Search results

This paper aims to propose a diverless weld bead maintenance welding technology to prevent the leakage of subsea oil and gas pipeline and solve the key problems in the maintenance of subsea pipeline.

Based on the analysis of the cross-section of the fillet weld, the multi-layer and multi-pass welding path planning of the submarine pipeline sleeve fillet weld is studied, and thus a multi-layer and multi-pass welding path planning strategy is proposed. A welding seam filling method is designed, and the end position of the welding gun is planned, which provides a theoretical basis for the motion control of the maintenance system.

The trajectory planning and adjustment of multi-layer and multi-pass fillet welding and the motion stability control of the rotating mechanism are realized.

It provides the basis for the prototype design of the submarine pipeline maintenance and welding robot system, and also lays the foundation for the in-depth research on the intelligent maintenance system of submarine pipeline.

The maintenance of diverless subsea pipeline is a new type of maintenance method, which can solve the problem of large amount of subsea maintenance work with high efficiency.

The purpose of this paper is to identify and discuss maintenance challenges and maintenance practices for subsea petroleum production systems.

Maintenance challenges, current practices and factors that influence the maintenance and support practices were identified by a literature review and by using a case study conducted in the Norwegian oil and gas industry. The case study was based on semi‐structured face‐to‐face interviews with a number of experts working in the subsea systems’ design, installation and support services in the Norwegian oil and gas industry.

The paper identifies and discusses subsea petroleum production system failures, maintenance, inspection, modification and support practices. Findings from literature are validated, and new challenges are identified and discussed.

The research is based on a case study in the Norwegian petroleum industry, but may be applicable in other countries as well. The subsea production systems are critical production systems, and failures may result in long downtime and costly maintenance, inspection and support services. Hence, inspection, maintenance and modification intervention support services requires careful project planning, implementation and execution, taking into account all influencing factors.

The identified challenges can be used by decision makers in offshore maintenance projects.

The purpose of this paper is to identify and discuss various factors that will influence the process of installing and maintaining subsea equipment in the oil and gas (O&G) industry.

Influencing factors and their attributes are identified using a case study on subsea installations conducted in the Norwegian O&G industry. A number of experts were interviewed. A survey was conducted to rank the importance of the influence factors.

The paper identifies, analyzes and validates the factors and attributes that may impact the installation and maintenance strategy of subsea components. The factors are ranked according to importance and as practiced in the industry.

The research is based on a case study in the Norwegian O&G industry, but the approach and results could be adapted to other industries as well.

The identified factors can be used by decision makers in the development of offshore projects.

The purpose of this paper is to focus on developing a knowledge-based engineering (KBE) approach to recycle the knowledge accrued in an industrial organization for the mitigation of unwanted events due to human error. The recycling of the accrued knowledge is vital in mitigating the variance present at different levels of engineering applications, evaluations and assessments in assuring systems’ safety. The approach is illustrated in relation to subsea systems’ functional failure risk (FFR) analysis.

A fuzzy expert system (FES)-based approach has been proposed to facilitate FFR assessment and to make knowledge recycling possible via a rule base and membership functions (MFs). The MFs have been developed based on the experts’ knowledge, data, information, and on their insights into the selected subsea system. The rule base has been developed to fulfill requirements and guidelines specified in DNV standard DNV-RP-F116 and NORSOK standard Z-008.

It is possible to use the FES-based KBE approach to make FFR assessments of the equipment installed in a subsea system, focussing on potential functional failures and related consequences. It is possible to integrate the aforementioned approach in an engineering service provider’s existing structured information management system or in the computerized maintenance management system (CMMS) available in an asset owner’s industrial organization.

The FES-based KBE approach provides a consistent way to incorporate actual circumstances at the boundary of the input ranges or at the levels of linguistic data and risk categories. It minimizes the variations present in the assessments.

The FES-based KBE approach has been demonstrated in relation to the requirements and guidelines specified in DNV standard DNV-RP-F116 and NORSOK standard Z-008. The suggested KBE-based FES that has been utilized for FFR assessment allows the relevant quantitative and qualitative data (or information) related to equipment installed in subsea systems to be employed in a coherent manner with less variability, while improving the quality of inspection and maintenance recommendations.

Regular and repeatable surveys of submarine pipelines are necessary to give the designers of CP systems greater knowledge with which to design more efficient systems and so that maintenance can be more effectively planned. Mark Scorer, Subsea Survey Manager of Corrintec/UK, here describes the survey options available and goes on to explain the high level service and ease of operation of the Corrintec CPSS4 survey system, an enhanced version of the SS3 used extensively last year.

The purpose of this paper is to propose a multi-variable analysis (MVA) model for predicting potential delays in the delivery of subsea inspection, maintenance and repair (IMR) services.

Based on data from 351 subsea IMR service jobs executed between 2006 and 2008, a MVA model is proposed for predicting the potential delays in the delivery of IMR services in different plausible scenarios.

A model for predicting the delays in IMR service delivery, based on four practical variables that are readily available during the planning phase, was developed and tested. The factors contributing to delays in petroleum subsea IMR services based on importance are: water depth, weather, job complexity, job uncertainty as well as job complexity mix.

The MVA model is developed based on analyzing subsea IMR service jobs performed in the petroleum industry from 2006-2008. The model can be used in the planning stage to predict potential delays in service delivery based on practical variables available.

The research proposes a MVA model for predicting delays in service delivery. The model is useful for predicting potential delays in service delivery and for improving the plan based on model analysis results.

Corrosion monitoring and inspection is commonly done in industry, for a wide range of applications: