Search results

The paper aims to develop an efficient data-driven modeling approach for the hydroelastic analysis of a semi-circular pipe conveying fluid with elastic end supports. Besides the structural displacement-dependent unsteady fluid force, the steady one related to structural initial configuration and the variable structural parameters (i.e. the variable support stiffness) are considered in the modeling.

The steady fluid force is treated as a pipe preload, and the elastically supported pipe-fluid model is dealt with as a prestressed hydroelastic system with variable parameters. To avoid repeated numerical simulations caused by parameter variation, structural and hydrodynamic reduced-order models (ROMs) instead of conventional computational structural dynamics (CSD) and computational fluid dynamics (CFD) solvers are utilized to produce data for the update of the structural, hydrodynamic and hydroelastic state-space equations. Radial basis function neural network (RBFNN), autoregressive with exogenous input (ARX) model as well as proper orthogonal decomposition (POD) algorithm are applied to modeling these two ROMs, and a hybrid framework is proposed to incorporate them.

The proposed approach is validated by comparing its predictions with theoretical solutions. When the steady fluid force is absent, the predictions agree well with the “inextensible theory”. The pipe always loses its stability via out-of-plane divergence first, regardless of the support stiffness. However, when steady fluid force is considered, the pipe remains stable throughout as flow speed increases, consistent with the “extensible theory”. These results not only verify the accuracy of the present modeling method but also indicate that the steady fluid force, rather than the extensibility of the pipe, is the leading factor for the differences between the in- and extensible theories.

The steady fluid force and the variable structural parameters are considered in the data-driven modeling of a hydroelastic system. Since there are no special restrictions on structural configuration, steady flow pattern and variable structural parameters, the proposed approach has strong portability and great potential application for other hydroelastic problems.

The purpose of this paper is to integrate the findings of articles appearing in European Journal of Marketing’s special section on covariance-based versus composite-based structural equations modeling (SEM).

This is an editorial which uses literature review to draw conclusions regarding areas of agreement, areas for further research, and changing the discussion around composite-based SEM methods.

There are now four new areas of agreement regarding composite-based SEM. Researchers should adopt a toolbox approach to their methods and know the strengths and weaknesses of the research tools in their toolbox. Partial least squares (PLS) SEM and covariance-based SEM are not substitutes, and it is inappropriate to use the language of confirmatory factor analysis (CFA) in reporting measurement estimates from PLS SEM. Measurement matters and researchers need to devote effort to using reliable and valid multi-item measures in their investigations.

This postscript article outlines recommendations for authors, reviewers and editors regarding the analysis of data and reporting of results using structural equations models.

Structural equation modeling (SEM) is a well-established and frequently applied method in various disciplines. New methods in the context of SEM are being introduced in an ongoing manner. Since formal proof of statistical properties is difficult or impossible, new methods are frequently justified using Monte Carlo simulations. For SEM with covariance-based estimators, several tools are available to perform Monte Carlo simulations. Moreover, several guidelines on how to conduct a Monte Carlo simulation for SEM with these tools have been introduced. In contrast, software to estimate structural equation models with variance-based estimators such as partial least squares path modeling (PLS-PM) is limited.

As a remedy, the R package cSEM which allows researchers to estimate structural equation models and to perform Monte Carlo simulations for SEM with variance-based estimators has been introduced. This manuscript provides guidelines on how to conduct a Monte Carlo simulation for SEM with variance-based estimators using the R packages cSEM and cSEM.DGP.

The author introduces and recommends a six-step procedure to be followed in conducting each Monte Carlo simulation.

For each of the steps, common design patterns are given. Moreover, these guidelines are illustrated by an example Monte Carlo simulation with ready-to-use R code showing that PLS-PM needs the constructs to be embedded in a nomological net to yield valuable results.

The aim of this paper is to study the effect of strategic and project related potential risks on project delivery in Qatar. Two objectives have been defined. The first is to identify potential risk indicators (manifest variables) and categorize them (constructs/latent variables) based on a literature review, while the second is to examine and rank the relationships between the indicators and constructs by developing a structural equation model.

Twenty-five indicators were identified from the literature review and categorized into five groups. To collect the data, an online questionnaire was distributed in Qatar, and 116 responses were obtained. Structural equation modeling (SEM) was used to examine the model. The model that was developed based on the research hypothesis met goodness-of-fit, reliability and validity requirements.

The results showed that all constructs contributed well to the model and that the project parties (PPs) have the highest contribution with an effect weight of 0.209 followed by economic and legal (EL) conditions with an effect weight of 0.205. Site and safety (SS) conditions were third with an effect weight of 0.200 while environmental, natural and technological (ENT) conditions were fourth with an effect weight of 0.1989. The last ranked construct is political and social (PS) conditions with an effect weight of 0.186. Based on the outcome of the SEM, recommendations were provided to industry professionals in Qatar about mitigating the impact of potential risks on construction project.

