-ended questionnaire was used in addition to a scheduled interview. To identify how the factors interact, the TISM approach was used, and the matriced’ impacts croise’s multiplication applique’e a UN classement (MICMAC) analysis was used to rank and categorise the lean sustainability readiness factors.

This study identified ten lean sustainability readiness factors for health-care organisation. The identified factors are resources utilization practice (F1), management commitment and leadership (F2), operational flexibility (F3), workforce engagement and time commitment (F4), sustainability motivational factors (F5), awareness of lean and sustainable practice (F6), hospital design (F7), energy efficiency practices in hospitals (F8), responsible autonomy (F9) and new system adoptability training (F10). The key/driving factors are identified in this study are operational flexibility, sustainability motivational factors, management commitment and leadership, new system adoptability training.

The study focussed primarily on lean sustainability factors for the health-care sector.

This research will aid key stakeholders and academics in the better understanding the readiness factors that influence lean sustainability in health-care organisation. This study emphasises the factors that must be considered when applying lean sustainable practices in health care as a real-world application in a health-care organisation. These readiness factors for lean sustainability can be used by an organization to comprehend more about the concept and the components that contribute to health-care lean sustainability.

This study proposes the TISM technique for health care, which is a novel attempt in the subject of lean sustainability in this sector.