To the authors' best knowledge, this is the first study to quantify the effects of strategic and project related risks on a construction project using SEM, considering the risk management indicators of SS, EL, ENT, PS in Qatar. The study's practical implications are to enlarge the project's risk management plan by considering the strategic and project related risks to enhance the project performance for the cost overrun and delay. The study is intended for construction projects in Qatar, but it can easily be adapted to other parts of the world given the local circumstances.

The purpose of this study is to discuss the construction of a structural measurement model utilizing structural equation modelling (SEM) to confirm the link between Industry 4.0 technologies, sustainable manufacturing practices and organizational sustainable performance. Relationship among the paradigm has yet to be fully investigated, necessitating a more conceptual and empirical examination on what impact they have on organizational sustainable performance when used together.

Industry 4.0 and sustainable production practices aim to progress a company's business competitiveness, forming sustainable development that benefits manufacturing companies. The aim of the study is to analyze the relationship between constructs that lead to operational excellence in firms that use Industry 4.0 technologies and sustainable manufacturing techniques. Experts from diverse automotive industries, who are applying both Industry 4.0 and sustainable manufacturing practices, provided data for the study.

Statistical estimations (hypotheses) are created to substantiate the measurement model that has been developed. The structural model was analysed, and the findings were discussed. The statistical estimate is either approved or rejected based on the findings. According to the conclusions of this study, strong link exists between Industry 4.0 technologies and sustainable manufacturing practices that affect organizational sustainable performance environmentally, economically and socially.

The research was conducted in the framework of automobile component manufacturing companies in India. The outcomes of the study are practically feasible.

The authors' novel contribution is the construction of a structural model with Industry 4.0 technologies and sustainable manufacturing practices into account.

This study aims to evaluate the usage of partial least squares structural equation modeling (PLS-SEM) in journals related to logistics and supply chain management (LSCM).

Based on a structured literature review approach, the authors reviewed 401 articles in the field of LSCM applying PLS-SEM published in 15 major journals between 2014 and 2022. The analysis focused on reasons for using PLS-SEM, measurement model and structural model evaluation criteria, advanced analysis techniques and reporting practices.

LSCM researchers sometimes did not clarify the reasons for using PLS-SEM, such as sample size, complex models and non-normal distributions. Additionally, most articles exhibit limited use of measurement models and structural model evaluation techniques, leading to inappropriate use of assessment criteria. Furthermore, progress in the practical implementation of advanced analysis techniques is slow, and there is a need for improved transparency in reporting analysis algorithms.

This study contributes to the field of LSCM by providing clear criteria and steps for using PLS-SEM, enriching the understanding and advancement of research methodologies in this field.

In their paper titled “A Miracle of Measurement or Accidental Constructivism? How PLS Subverts the Realist Search for Truth,” Cadogan and Lee (2022) cast serious doubt on PLS’s suitability for scientific studies. The purpose of this commentary is to discuss the claims of Cadogan and Lee, correct some inaccuracies, and derive recommendations for researchers using structural equation models.

This paper uses scenario analysis to show which estimators are appropriate for reflective measurement models and composite models, and formulates the statistical model that underlies PLS Mode A. It also contrasts two different perspectives: PLS as an estimator for structural equation models vs. PLS-SEM as an overarching framework with a sui generis logic.

There are different variants of PLS, which include PLS, consistent PLS, PLSe1, PLSe2, proposed ordinal PLS and robust PLS, each of which serves a particular purpose. All of these are appropriate for scientific inquiry if applied properly. It is not PLS that subverts the realist search for truth, but some proponents of a framework called “PLS-SEM.” These proponents redefine the term “reflective measurement,” argue against the assessment of model fit and suggest that researchers could obtain “confirmation” for their model.

Researchers should be more conscious, open and respectful regarding different research paradigms.

Researchers should select a statistical model that adequately represents their theory, not necessarily a common factor model, and formulate their model explicitly. Particularly for instrumentalists, pragmatists and constructivists, the composite model appears promising. Researchers should be concerned about their estimator’s properties, not about whether it is called “PLS.” Further, researchers should critically evaluate their model, not seek confirmation or blindly believe in its value.

This paper critically appraises Cadogan and Lee (2022) and reminds researchers who wish to use structural equation modeling, particularly PLS, for their statistical analysis, of some important scientific principles.

Despite several research efforts tackling construction project risks globally, tertiary education building projects are not devoid of experiencing risks with cascading effects on projects. In the past decades, there has been increasing application of linear assessments of risks in construction risk management practices. However, this study aims to assess the influence of risk factors on the success of tertiary education building projects using a structural equation modelling approach. This study will further reinforce the risk factors that require attention because risk factors are not linear but interdependent.

A quantitative research method was undertaken in this study, where data collection was achieved via a structured questionnaire survey. In total, 452 questionnaires were administered to client representatives, consultants and contractors involved in executing tertiary education building projects across five public tertiary education institutions in Ondo State, Nigeria. Of 452 questionnaires, 279 were found usable for the analysis, implying a response rate of 61.73%. The Cronbach α test, average variances extracted and composite reliabilities values show high reliability and internal consistency of the instrument used for data gathering. Furthermore, the study adopted percentile, mean, correlation, regression analysis and structural equation modelling for analyzing the data collected upon which the study’s inferences were based.

The study found that three out of six criteria for measuring the success of tertiary education building projects were significantly affected by risk factors while using the structural equation modelling technique. With this non-linear method of assessment, completion to time was significantly impacted by environmental risk factors. In addition, safety performance was also significantly influenced by logistic, environmental and legal risk factors; furthermore, logistics, design and environmental risks significantly affected profit. However, completion to cost, standard/quality and end-user satisfaction was not significantly affected by the risk factors in tertiary education building projects.

The quantitative data used for the analysis are limited to the tertiary education building projects from selected five tertiary education institutions in Ondo State; therefore, the results do not indicate all tertiary institutions in Nigeria. In addition, the findings are based on building projects that were procured through a competitive tendering arrangement only and thus considered a limitation for this study.

Not all the risks significantly influence the tertiary education building projects. Therefore, risk factors with a significant effect on the success indicators of tertiary education building projects should be prioritized for a successful project. While risk factors have not affected the completion to cost per se, the study implies that the resultant effect of risks on other success indicators could have a cascading effect on these projects in terms of cost and time overruns. These results may assist during the project risk management while also addressing complexity and uncertainty to avoid chaos in a tertiary education building projects.

The study found significant construction risk factors impacting the success of tertiary education building projects using a non-linear methodology, an extension beyond the usual linear method of assessment of risk impacts on the project performance.

The purpose of this study is to validate an explanatory structural equation model for the evaluation of territorial branding tourism policies for local development and its application in cities in Mexico and Colombia.

A sample was calculated for finite populations of residents in the municipalities of Girón Santander, Colombia and El Fuerte, Sinaloa, Mexico, of 125 individuals for each locality, in total, 250 individuals. The study includes three latent variables, which in turn constitute three models (Model 1: State and Public Policies; Model 2: Territorial Brand for Development; Model 3: Local Development) to explain the multiple relationships with the observable variables. The results were analyzed by using IBM AMOS software (SPSSS Extension), using the maximum likelihood method.

Multiple relationships between the variables were evident, with excellent to acceptable indices. Model 1 (CMIN/DF = 1.742; CFI = 0.948; RMSEA = 0.057; PClose = 0.059) Model 2 (CMIN/DF = 1.528; CFI = 0.921; RMSEA = 0.073; PClose = 0.044). Model 3 (CMIN/DF = 3.210; CFI = 0.951); RMSEA = 0.057; PClose = 0.049), obtaining an adequate fit. The correlations between the variables reveal that the tourism policy is weak in both contexts, in its implementation in terms of the participation of residents in decision-making with respect to the management of the policy and in the lack of education and training of collaborators/workers to provide a better tourism service.

It was possible to establish that the measurement model is applicable in the municipalities of the two countries by considering the similarities in tourism policies, as well as the differences (social, cultural, political and economic), but with a need for explicit articulation between the pillars of the territorial brand with the legitimized public policy.

This study contributes to the generation of new knowledge in relation to territorial branding from residents, within the framework of a tourism policy, allowing to establish its limitations in terms of implementation.

This paper studies the critical factors from the perspectives of technological quality, personal compatibility and organisational commitment using the technological adoption framework (TAF). The proposed TAF studies the critical factors that influence the intention to use building information modelling (BIM) taking into consideration of the “Perceived Ease of Use (PEU)” and “Perceive Usefulness (PU).”

The proposed study is a quantitative research study using the TAF model and the statistical analysis using “Partial Least Squares-Structural Equation Modelling (PLS-SEM).” The questionnaires are developed based on the literature review study and disseminated to the stakeholders in the Malaysian construction industry, including consultants, contractors, and clients. The data collected are analysed using PLS-SEM to identify the correlation between the critical factors influencing BIM adoption and the moderation influence of the PEU and PU towards the “Intention to Use (IU)” BIM.

The data collected from 185 construction industry stakeholders in Malaysia was utilised to develop the structural equation model. The measurement model was analysed in terms of composite reliability, discriminant validity, and collinearity issues. Subsequently, the SEM is analysed, and the findings on the hypothesis on the correlation between the critical factors and the intention to use BIM are examined. The study also examines the mediation effects of the PEU and PU towards the BIM adoption in the Malaysian construction industry.

This research conceptual framework, TAF, is derived from the integration of the existing underpinning theories of the technological adoption model and the technology–organisation–environment framework. This new TAF can be used for the study of new technology adoption. This cross-sectional research study is in line with the “Construction 4.0 Strategic Plan” in Malaysia to establish the current BIM adoption scenario and formulate the framework to promote incentives to promote BIM adoption.